Mailman Domain Problem... read many solutions... none work.

basically i have a subdomain that Mailman should be running off of as mail for the main domain is hosted on another machine (that the list can not be hosted on).
so (for example) this machine has : domain.tld and list.domain.tld
and a list called LIST.
i can send mail to [email protected] ... goes through fine and i receive the posting.
however... the "To:" header is listed as "[email protected]" and not the correct "[email protected]" this means when you "Reply All" you reply to the INCORRECT and nonexistent address.
i have run the :
+sudo /usr/share/mailman/bin/withlist -l -r fix_url LIST --urlhost=list.domain.tld+
a billion times it seems... and the problem remains. every possible setting says "list.domain.tld" and it never changes in the received mail at any point ever.
SA open. SA closed. service stopped. service started. at no point does that command make a difference for me.
from ALL the dozens of posts about what seems to be my exact problem... that command is given as the solution but i swear it isn't solutionizing it for me.
any suggestions as to where i am going wrong?
in addition... looking at the raw headers on the received mail... i see the correct list.domain.tld all over the place... but in addition to the bad "To:" i also have an incorrect "-bounces" address going to domain.tld instead of list.domain.tld.
thanks.
zeb.

Also tried typing this in the Terminal:
sudo kextunload /System/Library/Extensions/AppleHDA.kext
sudo kextload /System/Library/Extensions/AppleHDA.kext

Similar Messages

NEED HELP: No Sound / Audio "No Devices Found". Tried many solutions, none work

I have had this issue two months back, where my internal speakers just stopped working. I have tried all alternatives and what solved my problem was resetting SMC. This time around, I have been watching some videos when all of a sudden my laptop started acting really slow and was responding in delays for about 10-15 seconds and there was no sound. I quit Safari but that didn't help, so I restarted my laptop. After the restart, it keeps showing as "mute" whenever I try to increase/decrease the sound level.
I have tried the following:
Restarting
Inserting Headphones
Restarting again
Resetting PRAM
Resetting SMC
Deleting com.apple.BezelServices.plist
Shutting down coreaudiod in the Activity Monitor
Disabling Adobe Flash Player,
Re-installing OSX using the Command + R during startup
Also tried typing this in the Terminal:
sudo kextunload /System/Library/Extensions/AppleHDA.kext
sudo kextload /System/Library/Extensions/AppleHDA.kext
And restarting it another few times for a good measure.
I've got Mid-2012 Macbook Air and I do not have Boom.
This is getting pretty frustrating now.

Also tried typing this in the Terminal:
sudo kextunload /System/Library/Extensions/AppleHDA.kext
sudo kextload /System/Library/Extensions/AppleHDA.kext

IPhoto quit unexpectedly. Tried different solutions, none worked. Any suggestions?

Hello,
I have a 2012 non-retina Macbook Pro running OSX 10.8.4 and iPhoto '11 version 9.4.3.
My iPhoto was running fine until about a month ago. And just last week when I tried opening it, I got the "iPhoto quit unexpectedly" message. Since then I have tried many solutions as suggested in the forum but none worked for me. Here are the list of things I tried.
1. Tried reopening.
2. Tried to create a new library, but it wouldn't let me create one.
3. Tried holding the cmd + option keys while opening iPhoto had no effect.
4. Tried downloading iPhoto Library Manager and rebuilding. It didn't work.
5. Tried running in safe mode. It didn't work.
6. Tried logging in using Guest account. It didn't work.
7. Tried completely uninstalling iPhoto (including system files and hidden files) and reinstalling. Still didn't work.
8. Tried restoring iPhoto from my Time machine backup from a month ago. No luck.
All these solutions I tried resulted in the same "iPhoto quit unexpectedly" message.
Could somebody please help me out? If you need further information please ask me.
Thank you.

