Maintenance Optimizer - Can't create new transaction
Hi,
My SolMan system is at SP15 on the ABAP stack and due to project politics the Java stack is at 12
I use the maint Opt transaction quite often due to a upgrade project we are undergoing and it seems that when i create a new Maint Opt transaction and select a system it displays these messages:
Warning Status was reset by system
Warning There is already a transaction for the systems of this product version
I had a look and found this note 1030498 and went through it but it seems i still get the error message. Does anyone know if the problem is somewhere else?
Thanks,
Mani
Hi,
I have to say that this is actually not an error. It is not allowed to
process two maintenance transaction for the same system.
You may withdraw the previous maintenance transaction by clicking on
the "withdraw" button.
You may also deactivate the checks following the steps below then you
would be able to continue with the transactions in spite of the
message "There is already a transaction.....".
SPRO
-> Solution Manager Implementation Guide
-> SAP Solution Manager
-> Configuration
-> Scenario-Specific Settings
-> Change Management
-> Change Request Management
-> Extended Configuration
-> Change Transaction
-> Change Transaction Types
-> Consistency Checks in Change Request Management
-> Assign Conditions to Status Values
Please change the condition 'SYSTEM_ASSIGNMENT' for the
transaction type 'SLMO' in respect of the message type from 'Cancel'
to 'Warning'.
Best regards,
Felipe Pitta
Similar Messages
-
MOPZ issue :Unable to create new transaction
Hello All,
We have recently installed ECC6 EHP5 ready, and now want to apply the latest patches for it.
when I try to create new transaction from DSWP-->change Management -->Maintenance Optimizer -->Crete new trasaction it is throwing an error .
I have sufficient authorizations from both ends (solmon system and to my s-user)
Solmon roles -->YY(SOLMAN_BASIS_MAINTAIN)
YY(SOLMAN_DSWP_ADMIN)
YY(SOLMAN_ISSUE_MGMT_MAIN)
YY(SOLMAN_LANDSCAPE_MAIN)
S-User Roles --> Maintain System Data Authorizations
System Details:
EHP1 SOLMON 7.0
AIX5.3/ORACLE 10g
Can any one guide me what is the exact problem and how to avoid the same.
ERROR Log from the dump raised
A RAISE statement in the program "CL_SM_DATA_SENDER_RFC=========CP" raised the
exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
url level error log which showed on the browser
Error when processing your request
What has happened?
The URL http://ussappsm00.corpnet2.com:8055/sap/bc/webdynpro/sap/wda_mopz_plan was not called due to an error.
Note
The following error text was processed in the system PSM : Exception condition "NOT_FOUND" raised.
The error occurred on the application server ussappsm00_PSM_55 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_DESTINATION of program CL_SM_DATA_SENDER_RFC=========CP
Method: GET_ASSIGNED_SUSERS of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_SHORT_TEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: LOAD_CONTEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: IF_COMPONENTCONTROLLER~LOAD_CONTEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: HANDLEDEFAULT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system PSM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ussappsm00_PSM_55 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ussappsm00_PSM_55 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: RRD42469 -l: E -s: PSM -i: ussappsm00_PSM_55 -w: 0 -d: 20110715 -t: 041437 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Awaiting your response.
Best Regards
RakeshHi,
You will need the standard SAP Change Management work center role assigned to you. If custom role it should be derived from this role SAP_SMWORK_CHANGE_MAN
Regards,
Srikishan -
Maintenance Optimizer List displays many unfinished transactions
Hello,
In our solution manager, many unfinished maintenance transaction are displayed:
<i>8000000080 New Maintenance Optimizer procedure 3: Medium New 15.10.2007 05:30:05 DDIC
8000000071 New Maintenance Optimizer procedure 3: Medium New 24.09.2007 07:52:45 DDIC
8000000070 New Maintenance Optimizer procedure 3: Medium New 12.09.2007 22:13:56 DDIC</i>
These are not relevant and were created while training. How can I get rid of them??
Any help appreciated.
regards, ShantanuHello,
We still cannot get rid of this one. Any experts on these please??
regards, Shantanu -
** Create New Transaction Check Box in BPM
Hi Friends,
I have ticked the check box 'Create New Transaction' for every step in BPM. In Block I have mentioned 'Block Start' & 'Block End' property as 'New Transaction'.
