Maintain Subject (LISTCODE) on PCUI

Hi,
In service order maintenance, SAPGUI fast entry screen (transaction crmd_order) has a field called SUBJECT (technical field name LISTCODE) to maintain subject category code.
I need to provide users a way to maintain the same in PCUI application CRMD_BUS2000116.
In view CRMV_REGTABGRC, for tab page group SRV_ODC1, I enabled event S1O_HD_TREE_ANALYSIS, which now shows a new tab "technical analysis" on PCUI. On this tab I can view the subject, if it is maintained in SAPGUI. I can even delete an entry if it was earlier maintained in SAPGUI. But I'm not able to maintain a subject here.
Any idea what do I need to do?
Regards,
Kaushal

Hi
Please, see these notes
Note 49174 - NAST: VF01 Replacement of symbols does not work
Note 537832 - Incorrect replacement of text symbols for MAIL
Note 718017 - Replacement of text symbols in spool title/MAIL
So, do a subrutine in RV60AFZZ, for instance ZZ_TEXT_SYMBOL_REPLACE. Populate in V/40 for your message program SAPLV60A and the last subrutine in the fields for replace of text symbols. After, do the settings in V/40 to see this text symbol.
I hope this helps you
Regards
Eduardo
PD: other idea. Rule the number of PO for splitting the invoice, and store this number in any field. If you don't have any field for this purpose, enhance VBRK with an append and populate it in the copy rules with a VOFM subroutine.
Edited by: E_Hinojosa on Jan 25, 2012 5:54 PM

Similar Messages

Create & maintain BP Hierachy in PCUI

Hi experts
This is regarding how to create BP hierarchy in PCUI.
I am able to find methods such as BPH_create and BPH_Maintain but there is no application which is available in PCUI where i can find these methods.
please help me regarding this.
regards

Hi,
Please use ISUM_BPH to work on BP Hierarchy.
However, the PCUI application ISUM_BPH is only a read-only application. The
maintenance of Business Partner hierarchy can only be done in
SAPGUI in Transaction BPH. So you can use the application ISUM_BPH,if
it meets your requirement.
Hope this helps.
Regards,
Hemanth

Setting Mail Subject and Body

Hi,
I have configured sending a mail with PDF attachment for Invoices in NACE. the program is RLB_INVOICE The mail goes fine with the PDF attachment to external mail address.
Now I need put subject and Body for the email.
There are 2 issues now.
1. In transaction NACE i am using "Mail title and texts" node when i fill the Document title, the same document title appears for the e-mail subject as well as the name of the attachment. But i need different names for the subject and attachment and the invoice number must be present in the subject.
2. Under the "Text" tab when i maintain some texts, this doesn't appear anywhere in the mail.
How do i maintain Subject and Body for the e-mail.
Regards
Rajvansh

Hi
Keep break point at SO_OBJECT_SEND.
In the first screen
VF01 / VF02 ->
Set the Output type not to process immediately, use custom own transaction.
Save and come out of transaction.
And again
VF01/ VF02 ->
Issue Output type select the Output with medium 5.
and click on the OK button.
It should stop.
To pass value from driver program to Enhancement point.
I used FIELD SYMBOLS.
Since i am offline, i do not have exact syntax.
It will be something like this
FIELD SYMBOLS : <OUTPUTTYPE> type any.
ASSIGN '( PROGRAMNAME(FIELD NAME)) TO <OUTPUTTYPE>
IF <OUTPUTTYPE> IS ASSIGNED.
ENDIF.
Or
If it is custom driver program, you can use memory ID's also
Regards
MD

MAIL_RECIPIENT ,MAIL_SENDER option

Hi All,
can you plz let me know why sap has provided the following option in FM CALL FUNCTION 'OPEN_FORM'.
A.MAIL_RECIPIENT
B.MAIL_SENDER
C In DEVICE Parameter the value is TELEFAX
Does it mean that we can send the Email and Fax by providing these detail.
if no what is the use of these parameters.
if yes where we will define subject field in parameter for Email and Fax Number.
Tahnks in Advance.

