Maintaining Multiple Vendor Phone Fax and Email using IDOC

Hello Guru's,
I have a requirement where I must be able to maintain multiple phone and fax entries for all of our vendors. Is there a standard segment in IDOC CREMAS05 that will allow for this maintenance? Or will I have to use a separate BAPI / FM? I think there must be a standard way for doing this.
As of now it appears the CREMAS05 IDOC only supports the ability to maintain one phone/fax or email address at a time, which is in the LFA1 table, and not at the address table level (ADR2, ADRC, ADRT, etc.).
This is for an R/3 System running on EHP5.
Thanks,
Kohl Kemp
Edited by: Kohl Kemp on Jul 14, 2011 3:16 PM

I've never done this natively in CUC. Here's a guide that covers how to do it with the Fax server integration if that helps:
http://docwiki.cisco.com/wiki/Configuring_Fax_Detection_%28Single-Number_Voice_and_Fax%29_with_Cisco_Unity_Connection

Similar Messages

How do you combine iMessage sent to phone number and email?

I talk to someone who sends me imessages to my phone number from their phone, and also from their ipad to my email. Both phone number and email are under the same contact. But the mesages go into 2 different threads. Id like to combine them since being under the same contact they show up exactly the same in the messages list.. so i cant tell if im messaging the ipad or the phone..
ideally id like to write a message to that contact and it would go to both their ipad and iphone...
anyways.. how do I combine them?

This is possible and you can also send and receive iMessages to your MacBook from one phone number without having to use any email address whatsoever. This also means you will have one chat thread with all of your messages not two.
Anyone will tell you that I am a hardcore Apple Fan, however, sometimes they lack in the instructions area. For a while now I have had a problem with iMessages being sent from my MacBook. I could send an iMessage from my phone with no problem and my friend would receive it from my phone number however, the problem would arise when I would send a iMessage from my MacBook to to the same friend and a new thread would be created, so in essence she would have two different messages for me, one from my phone number and one from my email. After numerous attempts of contacting Apple Customer Service with no avail, I eventually figured it out on my own. I did aggrate some friends because I had to send messages relentlessly. In the end I found a solution and here are the instructions.
You’re going to go into iMessage on your computer, go to messages in the top left, click on preferences and then click on accounts. Look under “you can be reached for messages at” you should see your email and or your phone number.
If you do not see your phone number you need to add it to your account at this site. “https://appleid.apple.com/” click on manage your Apple ID and then sign in. After you sign in you will go to another screen and on your left you’ll see a list of choices click on phone numbers. Add your phone number and click save changes. It usually takes a few seconds for your iMessage account to update. Completely quit iMessage in the toolbar and then reopen it and go back into messaging preferences and then accounts.
After that has been done your phone number should now be added to the “you can be reached for messages at” section. Click on your phone number and then uncheck your email address.
Then go into your iPhone settings, messages, then scroll down to send and receive. Uncheck any email, only your phone number should have a checkmark, if your phone number does not have a checkmark... check it. You should receive a pop-up on your iPhone saying so-and-so’s MacBook is now using “insert phone number here” for iMessages.

Regd the contact person fax and email address

Hi,
I am trying to get the contact persons fax and email address.The telephone # is available in KNVK table.but I don't see fax and email.Let me know how to get the details.
also I see PRSNR in KNVK..What is the purpose of peson number?
thanks
Suganya

Take a look at the code below, Extract from KNVK and use the prsnr number to extract tel number and email address.
* Use function & dept to extract KNVK data and person number
SELECT parnr kunnr namev name1 abtnr anred pafkt parh1 parh2 parh3 parh4 parh5 pakn2 pakn3 pakn4 pakn5 prsnr
FROM knvk
INTO TABLE i_knvk
WHERE kunnr = wa_vbak-kunnr.
* Use person number to extract the fax no.
IF i_knvk[] IS NOT INITIAL.
SELECT persnumber fax_number
FROM adcp
INTO TABLE i_adcp
FOR ALL ENTRIES IN i_knvk
WHERE persnumber = i_knvk-prsnr.
ENDIF.
IF i_knvk[] IS NOT INITIAL.
SELECT persnumber smtp_addr
FROM adr6
INTO TABLE i_adr6
FOR ALL ENTRIES IN i_knvk
WHERE persnumber = i_knvk-prsnr.
ENDIF.