I have gone through SAP Help Transactional Behaviour of BPM. Somewhere it is mentioned by check this to increase system performance, database hit time will be reduced. Somewhere 'No New Transaction' is recommened.
I am confusing on this.
Could you kindly help me to understand this clearly ? (Like, what is the advantage of 'Create new Transaction'?, If untick what will happen ? ...)
Kind regards,
Jegathees P.it depends on how you decide to use the property.
in help it mentions;
Transactional Behavior for Specific Step Types
At runtime, the system normally creates a separate transaction for each step. The transaction then covers this step only. However, you can influence the transactional behavior of particular step types. In the step properties, you can define that the system is not to start a new transaction when the step is executed. The system then executes the step in the transaction that was started at the time of execution. Consequently, no background work item is created for the step and the database does not need to be accessed. In this way you can improve system performance.
by defining to not use a new transaction at the right place you can improve performance.
It also depends on step types. For example in case of a sync send this is what help says;
No New Transaction: You can expect better system performance if the system does not create a new transaction for the send step. However, only select this setting if by repeating the send step the result is not changed (idempotency). This is the case, for example, with lookup operations.
Note
If you have selected this setting and an error occurs, synchronous sending can also cause problems in the pipeline and the receiver system following the rollback. Messages with an error status can also remain in the pipeline.
New Transaction: If the result is changed when the step is repeated, choose Create New Transaction. Otherwise the following error situation can occur: The system successfully executes a synchronous send step but an error occurs in the subsequent step. The system rolls back processing and executes all steps in the transaction - including the send step - again. If the send step results in a write-to operation in the receiver system, for example, creating a purchase order, this is also repeated. This can result in semantic errors.
Mainly transaction processing helps to have a roll back implemented. -
Create new transaction (Business Activity) and assigned to user Problem
Dear sir,
We already have the business activity with in T-code : CIC0, The transaction is ZACT1 and assigned to user group1 . It's working fine. However when I copy something from transaction ZACT1 and create to be T-code : ZACT2 . and assigned user group2. There is the problem that when log on to CIC0 . It is the authorization from for transaction ZACT1. WHen I go to su53
it need to have the authoriazaiton on Business transaction type: ZACT1
Please kindly advise.
Thank you and best regards,
VimolWhen you create new transaction variant, original transaction remains as it is. During creation of transaction variant, when you go to one by one screen, screen variants are created. It uses variant name and can be see on each screen on the top.
Once you complete trasnaction, you start using this transaction variant instead of original transaction. In SHD0, there is button on the top 'assign screen variants' which allows you to assign all screen variants created above. You can refer help file which i think has procedure to do this. -
CcBPM - what does meant "Create New Transaction" properties ?
Hi XI expert,
could you enligtheen me on what is the meaning of "Create new transaction" properties in step Send, Transformation in the ccBPM. When i need to tick this properties. ?
Cheers
FernandSpecify whether the system is to create a separate transaction for the send step.
You can improve system performance if you define that the system is not to create a separate transaction for the send step. Note, however, that all messages to be sent are collected and not sent until the end of the relevant transaction. This is of particular importance for transactions that take a long time to execute.
An asynchronous sender step that waits for an acknowledgment must always be executed in a separate transaction. -
Creating new transaction calling TC- GR55?
Hi Abap-Experts,
1]I want to create new transaction.
2]The name of the new transaction should be ZMGRO.
3] It should call transaction GR55 and choose report group MGRO.
4] The first screen for the user should be the selection screen to run the report group.
I think i can create transaction in se93...but don't know how to perform 3rd and 4th task listed above.
Thanks in Advance,Dear Nitin,
just create an transaction via transaction SE93 in the following way:
1.) Call transaction SE93
2.) Enter the name of your new transaction "ZMGRO" and press the button Create
3.) Enter an short description of your new transaction and choose transaction with parameters
4.) Enter
- transaction "START_REPORT"
- scrip 1st screen
5.) Enter following fields in the table-control bellow:
D_SREPOVARI-REPORTTYPE RW
D_SREPOVARI-REPORT MGRO
D_SREPOVARI-EXTDREPORT
D_SREPOVARI-VARIANT
D_SREPOVARI-NOSELSCRN
Via the field D_SREPOVARI-VARIANT you can also enter an selection-screen variant, wich you want to be set als default variant. -
My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????