Hi Mahesh,
We can use these parameters if we wants to send the output by email / fax, you can refer include RVADOPFO which shows all the required coding for sending output by email/ fax.
if you wants to define subject field for email, then you can define that in tcode NACE
for example.
Once you execute tcode NACE > select V3 - Billing > Click on Output types > select required output type from list > select folder Mail Title and Text on top left corner. there you can maintain subject text.
hope this helps, let me know if you require any further details.
Thanks,
Santosh

Outer Join Syntax in sql2k to Oracle Migration

All of my existing SQL Server 2000 code is using the (INNER, LEFT OUTER, RIGHT OUTER) JOIN syntax which according to Oracle SQL Reference (A90125-01) is supported. The migration workbench seems to want to convert this to the old style syntax of putting (+) in the where clause conditions. I am therefore getting lots of warnings telling me that "complex outer joins are not reliably supported". Is there a setting somewhere that will tell the migration workbench to maintain (subject to required conversion) the original syntax format.

Hi Doug,
The issue you report has been tackled in a recent internal build released by the OMWB team. OMWB version 9.2.0.1.6 which is freely downloadable on the http:\\mtg.ie.oracle.com site. As I've mentioned, this is an internal release and is therefore not supported - although it is very stable and has already been used by several internal customers. We expect to have a fully supported release of OMWB available on OTN in December.
In version 9.2.0.1.6, there is an option in the "Parse Options" tab on the Stored Procedures property sheet called "Generate Oracle 8i Outer Joins" - this setting is switched off by default in this build and would therefore preserve your ANSI compliant joins by default. Switching the setting on causes the OMWB parser to generate the joins in the old (+) Oracle syntax standard.
I hope this helps,
Tom.

Since upgrade from Exchange 2007 to Exchange 2013 the conversations in Outlook do not group by subject

Hi Microsoft,
Since we have upgraded from Exchange 2007 to 2013 users complain their conversations in Outlook are no longer grouped based on the subject of an e-mail. I looks like Outlook uses other message properties for grouping e-mails in a conversation.
I have investigated all the forum topics and see that with exchange 2010 there is support added for the use of conversation-ID's. However the functionality to automatically group e-mails with the same subject in one conversation in Outlook is gone!
I would like to know if there is a fix to implement so that some our users get this functionality back. For Example: Let the exchange server not generate conversation-ID's and message-ID's for certain users.
Your help is greatly appreciated!

Totally correct!
If you don't plan to maintain Outlook then you plan to fail :(
Additional links etc are in here:
http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Service Desk Mail - Modify the subject -adding ticket number and descriptio

Hello,
I have activated the automatic sending of email when a new ticket arrives into the Service Desk. I am using the standard notifcation smartform However all the mails arrive in the inbox with the same subject, so no possibility of making a quick identification of the ticket.
I heard that is possible to add additional fields in the subject of the mail using some "&" parameters. However I do not have a clue where to modify and what type of & parameters are available. Is that I need to copy and modify the smart form somewhere??
I appreciate your inputs.
Regards
Esteban Hartzstein

Hi Esteban,
The subject line corresponds to the name of the smart form that you can maintain in the "description" field in the sap form builder. you can add dinamyc parameters to the subject by using the placeholder "&". e.g.: & | Action Required.
On se24, copy the class CL_DOC_PROCESSING_CRM_ORDER into the customer workspace (ZCL_DOC_PROCESSING_CRM_ORDER). then edit it and navigate to line 185 and change the following:
REPLACE '&' WITH ls_orderadm_h-object_id INTO ls_output_options- tdtitle.
Other example to use as subject:
Object ID + Priority + Description
Field description value: &1 | &2 | &3
On the class:
REPLACE '&1' WITH ls_orderadm_h-object_id INTO ls_output_options- tdtitle.
REPLACE '&2' WITH ls_activity_h-priority INTO ls_output_options- tdtitle.
REPLACE '&3' WITH ls_orderadm_h-description INTO ls_output_options- tdtitle.
More information on this on the book: SAP Solution Manager Service Desk - Functionality and Implementation
Hope I can help.
Regards,
Ricardo

How do I get rid of the subject reminder prompt on Thunderbird?

