Maintain servers

Hello,
I have to maintain 2 platforms (BOE XI 3.1 SP2 FP2.1), there are 3 new fixpacks since the last time I connected :
2.2, 2.3 and 2.4.
Do I have to install each FP or does the FP 2.4 include the previous one (2.2 and 2.3) ?
Is it the same for every BO products (LifeCycleManager, LiveOffice, Xcelsius, etc.) ?
Regards.

fixpacks are cumulative, and usually patch all enterprise products. Sometimes the add-on products do not follow these rules and you would want to check with each to verify they will be patched and don't need any additional extra patches. Live office got patched in XIR2 so should in 3.x as well. I'm not sure about LCM and xcelsius as I don't have them installed.
Regards,
Tim

Similar Messages

  • Simple IP routing in 10.4.8

    I have a stupid question.
    Here are the facts: I'm not a pro in setting and maintaining servers but I have a small server that helps my business. Until a few days ago everything was fine, the server was working (mail, web, dns, ftp and so on). My Internet provider decided to change my ip. The old ip was something like 86.55.111.82 with router 86.55.111.1 and subnet mask 255.255.255.0. The new IP that the provider gave me is: xxx.xxx.206.9, router xxx.xxx.152.2 and subnet 255.255.254.0. After changing the ip, the server is working OK (after a little work to make all the settings again) except the gateway between my intranet and the internet. I've checked everything (NAT, Firewall, routing tables) but it is not working. The computers from intranet don't see anything from outside (ping from inside stops at 206.9, the router address is not responding)
    Now the question: Is it possible that the strange ip address - router address do this routing problem (internet works fine on server)
    Thank you in advance for any clue
    PM G5   Mac OS X (10.4.8)  

    To review your specs, to make sure we understand:
    your os x server is running 10.4.8, and it is connected directly to your isp's internet (no other routers or firewalls in between), and you are running mail, web, dns, ftp, and so on; you also must be running NAT and maybe DHCP, to create your intranet, and the firewall service to protect itself and the internet...
    Even though your new router address seems strange (ending with a .2 instead of a .1), I don't think it is the source of your problem, because your server does get the internet, which means port 80 is open between server and isp...
    This leaves the possibility that port 80 is closed between intranet and internet, in which case you need to use the firewall tool in ServerAdmin to create rules that allow the services you want on the interface to your intranet...
    If you are using DHCP, maybe the clients on your intranet are not receiving ips (check the client ip, and make sure it doesn't start with 169)
    Did your isp have any dns records for your old ip that they didn't update for your new ip? Usually, your domain name should resolve to its ip address and vice-versa, the ip-address should resolve to your domain name: since, during startup, your os x 10.4 server queries its dns server to see if its name matches its ip, it won't get a match if it relies on itself for dns services, because it is still starting up and dns isn't running yet; therefore, either dns has to be running on different machine in your intranet, or your isp has to make some records in their dns, so that your server can check its name during startup; maybe your isp changed your ip address, but didn't update their zone info for your domain to reflect the new address. If you open up terminal, and type "host" followed by your domain name, and then "enter", it should return your ###.###.206.9, and likewise, when you type "host ###.###.206.9" it should return your domain name... if not, then you should ask your isp to add a ptr record for your domain name.
    There are lots of possibilies, so will wait for more info before proceeding.
    Dual G4 colocated xserves   Mac OS X (10.4.7)  

  • Partner Function Disappears on Save

    Hi,
    I have a custom relationship linked to a custom partner function.
    Whne I create a Partner function, this relationships is created.
    There are no time constraints on this relationship and a Sold-to Party can only have one of these relationships.
    I have changed to config to give this relationship a time constraint of no gaps, no overlapping and th Sold-to Party can still only have one relationship of this type.
    However, when I now go into Sales Area Data and create a new partner function, the relationship is then created in BUT050 when I save but the partner function entry I just made disappears.
    Has anyone come across this problem before and know what is causing this?
    Thank you
    David

    It is possible to have several GS or PI partner in the vendor master.
    it is possible to maintain serveral GS and PI partners in a contract.
    Note 459350 - FAQ: Partner determination in purchasing:
    In the vendor master, several entries are maintained for one partner function. If none of these entries is flagged as 'default', none of these partners is copied to the document during the purchase order generation via transaction ME59.
    However, if you create a purchase order using Transaction ME21 or ME21N, a dialog box for the selection of a partner is generated.

  • Server name changed but old server name reflecting

    Hi Experts,
    Issue is In the SQL server name is changed.
    When the user is logging on SAP old server name is appearing and in SAP 8.8 there is no option of change like in SAP 2005B and 2007B  so no database is appearing on screen.
    What should be done in such condition.
    Thanks & Regards -
    Mona.

