Maintenance dialog for table
Hello folks,
I had successfully created a table and I tried inserting some records in to the table using table maintenance.
I received the following error.
'The maintenance dialog for table zxxx is incomplete or not defined'.
What does this mean?? And what should I do??
I am pasting the detail help over this error.
The maintenance dialog for ZTV_DBS_RANGE_NO is incomplete or not defined
Message no. SV 037
Diagnosis
The called function with the view/table ZTV_DBS_RANGE_NO needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
System Response
The called function cannot be performed.
Procedure
Generate the required maintenance dialog.
Please help
You have to create the maintenance dialog for table you would like to use with transaction SM30 / SM31.
To do this look the transaction SE55.
(or SE11, select the table, MODIFY, (menu) Utilities -> Maintain dialog ... )
Regards
Frédéric
Message was edited by: Frédéric Girod
Similar Messages
-
Problem with a maintenance dialog for a table
Hi,
I created a table (ztable) with transaction code SE11 and a transaction (ztransaction) with SE93 to manage this table (ztable).
When I use the transaction "ztransaction", I have a message like this :
"The maintenance dialog for ZTABLE is incomplete or not defined".
What can I do ? How can I complete or define the maintenance dialog ?
Thanks in advance.
Regards.
C.First after creating a table you should creat a Table maintenance generator.
Utilities -> Table Maintenance Generator .
After creating Maintenance goto
Environment -> Transaction
This will succesfully create a transaction for your table
You should give parameters while creating the transaction.
UPDATE = 'X'
VIEWNAME = your table name
Bhupal -
Maintenance Dialog for T25* Tables in Tcode KES1
Hello,
I am getting an error saying there is no Maintenance Dialog for T25* tables in KES1 Transaction. Please let me know how to go ahead and solve this issue.
Thanks very much in Advance.
regards,
MaheshHi,
I am also getting the same error "Maintenance Dialog for T25* Tables in Tcode KES1"
Did anybody have any solution for this.
Regards,
Mohan -
The maintenance dialog for V_AISUSER is incomplete or not defined
I was not able to assign S-user for SAP Support Portal functionality from SPRO. I received this error and my ABAPer didn't seem to able to help...would anyone ever got this error message and/or know how the resolution?
The maintenance dialog for V_AISUSER is incomplete or not defined
Message no. SV037
Diagnosis
The called function with the view/table V_AISUSER needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
System Response
The called function cannot be performed.
Procedure
Generate the required maintenance dialog.
Thank you in advance for your assistance.
Regards,
FrancHi Nesimi,
I wasnot able to maintain the "assign S-user fro SAP Support Portal functionality" by drilling down the following path from SPRO>SAPSolMan>Configuration>Basic Settings>Standard Config of Basic Settings>SolMan>Connection to SAP-->Assign S-user for SAP Support Portal functionality.
I have to follow the following path to maintain Table "AISUSER" = SPRO>SAP SolMan>Config>Scenario-Specific Settings>Service Desk>Service Provider SW Partner>Maintain Table AISUSER.
What's a ditto...
Thank you again for your time.
Cheers,
Franc Nguyen -
The maintenance dialog for J_2IVLYCTR is incomplete or not defined
Dear experts,
In transaction code J2I7 following error is appering
The maintenance dialog for J_2IVLYCTR is incomplete or not defined
Regards,
ABHIJEET JOSHIHello,
This depends on the version and release level, Please check this veiw of J_2IVLYCTR . If these below given entries are not their then
MANDT MANDT CLNT 3 Client
BUKRS BUKRS CHAR 4 Company Code
REGISTER J_2IREGSTR CHAR 10 Register name
LAYOUTNR J_2ILAYNR NUMC 3 Layout number
LAYOUTNAME TDFORM CHAR 16 Form Name
LAY_DESC J_2ILAYDES CHAR 64 Layout description
PROGRAME PROGRAM CHAR 40 Program/transaction in SQL trace analysis
ROUTINE J_2IROUTIN CHAR 30 Form routine
NOOFCOPIES J_2INOCOPI NUMC 3 No. of copies
OUTDEVICE RSPOPNAME CHAR 4 Spool: Output device
if not available add these entries in above mentioned table and check J1I7 tcode.
Regards
Mahesh Naik. -
The maintenance dialog for SM 30
Hi i am maintaining a table through SM30. and i have used one display field in transaction for that table. when i am entering data through transaction that disply is getting displayed when i press ENTER. but when maintaining through SM30 thet display Maintanance dilog Incomplte,
then i went tbel maintanance and create ,but it doesnt save
please help me
This is the error i am getting'
<b>The maintenance dialog for ZFT017_GLCST_TR is incomplete or not defined</b>
kanishkaHi,
there is a prob in Table maintenace Generation Cretaion.
se11> table name> change.
Menu- utilities- table mauintenace Gen .
Give Authorisation Grp and Funct Group.
Single Step
Provide Screen No.
Then Assigning the tCODe.
Se93.
In this U shud give TABLE VIEW : TABLE NAME.
UPDATE : X <----
Ensure This u have given.
