Maintenance Optimizer says "Status profile doesn't exist"

Hi all,
I'd like to use the Maintenance Optimizer to install some support packages.
When I start it, I get the error message "Status profile SLMO0001 does not exist. Please check. Create the status profile  or use a valid status profile."
How exactly do I create this profile? Or what profile am I supposed to use and how do I make the MO use that one?
I tried running the transaction SM_PREP_MAINTENANCE_OPTIMIZER, which did not help.
Thanks for your help.
Paul
PS: I also get the warning "Customization not available in logon language EN, use language EN.

Hi,
I just got an error, I think you might have the same.
This SAP note will help on the problems.
Note 1030498 - Maintenance Optimizer - IBase is not active
Actually, 1030498 solved everything. It is in this note 1024932 - Maintenance Optimizer: Collective Note.
Thanks.

Similar Messages

  • Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

    hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

    Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
    Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
    Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
    Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
    This is what you should properly seeing (but with different apps listed):
    See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

  • Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

    Just published a new site to an FTP server and I got a 404 error message saying the site doesn't exist. When I retype the name of the site, I get a page from my hosting service saying this is the future home of [my site]. Any ideas?

    Hi roddy,
    thanks for responding. I read your link, looked at my settings and they were all correct. I tried to do a republish and got this message: The requested URL /childrenandcaring/index.html was not found on this server.
    When I type the address in the address bar, I go to the site and the page says: This is the new site childrenandcaring.com
    Any other ideas?
    Suzanne

  • New user status profile applied to existing transactions

    Hello experts,
    We have been live for nearly a year and a half with CRM service 5.0 and are now preparing to upgrade to 2007. A new requirement to manage transaction item status through authorizations (B_USERSTAT) has been introduced at contract item level. We have tens of thousands of existing line items in production, but a user status was never maintained for the associated item categories.
    We can apply a new status profile to the relevant item category, but that seems to only be enabled in new transactions, not existing ones. Existing transactions are therefore not relevant for the new authorization settings in B_USERSTAT authorization object.
    Does anyone know of a utility or means by which we can "refresh" existing business transactional data to reflect the new user status profile?
    Your assistance is appreciated.
    Allon

    Hi  robert,
    I have requirement lilke this. In my case, i removed an existing user status 'Open' from the status profile for service ticket. it is reflecting in my new creating tickets..But existing all tickets have same status profiles (i.e) 'Open' is still there.. How to update the existing records???
    regards
    Logu

  • ITunes doesn't load - saying "Directory iTunes doesn't exist" ????

    Dear all,
    I have reinstalled iTunes 7.xx and get the same error when trying to start iTunes. The error message tells me: Directory "iTunes" doesn't exist in Dir: "Eigene Musik", but it exists. What am I doing wrong ?
    Could I please get some help ?
    Thanks in advcance.
    Best regards,
    Manfred

    hmmmm. does that message seem like a German version of the following message?
    "The folder iTunes cannot be found or created and is required. The default location for this folder is inside the Music folder."
    if so, the following document is the best place to start:
    iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
    ... but if you run into the complication where "My Music" doesn't appear as an option in TweakUI, perhaps try the alternate procedure from the following Nigel Carpenter post:
    Nigel Carpenter: re: Itunes problem

  • Made an account and put $25 gift card on it, now it says the account doesn't exist?

    Anyone help?

    Where did you make the account? If the is with your Apple ID, see the link below.
    There is a contact link.
    Apple ID Support

  • Mass Maintenance for flag in Status Profile (Quality Info-record)

    Hi Experts !
    I have thousands materials to change in mass the level in the status profile of Quality info-record.
    Unfortunately, QI05 - QI06 - QI07 don't allow to do this in mass maintenance mode. We can add, change or delete status profile but no more. You don't have access to the different level to apply for example LEVEL 3 (Ship to line) for all list of materials.
    Many thanks for your help.
    Stéphane

    Using your way, we can not change the flag with mass maintenance.
    You can just add a new one or delete an existing one.
    What I would like to do is :
    Change in mass maintenance all flag from Level 1 to Level 2 in Status profile of all existing Quality info-record or list of them.
    QCC2 is customizing for Notification.

  • If I try to log in to my Hotmail account in Firefox, Hotmail says my Hotmail account doesn't exist, while I can problemlessly log in in other browsers

    When I open Hotmail in Firefox and try to log in, Hotmail says my account doesn't exist. But I can problemlessly log in in other browsers, so I'm sure there's no problem with my account. Further, I'm absolutely sure I didn't misspell anything. Before this problem occured, I've always been able to log in to my Hotmail account in Firefox. I've already tried clearing my cookies and history, but it still doesn't work.