    In 8.8 you need to add and maintain servers through the license manager of the server tools. Open license manager settings and click the button on the bottom left (Configure Security). Enter your B1 site users details and then in the next screen you can define an additional server as well as remove the old one; I had the exact same issue a few days ago!

  • Muse CC and Form Catchpha

    Hi all,
    Apologies for the rant in advance, but can anyone at Adobe tell me what the point is in allowing forms to be used outside of Business Catalyst only to keep the use of Form Catchpas for BC customers only??? This restriction really means this feature is yet again useless. None of my clients wish to host with BC as they have hosting elsewhere and want to keep it that way. I really feel this is an underhand way to encourage use of the Adobe BC service. I pay my recurring fees to Adobe for thier software so why restrict it with such stupid limitations.
    Any thoughts are appreciated.
    Many thanks,
    Tom

    Please try it on a site before declaring it useless.
    While captcha support is not available, if SQLite is available Muse will limit the form submissions that can be submitted from a single IP address in a short period of time, thus substantially reducing the likelihood and scale of spam form submissions. The FAQ here <http://forums.adobe.com/docs/DOC-3581> provides more information about the new forms functionality, including how to easily check whether your hosting currently has SQLite available.
    Yes, there is no captcha support. Captcha support requires some degree of image processing on the server (to generate the captcha image). This level of image processing is not available as part of the typical PHP installed with default hosting configurations.
    We're frankly walking a tightrope. We're doing our best to provide a forms solution that works on the vast majority of hosting providers, avoids (or at least limits) spam submissions, requires no server-side configuration by the user (in most cases), minimizes the code installed on your server (to minimize the security risks and maintenance requirements inherent in running any code on a server) and avoids any per form or per form submission costs to Adobe (which would in turn require us to, in some way, have an additional charge for the use of forms in order to cover that cost).
    If the cost problem isn't clear, let me explain further. An individual Muse user may produce and maintain 1 website or hundreds of websites. These websites can continue to be live online long after the Muse subscription has expired. (The websites remain online as long at the hosting provider is paid.) In the future if we provide a forms solution that requires Adobe to maintain servers to manage accounts, process form submissions, send e-mails and provide customer support for that service, the costs associated with that would be incurred per website, per form and/or per form submission and therefore would require us to charge separately from the subscription cost of Muse.
    Yes we're part of "a big company" and yes we're interested in making a profit, but ultimately we're just a group of people that take a great deal of pride and satisfaction in creating tools and solutions that enable you to be more productive and possibly achieve things you otherwise would be unable to do. And, if we've done our job well, we'll all have fun along the way.

  • Ubiquiti Video Surveillance in the Cloud

    I didn't have a question on bandwidth of the cameras, I know what that is at each site.  I was just wandering what other people who have used Ubiquiti Video Surveillance systems thought of this possibility. My concerns with the bandwidth is that most of my clients are in rural areas where internet connection is not as reliable as they are in populated areas.  Their bandwidth can really fluctuate.  That being said, the idea of not having to maintain servers across a large rural area is very very attractive me, also not having to support servers in non-ideal conditions most agribusiness locations are dusty and hot. 

    If you go to http://video.ubnt.com you get the image below.  Rumor in the forums is that they are releasing a Video Surveillance Server that can run in the cloud.  I have installed a lot of these surveillance systems from Ubiquiti and if they make it like their Unifi Controller for the network (APs, Unifi Switches, and Unifi Secure Gateway) then that would be awesome.  I am just concerned about the amount of bandwidth that would be needed for each camera going out to the cloud server.  
    This topic first appeared in the Spiceworks Community

  • Partner function disappears..

    Hi Seniors,
         On contract creation, for a specific vendor, the "GS" partners existing on the vendor master record not appear on the contract document.
      Client has maintained 1 VN role, 2 PI role and 2 GS role. Can we maintain several GS or PI for a single vendor ?? then which one the contract will prefer?? client hasnt checked default parameter also.
       Client is expecting that whatever partner roles are maintained in vendor master record, it should appear in contract also. but in contract it is showing 1 VN role and 1 PI role and 1 GS role. it is not showing another PI and GS. why it is so????
    regards,
    Jana

    It is possible to have several GS or PI partner in the vendor master.
    it is possible to maintain serveral GS and PI partners in a contract.
    Note 459350 - FAQ: Partner determination in purchasing:
    In the vendor master, several entries are maintained for one partner function. If none of these entries is flagged as 'default', none of these partners is copied to the document during the purchase order generation via transaction ME59.
    However, if you create a purchase order using Transaction ME21 or ME21N, a dialog box for the selection of a partner is generated.