3. Tried holding the cmd + option keys while opening iPhoto had no effect.
What options did you run from the iPhoto Fix window?
2. Tried to create a new library, but it wouldn't let me create one.
Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

Cannot get Adobe Reader to load a PDF on Firefox. Tried all the recommended solutions, none work

Every time I try to download a PDF file from a website, I get an error message that "Adobe Acrobat/Reader cannot be opened in a web browser, close it and try again". I have uninstalled and re-installed both firefox and adobe reader as well, and then followed the suggestions again. Still doesn't work. I am running Windows XP

Also, sorry -- one more thought:
When I run through the "Troubleshoot compatibility" it tells me that something is incompatible ("issues found: Incompatible Application"). when it asks me, "which version of Windows did this program work on before?" it doesn't give me windows 7 as an option.
Help!

Problem updating catalog, from non-working Elements 8, to vs. 13.

I purchased and downloaded Photoshop Elements 13, Windows; upgrading from vs. 8. Can't update the Catalog file; got error message. Previous version of Elements will no longer open; that's why I bought new version.

Update: Spent a good part of a frustrating day on this - after Adobe refused assistance (via Chat); told me my only recourse was via forums. Fortunately, I seem to have solved the problem; in multiple steps, which were basically trial and error. Version 8 did start working again - really not sure what worked! But I messed with several things. Was able to make use of some of the tips I found in help menus, once that was solved, to convert my original catalog. Then to use Vs. 13, I figured out that you have to select something besides the default "ELive" (on the top bar), to have access to the Manage Catalogs menu, etc. This isn't mentioned anywhere, but it was a stumbling block for me.

SocketChannel problems reading from a non-blocking channel

why when I read a "big" message from the channel (SocketChannel.read(ByteBuffer)) I receive it cutted in more parts?

up

Can't login, publish site or log into site, going to the site point to the domain that leads to a non working site

please help

Hi Mieka,
Please reach out to the support team for assistance on this issue: http://helpx.adobe.com/contact.html?product=business-catalyst&topic=signing-in-to-my-accou nt-or-registering-my-product > "Still need help? Contact us."

MBP start up problems :( read many advices, but need more please help!

Hi, I have a year old MBP, I recently received a new battery from Apple through the battery exchange program. And I also bought a new RAM 2GB and added it on.
Recently, about 3 days ago, I noticed that I was having trouble starting up my mac os. A day later, it would not start up. However, using bootcamp, my Windows XP runs fine without any problems, although I have gotten one of those blue screens in the middle of studying.
These are the list of things I've done and tried:
1. PRAM reset - did not help
2. Removed ram individually and plugged it in different arrangements to see if it was a RAM problem - did not help
3. Repair permissions + disk - I tried this, it got stuck about 3/4 of the way, and it would not complete the process after 2 hours.
4. Archive and Install - I had an error during the process and could not continue.
5. fsck - I also had an error in the way, saying something about volume
6. Finally, the hardware test, I did not have any problems in my hardware.
Unfortunately, I am running out of ideas, if anyone can give me an advice on how to fix it, please help me!
Thank you

Hi goodboyy;
You never did update your profile or at least answer the question about exactly what model of MBP you are attempting to use and what version of operating system it is running so you are forcing us to guess at answers.
From the sounds of what you have done so far to me it is sounding like your hard drive is on it's last legs. If data is getting badly corrupted that quickly, it is usually a sign that sectors are going bad at a very fast rate. If it were mine, I would scan it for bad sectors with Tech Tools Pro or a similar utility.
Allan

YouTube login & linking problems - one possible solution

Rather than add this comment to one of the several topics concerning YouTube login and account linking problems, I'm starting this topic to isolate this particular problem and the solution that worked for me.
* SKIP TO LAST LINE FOR MY SOLUTION ->
The problem I experienced surfaced when I first tried to upload a video to YouTube from my iPhone 4. YouTube would no longer accept my YouTube password. My YouTube account was linked to my gmail.com account. Having read some of the suggestions in other threads, I unlinked the two accounts, but that did not help matters.
I signed out of the YouTube app in order to sign back in, as suggested elsewhere, but then I could no longer sign in to the YouTube app.
So I tried shutting down my iPhone and starting it up again, as was also suggested elsewhere. That didn't help.
So, exasperated, I went to the YouTube site and tried to change my YouTube account password to itself - and therein lay the solution! YouTube told me the password has to be 5 to 20 characters long and my (old) password was only 4 (because I had created my YouTube account long ago before they had that requirement.)
Once I set a new password that was long enough to satisfy this requirement, I was able to login to the YouTube app just fine and everything is working.
* The solution -> MAKE SURE YOUR YouTube PASSWORD IS LONGER THAN 4 CHARACTERS
Message was edited by: caf
Message was edited by: caf

