Mailbox migration failed: MapiExceptionJetErrorPageNotInitialized: Unable to find table row

Hi Everyone,
I'm trying to migrate mailboxes from 2010 -> 2013 and I've com across an odd error.
I've put my skip limit to 5(for bad files), however this error seems to appear regardless. I'm not a Jets DB expert, but not being able to find a row seems quite serious. Any ideas?
Data migrated: 1004 MB (1,052,931,906 bytes) 
Migration rate: 0 B (0 bytes) 
Error: MigrationPermanentException: Error: MapiExceptionJetErrorPageNotInitialized: Unable to find table row. (hr=0x80004005, ec=-1019) Diagnostic context: ...... Lid: 52176 ClientVersion: 15.0.516.30 Lid: 50032 ServerVersion: 14.3.123.2 Lid: 23226 --- ROP
Parse Start --- Lid: 27962 ROP: ropGetContentsTable [5] Lid: 27962 ROP: ropSetColumns [18] Lid: 17082 ROP Error: 0xFFFFFC05 Lid: 27489 Lid: 21921 StoreEc: 0xFFFFFC05 Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid: 1238 Remote
Context Overflow Lid: 8756 StoreEc: 0xFFFFFC05 Lid: 58765 StoreEc: 0xFFFFFC05 Lid: 48425 StoreEc: 0xFFFFFC05 Lid: 6995 StoreEc: 0xFFFFFC05 PropTag: 0x67B50102 Lid: 4819 StoreEc: 0xFFFFFC05 Lid: 17692 Lid: 5587 StoreEc: 0xFFFFFC05 PropTag: 0xC1A84B0 Lid: 13300
StoreEc: 0xFFFFFC05 Lid: 21097 Lid: 39027 dwParam: 0x6BD Lid: 8756 StoreEc: 0xFFFFFC05 Lid: 58765 StoreEc: 0xFFFFFC05 Lid: 48425 StoreEc: 0xFFFFFC05 Lid: 5459 StoreEc: 0xFFFFFC05 PropTag: 0xC1A84B0 Lid: 6483 StoreEc: 0xFFFFFC05 PropTag: 0xC1A84B0 Lid: 59073
StoreEc: 0xFFFFFC05 Lid: 28220 Lid: 52321 StoreEc: 0xFFFFFC05 Lid: 46177 dwParam: 0xBFE629 Lid: 35937 StoreEc: 0xFFFFFC05 Lid: 44129 dwParam: 0x1183C6F Lid: 60513 StoreEc: 0xFFFFFC05 Lid: 48225 Lid: 9253 StoreEc: 0xFFFFFC05 Lid: 28104 Lid: 13861 StoreEc: 0xFFFFFC05
Lid: 27265 StoreEc: 0xFFFFFC05 Lid: 1750 ---- Remote Context End ---- Lid: 27962 ROP: ropFindRow [79] Lid: 17082 ROP Error: 0xFFFFFC05 Lid: 23649 Lid: 21921 StoreEc: 0xFFFFFC05 Lid: 27962 ROP: ropExtendedError [250] Lid: 1494 ---- Remote Context Beg ---- Lid:
26426 ROP: ropFindRow [79] Lid: 40685 StoreEc: 0xFFFFFC05 Lid: 28720 Lid: 11621 StoreEc: 0xFFFFFC05 Lid: 56781 StoreEc: 0xFFFFFC05 Lid: 21484 Lid: 23788 StoreEc: 0xFFFFFC05 Lid: 1750 ---- Remote Context End ---- Lid: 26849 Lid: 21817 ROP Failure: 0xFFFFFC05
Lid: 29726 Lid: 18462 StoreEc: 0xFFFFFC05 

Hi,
From your description, if you specify a larger value for the bad items limit, this error will disappear. Then the issue should be related to the corrupt mailbox, such as the subfolder property and so on, you can use MFCMAPI to check them and then remove
problematic folders.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

  • Backint failed "ERROR: unable to find file "