Why do you need to create a new account?
Just change the payment method.
http://support.apple.com/kb/ht1918 -
When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password
See
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
which also apply to Mtn Lion and Macericks. -
Can we create new partner types for quallity notifications in SAP system?
Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
NileshI know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM -
Can we create new cref.exe
Hi all,
suppose if we modify the source code present in java card framework and then compile them to class files, converting these class files to JCA files , generating mask files from these JCA files, and using these mask files along with C code available to create new cref.exe
Is it possible to do the above steps.
Thanks in advance
murali920553 wrote:
can we create new LOV's using forms personalizationhttps://forums.oracle.com/forums/search.jspa?threadID=&q=personalization+AND+LOV&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Can We Create New Categories and Folders?
I hate having all of my apps piled up in the "ALL" category. Can we create new categories such as "Business Apps" or "Education" in order to stay organized? If not can we at least create folders within the existing catefories?
Solved!
Go to Solution.I read a response to a similar question yesterday on this forum. The BlackBerry tech said it is not an option right now but you can choose your favorites and have them show in the favorites section. Maybe folders will be available later. Enjoy the new tablet I know I am.
-
I have a question, can i create new CRM(Conflict resolution Manager) additionally in 11i EBS..?
do we find any scripts to check about concurrent managers in EBS from back end(sqlplus )..?yes default installation give you some scripts to check about concurrent managers.
The following SQL scripts located under $FND_TOP/sql :
1. afimchk.sql Tells the status of the ICM and PMON method
2. afcmstat.sql Lists active manager processes
3. afrqrun.sql Lists all the running, waiting and terminating requests
4. afrqwait.sql Lists requests that are constrained and waiting for the ICM to release them
5. afrqscm.sql Prints log file name of managers that can run a given request. It can be used to check for possible errors when a request stays in pending status. It requires a request id value.
6. afcmcreq.sql Prints the log file name of the manager that processed the request
7. afrqstat.sql Summary of completed concurrent requests grouped by completion status and execution type. It requires number of days prior to today on which to report parameter.
8. afimlock.sql Lists locks that the ICM is waiting to get
9. afcmrrq.sql Lists managers that currently are running a request -
HT201240 I forget my password and hint . How can I create new password ?
I forget my password and hint in MacBook Air 11-inch mid 2012 . How can I create new password .
Reset Password
OS X 10.7 Lion /10.8 MountainLion
Follow the instructions in the first and the third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
http://support.apple.com/kb/PH10623
Best. -
Can we create new tablespace in Oracle Database 10g Express Edition?
Hi,
Can we create new tablespace in Oracle Database 10g Express Edition instead of using the default "users" tablespace provided?
Please advise.
Thank you.Correct. The sum of all user tablespaces is not allowed to exceed 4 GIG.
You could try shrinking your tablespaces. Theres a script called maxshrink on http://asktom.oracle.com which is useful for this.
You could compress your tables.
If you are storing lobs, you could consider storing them as bfiles.
Or upgrade to Oracle Standard Edition 1. Its not that expensive.
Maybe you are looking for
-
Brightness with bootcamp and windows 8.1 on rMBP 13 2013
Hi, I've googled for this issue and i've found many potential solves of my problem: - Turning off adaptive brightness - disabling Light sensor in Device Manager - deleting SensorsAlsDriver.dll Nothing works. I'm actually using Win 8.1 Pro N x64 with
-
I can't use my apps: serial number is required but I have an student edition!
Please, help me! I can't use my apps. I haven't a serial number because have an cc student edicion. What can i do?
-
Hello, we are using PO confirmation in order to track the orders. Each time we capture a confirmation (under the confirmation tab), a message is generated for Purchase order changed. We would like to customize the output determination for confirmati
-
Hey there, Ive had a recent issue with my 2011 macbook pro. Recently both usb's stoped working entirely (iphone wouldnt conect, flash wouldnt conect, wireless mouse wouldnt work). After doing a PRAM reset the mouse worked fine for about 2 hours, af
-
Hi all, I'm having astrange problem while selecting dates. Could someone please tell me what's wrong: I'm selecting from S_ASSET_CON, and ATTRIB_26 is the name of the problematic field: desc S_ASSET_CON; Name Null? Type ATTRIB_26 DATE The query: SELE