No, it didn't work. After buying my MacBook Pro I updated everything including QT. As a result QT 7.2 simply didn't play any of my divx avi files. Before adopting the rude way, I obviously tried to update/replace all of the components including: Perian, DivX, Flip4mac. No way. I then forced a downgrade to ver. 7.1.6 using Pacifist (a package manager) and as a result I put the hole system in danger. It was in a total state of malfunction. I had to restore the system with the cd. Fortunately it kept my home! But I now run ver 7.1.6 and I do NOT have any intention to update it. I use Pro so I don't have any necessity of full screen support or else. Maybe if Apple will release a stable version I will consider the update. But for now, "nowing it is not installing it".

How can I save to web without getting error messages and having my computer tell me there is no memory or freezing up and shutting down? I've read many other suggestions but have tried those things and none have worked. I have photoshop 12.

Photoshop: Selecting Save for Web gives error: "Could not complete this operation. An unknown operating system error has occurred."
I have tried all of the solutions I've found, but none work for me or my two systems (windows 7 and windows 8.1)
Many times I get the message only when saving a web file that there is not enough memory: My windows 8 has 2 TB and 10 Gigs of ram. I took it into the shop to see if something was wrong with the hard drive or ram, but when I hooked up my windows 7, I'm having the exact same issues. Please help.
I tried this:
I set ram to 100%, I changed my preferences in editor to not run anything to do with auto analyzer, I renamed the file auto analyzer to put a space in as someone said to do... I even did the following...
Reset Photoshop's Save For Web preferences:
1. Quit Photoshop
2. Delete the "Adobe Save For Web 12.0 Prefs" file:
Mac: Users/[Username]/Library/Preferences/Adobe Save For Web 12.0 Prefs
Windows XP: Documents and Settings/[Username]/Application Data/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Windows 7 and Vista: Users/[Username]/AppData/Roaming/Adobe/Save For Web/12.0/Adobe Save For Web 12.0 Prefs
Whenever I "save for web" and save something to the root of C:/ it will work, but the next time I "save for web" it produces the error. I was able to fix it by going into User Account Control settings and scaling down to "never notify." It requires a reboot, but the next time I "saved for web" it worked fine.
If you do this, be sure to change the UAC back to "default" as it is a security measure.
FYI you will have to restart anytime you tweak UAC.
To change UAC in Win 7 go to control panel>Action Center>Change User Account Control Settings and drag the slider to "never notify."

Try this: press F10 or tap the Alt key to display the menu bar temporarily, then
View > Toolbars > Menu Bar
If that doesn't work, you could reset your toolbars to factory default using Firefox's Safe Mode. First, make a backup of your computer for safekeeping. To back up Firefox, see [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information].
Next, start Firefox in Firefox
[http://support.mozilla.com/kb/Safe+Mode Safe Mode], and check only the box to reset toolbars. Be careful not to "reset" anything else if you didn't back up.
Hope this helps.

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help...

Is my iPhone 4 greyed out wifi and non working bluetooth software or hardware... seems that the forums are full of this issue with no consistent or official answer. is it all coincidence that so many are having the problem? Please help... I have scoured the net trying everything the last few days.