    Hello
    I try to backup Oracle database 10.2 with netbackup tools on Redhat 2.6.18-53
    I got errror:
    BR0231E Backup utility call failed
    ERROR: unable to find file /oracle/BWP/sapdata4
    Can u help me
    Regards
    Fethi

    This is the backup logfile:
    BR0477I Oracle pfile /oracle/BWP/102_64/dbs/initBWP.ora created from spfile /oracle/BWP/102_64/dbs/spfileBWP.ora
    BR0101I Parameters
    Name                           Value
    oracle_sid                     BWP
    oracle_home                    /oracle/BWP/102_64
    oracle_profile                 /oracle/BWP/102_64/dbs/initBWP.ora
    sapdata_home                   /oracle/BWP
    sap_profile                    /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.sap
    backup_mode                    ALL
    backup_type                    offline
    backup_dev_type                util_file
    util_par_file                  /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
    system_info                    orabwp/orabwp hpbwpdb2 Linux 2.6.18-53.1.19.el5 #1 SMP Tue Apr 22 03:01:10 EDT 2008 x86_64
    oracle_info                    BWP 10.2.0.2.0 8192 30 88160883 hpbwpdb2 WE8DEC UTF8
    sap_info                       700 SAPSR3 BWP S1329078236 R3_ORA 0020159289
    make_info                      linuxx86_64 OCI_102 Feb  8 2008
    command_line                   brbackup -c force -p initBWP_sapdata_offline.sap
    BR0116I ARCHIVE LOG LIST before backup for database instance BWP
    Parameter                      Value
    Database log mode              No Archive Mode
    Automatic archival             Disabled
    Archive destination            /oracle/BWP/oraarch/BWParch
    Archive format                 %t_%s_%r.dbf
    Oldest online log sequence     27
    Next log sequence to archive   30
    Current log sequence           30               SCN: 88160883
    Database block size            8192             Thread: 1
    Current system change number   88168768         ResetId: 655409152
    BR0118I Tablespaces and data files
    Tablespace     TS-Status  F-Status  File                                                       Size   Id.     Device  Link    Type       MaxSize     IncrSize  BlkSize
    PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data1                      17498636288    4       64785  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data2                      16450060288    5       64785  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP        ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM.data3                      15820914688    6       64785  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWM700.data1                   15128862720   11       64784  NOLINK  FILE   34359721984    104857600     8192
    PSAPBWP700     ONLINE*    ONLINE+   /oracle/BWP/sapdata4/BWM700.data2                    4132511744   12       64785  NOLINK  FILE   34359721984         8192     8192
    PSAPBWPDIM     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMdim.data1                    4202700800    7       64770  NOLINK  FILE   10485760000     20971520     8192
    PSAPBWPFACT    ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMfact.data1                   6719283200    8       64770  NOLINK  FILE   34359721984     20971520     8192
    PSAPBWPODS     ONLINE*    ONLINE+   /oracle/BWP/sapdata2/BWMods.data1                   19868426240    9       64784  NOLINK  FILE   34359721984     20971520     8192
    PSAPBWPUSR     ONLINE*    ONLINE+   /oracle/BWP/sapdata1/BWMusr.data1                     239083520   10       64770  NOLINK  FILE   10485760000     20971520     8192
    PSAPSR3USR     ONLINE+    ONLINE+   /oracle/BWP/sapdata4/sr3usr_1/sr3usr.data1            134225920   20       64785  NOLINK  FILE   10485760000     20971520     8192
    PSAPTEMP       ONLINE#    ONLINE+   /oracle/BWP/sapdata1/temp_1/temp.data1              10485768192   -1       64770  NOLINK  FILE   34358689792     20971520     8192
    PSAPUNDO       ONLINE-    ONLINE+   /oracle/BWP/sapdata1/undo_1/undo.data1               1073750016    2       64770  NOLINK  FILE   34359721984     20971520     8192
    SYSAUX         ONLINE*    ONLINE+   /oracle/BWP/sapdata1/sysaux_1/sysaux.data1            671096832    3       64770  NOLINK  FILE   10485760000     20971520     8192
    SYSTEM         ONLINE*    SYSTEM+   /oracle/BWP/sapdata1/system_1/system.data1            838868992    1       64770  NOLINK  FILE   10485760000     20971520     8192