Every time I send an email that doesn't have a subject, the prompt pops up asking me if I want to send the message without the subject. Can I get rid of this prompt?
Thanks

When choosing add on always look at the fine print under the name to see what versions they are compatible with. Some are no longer maintained and only work with older versions.

Problem in creating follow-up in PCUI

HI all,
need some help,
While creating the follow-up transactions in PCUI, the fields are getting greyed out.
Eg., Activity to Opportunity
Opportunity to Quotation or
Quotation to Order etc.
The followup scenarios are working fine in GUI.
Regards,
Karunakar.

Hi Karunakar,
You need to maintain blueprint table entries for the Back End CRM roles that you have created. Goto Transaction CRMC_BLUEPRINT_C navigate to Navigation(URL generation) "Assign object Method to Role" .
Add a new entry for your custom role if you have assigned the custom role in portal to the Enterprise Profile and under object type select OpportunityCRM , Method type is "Application" and Implementation Type : S - BSP as external Service and in ID Page/Service give the PCD location of the Portal Role that you are using.
Repeat the same procedure for the other followup scenarios by selecting the corresponding Object type for Quotation and Order.
Regards,
Swami
Reward points if it helps.

Dynamic Subject Line not appearing in PO mail

Hi Experts,
In tcode ME28 when i get the list of POs to be released , I click on the release possible icon against the PO number. On clicking of this, a mail goes to the vendor of the PO.
My requirement is to change the subject line of this mail.
I have done all the required settings in NACE i.e. for this output, in the " Mail title & texts" , I have maintained the text and in the General data tab I have mentioned SAPMM06E as the program & TEXT_SYMBOL_REPLACE as the form routine.
Also in the Mail tab I have done the same : SAPMM06E as the program & TEXT_SYMBOL_REPLACE as the form routine.
But i am not able to get this dynamic mail text in the PO mail , instead of this text, the correspodnig PO number comes as the mail text.
In there anything that I have missed out ?
Please suggest.
Thanks in advance .

Hey ,
is there a code written which will is responsible for forming and sending this mail ? If so the you need to look inside this code and instead see where are you setting PO number in subject line. In that part of code you need to a variable which will hold this dynamic text which you want to send as subject line.
If you can share that code with me , I can help you further.
Hope this is helpful.
Regards,
Uma Dave

Using SSDT-BI in Visual Studio 2012 to create and maintain SSRS, SSAS, SSIS in SQL Server 2008 R2

Hi, My management is wanting all the developers (database and .net) to upgrade from Visual Studio 2008 to Visual Studio 2012. We are currently using SQL Server 2008 R2 for our data warehouse and using Business Intelligence (SSIS,
SSAS, and SSRS) to maintain it. Our database team is also wanting to create database projects and include that in our Team Foundation Server 2010 code repository along with our BI code. From what I've been able to research googling the
internet is there are two products available SSDT and SSDT-BI which can be installed into VS2012, but it appears that only SSDT for database projects is the only thing that will work until we someday upgrade to SQL Server 2012. Most of the information
I've found on the internet regarding this subject is over a year old and a lot can change in a year. So my questions are can we install VS2012 and both SSDT and SSDT-BI to create and maintain the SSIS, SSRS, and SSAS currently in our SQL Server 2008
R2 database? If we can install these three items, VS2012 and the two SSDTs, and are able to create new BI and maintain our current BI in our SS2008R2 database then what issues might we have with our TFS2010 code repository? We prefer
to use only VS2012 or VS2008 but not both at the same time. If we can't do everything we are currently doing in VS2008 with our SS2008R2 database by switching to VS2012 and the two SSDTs then we will stay with VS2008 until we someday upgrade
to SS2012. Please advise and thank you. James M.

