Maintain controlling area settings for PCA in OKE5
Dear Co experts,
i have maintained the controlling area setting for PCA Without maintain Any Dummy Profit Center
Now i have to maintain the Dummy profit center in Controlling setting.
I have tried to maintain the Dummy profit center but it' showing greyed only
Please tell me how can i maintain the Dummy profit center in controlling area settings
I really appreciate for yoyur early responce
Reagrds,
venkataswamy
Hi Venkataswamy,
First you should set your controlling area to your controlling area with the help of TCode OKKS.
Once you have set the controlling area, Goto the TCode KE59 where you can create the dummy profit center master record.
After you create it you can go and see in TCode 0KE5 controlling area settings that your dummy profit center field is filled with the one you created in KE59.
Hope this helps you....
Regards,
Sreekanth....
Similar Messages
-
Maintain Controlling Area Settings: - Transportation
Maintain Controlling Area Settings:
In development server i maintained PCA controlling area settings like "Standard Hierarchy, PCt Local Currency Type '.
after i we transported to testing server these are not transported all other are transported.
can you plz explain on this. and give me solution.
thank youHi,
These parameters are not included automatically in transport; you have to include them manually via 0KEP and 0KEQ transactions.
Regards,
Eli -
CONTROLLING AREA SETTINGS FOR COST CENTER
hi Sap Gurus,
plz help me how to configure CONTROLLING AREA SETTINGS FOR COST CENTER and COST CENTER ACCOUNTING with Transaction codes
If any one to send information abt configuration steps plz send to mail-id [email protected]
I hope my problem will be solved asap
Thanks
VijayI will send you the screen shot of the config settings.
-
Is EC-PCA Controlling Area Settings configured as new GL function/Classic?
Hi guyz,
I need to configured Profit Center Local Currency in order to execute Profit Center Standard Report.
As far as I know, in Classic Profit Center Accounting, I configure it at EC-PCA Maintain Controlling Area Settings at SPRO.
Where can I configure it in the *new GL - PCA*?
Need your help asap...Thanking youit's classic, so it's no need to configure it.
The new PCA report is using Financial Statement:Actual/Actual in the new GL report (sap easy access: new GL-information system-cash flow-general). -
EC-PCA controlling area settings - Store transaction currency
Hi
Reviewing controlling area settings I found that ckeck "store transaction currency " is off ... could I activate (set on) in a productive client that already has postings ??
This could bring any problems? Or It would be better to activate it at beginning of next year?
Reward points to hepful answers
King RegardsHi Andres,
It is possible to turn on "store transaction currency" indicator even after data has been posted. It increases the data volume and is relevant for data coming through other modules (has no effect on data posted within PCA). It is strongly recommended to test it before you implement in the production system and also refer to OSS help for any recommendations.
Turning on has effect on the future transactions only and will not change the past data.
Regards
Sharabh Ivaturi -
Hi Guys,
When i am trying to maintain the controlling area I am getting the following error. I am trying to use the copy function when trying to create the controlling area and it is giving the following message
"You can only copy or replace object area in structure mode"
How can we create the controlling area.
Thanks,
Srikanth.Hi All,
I am also getting the same error, mentioned below.
You can only copy or replace object Controlling area in structure mode
Message no. CZ448
Diagnosis
You can only copy or replace the organizational object Controlling area in structure mode, because multiple object dependencies need to be considered.
System Response
The action cannot be carried out in single mode.
Procedure
Copy or replace the org. object in structure mode. Choose "Structure" and select a suitable enterprise structure from "Templates" or enter your own choice in "Navigation".
I tried to create controlling area many times with same procedure but system always shows same error which i had mentioned above.
Chart of accounts & fiscal year variant are same of both controlling area 0001 & company code 0001. Also company code 0001 is assigned to controlling area 0001.
Still i am getting this error every time when i create controlling area.
Steps which i am following while creating controlling area are - Enterprise Structure - Definition - Controlling - Maintain Controlling Area. In last step i am creating controlling area in activity "Copy, Delete, Check Controlling Area".
Please advice solution for the same.
Earliest reply would be appreciated.
Thanks & Regards,
Prafful Kansal -
RE:Maintain controlling area
Dear Alll,
I have already defined company & co code when I am maintaining the controlling area cocode same as co area,currency type co code currency, currency as INR, chart of accts as INT,whwn I am saving getting error as not data not maintained in co code.Hi,
You need to maintain the Fiscal Year Variant, Field Status Variant and Posting Period Variant in the Company Code data using transaction code OBY6. After completing this you will not get the error while maintaining the Controlling Area.
Thanks,
SP -
Hi,
We haven't assigned dummy profit center in 0KE5.when we have to assign the dummy profit center, that field is grayout. How to assign the dummy profit center in 0KE5.what is the procedure?
Thanks in advanceHi
In the same path assign profit centres how u assign the normal profit center like that u can assign the dummy profit center.
Regards
Shammi -
What are settings for iCloud mail smtp and imap OS 10.7.5?
message is could not connect to this icloud IMAP server. verify you entered the correct info in the account preferences. Says the same thing on SMTP server.
Hello,
Check if Mail is changing imap.mail.me.com to old mail.me.com & smtp.mail.me.com to old smtp.me.com.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0 -
Different fiscal variant for same controlling area
Hi,
as my client requirement is having 3 company codes two having same fiscal year variant another having different fiscal year for legal requirement operating under same same county.
i have maintain all the setting for the 3 company codes but .
but when i enter to maintain controlling area OKKP.
system is throwing following error.
Differing fiscal year variants: V3 - ZP
Message no. KT297
Diagnosis
Fiscal year variant V3, controlling area SQRE, does not agree with fiscal year variant ZP, company code 3000.