    BR0119I Redo log files
    File                                                Size  Group     Device  Status    Link    Type
    /oracle/BWP/origlogA/log_g11m1.dbf              52429312    1        64774  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogA/log_g11m2.dbf              52429312    1        64776  INUSE     NOLINK  FILE
    /oracle/BWP/origlogB/log_g12m1.dbf              52429312    2        64775  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogB/log_g12m2.dbf              52429312    2        64777  INUSE     NOLINK  FILE
    /oracle/BWP/origlogA/log_g13m1.dbf              52429312    3        64774  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogA/log_g13m2.dbf              52429312    3        64776  INUSE     NOLINK  FILE
    /oracle/BWP/origlogB/log_g14m1.dbf              52429312    4        64775  INUSE     NOLINK  FILE
    /oracle/BWP/mirrlogB/log_g14m2.dbf              52429312    4        64777  INUSE     NOLINK  FILE
    BR0120I Control files
    File                                                Size   Id.      Device  Link    Type
    /oracle/BWP/origlogA/cntrl/cntlrBWP.dbf         34979840    0        64774  NOLINK  FILE
    /oracle/BWP/origlogB/cntrl/cntrlBWP.dbf         34979840    0        64775  NOLINK  FILE
    /oracle/BWP/sapdata1/cntrl/cntrlBWP.dbf         34979840    0        64770  NOLINK  FILE
    BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
    PSAPBWP, PSAPBWP700, PSAPBWPDIM, PSAPBWPFACT, PSAPBWPODS,
    PSAPBWPUSR
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
    BR0057I Backup of database: BWP
    BR0058I BRBACKUP action ID: bdxzgdlt
    BR0059I BRBACKUP function ID: aff
    BR0110I Backup mode: ALL
    BR0077I Database files for backup:
    /oracle/BWP/origlogA/log_g11m1.dbf
    /oracle/BWP/origlogB/log_g12m1.dbf
    /oracle/BWP/origlogA/log_g13m1.dbf
    /oracle/BWP/origlogB/log_g14m1.dbf
    /oracle/BWP/origlogA/cntrl/cntlrBWP.dbf
    BR0061I 19 files found for backup, total size 108250.510 MB
    BR0143I Backup type: offline
    BR0130I Backup device type: util_file
    BR0109I Files will be saved by backup utility
    BR0134I Unattended mode with 'force' active - no operator confirmation allowed
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.26
    BR0307I Shutting down database instance BWP ...
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0308I Shutdown of database instance BWP successful
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0229I Calling backup utility with function 'backup'...
    BR0278I Command output of '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c':
    WARNING: unknown parameter: print_log_flag 1
    WARNING: sort_backup_type not specified in .utl file
    WARNING: default sort_backup_type to <size> for restore
    Program:                /usr/sap/BWP/SYS/exe/run/backint 5.1
    Input File:             /oracle/BWP/sapbackup/.bdxzgdlt.lst
    Profile:                /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl
    Function:               BACKUP
    Backup Type:            BACKUP_FILE
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data1
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data2
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM.data3
    ERROR: unable to find file /oracle/BWP/sapdata2/BWM700.data1
    ERROR: unable to find file /oracle/BWP/sapdata4/BWM700.data2
    ERROR: unable to find file /oracle/BWP/sapdata1/BWMdim.data1
    ERROR: unable to find file /oracle/BWP/sapdata1/BWMfact.data1
    ERROR: unable to find file /oracle/BWP/sapdata2/BWMods.data1
    ERROR: unable to find file /oracle/BWP/sapdata1/temp_1/temp.data1
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0279E Return code from '/usr/sap/BWP/SYS/exe/run/backint -u BWP -f backup -i /oracle/BWP/sapbackup/.bdxzgdlt.lst -t file -p /oracle/BWP/102_64/dbs/initBWP_sapdata_offline.utl -c': 2
    BR0232E 0 of 19 files saved by backup utility
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.33
    BR0231E Backup utility call failed
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.35
    BR0304I Starting and opening database instance BWP ...
    BR0280I BRBACKUP time stamp: 2008-05-23 15.59.42
    BR0305I Start and open of database instance BWP successful
    BR0056I End of database backup: bdxzgdlt.aff 2008-05-23 15.59.33
    Thank you
    Regards

