Mainconcept Mpeg Pro HD and Encore transcode problems with blu-ray
I wanted to use premiere pro to edit my HDV files and import them into Encore to produce Blu-ray discs without transcoding. I have tried the Mainconcept Mpeg Pro HD plugin 3.1 as this should provide smart transconding of the edited file. I have been having difficulty in exporting from Premiere a file which will import into Encore and to flag it as don't transcode for blu-ray.
I have only been able to get Encore to not transcode if the file is demultiplexed into seperate video and audio files and that the video file must be a program stream. Unfortunatly I can only get Mpeg Pro to export a transport stream and I have to multiplex it onto a program stream for Encore.
Is there a way to export from Mpeg Pro with smart transcoding a file which will not be transcoded by Encore.
Regards Trevor
If I choose the default BR disc export settings from the MainConcept MPEGPro export module, the file is automatically set to Multiplexing:None.
Is that what you are trying to do?
Another method to try is to make sure that the audio settings in a program stream from MPEGPro match the BR audio transcoding settings in Encore. If the audio is mismatched, then the whole file will be re-transcoded in Encore.
Similar Messages
-
Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!
For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download -
I have a sync problem when using Premiere Pro CS5 to burn Blu Ray DVDs and wondered if anyone has had similar problems and has found a simple solution.
Equipment: Panasonic HMC-150 (AVCHD), shot at 59.94 fps, 720. MacPro with operating system up to date, quad core, 16 GB RAM, Nvidia Quadro 4000. PP CS5 also has all current updates downloaded.
When the AVCHD files are imported, they tend to be out of sync by 8 to 22 frames. I manually resync and edit. Then burn a Blu Ray DVD using Encore and end up out of sync again. I must be doing something wrong but can't figure it out. At this point, the only solution I can think of is to try to figure out how far out of sync I am once the DVD is burned and offset the audio that amount before transcoding.
Has anyone encountered this problem before? Any suggestions?
Thanks.I have done some more tests and have determined that the problem only exists with Blu-ray. When I burn a non blu-ray dvd, video and audio remain in sync. I attempted to export to Final Cut Pro 7 using the export xml feature, but it doesn't work. I brought the original footage into FCP and burned a portion of it to blu-ray using the Share feature and there was no sync problem. So I guess my only alternative at this point is to re-edit the entire video in FCP.
In Premiere Pro I've checked to make sure that both the camera and the intake were set for no drop frame and they were. I've tried double checking the audio sync using the audio line out from the Mac rather than the firewire out to the Mackie Mixer, just in case there was a latency problem, which didn't seem logical and there wasn't any difference. It can't be a problem with the blu-ray burner since it works in FCP7. I'm running out of ideas of things I can tweak in Premiere, other than guessing just how far out of sync the program pushes the audio and then unlinking audio and pushing it the same number of frames the other direction before burning the blu-ray, but that will be hit and miss and it will start getting expensive throwing away blu-ray disks.
Any other ideas would be appreciated. Thanks. Jon -
Can anyone help? I've created a project that contains 2 edited movies. I have added a main menu, and given both movies a main menu marker, and an end marker. Normally on DVD's this would send you back to the main menu when each of the films were completed, but I cannot get this to work with Blu Ray. Am I missing something here? What happens in this case is that the Disc starts with the menu, but if you pick the first item, the film will play OK, but instead of reverting back to the main menu, it carries on and shows the next .. and on completion, just terminates - does not go to the menu. The same if you select the second item. it just plays through and terminates. It seems that the End markers are being ignored. Has anyone got any ideas ??
You can see how this product works by going to http://Muvipix.com and typing "DVD Architect" in the product search box. This will bring up a free 3-part Basic Training tutorial series where you can see the product demonstrated.
You can also see more and learn about my book here. -
having trouble with blue ant s4 and iphone 3g or 3gs. voice commands to call a contact bring up wrong contact or playes an a song. read there are problems with iphones and this device. any suggestions or fixs?
You welcome
-
Problems with blu-ray pop-up menus
I made the mistake of tacking this question/problem onto another similar post, so here it is again for some:
I got this error message near the end of the disc build:
Blu-ray Error: "fatal error". Code: "6", Note: "Graphics buffer underflows.
- Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
The blu-ray project I am working on is an 87 min live concert with about 8 other much shorter timelines. The main menu has 6 buttons with a motion background. There are few submenus as well, but the problem came when I started making pop-up menus for the various timelines.
This is the first project where I really had to explore the possibliltes and limitations of Encore's pop-up menus. I burned a test disc with just a basic pop-up menu to see how the menu's opacity would look over the final video. All the video assets were set to to transcode "Automatically". All audio assets are blu-ray compliant Surround ac3's or 16-bit stereo WAV's so could be left as "Don't Transcode". This disc burned perfectly.