  • Maintaining session in distributed servers

    Hi,
    I wanted to know how to maintain the session in the case when the servers are in a distributed environment, i mean the http request is sent to one server which inturn checks if any of the servers is free and redirects the request to it. When there are many users accessing the site simultaneously, then maintaining serverside session becomes a problem.
    Any help is appreciated.
    Chrs
    Anidhar

    Hi,
    Thanks for your response, but the session that i wanna maintain will clash with the data that i will be submitting with the form, meaning i am using get method to transfer data to the server.
    Pls suggest.
    Chrs
    Giridhar

  • Maintaining 2 servers for production

    Hi Experts,
    Is it possible to maintain 2 servers for Production, so that if there's some outage then the other server will be active??
    How to map both the servers?
    Please suggest.
    Regards,
    Sushama

    Hi,
         Are you looking for load balance or some cluster thing...or
    want to expose the servers  to outside network...DMZ...in this case yes ...
    if you are looking for load balance... then two nodes can be created in the same server...but needed more memory in the server...
    if you want to expose to the outside netwrok people for exchaning data..then need to maintain one in DMZ..and other in with in network..which does the application processing..
    HTH
    Rajesh

  • Servers-maintain

    Experts:_
      good morning, In Implementation partner Onece project completed, (after going live and support) what type of servers  maintained means( development server and testing server or any other) and IN the same way In client position What servers are there where we maintained.My request BOth of them mainatined 3 servers(DEV, QAS, and PRO).or  not if are not maintained what they can maintianed servers( this is my interview question Bstl).

    Hi,
    the same 3 tier structure u can maintain..
    other wise most of the customer ( if not big size) they go for 2 tier architecture where they install a new server ( say SUP for support) and they copy the PRd server to SUP and by which consultanst can get the scope of getting the real time data as well as they can make/ change configuration if required
    if helpful assign points..
    cheers
    PK

  • There are no message servers maintained in the associated SLD Error/Problem

    Hi Experts,
    I developed a Web Dynpro in my Composition Environment 7.1 RS5 and I am facing some problems. I maintained SLD Data Supplier and SLD Used By Applications and they are OK. I did three different destinations SLD_Client and SLD_DataSupplier as HTTP (CE) and one more as RFC Destination type (Destination ABAP). All of them ping u201CSuccessfully connected to HTTP destination SLD_Client with response code 200. Content type text/htmlu201D. In my SLD Data Supplier Configuration the  collect and send data are completed duccessfully. In Jco RFC Provider I did one RFC Destination which I called CE1_PORTAL_EPD and is pointed to R3 and is running OK. Finally when I want to maintain my Jco Web Dynpro (WD_RFC_FLIGHTDATA_META) the next message appears:
    There are no message servers maintained in the associated SLD. Please contact your system administrator.
    I changed my services file which is in C:\windows\system 32\drivers\etc\ services  and add my port as:
    sapmsXYZ 3600/tcp # SAP system message port  System ID XYZ production, but the message is still appearing . What else is missing???
    + It is against Rules of Engagement to ask for points and solicit responses using points. +
    Thank you very much
    David Cortes
    Edited by: Bhavesh Kantilal on Dec 3, 2008 11:42 AM

    Thank you very much Suresh Pagadala, your answer has been very helpful.... I solved the problem, I had not patched the SLD Component.... in order to patch the CE must download the SLD component from....
    https://service.sap.com/~form/handler?_APP=00200682500000001943&_EVENT=LIST&HEADER=&FUNCTIONBAR=&EVENT=LIST&ONR=01200314690200006722&NTYPE=T_CV_DELO&V=MAINT&TA=ACTUAL&U=S0004970077&AI=SWTYPSC|&AI=PECCLSC|OS&AI=PECU_OS|OSINDEP&AI=DELO|10005117&AI=PVNR|01200615320900001553
    Regards

  • Best practice for maintaining URLs between Dev, Test, Production servers

    We sometimes send order confirmations which include links to other services in requestcenter.
    For example, we might use the link <href="http://#Site.URL#/myservices/navigate.do?query=orderform&sid=54>Also see these services</a>
    However, the service ID (sid=54) changes between our dev, test, and production environments.  Thus we need to manually go through notifications when we deploy between servers.
    Any best practices out there?