  • Import fails with unable to extend table CUSTOM.CASA_TRAN_HIST_UPLD by 6999

    Hi,
    I have taken export backup of table from 9.2.0.4 on AIX & trying to import in 11.1.0.7.0 on AIX
    while importing im getting the following error.
    ORA-01653: unable to extend table CUSTOM.CASA_TRAN_HIST_UPLD by 699912 in tablespace CUSTOM
    As the table size is 37G , total free space in tablespace is 40G,
    & no index on the table.
    following are sum lines from import file
    Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Export file created by EXPORT:V09.02.00 via direct path
    import done in US7ASCII character set and UTF8 NCHAR character set
    import server uses AL32UTF8 character set (possible charset conversion)
    export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
    . importing DATAMIG's objects into CUSTOM
    . . importing table "CASA_TRAN_HIST_UPLD"
    IMP-00058: ORACLE error 1653 encountered
    ORA-01653: unable to extend table CUSTOM.CASA_TRAN_HIST_UPLD by 699912 in tablespace CUSTOM
    IMP-00028: partial import of previous table rolled back: 62844421 rows rolled back
    IMP-00017: following statement failed with ORACLE error 1917:
    "GRANT SELECT ON "CASA_TRAN_HIST_UPLD" TO "BSGUSER""
    IMP-00003: ORACLE error 1917 encountered
    ORA-01917: user or role 'BSGUSER' does not exist
    Import terminated successfully with warnings.
    is there any to resolve the issue.
    how to change NCHAR set for import.
    Thanks

    Hello,
    which & how i can set character set for import.About the Character Set, it's a setting at the Database creation. You may check it by using the following query on the Source and Target Databases:
    select * from v$nls_parameters; The NLS_CHARACTERSET will give you the Character set of the Database.
    It cannot be changed easily. It may imply a Database creation and export/import of data ( see Note *225912.1* ).
    Else, when you export (with the Original Export/Import utility) it's recommended to set the NLS_LANG parameter.
    The NLS_LANG parameter has 3 components:
    - Language
    - Territory
    - Client Character Set
    A wrong setting of the NLS_LANG may lead to conversion. However starting with *9i* most data is exported with the Character Set of the Database regardless the NLS_LANG setting. The following note may give you some details about it:
    Export/Import and NLS Considerations [ID 15095.1]Hope this help.
    Best regards,
    Jean-Valentin

  • Exchange 2003 to 2010 mailbox migration fails

    I'm trying to move users from my single 2003 server to my 2010 3-node DAG.
    I get this error for several of the mailboxes I'm moving:
    Error: Mailbox changes failed to replicate. Database 33da328a-9b34-43ba-8914-1be08f143e17 doesn't satisfy the constraint SecondCopy because the commit time 2/14/2014 9:01:30 AM isn't guaranteed by replication time 2/14/2014 8:55:22 AM.
    When I manually kick off a move I notice the CQL and the RQL will sometimes get in the hundreds on my third server.
    I queued up about 40 users totaling about 45 GB to be moved last night and 11 of them failed with the above error.
    I have a very simple setup.
    3 servers
    1 DAG
    1 active DB and 2 passive copies
    All servers are virtualized with each running on a separate host
    Each VM is connected to a NetApp SAN via iSCSI
    All 3 VMs have 2 redundant connections per vNIC and are connected to 2 different switches
    All 3 VMs are local, none are remote
    The MSExchangeMailboxReplication.exe.config looks like this:
        MaxMoveHistoryLength = "2" 
        MaxActiveMovesPerSourceMDB = "5"
        MaxActiveMovesPerTargetMDB = "5"
        MaxActiveMovesPerSourceServer = "50"
        MaxActiveMovesPerTargetServer = "5"
        MaxTotalMovesPerMRS = "100"
    I know about setting the DataMoveReplicationConstraint to None trick but I don't think I need to do that since none of my databases are on a WAN.  Shouldn't my local moves be able to keep up?  That sounds like a band-aid and not a true fix
    to the underlying problem.
    Could this be an issue with the source server's disk speed?
    I've turned the firewalls off on all the servers but still encountered the errors.
    My content indexes are healthy.
    I've checked the switches and the VMware servers for misconfigurations and errors.
    I'm researching the various PerfMon counters to watch now to see if it could be disk-related.