    Do you have stored any form fill data or passwords for live.login.com?
    Use these steps to remove saved (form) data from a drop down list:
    #Click the (empty) input field on the web page to open the drop down list
    #Highlight an entry in the drop down list
    #Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Which security software (firewall, anti-virus) do you have?

  • Assigning authorization to status in cFolder status profile

    Working with cFolders, I've written a function module that creates a status profile with statuses for use in a collaboration.  The status profile, several statuses and status transitions are being successfully created.  I am adding user group and role authorizations to the status profile using cl_cfx_api_authorization->set_authorization. 
    I am trying to add user group and role authorizations to a couple of the statuses as well but that isn't working for me.  I'm trying the same set_authorization call as above but I get an error back saying the object doesn't exist.  The message gives me the ID for the status which does exist in the cfs_status table. In stepping though the code it doesn't appear that this method works with statues.  I have used it successfully with collaborations, work areas, and status profiles that I've created.
    Does anyone know how to add user group and role authorizations to a status? Or could someone point me to some documentation?  I'm having trouble finding anything on the cFolder related classes and function modules.
    Thanks
    Terry

    Hello Everyone,
    The statement that,
    According to SAP at this time there is no api call for adding authorizations to the status or status transitions of a status profile.  This has to be done through the user interface.
    still holds good? Has anyone tried setting authorizations for cFolder?
    Ganapathi

  • Profile does not exist on server error message

    I am able to sign in to the support community, but when I try to update my preferences it says my profile does not exist on the server.  Any Ideas?

    Hi, Jon -
    The new design for these forums does not handle usernames (aliases) with special characters in them very well. In this context, 'special characters' includes accent marks and, in your case, the use of a slash as in "Mac/Video" and probably the inclusion of the colon after "Jon". Some of the symptoms reported include not being able to log in at all, or not being able to get to one's Profile (because the system can't find it).
    I will ask the Hosts to get in touch with you about fixing things so you can re-acess your account settings.

  • Help! My site doesn't exist anymore and the cache won't clear!

    Hi there,
    I'm a designer and used iWeb to create a portfolio for myself while I was job searching earlier in the year. I hosted it through MobileMe, and coincidentally and luckily managed to get a new job about a week before those hosting services were discontinued, so I never rehosted the site on my own domain. I happened to Google myself a couple of months ago and was horrified to find that my resume page from that site shows up in the search results, with my home address, phone number, etc in the results summary since they were at the top of the resume page on my site. Clicking the obviously says that it doesn't exist. I tried using Google's cache removal tool which supposedly would clear it since the site doesn't exist anymore, but that was about six weeks ago. I just checked, and it's still there - moved up, even, to the third search result! I am going to continue to try to handle this with Google, but is there anything I can do on the iWeb end? I deleted that page from my computer but I'm pretty sure that's irrelevant since the site technically doesn't exist anymore.
    Any help would be greatly appreciated - I can't stand having my private information out there like that!
    Thanks, Mardie

    You asked the same question in december last year.
    And you received the same answer.
    https://discussions.apple.com/thread/4578880
    Apparently it solved the problem.
    And  you also seem to have zero knowledge of how Google works.
    Here's how it works :
    Publish page.
    Google find page.
    Google indexes page.
    Everybody embarrassed.

  • Characteristic doesn't exist in planning area when running hierarchy STS.

    Hi All,,
    Could anybody help me regarding this problem please ???
    In STS Customizing - IP, i'd like to determine Hierarchy for Subplan, but I always get this message: " Characteristic ZSTSHIER doesn't exist in planning area ZPA01".
    Prior to determine Hierarchy, I've already defined Subplan, Planning Session. I also have already created Planning Area containing characteristic: ZSTSHIER (but I only create for planning area).
    In the prompted window of determining hierarchy, after I define the planning area, I can see the respective Hierarchy Characteristic.
    But when I execute it, It always says " Characteristic ZSTSHIER doesn't exist in planning area ZPA01" .
    Could somebody help me please ??
    Is it SAP Bugs / Do I miss one thing to do ?
    Thanks a lot
    Best regards,
    Daniel N.