Rvert Back if any issues,
Reward with points if helpful.
regards,
Naveen -
Error : Maintenance dialog for ztable is incomplete or not defined
Hi Gurus
While maintaining the ztable through SM30 got the following error.
Maintenance dialog for ztable is incomplete or not defined
I have to add new enteries in the previously created ztable.
Please suggest
ManvirGo to SE11, give the table name and click on change. Then Go to utilities--> Table
maintenance generator.
In the table maintenance generator screen, we should give Authorization Group,
Function Group name (Function Group name can be same as table name),
Maintenance type can be one step or two step, usually we will create with one
step. we should give maintenance screen number. After clicking on create button,
a table maintenance generator will be created.
To check it go to SM30 . In SM30, we find display, Maintain options.
We can view the table contents by choosing Display and we can create table
entries by choosing Maintain. -
Maintenance Dialog for V_T7INDA_OFFGRP does not exist
Hi Friends,
I have tried to enter the values in the view V_T7INDA_OFFGRP, but I am
getting a message, that 'Maintenance Dialog for V_T7INDA_OFFGRP does
not exist'.
When I went to se54 to create the Maintenance Dialog, I am not able to
see the View V_T7INDA_OFFGRP in the funtion group HRPBSINDA_DDIC.
Can you please help me how I can creat the Maintenance Dialog for this
view.
Thanks,
Suresh Kumar PaturiProcedure compiles OK if I replace
SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
by
pseudoRandomSeed := DBMS_UTILITY.GET_TIME;
I still would like to understand the reason of the error as why the procedure cannot compile with SELECT hsecs INTO pseudoRandomSeed FROM V$TIMER;
Thanks -
The maintenance dialog for T2538 is incomplete or not defined
hi to all
i was trying to configure tc. KES1 in CO-PA trying to maintaining characteristic values.
does anybody give idea HOW TO MAINTAINE DIALOG FOR T2538
V V URGENT
HARIHi Hari,
Please let me know the solution for the issue if you have mentioned as i am exactly facing the same kind of issue.
regards,
Mahesh -
Create a Maintenance view for table T500P
Hi Experts,
We have a requirement where customer want an additional field in table T500P and for the same a custom maintenanve view has to be created.Moreover, If there is any update insert or change in the ZView/Ztable the same should be reflected in standard table T500P.
Steps already taken :-
We have created a ztable (copy of T500P ) and add the required custom field to it.
We have also copied the view i.e V_T500P to our custom view and also use base table as T500P .
We also create a foreign key for PERSA in Ztable and use T500P as check table for that with cardinality 1:1.
To update the MOLGA & BUKRS field data in ztable we have set both the field as a primary key & create a foreign key with check table T500L & T001 & cardianality as 1:CN for key fields.
In custom maintenance view we have set the realtionship of ztable t500l & t001 with the base table T500P.
Now, if we are trying to maintain the view only T500P table is getting updated and Ztable is updated with only PERSA value.
Please provide some directions for the resolution of this issue.
Thanks,
Pooja Goel.Scheduler007 --
The view you selected by clicking File > Options > Project View is the default view for every new project you create from a blank project template. This is a global option, so setting it from the checked out Enterprise Global file serves no purpose.
When you select a view as your default view, you will see that view applied to the blank project that is opened when you launch Microsoft Project 2010, and you will see it applied if you create new blank projects. If you create enterprise templates for
people to use in your organization, you should simply apply the view to the template that you want as the default so that users will see this view immediately when they create a new project from the template. In addition, if you apply a view to an open
project, close and check in the project, and then reopen the project, you will see the last view applied in that project (as Guillaume correctly points out).
Beyond this, there is no method possible for the Project Server administrator to specify a default view for the Microsoft Project application used by the project managers in your organization. This is an option each PM must set. Hope this helps.
Dale A. Howard [MVP] -
Adding F4 help to a field in a table maintenance dialog
I have used SE54 to create a maintenance dialog for my table. I need to be able to use F4 in a field in the maintenance dialog that will read several values that have been entered into the table (in the same row) but not yet saved and then execute an SAP delivered function module that will present the user with valid selections based on the data input.
I am somewhat familiar with events and modifications in SE54 but I am struggling with how to implement this.
Thanks for your help
Corwin SlackHi Corwin,
You can have Process on Value-Request on your screen where the field exist. You can use SE80 to edit the screen of the function group that table maintenance generator created.
1. Edit the screen using SE80.
2. Place a 'process on value-request' at the bottom of the flow logic.
3. Below that, put this line
field fieldname module get_help.
4. Double click on GET_HELP and create an input module pool program.
5. In this module pool, pass the values of the other fields in your screen to the function module that can provide you the list of values
6. Use function module F4IF_INT_TABLE_VALUE_REQUEST within this module pool to popup the values.
However, please keep in mind that the values from other fields on the screen are not populated in its field unless you hit enter. -
Maintenance Dialog is missing or not maintaned
Hey...I am new in ABAP. I created a function group in dev environment and this function group consists of a database table with maintenance view and it has a transaction code. After I transport into quality environment, when i execute the the transaction code, it said that the maintenance dialog for the table is missing and not maintaned, when i checked the transport request is successful without any error. I am not sure what is the problem, Anyone can help? Thanks
Hello
Maintenance views consist of the DDIC objects and a couple of entries in SAP standard tables. If these entries are not transported to the next system you will get the error message as described.