    I've been watching this server over the past couple of days and researching the performance output.
    ==========
    Good Server:
    Physical Disk: Avg. Disk sec/Read (DB): Usually between 10 and 50
    Physical Disk: Avg. Disk sec/Write (LOGS): Less than 10
    Bad Server:
    Physical Disk: Avg. Disk sec/Read (DB): Constant spikes to 100 (1-2 times every 10 seconds)
    Physical Disk: Avg. Disk sec/Write (LOGS): Spikes to 30-40 2-3 times per 10 second interval
    The % Processor Time rarely hits 10
    The Avg. Disk sec/Transfer for C: is mostly 0
    Bytes Received/sec MAPI is less than 10 with spikes to 45.  This is a Passive node so that's to be expected.
    Bytes Received/sec iSCSI is 100 steady with no drops
    Bytes Receied/sec REPL is less than 10
    Bytes Sent/sec MAPI spikes from 10-20
    Bytes Sent/sec iSCSI usually stays at 100 with the occasional drop to 10
    Bytes Send/sec REPL is less than 10
    Output Queue Length for all three NICs is 0
    No Received or Outbound Packet Errors
    ==========
    The vSphere versions of both physical servers are identical as is all of the firmware.
    Regarding the guest OS on each, the good server has an older NIC (vmxnet3) driver, whereas the bad server has a newer driver.
    The iSCSI Initiator on each guest OS is the same version.
    The switch configs are identical for every iSCSI port and there are no errors on either.

  • Finding table row length using javascript in oa framework

    hi all,
    Can anybody suggest some idea to find out the table row length in js... but i had read the values by
    document.getElementByid('N3:checval:'+i).value etc etc.
    so can suggest me how to get the table row length in js or where can i find some examples on tables with javascript events associated with that.
    this is urgent..

    hi,
    Let me know ur target and what js function u have written for it. If you need to ask... getting no.of rows in js.... u can write in js :
    table=document.getElementById(<table id>);
    alert("rows>>"+table.rows.length);
    --Mukul                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