The following entries must agree:
u2022 Same number of posting periods (the number of special periods may vary)
u2022 Same period limits
Procedure
Ensure that the fiscal year variants of the controlling area and the assigned company codes agree. If necessary, maintain the fiscal year variants.
Please suggest me how to proceed further in this case.
thanks
kareemHi Kareem
What you are doing is not correct
All comp codes under the Contrr Area must have same FYV and same Ch of accounts
1. Go to IMG and assign same FYV to the 3rd comp code
2. Go to IMG > FI (New) > Global Settings > Ledgers > Define and Activate Non-Leading Ledgers
Here, activate parallel ledger for this 3rd comp code and assign the other FYV in the parallel ledger
Also maintain the Doc No ranges for parallel ledger because your FYV will be different between Main and Parallel ledger
br, Ajay M -
Control indicators for controling area in scheduling agg
dear friends
i get an error while creating scheduling agreement it says the control indicators for controlling area xxxx does not exist. please help me out with this.
cheers
johnHi
Please contact your FICO consultant.
If you are practising your own , Please check the following settings
1. SPRO-> Controlling ->General controlling --> Organization -> Maintain controlling area
Please select Maintain controlling area in the pop up screen, and Select your company code controlling area, and click on Activate Components/Control indicators on left side.Or <b>simple type Tcode :OKKP</b>
Go to new entries and give the financial year 2007 and select Other control indicator as per requirement.
Regards
Ramakrishna -
Update version CO 000 for controlling area
Hi Experts,
I need to update the values for CO versión 000 for a new controlling area created in the system. In order to do that I tried to customize in Project System--> Costs --> Create CO Versions. In the tables I choose version 0 but, when accessing sub-menu Controlling Area Settings, I cannot create settings for my new controlling area.
Can someone help on how can we solve this?
Thanks a lot!
Kind regards,
NeilHi Neil,
What do you mean by inability to create settings for conrolling area? What is exactly the problem/error message. Just set the conrolling area (OKKS) and access the path you mentioned.
Regards,
Eli -
Update CO version 000 for controlling area
Hi Experts,
I need to update the values for CO versión 000 for a new controlling area created in the system. In order to do that I tried to customize in Project System--> Costs --> Create CO Versions. In the tables I choose version 0 but, when accessing sub-menu Controlling Area Settings, I cannot create settings for my new controlling area.
Can someone help on how can we solve this?
Thanks a lot!
Kind regards,
NeilHi Neil,
What do you mean by inability to create settings for conrolling area? What is exactly the problem/error message. Just set the conrolling area (OKKS) and access the path you mentioned.
Regards,
Eli -
Reg. Control indicators for controlling area NCCP do not exist
Dear Experts
I want to create purchase requisition (ME51N) then the following error occured. Pls help me.
Control indicators for controlling area NCCP do not exist
Message no. KI102
Diagnosis
No control indicators exist in fiscal year 2008 for controlling area NCCP.
System Response
No further processing is possible without valid control indicators in the controlling area.
Procedure
Check your entries or define control indicators for controlling area NCCP, fiscal year 2008 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year.
Thanks
Rajakumar.KHi
Goto SPRO-> IMG-> Controlling-> General Controlling-> Organization-> Maintain Controlling area->
Select your controlling area & Click on Activate components/control indicators & Activate the compnnents
Cost Centers
Order Management
ProfitAnalysis
Acty-Based Costing
Select the Check boxes below them & Save the details
This should solve your issue
Thanks & Regards
Kishore -
Need to knw how to maintain cache settings for infoprovider in one go
Hi,
We are trying change the OLAP cache settings for the queries, as we know queries inherit the properties of InfoProvider so instead of changing for queries we need to change it for infoprovider. But we have 1000+ infoproviders, i want to know is there any way to change for all the infoproviders at one go"
we have around 1100+ infoproviders in our BW system
we would like to know what is the option to activate all the queries at
a time
Can you please let us know how to maintain the cache settings for all
the infoproviders in one go
and also like to know whether this will change the cache settings of
the queries present now in the system
Thanks & Regards,
Syeda Nausheen Sulthana
SAP BASIS | AtoSHi Nausheen,
You capture the steps that you do in changing the infocube properties in BDC.
Create an upload file with all the cubes technical names and execute the BDC program in automated way.
You can take help from ABAP expert in your team.
Let me know, if you need more details.
Thanks,
Krishnan
Maybe you are looking for
-
Getting ConverterELTag error while deploying the application though jsf1.2 library is added
Hi ADF Experts, I am using JDeveloper 11.1.1.7.0 and while deploying my application to weblogic server I am getting the below error. [Deployer:149193]Operation 'deploy' on application 'AppsSUI' [Version=0.5-SNAPSHOT]' has failed on 'DefaultServer' [0
-
Major problem with recording videos
hello,i have nokia n95 8gb and i have searched the forum a bit and i didn't find solution the problem i have. When i'm recording video,after 5-7 seconds picture starts to get choppy and it does that like every 1 second for like 0,5 second,i also trie
-
Cisco nexus 6001 not a supported device on cisco prime infrastructure 2.1?
I have installed Cisco Prime Infrastructure 2.2 and Prime Infrastructure still doesn't seem to support the Nexus 6001 platform? Can someone tell me if Cisco Prime Infrastructure will ever support the Cisco Nexus 6001 platform or is there any plans to
-
Multiple instance of custom attributes ACS 5.x
Hello, is there a way to have multiple instances of user custom attributes and insert those as multiple instances of the A/V Pair in the authorisation profile in ACS 5.2/5.3 ? Background: We have to migrate a ACS 4.2 to 5.3. In ACS 4.2 our client use
-
Speaking clock call / BT Web chat
Hello Forum, Can anyone decipher this?: *transcript removed*