Maintenance plance with several cycles

hello all
I have a maintenance plan containing several cycles: the most importants are 1 year 6 years and 12 years.
Closing date of an order of any cycle, influences the starting dates of the others.
Meaning: if I close the 6 years 6 moths later, the 12 years is going to have the starting date pushed off for 6 month.
we want to avoid this: we would like the closure of the order not to influence the opening of the next.
apparently there is a user exit that allowas that??
or any other idea?
thank you
Alisa

Here are the two things:
1) if you put the value of all the parameters to zero , the next call date will not be shifted . means if 6 years cycle is delayed by 6 months , the 12 year cycle will call object on the plan date , No shifting will be there for 6 months or so. . So one of your problem will be solved.
2) And if you want to put the completion requirment tick thats ok.
System will not flooded with orders as the orders will come which are planned and that much numbers of orders are expected when you configure the system.
you can put the completion requirement tick and put the values to zero. So order will only be created when last order is TECO and also the dates will not be shifted as per the shift factor.

Similar Messages

Maintenance Planning with Cycles of Different Dimensions

Hello All,
I am having trouble finding the solution for the following requirement in PLM310 "Maintenance Planning with Cycles of Different Dimensions": I am having trouble creating a maintenance strategy that can handle both time and measurement.
SImple version of the requirement: perform car maintenance every three months OR 3000 miles, whichever comes first.
I can see where SAP can handle multiple counters, but where I can mix time and performance measurements.
Thank you all for your help in advance.
Alex

Hi,
You can achive this in two ways.
1. If you have strategy only as you mentioned 3Months or 3000 miles then you can use T code IP43 Multiple counterplan.
2. Is you create cycle sets in IP11Z tcode and use them as like strategy. In this typr you can maintain different UOM.
Regards,
N.Nagaraju

Relase strategy characteristic with several material groups

Dear Experts,
Actually I'm implementing the MM Module, 6.00 version and I have the following issue:
I created the release strategy Purchase Order, with these characteristics:
- Material group
- Net total purchase order
- Plant
The error consists in the Material Group characteristic don't run with several Material Groups. It seems that it could be possible only with one Material Group.
If you know how I could work the characteristics with several material groups, pleas tell me.
Thanks in Advance,
Adriana Corredor
MM SAP Consultant

Hello, Adriana,
it isn't clear what you mean by "characteristic don't run with several Material Groups":
- is it that you cannot enter multiple values in classification? Then check whether you chosed "Multiple Values" in "Value assignment" subscreen of characteristics maintenance, transaction CT04;
- is it that your release strategy isn't assigned to PREQ with several items with different MATKL values? It is neccessary to realize that if you use the coverall release of PREQ (which I guess you are using), the values of items has to be "summarized" (for purpose of release strategy assignment) into structure CEBAN "Communication Release Strategy Determination: Requisition"; the release strategy classification are then evaluated against this structure; if there is any field which differs for items, it is passed to structure CEBAN as empty; so either you have to have release strategy with MATKL empty, or you can modify the CEBAN content by enhancement M06B0001 "Changes to communication structure for release of requisitions", or you can prevent creation of PREQ with certain not-allowed combination of MATKL via user-exit or badi;
Kind Regards
TomT

Is it possible to 'Load Up' the cursor with several 'Place' items?

It happens often enough that I have a folder with several items I want to place. I can go back and forth individually and command D to the folder window choose the next item and then place in the document. When there are page after page of items, it would be handy to be able to select several items that will go on one page and then 'spit them out' so to speak, from the cursor by repeated clicks, machine-gun style. Is this possible to do?
TIA,
Ken

Absolutely. Select them all. If they aren't in the correct order when you go to place, use the arrow keys to cycle through, and the Esc key to cancel an object.