  • Mailbox migration failing after Upgrading CU5 - CU6

    hello fellow readers,
    we have an Exchange 2007 (latest needed Patchlevel) / Exchange 2013 CU6 Environment and are now having trouble migrating user mailboxes from the Ex2007 mailbox server to the new Ex2013 server.
    migration of the first boxes before applying CU6 went fine and smooth, but now all mailbox moves are stuck with the status "Qeued".
    a ps command "get-moverequeststatistics karl.treiber" brings the following
    Postfach 'Karl Treiber' wird zurzeit nicht verschoben. + CategoryInfo : InvalidArgument: (karl.treiber:MoveRequestIdParameter) [Get-MoveRequestStatistics], Mana gementObjectNotFoundException + FullyQualifiedErrorId : [Server=SERVERNAME,RequestId=bf51511d-c7b8-4b39-ad60-caa71015cc6c,TimeStamp=10.11.2014 11 :27:29] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 9B1AC428,Microsoft.Exchange.Management.Recipien tTasks.GetMoveRequestStatistics + PSComputerName : SERVERNAME.DOMAIN.local
    i'm guessing that this is correct, as the migration hasn't started yet. in somehow similar threads people suggest putting the BadItemLimit higher, so i tried running ps command "set-moverequest karl.treiber -baditemlimit 9999" bringing the following
    ARNUNG: Wenn ein Element nicht aus der Quelldatenbank gelesen oder in die Zieldatenbank geschrieben werden kann, wird
    es als beschädigt betrachtet. Wenn Sie für 'BadItemLimit' einen anderen Wert als Null angeben, fordern Sie an, dass
    Exchange diese Elemente nicht in das Zielpostfach kopiert. Nach Abschluss der Verschiebung sind diese beschädigten
    Elemente nicht im Zielpostfach verfügbar.
    Der Vorgang konnte nicht ausgeführt werden, weil keine Objekte des Typs
    'Microsoft.Exchange.MailboxReplicationService.TransactionalRequestJob' auf 'DC.DOMAIN.local' gefunden wurden.
    + CategoryInfo : NotSpecified: (:) [Set-MoveRequest], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : [Server=SERVERNAME,RequestId=ab82c24b-7914-4382-8de2-34462d4993b3,TimeStamp=10.11.2014 11
    :38:01] [FailureCategory=Cmdlet-ManagementObjectNotFoundException] 285DB966,Microsoft.Exchange.Management.Recipien
    tTasks.SetMoveRequest
    + PSComputerName : SERVERNAME.DOMAIN.local
    my guess is, that something is missing in AD - but what? DC replication is checked and working as normal. i looked up the AD object of the user, searchung for Exchange values, finding some connecting to mailbox
    moves, but none similar to "Microsoft.Exchange.MailboxReplicationService.TransactionalRequestJob".
    everything worked in CU5 -> after updating to CU6 we had serious issues with mailbox databases in dirty shutdown and called MS or help. as mentioned
    here this was a known error and they gave us the
    hotfix for that. the hotfix seemed to be so "hot" that it fixed the database problem but brought new ones, as the fix seems to not check Exchange installation path, assuming its always c:\Program Files\... (which it is not in our case).
    here they suggest to run "setup /preparedomain" again, but i am worried about possible new problems.
    has anyone suggestions what to check?

    Hello KidStealth,
    Please try the following steps:
    1. Configure the database:
    Get-MailboxDatabase | Set-MailboxDatabase –DataMoveReplicationConstraint None
    2. We can run prepare domain, it will not cause any issue as I know.
    3. Then we can try to move the mailboxes.
    If issue persists, in my experience, this issue could be related to the corrupted items within the mailbox folders, so please remove the old move request, start a
    new move request, use parameter “–verbose” behind the move request command, then check the detailed error message. Or we can check via command:
    Get-MoveRequestStatistics -Identity “mailbox_name” –IncludeReport | fl >C:\error.txt
    Please post the detailed error message. It it’s in English, I would appreciate it.
    Regards, Eric Zou

  • DMZ Client Deployment failing. Unable to find Management Point

    I'm trying to install SCCM 2012 R2 client to a server in our DMZ.  This server is in a workgroup.  I have been following this article
    http://nikifoster.wordpress.com/2011/01/31/installing-configmgr-clients-on-servers-in-a-dmz/ however the SCCM agent doesn't seem to be able to find the Management Point, which is on the internal LAN.
    Step so far
    1) Port 80 and Port 8530 opened on the firewall between the DMZ server and the Primary site server (bi-directionally).
    2) Host and LMHost file on the DMZ server updated with the IP address of the Primary site server (where the MP is located).
    3)Boundary created on the Primary site server to include the IP address of the DMZ server.
    4)Client install files copied locally to the DMZ server.
    5)Installed with the following command ccmsetup.exe /MP:servername SMSSITECODE=ABC DNSSUffix=contoso.com
    The client installs but does not pick up the correct site code.  On the site tab the settings are blank and I can't manually update them.  In the locationservices.log it looks like it assigns the server to the correct site and then the following
    error appears Failed to retrieve DNS service record.... Unable to to find Lookup MP in Registry,AD, DNS and WINS.
    I'm not using Certificates.  The DMZ server IP address can be resolved from the Management Point (which is the site server) and the DMZ server will resolve the Management Point address.
    Does anyone have any ideas what I've missed?
    Thanks in advance