I then went through the pretty involved process of making a final version of the main pop-up menus. The main concert's pop-up menu has 5 pages (including page 0). There are specific pop-up menus for other timelines, but those have no more than 2 pages. None of the menus have more than 10 buttons.
I tried to burn the disc, and it came back with the error above. After reading some other posts, I thought it was worth a try to delete the AuthorScriptHDMVSessions folder before starting a new burn since it was already filled with files from my test burn. That didn't help.
Any insight or recommendations would be greatly appreciated.
Thanks.After countless tests and research, I finally have a successfully burned blu-ray with WORKING multi-page pop-up menus (that I am happy with). Thank you to all the people who gave theoretical guidance and suggestions in emails and other posts. There has been no shortage of oddities and obstacles to overcome when just trying to make a simple blu-ray. Unfortunately, I did not have the time to accurately pinpoint what was causing the original error message. The project just needed to get done.
The main pop-up menu has 4 pages, with 13 buttons on each page. Only about 5 - 9 of the "buttons" on each page are actual buttons that link anywhere. The other buttons on each page only serve as the remaining pieces of the menu's background and cannot be accessed on the final disc. Totally ridiculous way to make the backgrounds for pop-up menus, but it works.
Some of the other things I learned regarding pop-up menus + Encore misc:
1. If at all possible, totally create a menu .psd BEFORE bringing it into an Encore project. Make the button order in the .psd what you want it to end up being in the end (bottom layer is button 1). If you start editing and saving order after it has been brought in, Encore will almost always revert it back to some strange (possibly original) button order. You will spend all your time re-routing button navigation and changing their numbers, only to find out later that Encore has changed it all back without notice.
2. As many people state, it is best to have Encore do as little thinking as possible. All of my button groups originally had Text Layers within them with some fx applied. I merged each text layer down into that button's background layer to essentially rasterize the text with the fx applied. Each (+) button group therefore only had a higlight layer and a background layer. After doing this for all the buttons, the .psd file size was greatly reduced. Naturally I saved a copy before going through the merging process in case I ever had to go back and edit the text.
3. Originally the background for the pop-up menus were made from a rectangle cut-out of the background of the main menu. This was the width of the frame and around 1/5 of the height. I had changed the opacity to around 60%, and cut up the pieces to go with their respective buttons. For the final disc, I just made a shape with the Rounded Rectangle Tool, and filled it with a solid colour. It is probably only about half the size of the original pop-up menu's background. I changed its opacity as well, but then merged it with a blank layer so Encore didn't have to think about the opacity setting.
4. I encoded all the video elements BEFORE they were brought into the project. There are some issues with the way the file sizes are interpretted by Encore, but I won't trust it to encode anything again.
5. For some reason Encore wants to transcode 16-bit, 48.0 kHz .aiff files when making a blu-ray, but 16-bit, 48.0 kHz .wav files do NOT need trancoding (for both dvds and blu-rays). -
I have a 2012 Macbook Pro 13" and am having problems with the battery
Hi There, the battery in my laptop has already been replaced once because it had swollen and didn't allow me to click on the trackpad and recently after 96 charges and 5.2 months of use the health is 84.5% it has gone from a original capasity of 5770 to 4875 is this normal or should i take to to apple, OS X tell be the battery condition is normal and i dont know what to do?
Apple says that Unibody Macs batteries are designed to have 80% of their capacity after 1000 charges. Your battery has got 84.5% of its capacity after 96 charges, so it's clearly damaged, although OS X says that it's normal.
Personally, I would take the computer to an Apple Store or reseller again now to get your battery replaced again for free. That's because OS X may say that your battery is failing when the warranty has expired, and in this case, you will have to pay for this battery -
My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help
This morning i was not able to hear sound on my recently purchased macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput. -
Hi, Ive just got myself a Macbook Pro, and Im having problems with sound on movie files. The format is wmv and they play OK on a windows 7 laptop, and Im trying to play them now on the MAC. The picture is OK , but no sound. I have Flip4Mac - no diference
Download and install the free VLC for Mac - that should work:
http://www.videolan.org/vlc/download-macosx.html -
Problems burning Blu-Ray DVD with Encore CS6 Creative Cloud version
I recently installed Premiere Pro CS6 from Creative Cloud on a high performance PC. Everything works fine but Encore Blu-Ray burn will not finallize... get error message after most of disc is burned. Have tried several burns without success. Same files burn okay with Cyberlink software. Seems to be a bug with CS6 Encore files.