    Hi Andrey,
    Thanks so much for your respond.
    The "execute it" means when i'm determining Hierarchy for Subplan.
    It always says "Characteristic ZSTSHIER doesn't exist in planning area ZPA01".
    However, I can see the hierarchy ZSTSHIER in Planning Area inside Master Data tab. I have already created the Hierarchy within ZSTSHIER using RSA1.
    The weird thing that I'm able to define Hierarchy Basic Characteristic and Hierarchy Name within under respective Planning Area.
    Would you kindly help me please ?
    What's going wrong here ? Is that something missing yet to be done ?
    Really need your guidances.
    Best regards,
    Daniel Nurindra.

  • Maintenance Optimizer in SAP Solution Manager

    what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

    Hi
    even this may be useful
    Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
    Download from oss most recent step-by-step setup guide
    Oss note 1024932
    Oss Note 1008717 ( N/A )
    Relevant up to SP11 for Basis 700
    OSS Note 950975 support for IE7 ( N/A we are using GUI)
    Oss note 975510 – corrections for snote ( Via OSS not snote )
    Oss note 1004691 – corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
    Common problem notes, but not critical for Maint Opt
    0998987: Maintenance Optimizer: Empty error messages
    1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
    1020789: Maintenance Optimizer: Allow all systems to be selected
    1020802: Maintenance Optimizer List displays incomplete data
    1024105: Maintenance Optimizer: two "Cancel" buttons
    1025381: Maintenance Optimizer: Link to additional download files
    1029453: Maintenance Optimizer - Wrong status displayed
    1030405: Maintenance Optimizer: Browser opens in background
    1030498: Maintenance Optimizer - IBase is not active
    1032463: Maintenance Optimizer: Internet Explorer Script Error
    1042704: Maintenance Optimizer: Display only employee partners
    Partner Scenario SOLMAN4.0 Only
    Os note 1021275 ( RFC Destinations ) N/A ST 400 11
    Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
    Relevant for ST400 SP09 ( N/A ST 400 11 )
    User:
    To setup you must have SAP_ALL
    General Users: ( Oss note 1032322 )
    Must be assigned to role SAP_MAINT_OPT_ADMIN
    Auth Object: D_SOL_VSBL ( visibility of solutions)
    Auth Object: CRM_ORD_PR ( for CRM stuff )
    /spro
    As of Support Package level ST 400 SP10:
    Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
    This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
    N/A as of ST400 SP11
    Define a Solution:
    Solution_Manager – Select Solution Overview – New.
    Enter Descriptive Name ( Ex. GTS Landscape )
    Hit Continue
    Select Solution Landscape Maintenance
    Select System Groups & Logical Components on the Left hand Side
    Select Solution Landscapes and pick the one you created
    Define the solutions for that landscape
    Highlight each item and click Logical Component (You must have a valid license to set this up)
    Assign S-User
    Transaction: AISUSER
    Enter you user id and your SUSER ID for downloading
    Create another SAPOSS Connection called SAP-OSS with S-User assigned
    Call SOLUTION_MANAGER
    Select Solution Overview
    Select the solution you want to work with
    Select – Change Management – Support Package Stacks
    Click Maintenance Optimizer around middle of screen
    Select the solution you want to get Sp’s for
    Go to OSS and add the files to download basket
    When done return to screen and hit continue
    Select - Confirm files in Download Basket
    Error message comes if your sap user and your oss user are not setup in AISUSER screen
    Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed – of course using the same S-User id you just added them to the basket with
    Apply support packages via spam per normal process
    Return to the SOLUTION_MANAGER window select the landscape you are working on
    Hit Maintenance Optimizer List
    Choose the maintenance transaction you are working on
    You will see a list of the confirmed and downloaded sp’s you selected
    Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
    This completes this activity
    If you wish to do more work you will have to create a new transaction.
    [Edit section] Add A New Instance to Maintenance Optimizer
    Sign into Solution Manager
    Ensure new instance has valid license installed and logical clients assigned
    Select Landscape Components
    Right Click Systems
         Select Create new system with assistant
    Enter
    SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
    Next enter Sys # & MEssgae Server and hit continue
    Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
    I always get a problem saving since SLD is not setup – ignore and continue
    Highlight the system you just added under Systems – SAP Global Trade Services –
    Select Assignment to Logical Components
    Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
    Highlight the system you wish to update under Systems and hit change
         Select Header Data
         Click Installed Product Versions
         In the product box add whatever you require for this system
         Select the version from the 2nd box and hit copy
    Ex. 
    If you cannot setup the trusted system here is a workaround:
    Create User in Target for Trusted System RFC from SM1
         User:      <Username>
         Pass:   <Pass>
         Type: Communication
    Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
    Generate RFC’s and ensure SMSY setup is done for SID in Solution manager
    Now Create a New Solution For your instance:
    Go to SOLUTION_MANAGER transaction
         Select NEW
         Give Descriptive name: ex. GTS Landscape
    Under Solution Landscape
         Select Solution Landscape Maintenance
         Select System Groups and Logical Components Tab
              Open Solution Landscapes
                   Select the one you just defined (GTS Landscape)
    SOLTION_MANAGER
    Select Change Management – Support Package Stacks
    Select Maintenance Optimizer
    Select the Product Version
         GTS 7.1
    Select the System Type – SID
    From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
    It will ask you to confirm the basket, once you do that you install them normally.
    Download with sap download manager, ftp and apply