I'm going to move this to the SSAS blog, where most SSDT-BI questions are answered (this forum mainly answers SSDT questions). Someone there may be able to give you better information but here's what I know:
- I think you'll only need to install SSDT-BI since you're using SSIS, SSAS and SSRS. SSDT is the database tooling which it sounds like you wouldn't use, and it's actually built into VS2012 in any case.
- SSIS projects don't work with earlier versions of SQL Server, but SSAS and SSRS do. Details are on
this blog post. I don't have enough knowledge to suggest workarounds or best practices for handling the SSIS issue. Perhaps you could keep 2 projects, or 2 branches of the same project (one for 2012, one for 2008) if that's possible? I think your BIDS projects
will be upgraded to SSDT-BI compatible projects so it's work checking them into source control, upgrading, then comparing to understand what's changed. You might be able to keep the same overall source and just change a few settings in the different branches?
Hopefully someone on the SSAS forum can help give you more information and suggestions.
Kevin

Hit "Maintain the exchange rate type for version 0 in 2011" error

Hi,
I hit error as mentioned in subject above while creating a sales order. I went to tranx <okeq> try to maintain new entry for year 2011. The problem I'm facing is I don't know what is my controlling area. Please advise how to find out my controlling area based on my plant or MM. Thanks!
Regards,
Jane

Jane,
You can find the company code assigned to the plant in OX18
Controlling area is usually the same as company code. You can check this, and find the exact controlling area, in OX19.
This question should probably be posted in a CO forum rather than an APO forum.
Best Regards,
DB49

To make changes in the subject of Email for PO Creation...

Hi ,
We have done configuration in NACE for simple mail to be sent when a PO is created . i want to change the subject of Email for PO Creation...
Please help me in this regards
Regards
R/Ragu
Useful answers will be rewarded

Hi,
In NACE, select your output type and double click on the option for Mail title and Texts in the navigation area on the left side of the screen. Here you can maintain the Subject for your E-mail.
Cheers!

"F4" search-help for custom field in PCUI

Hello all,
Does anyone know how I can create my own simple F4-help for a custom field I have added to a custom Tab Page in the PCUI? It should show a selection from a custom table.
I couldn't find an useable example in the PCUI-cookbook.
Any ideas anyone?
Kind regards,
Martijn de Jong.

Hi Manuel,
I saw that paragraph but didn't know how to implement it. Maybe you or someone else can explain/translate in steps what I have to do, according to the text underneath, i want to use a combobox:
"If you want the application to specify the values for selection (within popup or dropdown list box or
combobox (COBX respectively TIME)) at runtime instead of using predefined domain values, data
must be provided by the application via the method FILL_DROPDOWN_LISTBOX. That scenario
works if the field type is "Input Field" and the F4 application is set to "VALUE_TABLE". With these
customizing settings, the method FILL_DROPDOWN_LISTBOX of the interaction layer is called at
runtime and the actual field values will be passed to the application via importing parameter
IT_SCREEN_STRUCTURE. Thus the application can provide context-sensitive help values within a
popup or a dropdown list box respectively combobox (COBX respectively TIME). Within the popup
more than one column of values can be displayed."
How/where do I (re)define method FILL_DROPDOWN_LISTBOX? Do i have to maintain an own class? and how do i ensure that more columns are shown?
Kind regards,
Martijn de Jong.

Security using custom field in PCUI

We would like to create a custom field on the header of the business partner to store information that would then be used in the security roles.
For example, we want to create a branch field on the header of the business partner and then use this field to restrict access to specific accounts within the sytem using a CRM Security role.
Does anyone know if you can use a custom field in the CRM system to restrict security within the PCUI application?
If anyone has any information, I would greatly appreciate it as we are on a crunch to get this implemented!
Thanks!

Hi Darcie,
If you add custom field and maintain value in it, i'm not sure if you can restrict access by CRM Security role.
If your users are going to be entirely based only on portal/pcui (i.e. they would not use SAP-GUI log-in) then you can consider the option of tweaking your Accounts advanced search and not letting users see certain accounts (based on the value in EEWB / custom field)
Hope this helps.
Regards,
Raviraj

Maintain Subject (LISTCODE) on PCUI

Similar Messages

Maybe you are looking for