Questions on agent state of phone ready and email ready

An agent can put themselves in both phone ready and email ready state...does that mean they will get both a phone call and an email at the same time?
Or does it mean that if they get an email, they go to not ready state for both phone and email?
If an agent is both phone ready and email ready state, which takes priority? Is there a way to ensure (configure) incoming phone calls take priority over incoming emails?
Also under configuring agent e-mail, Maximum number of e-mails on agent desktop = the maximum number of e-mails an agent can have on the desktop at any one time - what does that really mean?
We are running UCCX v7.0(1)

The terminology used is that email is an "interruptible" channel and voice and web chat are not. So if you are on a voice call, you cannot get interrupted - by any call, be it another voice call, a web chat, an email. You are ready on all three channels, but cannot be interrupted.
As for the email channel, you can get interrupted by a voice call or a web chat at any time, if you are ready.
(Aside: In UCCE you can change this behaviour and make email a non-interruptible channel, if you so desire - I don't have any customers that have wanted it that way.)
The number of concurrent tasks you can handle on a channel is configurable. By default, voice is 1. I don't think that can be changed - and rightly so.
But web chat and email can allow a number of concurrent tasks. In email, these are sitting in your "current activity" box and you are handling them in some random order. In web chat, they represent different customers you are chatting with at the same time.
Regards,
Geoff

I can't move my contacts ( phone numbers and email addresses) from outlook express to my 8900 phone

i can't move my contacts ( phone numbers and email addresses) from outlook express to my 8900 new phone through the usb cable.
i have the same contacts in both outlook and outlook express, can this help.
can anybody help

highland_ddmac wrote:
I have the 8900 and when I try and synch I get the error "unable to read application data". Very, very annoying.
Wondering why I switched from Nokia!
Can anyone help please??
Hi and Welcome to the Forums!
A lot more detail is needed to understand your issue...for instance:
Your specific BB Model
Your specific BB OS (all 4 octets)
Your DTM version (again, 4 octets)
Your PC PIM version
Your PC OS version
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to reuse standard Activity subcomponents - Appointments, Tasks, Phone Calls and Emails within a custom work center?

Requirement : We have a requirement to reuse the standard Activity subcomponents Appointments, Tasks, Phone Calls and Emails within a custom work centre. The requirement is to leverage and copy all sub functionalities Appointments, Tasks, Phone Calls and Emails available within the standard activity work center. This feature is available within Accounts, Opportunities, Leads etc. (Refer screenshot: Std_Act_Screen.jpg)
We are unable to consume/embed the standard Activity (Work center) sub components Appointments, Tasks, Phone Calls and Emails within the custom work center. This is because of backend consistency check violation UI designer error message displayed. (Refer screenshot:Error while consuming standard activities.jpg)
Ø Open Question:
a. Is there a limitation to consume/embed the standard Activity (Work center) subcomponents Appointments, Tasks, Phone Calls and Emails within a custom work center? We have noticed that this standard Activity Work center subcomponents Appointments, Tasks, Phone Calls and Emails has been repeatedly reused within the application in Account, Opportunity, Sales lead, Lead, Sales Quote Objects.
b. Is there an alternative way in which we can call [Through API etc..] the standard Activity Work center subcomponents Appointments, Tasks, Phone Calls and Emails?
We need your guidance to overcome the error to enable the reuse of the standard Activity Work center sub-components Appointments, Tasks, Phone Calls and Emails within our custom work center or suggest a suitable workaround on how this can be achieved.
Regards .. Dheeraj Saini

Whenever you find out let me know. I wanted to assign a text tone to someone and now in iOS 7 i can't. Or I haven't figured this out yet.

Quering Fax and Email items in ICWebclient

In ICWebClient The agent send fax and email, In the activity Clipboard, it should "Fax Out" and "Email" but I am not sure how to search them in Inbox or somewhere else. In Inbox I am selecting "Fax" but it does not comeup with any result.
Can somebody provide some more details for these two items , how they handeled?
Thanks & regards,
Johar

In ICWebClient The agent send fax and email, In the activity Clipboard, it should "Fax Out" and "Email" but I am not sure how to search them in Inbox or somewhere else. In Inbox I am selecting "Fax" but it does not comeup with any result.
Can somebody provide some more details for these two items , how they handeled?
Thanks & regards,
Johar

Is it possible to do fax and email through adobe?

Hi ,
I would like to know is it possible to implement fax and email functionality through adobe forms like smartforms.
regards,
vijay

hi ,
check this link ...
Re: Sending Adobe Interactive Forms via Email
regards ,
prashanti

Send smartforms as fax and email

Hi SAP gurus,
Can you please tell me on how to send smartforms as fax and email?
I would really appreciate your help.
Thanks in advance.

Hi,
Check the below link.
http://help.sap.com/saphelp_nw2004s/helpdata/en/a5/28d3b9d26211d4b646006094192fe3/content.htm
Thanks,
Sankar M

My phone was stolen, I have moved it in lost mode,but I can see that whoever has it,is changing phone name and can use it until I activate lost mode again.Can I do it permanently? How can I cancel ICloud back for the stolen phone,it blocks Cloud memory?