  • BI Installer issue with message" Error: ABAP Backend doesn't exist in SLD

    Dear All
    Please help me to solve this issue, during the BI Installer the process get errors message
    "Error: ABAP Backend doesn't exist in SLD"
    Follwoing the oss Note 983156 - BI configuration w. Template Installer
    1.Logon to the SLD: http://<host>:<port>/sld. (Your configured SLD (central or local SLD))
    Please check in Home -> Technical Systems -> select type ABAP. This
    should have configuration of your ABAP (BI) system. yes the system already there.
    2, goto http://host:port/index.html ->Web Dynpro ->Content Administrator-> Check SLD Connection
    the connection is running well.
    Please any one can help me to solve this issue,
    Thanks and Best Regards,
    Chrisna

    Hi
    I found your question because I wanted the answer to it too.  I'm trying to connect my Java-only stack portal to my ABAP-only stack BI system using the template in NWA.  I get through all the steps up to the creation of the WebDynpro JCO RFC destinations then it fails saying "ABAP Backend doesn't exist in the SLD". 
    I've checked the SLD and the ABAP backend most definitely DOES exist in the SLD and the SLD is being updated by both the ABAP backend and the Java portal systems thus proving a valid connection exists between the SLD and both systems I'm trying to connect.
    I think I've solved it however.
    I always define a TCP alias equal to the SID for any SAP system I build and I try to make all connections to <sid>.<fully.qualified.domain.name>.  This separates, to a degree, the physical server from the SAP instance.
    I used this alias in the BI installation template but I noticed that the ABAP backend was listed as <SID> <hostname> in the SLD (not <SID> <sid alias>).  When I used the real hostname in the template it ran to completion.
    The other change I made, and it's possible that this was the real reason instead of the alias/hostname issue, was that I restarted the BI system before retrying.  I only did this because I was getting error messages saying there were too many active CPIC conversations and I couldn't find them to kill them off.
    Hope one or other of these things might help.
    Murray

  • How to change a status profile from existing in CRM 7.0?

    Hi,
    This is the scenario for which I need to change the existing status profile :
    We are using categories such as Maintenance , Approvals etc.
    There is a huge list of options which comes when we choose the category. We have assigned a status profile to each of these categories.
    So for e,g when I choose Maintenance, it also displays other options not related to Maintenance.
    Q 1) how to I change the status profile on this??
    I tried using CRM_STATUS_PROFILE_CHANGE but it doesnot work
         CALL FUNCTION 'CRM_STATUS_PROFILE_CHANGE'
      EXPORTING
        OBJNR                          = iv_guid
        STSMA                          = 'ZV001'
      XNOAUTO                        =
      X_NOACTIVITY                   = ' '
    EXCEPTIONS
       OBJECT_NOT_FOUND               = 1
       NO_STSMA_CHANGE_POSSIBLE       = 2
       STSMA_NOT_FOUND                = 3
       ERROR_OCCURRED                 = 4
       OTHERS                         = 5
    Q 2) If the above is not the right way is there a possibilty to hide the statuses ??
    Thanks and Regards,
    Narayani

    Hi,
    I am not so clear about your requirement, would you please try to make it clearer.
    Which transactions are you assigning the status profile to?
    And what is the "categories" do you mean? As I could guess it is the item within the status profile, isn't it?
    For example you have a status profile defined as
    10 xx01
    20 xx02
    30 Maintenance
    40 xx03
    50 Approvals
    60 xx04
    Is it like the above? Or else, please clarify.
    Thanks,
    Hongyan

Maybe you are looking for