Please correct your porfile: iPhone 4 do not have IOS 6.1.4.
The usual troubleshooting steps are, also remember to test it after every step:
1. Restart
2. Reset
3. Restore from backup
4. Restore as new.
If no joy, make an Appointment with the Apple genius and have them evaluate

I have a very bad problem with java I try many solution but all the solution failed

Hello friends,
My system 10.8.3 Macbook pro
I try many solution in the
Hello friends,
My system 10.8.3 Macbook Pro, I use Safari 6.0.3
Java is not working.
I try many solution in the internet but nothing work with me , And I feel very sad
One of the famous solution I try in this link: http://support.apple.com/kb/HT5559
I download Java OS x 2013-002 and Java 7.17
after that i do what is written here : http://support.apple.com/kb/HT5559 Also failed.
Sometime I think to sell my new Macbook Pro because of this problem
I hope that any one can help me ?
Thank you
Soso

I check what java I have by this way: https://service.parachat.com/knowledgebase/211/How-do-I-check-which-Java-version -is-installed-on-my-Mac.html
java version "1.6.0_43"
Java(TM) SE Runtime Environment (build 1.6.0_43-b01-447-11M4203)
Java HotSpot(TM) 64-Bit Server VM (build 20.14-b01-447, mixed mode)
sos-macbook-pro:~ so$

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?

Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
          Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
          Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
          Wake for Wi-Fi network access
and
          Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
          Enable Power Nap...
11. Reinstall OS X.

Mic In 2 on front panel don't working (but after many read, he don't working agai

Hi people !
So i've a little problem with my Mic In 2 on my front panel I/O. I'd a soundblaster X-Fi Xtrem music, and recently, i've upgrade her with an optional Front Panel I/O. The front panel work perfectly, and two days ago, after reinstate the PC, the MIC IN 2 don't work suddenly. This back MIC IN work perfectly, but no signal for the MIC IN 2 on front panel. I've reinstate the drivers (the last drivers on the creative official site), i activate the MIC, activate the potentiometer at max on front panel, activate the mic boost in windows xp audio panel, i try another entry (ligne IN, auxilary...) for this MIC 2, i check the AUDIO CONSOLE... but the MIC IN 2 entry is not activate.
I read many post, but waht's the Creative Mixer ? I don't have Creative Mixer but Creative Audio Console. If is the even of windows xp Audio panel, the Line 2 (call "Line IN" normally in my pc : yes i've txo "Line IN", one at left (not activate at the same time of microphone) and one at right (activate in the same time of microphone), she's activate...
The MIC IN 2 work, i'm sure, but i've no signal because this entry appear disable for me ( despite Windows Xp Audio Panel ),
Someone have a solution ?
Thanks in adavance
Message Edited by Claymenia on 04-20-2008 0:55 AM

i made work my MIC IN 2 in front panel, with removing jumper (dynamic mic), but i heard my mic but windows xp software (msn, teamspeak, skype...) do not receive a signal. this very strange, with removing jumper, the MIC IN 2 is activated on front panel hardware but no in software (audio panel windows xp).
If i desacti've the LINE IN 2 in audio panel of windows XP, the mic don't working (no hear) but if i desactivate Microphone, he work normally... (but for the two solution, windows xp don't receive any signal)
No idea ?
Message Edited by Claymenia on 04-20-2008 02:28 AM

Some pdf & doc won't download... tried fixes under 'FF keeps opening many tabs or windows' but none worked... these files open in Safari & Google Chrome.

Some pdf & doc files won't download. The "You Have Chosen to Open" pop-up appears but when I hit 'Save File", it goes away and the file is not saved. The corrupted files show up in mac download file as .part but don't show up in ff download file. Tried suggestions in "Firefox keeps opening many tabs or windows" on this website but none worked.

This is most likely Firefox's new "built in" PDF Viewer giving you the trouble.
First, in Firefox, type "about:config" (minus the quotes) in the address bar. This will open the Firefox configuration file. You'll see a warning. Click that you'll be careful, and open the configurer.
At the top there is a search bar. Type "js" (again, minus the quotes).
In the list of results you'll see pdfjsdisabled with a value of "false". Right click it and select Toggle to make it read "true".
Click Firefox>Preferences and under the Applications tab, scroll down to Adobe Acrobat Document. Click the drop down on the right side and choose "Use Adobe Reader (default)".
That should take care of it for you.

Mailman Domain Problem... read many solutions... none work.

Similar Messages

Maybe you are looking for