My phone was stolen, I have moved it in lost mode,but I can see that whoever has it,is changing phone name and can use it until I activate lost mode again.Can I do it permanently? How can I cancel ICloud back for the stolen phone, as I cannot delete the stolen phone backup (says that backup is being in use) and this is keeping memory occupied in the Cloud and I cannot back-up the other devices.

http://support.apple.com/kb/ht2526

HT5163 i have an old i phone 3s and was using it as an ipod. at the last update i got got a message saying there is no sim card in the phone. i do not want it to be a phone anymore. however the device has a locked screen saying it has no SIM card. how do

i have an old i phone 3s and was using it as an ipod. at the last update i got got a message saying there is no sim card in the phone. i do not want it to be a phone anymore. however the device has a locked screen saying it has no SIM card. how do i get back to unlocking the iphone and using it as an ipod again.
thanks

iPhones require a SIM card for activation, regardless of whether it is being used as an iPhone or an iPod.
Put a SIM in the device for the carrier it is locked to and activate it. The SIM can then be left it it or removed.

Fax to Email using the Same DID (Auto Detect) Cisco 2911 GW

Have a Customer that is wanting a Call into a DID that will Auto Detect the Fax tone and email that particular fax User's Email address using the same DID as their phone.
The system we are installing is CUCM 10.X and CUC 10.X on a UCS C220. They have PRI's.
* For Unity Connection to do this, it requires a Fax Server as far as we know. We read that Cisco had a Feasable method Natively on CUC, but nothing real concrete as to the steps to get that working without a Fax Server.
* For an IOS gateway to perform Fax detection, there is a 9 Second Call Delay (Major inconvenience) that must process before delivering the call as either Voice or Fax. This would be for 90 user's, which could be an issue.
What would need to be done in the Gateway to get this working if we went the Native method?
Any help is appreciated.
Thanks

I've never done this natively in CUC. Here's a guide that covers how to do it with the Fax server integration if that helps:
http://docwiki.cisco.com/wiki/Configuring_Fax_Detection_%28Single-Number_Voice_and_Fax%29_with_Cisco_Unity_Connection

Really fed up with multiple apple ID's and email addresses

I've been an apple product user for the best part of 5 years and I have two apple ID's, multiple iCloud alias's and a number of associated email addresses. Two questions:
Can all of my ID's be merged in to one account?
If not:
Can I create a new apple ID and transfer all my existing purchases from both of the other Apple ID's?
The way I see it is I paid for the content licence so I should be able to manage it as I see fit. Having multiple ID's seriously screws with my setting in iOS.
Thanks for the help!

Welcome to the Apple Community.
You can't merge accounts or transfer purchases from one account to the other. If you only have one account in use for iTunes, you could with a little effort transfer all your iCloud data from one account to another, so everything became part of the ID you currently use for iTunes.

Multiple PO output - fax and XML

Hello,
We implementing SRM 5.0 and have a requirement to output all PO's via XML and a subset of those PO's by vendor, via fax. I know that the default output is typically driven by Supplier set up but this only allows one default per Supplier.
Does anyone have any suggestions for how to manage multiple outputs automatically for one document?
Thank you,
Natasha

Hi,
There is two ways to achive this .
1. Process data in your driver program it self and populate subtotal and totals as internal table line items and just display it in the smart forms.
2. Insert a process logic line in your smartforms and play with the text you can display the total and subtotal.
Should you require further help feel free to get back.
Regards
Bikas

Output Through FAX and Email for Order Confirmation

We are yet to have this in our system and in requirements gather phase for my FS. I request you to help me in finishing this .
so far i considered the following
The following information is required :
1. To all SD documents ? ( For eg : Order Confirmation,Delivery Note ,
Legal invoice )
2.Need to have a fax number/Email maintained for a customer
3. Frequency of the ouput?
4. Is duplication of output through email/Fax is required ?
5. If sent by mail, in simple mail/ an attachment in pdf required and
what shall the subject line contain?
Please guide if i am Missed any requirement gathering . pls write me or send some kindaa FS

Hi Yuvraj
Kindly check the links for the output configuration and other inputs also
[https://wiki.sdn.sap.com/wiki/display/ERPLO/OutputDeterminationOverview]
[https://wiki.sdn.sap.com/wiki/display/ABAP/SendSpoollistofbackgroundjobtoSAPinbox]
[https://wiki.sdn.sap.com/wiki/display/ABAP/PDFDownlaodByCreatingSpool+Request]
Regards
Srinath

Maintaining Multiple Vendor Phone Fax and Email using IDOC

Similar Messages

Maybe you are looking for