To ensure complete transport of your maintenance view
1) call transaction SE54,
2) enter your maintenance view (description should be table/view) and
3) choose menu Utilities -> Total Transport
This will result in a complete transport request for your maintenance view.
Regards
Uwe -
Field WTGBTR not contained in nametab for table CE1E_B1 / Message no. KE543
Hello,
In a new sandbox, when I'm trying to maintain values for user defined characteristics using KES1, it says it cannot find the maintenance dialog for the table T20XXX.
Accordingly I executed the program - RKEAGENV to regenerate views for all user defined characteristics, but while doing same, I'm getting the below error, and it comes out.
Field WTGBTR not contained in nametab for table CE1E_B1
Message no. KE543
I have no reference to that field either in COPA data structure.
I have re-generated/re-activated COPA and executed RKEAGENF and also tried executing RKEREOFC. But still with permuations all these, the error persists.
May you please help
Thanks
BallaHi,
If you get error msg KE543 i.e 'Field ... not contained in nametab for table CE1E_B1' then (even if you don't use E_B1)
Run report RKEAGENF for banking template operating concern E_B1.
The selection fill up as follows:
Operating concern: "E_B1"
Structure: leave blank
Type of CO-PA: "1"
Refill? : "X".
Then a run of report RKEAGENV should proceed successfully.
regards
Waman -
Field WTGBTR not contained in nametab for table CE1E_B1 / Message no. KE54
Hello,
In a new sandbox, when I'm trying to maintain values for user defined characteristics using KES1, it says it cannot find the maintenance dialog for the table T20XXX.
Accordingly I executed the program - RKEAGENV to regenerate views for all user defined characteristics, but while doing same, I'm getting the below error, and it comes out.
Field WTGBTR not contained in nametab for table CE1E_B1
Message no. KE543
I have no reference to that field either in COPA data structure.
I have re-generated/re-activated COPA and executed RKEAGENF and also tried executing RKEREOFC. But still with permuations all these, the error persists.
May you please help
Thanks
BallaHello,
You try follow the instructions in SAP note 872175 and apply solution of the SAP note
942785 in order to successfully run program RKEAGENV i.e run the program
RKEAGENV in the debug mode and set the parameter no_jb to 'X'.
It is not enough to just apply the coding corrections in the notes.
You also need to follow the instructions mentioned in both the notes.
1. Activate and Execute report ZJBREOFC
2. Run report RKEAGENF for banking template operating concern E_B1.
The selection fill up as follows:
Operating concern: "E_B1"
Structure: leave blank
Type of CO-PA: "1"
Refill : "X".
Then a run of report RKEAGENV should proceed successfully.
Regards, -
How to maintain the maintainence dialog for a Ztable?
Hi all,
I created a Ztable in the database and it looks good. But when i am trying to use SM30 T-code and trying to enter the Ztable name and click on the Maintain tab...i get a message called
"The maintenance dialog for ZCUSTUM_TABLE is incomplete or not defined
Message no. SV037
Diagnosis
The called function with the view/table ZCUSTUM_TABLE needs a special maintenance dialog which, however, either does not exist at all, or does not exist completely.
System Response
The called function cannot be performed.
Procedure
Generate the required maintenance dialog.
Can some one help me how should i maintain 1- 2-step maintenance dialog for the table?
If anyone encountered this situation before, please help me figure out what is going wrong
Regards,
Jessica SamHi,
For the Authorization group allows extended authorization protection for particular objects.
Here it depends but we can also give authorization group as &NC&
and overview screen you can give any screen number say 100 and single as 0.
It all depends on the maintenance type that is one step and two step
The difference is that in case of one step we will be displayed one screen when we open sm30
and can make any number of entries at one time. but in case of two step we can make single entry at a time.
Hope it will be benificial for you.
Regards,
Nitin.
Maybe you are looking for
-
Hello: I recently found 2 old B&W negatives from my fathers belongings which are actually 8x10 size. I just scanned them using my Epson NX420, hoping there was some quick edit choice which allowed me to just invert from negative to positive, but I ca
-
Compilation error with BPEL Process:::
Hi All , I am nadly stuck at compilation of a BPEL error . The error message is like this : Error: [Error ORABPEL-10902]: compilation failed [Description]: in "bpel.xml", XML parsing failed because "undefined part element. In WSDL at "file:/C:/Docume
-
i m having problem in sending sms. txt msgs r being sent very late. its still in pending. what is the problem? and how can i send picture msg(not MMS)? there is no option for adding picture msg into txt msg. plz kindly help me.
-
Hello, I have created two customer exit variables, although I'm not an ABAP expert. Both are calculated based on two optional variables selected by the user. When running my query I get the message "Warning Value '' is too long for variable ZPERSTRT"
-
I have a photo montage, that i'm trying to open. But it keeps crashing on the "Preparing for video display" portion. I cannot get back to my project, how can I fix this!