    Also note the difference between /mp and SMSMP:
    http://blog.configmgrftw.com/ccmsetup-mp-and-smsmp/
    Both are required in this case.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Unable to find table

    Hi,
    I get the following exception while trying to execute a query
    com.sybase.jdbc2.jdbc.SybSQLException: Table_name not present.
    Specify owner.objectname....
    However the table does exist in the database.
    Also, this problem does not manifest always. After I shut down and restart the
    server/machine couple of times, it seems to work fine.
    Does anyone have an idea what the problem may be?
    Thanks,
    Priya

    Priya wrote:
    >
    Hi,
    Its doing neither.
    Simple preparedstatements (just select columns call involving joins) are executed.
    Thanks,
    PriyaOk, then it sounds like a Sybase driver/DBMS bug. Try to duplicate it with a simple
    standalone program using just the sybase driver.
    Joe
    >
    Joseph Weinstein <[email protected]> wrote:
    Priya wrote:
    Hi,
    I get the following exception while trying to execute a query
    com.sybase.jdbc2.jdbc.SybSQLException: Table_name not present.
    Specify owner.objectname....
    However the table does exist in the database.
    Also, this problem does not manifest always. After I shut down andrestart the
    server/machine couple of times, it seems to work fine.
    Does anyone have an idea what the problem may be?
    Thanks,
    PriyaIt may be that some of your code is either sending SQL like 'use tempdb'
    etc,
    to change the database context from what you expect, or the code is calling
    setCatalog(), which does the same thing.
    Joe

  • Unable to use table UI

    Dear Experts,
    I am unable to find table UI in my interactive form. I am using the NWDS version 7.0.13 and the ADLC version is 6.0. Do I need a higher version? Where I can get it?
    Also, I am facing some problem with design as I give the type of my subform as Flow so that if no data exists it won't take the space. But in this case, it's not allowing me to allign the ui's properly one above another. It is taking it as one after one.
    Please suggest you opinions in this regard.
    Helpful answers will be appreciated.
    Regards,
    Gaurav

    Gaurav,
    For developing SAP Interactive forms you need atleast Designer 7.1. Check this thread for more on same:-
    Error popup saying, "Could not start Layout Designer"
    Chintan

  • Unable to find migrated datasource in RSOSFIELDMAP

    Hi All,
    I had migrated the datasource 0RPM_PORT_BUCK_HIERARCHY to BW side but unable to find it in RSOSFIELDMAP.

    Hi Raman,
    ***Remove logsys and keep it as blank.
    OLTPSOURCE  -0RPM_PORT* and display the table data.***
    able to find only these.
    ***Can you share RSA1-->data source tree of your data source.***

  • Move Mailboxes from Exchange 2007 to Exchange 2013 (Could not find a valid mailbox migration for esta organization)

    Hi all, I am in full migration from Exchange 2007 to Exchange 2013 and everything went correctly.
    I have migrated several mailboxes and are working well. But a few days ago, when I try to migrate a mailbox I get the following error and can not migrate:
    "Could not find a valid mailbox migration for this organization"
    Do you know that you can be?
    regards
    Microsoft Certified IT Professional Server Administrator

    Hi,
    From your description, the issue should be related to the migration mailbox. I recommend you check if the following account is existed in ADUC.
    Migration.8f3e7716-2011-43e4-96b1-aba62d229136
    If this account does not exist, you need to run setup /prepareAD and then enable this migration mailbox to check the result.
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • Unable to find data in s677 table

    Hi I had maintained planned data in md63 for month 1-5 of 2012 but unable to find it in table s677, help.