Have tried with Cyberlink removed from machine.... same problem.
Any suggestions??The error is: Blu-ray Error, "device error", Code "3", Note, "AS-StorageError = 97071
I imported one HD Blu-Ray MPG file encoded in Premiere Pro for Blu-Ray DVD about 4GB in size. It was set-up with simple "Play menu". It burns up to the point of finalization, then the above error message occurs.
I insstalled a second Blu-Ray burner (different brand) and attempted another burn but with same error message. Also tried different brand of discs.
I have a second computer that I had previously loaded the trial version of Permiere Pro CS6, then later opted to do complete install via Creative Cloud. CS6 Encore will burn a Blu-Ray disc on this system with the same file without any problem or error messages.
It seems to be a problem with the Creative Cloud installation on the first computer??? -
Can anyone tell me why I can not connect my Blackberry or my iPhone to my new Macbook pro? I had no problem with my old Macbook.
What type of headphones were you using? I have a set of Microssft headsets, with the built-in mic and connected via USB, and have no problems.
Clinton -
I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me
I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow. -
I am using my Ipad on a remote craftshow site and am having problems with battery lasting 8 hrs. Can I use a 12v rv battery to recharge it or at least maintain the charge over longer periods of time? I have a dc adapter. thanks
You should be able to use the battery if you get a car type charger which recharges mobile devices.
The full size iPads use a 10-12W charger, whereas the mini uses a 5W charger. Many car chargers only supply 5W. But at 5W, the car charger should give you some extra time on your iPad. It would be best to use a 10-12W car charger.
Cheers, Tom -
Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff
It is not possible to do that.
Allan -
OK WE HAVE DONE IT AN ORANGE PROTECTIVE SCREEN OVERLAY FOR IPOD AND IPAD STOPPING JOHN'S SEIZURES AND STOPPING EYE PROBLEMS WITH USAGE ABLE TO CUT ANY SIZE FOR PHONES EG
Contact me Steve the idea is great and the pictures are reveal a better depth perception of colour call me a Mum that created a diffence for her son and kept him communicating on his ipod and his ipad proffessors were amazed at childrens hospital and would love to show you my ideas in making it built in to your ipod and ipads or any computer for that matter everyone i show is blown away not only that but a wider customer level will be reached from a Mum that made a difference for her son that was unable to communicate and then had seizures so developed my own cover that allows him to chat all day without having any eye problems.
So we now sell the covers on ebay to help others access technology that they need in order to survive and live happily as without his ipod or ipad and him telling us what was wrong he would of died he had respritory lung disease photosensitive epilepsy a metabolic condition that could of killed him anytime from stroke or seizure battled with using all types of technology but now is a dream come true.
Would love for this to be enabled in the setup of all computers alike to protect eyes and allow more users to speak and communicate a big thankyou to the creators and designers fabulous but please can you call me as this could make you even better i mean will and also give me more time.
From one praying God fearing Mum
Nadine
Call me i do have better pics they were too big to upload orange covering on right hand sideGoing through the feedback and support pages will be a waste of your time. Apple won't respond to feedback, and support can't do anything regarding product suggestions, particularly not from a company with an existing product they wish to sell. The only attention you might get from Apple would be possible interest in selling your product through the Apple Stores, and I don't know how Apple chooses the third-party products they sell. All I could suggest would be writing to Apple's corporate headquarters:
Apple
1 Infinite Loop
Cupertino, CA 95014
with perhaps "Attention: Retail Sales Division" and telling them about your product and your interest in it being sold through the Apple Stores.
Regards.
Maybe you are looking for
-
Transfer my balance to someone else
Am I able to send my balance available in itunes store to someone else? I don't use itunes anymore, and want to send my balance to a friend so they can use it.
-
but still edit the paragraph spacing and letter and word spacing. Basicly I page and format books from authors before it gets to press and it would be nice not to have to worry about a stray keystroke adding a typo to preaproved text. is there anyway
-
LOV auto-completion is not working (1)
When the user types in a partial value in the messageLovInput and tabs out, the value gets auto-completed if there is a unique match. If there is not unique match, then the LOV modal window opens up. In some cases, you may see that typing in a partia
-
Getting error when connecting to url via https
I am connecting to a url via https. Everything seems to work when I open the connnect as follows. conn = (HttpsURLConnection)theURL.openConnection(); //Set the proper connections properties conn.setRequestMethod("POST"); conn.setRequestProperty("Cont
-
Hi Everybody Is there anybody have experience in such case as below. - What should we take care of when we implement the variant configuration to the old system(SAP) which has already run for years. For instance: How about the current stoc