    Your best practice in this instance depends a bit on how much work you want to put into it at the front end and how tied to the idea of a direct link to a service you are.
    If your team uses a decent build sheet and migration checklist then updating the various URL’s can just be part of the process. This is cumbersome but it’s the least “technical” solution if you want to continue using direct links.
    A more technical solution would be to replace your direct links with links to a “broker page”. It’s relatively simple to create an asp page that can accept the name of the service as a parameter and then execute an SQL query against the DB to return the ServiceID, construct the appropriate link and pass the user through.
    A less precise, but typically viable, option would be to use links that take advantage of the built in search query functionality. Your link might display more results than just one service but you can typically tailor your search query to narrow it down. For example:
    If you have a service called Order New Laptop or Desktop and you want to provide a link that will get the user to that service you could use: http://#Site.URL#/RequestCenter/myservices/navigate.do?query=searchresult&&searchPattern=Order%20New%20Desktop%20or%20Laptop
    The above would open the site and present the same results as if the user searched for “Order New Desktop or Laptop” manually. It’s not as exact as providing a direct link but it’s quick to implement, requires no special technical expertise and would be “environment agnostic”.

  • Maintaining client session in request for pages from different servers

    Dear sirs,
    I have a JSP page which is running on a server in a client session. In the JSP, i have a link which is pointing to the JSP of another application running on a different server. How can we maintain the communication in the same client session?
    Regards,
    Sudheesh K S

    Using cookies is one way.

  • How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver?

    How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver? Please and thank you!

    example.com is a generic http:// address to illustrate the difference between what you gave, file:/// and an actual URL address.  There are no tutorials on that site.  Sorry for the confusion.
    #1 Have you procured your domain name and web hosting yet?  You'll need to do that to publish your pages online.
    #2 When you sign-up for web hosting, the company will send you FTP log-in credentials to your site's web server.    You will enter this info into your DW Site Definition.  Site > New Site >  See screenshots below:
    Under Servers:  Root Directory is whatever your hosting company tells you to use.  This varies by web host.  Some commonly used ones are public_html, www or htdocs.
    After your site definition is set-up, hit the TEST button to confirm it's working.  If it's not connecting, go to More Options.
    Go to the Files Panel (F8).  Use the UP Arrow  to PUT files to remote server.
    Use the DOWN Arrow to GET files from server to your local site folder.
    Post back when you have finished uploading your work to the remote server.
    Nancy O

  • Lync 2013 updating databases after updating Front End servers

    We have a front-end server pool consisting of 3 Lync 2013 servers and a back end of 2 SQL servers using SQL mirroring.  All servers are Windows 2008 R2.
    Following the instructions in
    http://support2.microsoft.com/kb/2809243 , I verified that the servers were all ready for updates, then I ran the
    Stop-CsWindowsService -Graceful cmdlet to stop the Lync services on the first FE server, then I ran LyncServerUpdateInstaller.exe to install the updates.  After the updates were installed, I restarted the server, waited for Lync services
    to all start, then repeated the process on the next 2 servers in turn.  This was all successful.
    I am now looking at step 2 in this document, applying the back-end database updates, and I have a problem and some questions.  The problem is that all the databases had the principal copy on the mirrored SQL server.  I ran the recommended Invoke-CsDatabaseFailover
    -NewPrincipal Primary cmdlet repeatedly, using all the database types I could find, but I still have two databases (database names
    xds and lis) on the mirrored server.  Since the cmdlet requires a database type, what type of databases are the xds and the lis databases?
    Once I get that done, I an still unsure of exactly what to run to update the databases.  The KB article states to run Install-CsDatabase -ConfiguredDatabases -SqlServerFqdn FEBE.FQDN -Verbose .  Do I type this in exactly
    as stated, or is FEBE.FQDN a variable for our SQL server or some other entity in our environment?  If I do use the actual SQL Server name in that, do I run it twice, using the name of the mirrored SQL server the second time?  
    Thank you very much for your help.

    Hi Logan Burt,
    Central Management store database files
    Data file or log purpose
                    Xds.ldf
    Transaction log file for the Central Management store
                    Xds.mdf
    Maintains the configuration of the current Lync Server 2013 topology, as defined and published by Topology Builder
                    Lis.mdf
    Location Information service data file
                    Lis.ldf
    Transaction log for the Location Information service data file
    And you could verify if Lync Server 2013 database updates have completed successfully.
    How to Verify if Lync Server 2013 Database Updates Completed Successfully
    http://blogs.technet.com/b/dodeitte/archive/2013/07/02/how-to-verify-if-lync-server-2013-database-updates-completed-successfully.aspx
    Best regards,
    Eric

Maybe you are looking for