    Hi Allen,
    Referring to replies:
    1. You entered values directly in MD63
    2. No updates in table-S677 or PBIM.
    Let me clarify few things.
    SIS-S677 is custom info structure (Not a standard SIS) designed to your requirement. That means you're working on S&OP Flexible Planning module.
    So as a prerequisite to this module you must maintain below mix of Config & master data:
    1. Sales Info Structure i.e. S677 with update groups & rules. To capture any sales history.
    2. Planning Type: It's config and Planning type defines the content and the layout of the lines in the planning table.
    3. Planning hierarchy: It's a Master data and is a combination of characteristic values based on the characteristics of one information structure.
    4. Planning Table: It's the place where a Planning is done.
    After all above set-up, you would be able to enter in Planning Table for planning the products.
    Steps for Planning/Forecasting:
    1. Based on your SIS Update groups & Rules, a S677 will be updated with sales quantities with Version-00 and same will be used to calculate forecast.
    2. Using forecast model setup, a forecasting can be run in Planning Table for a particular product.
    3. Forecast/planning values then will be saved in Planning Table. Once you save these values & come out of Planning Table, these values will be updated in S677 with version-A00.
    4. Then you need to transfer Forecast/Planning values to Demand Management from Planning Table.
    5. Check if values can be seen in Demand Management (MD63). If yes, a seperate SAP standard table-PBIM, PBHI etc. will be updated. These values in MD63 are called as Planned Ind Requirement (PIR).
    6. Once PIR can be seen in MD63, you can run MRP Run.
    7. Once MRP finished, you can go-ahead with further processing.
    This is how the complete scenario is. Check if it's okay and then revert if any further issue.
    Regards,
    Anup

  • HT4859 Last time I synced my IPad with my PC it migrated all my "Favorites" (about 100 folders) to the ICloud. I have searched and so far been unable to find out how to recover my "Favorites" list from the ICloud back to my PC. Any advice? Many thanks.

    Hi, Last time I synced my IPad with my PC, it (unknown to me) migrated all my PC "Favorites" (about 100 folders) to the ICloud.
    I have searched and so far been unable to find out how to recover my "Favorites" from the ICloud back to my PC. Any advice would
    be appreciated. Thank you.

    What did you do to get them synced to the Cloud.  Would that procedure help me get my favorites synced to my iPad2?

  • GRUB unable to find file, fails to install

    (FTP install via floppies, GRUB 0.96-1, installation via arch/setup utility)
    GRUB fails to install, giving the error message "Error: unable to find file" after checking for a file in /boot/grub (grub.menu IIRC), and quitting without further action. Menu.1st is there, but GRUB seems to want something else.

    There might be an issue relative to the used fs. I allways had problems if I tried to install grub into xfs or jfs partitions, and had to install lilo first during installation procedure. After first boot, I usually removed lilo and installed grub without any problems.

  • Apple mail problem message reads - Account removal failed with error: "The operation couldn't be completed. Unable to find an account for the UID given.".

    Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”.   - trying to remove account but get this message please help

    Try to remove the account in the Internet Accounts preference pane.

Maybe you are looking for

  • My ipod touch 3rd gen is not detected in itunes

    When my itunes updated to 10.5 version it hasn't detected my ipod..at first i can see it synching but after a while it disappeared.it's my first time to have this bug on my ipod..and i was worried because i could no longer update my ipod touch using

  • Can i use the iphone in Hong Kong?

    Can i use the iphone in Hong Kong?

  • Turning off the camera shutter sound

    How do you turn off the shutter sound of the camera? Even in vibrate only sound profile the camera still makes the noise when taking pictures.

  • Distributors Wanted - Make Over A Million In A Week !

     How To Make One Million In A Week! Do you want to be in wealth or in poverty ? Do you want to be a millionaire this week? This is what you have to do. 1. Make 10,000 pre orders for "Putin's Trusted Psychic Attunement" Written By Elizabeth Fernandez

  • Kernel Panic -- Graphics chip error! Restarted.

    Anyone out there seen ridiculous gfx card/kernel errors with Adobe CS2? My machine runs weird every time that I use Photoshop or Illustrator. Batches don't finish, and I have even been getting kernel panics lately. I would post it to Adobe, but kerne