Maintenance Plan with Counter

Dear All,
I have the following requirement, would be of great help if you can help me get the solution:
Their is a pump which is to be maintained. The orders need to be generated on the basis of two parameters:
1. Number of hours the pump has ran. This can be recorded against measuring point.
2. Number of calendar days elapsed.
The maintenance order should be created which ever condition is met first. For example: Every 200 hrs the pump runs, a maintenance order should be created also if the time elapsed is 2 months the order should be created. Now whatever of the above two comes first the order should be created against that only.
Can anyone please tell how to achieve this.
I have thought of two options though they dont look good:
Option 1: Create two maintenance plan. Delete/TECO the extra order generated.
Option 2: Create one maintenance plan with multiple counters, one for running hours and the other for calendar days. Keep OR relation. But here we need to update calendar days counter every day which is not feasible.
Thanks
Geravine

Hi...
First of all you have to create the Measuring Counter for your Pump using the T.code IK01 and then post the initial measurement document against the measuring counter using T.code IK11.
After above create the Cycle set for Multiple counter using T.Code IP11Z, and define the Cycle for your Multiple Counter Plan.
In your condition, define the cycle length as "2" and UOM as "MON" and second cycle length as "200" and UOM as "HRS" and also provide the short text for Cycle short text as per you convenience. This is one time activity.
Then create the Multiple counter Plan using the T.Code IP43 and cycle set created in earlier step. Provide the Technical Object i.e. Pump (Most probably Equipment) all other details are copied from it. Enter the created Measuring Counter for your Technical Object in the Maintenance Plan Cycle Tab against the 200 Hrs Row in Counter Columns. In the Second Tab i.e. Maintenance Plan scheduling parameter Choose "OR" Link . Enter the value Scheduling Period which help you to show the future plan in advance.
And as per requirement you can also check the box available for Completion Requirement, Check the box if you required that New Maintenance Order will not be generate until the previous order is get closed.
Hope this will resolve your query

How can I create Droplets using Actions with several Stops?

My Droplets (using Actions but with several Stops) work very nicely when using a single image source. However when using multiple images thing start to go crazy.
At the first stop on the first image a pop-up emerges asking me to continue to the next image or stop. If I select stop I can continue with the Action for this first image and complete the Action on that first photo.
If I select continue it halts the action on that photo at the first stop then opens the 2nd image and repeats the action to the first stop on the next photo then the pop-up appears again and the cycle repeats.
How can I create Droplets using Actions with several Stops?

I don't believe this is possible when starting from Java. I think you need to start with a WSDL to get this to work. I am curious as to why having multiple WSDLs is an issue, would you care to eloborate.
Thanks

Print a JTable with several Header and Footers

Hi everybody,
my name is Lothar and I come from Germany. My english is not very well, but I hope you understand me an my problem.
I want to print a JTable, but I want to print a header with several headers and footers.
For example:
h3. Header
h5. 1. Subtitle
h5. 2. Subtitle
Table
h5. 3. Subtitle
h5. Footer
But, I do not know how I can do that. Can anybody tell me, how I can solve my problem. Please, explain for a newbie because I have learned Java since two months ;)
Here the code:
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.util.Date;
import javax.swing.*;
public class Beispiel extends JFrame implements ActionListener {
    private JTable table;
    public static void main(String[] args) {
        Beispiel tl = new Beispiel();
        tl.setVisible(true);
        tl.pack();
    public Beispiel() {
        setLayout(new BorderLayout());
        // DruckButton
        JButton print = new JButton("Print");
        add(print, BorderLayout.SOUTH);
        print.addActionListener(this);
        // Tabelle
        add(new JScrollPane(createTable()), BorderLayout.CENTER);
        // schließt das Frame
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    public JTable createTable() {
        // titel
        String[] title = new String[] { "Datum", "Von", "Bis",
                "Dauerinsgesamt", "Bemerkung" };
        // daten
        String[][] data = new String[][] { { "", "", "", "", "" },
        table = new JTable(data, title);
        table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
        return table;
    public void actionPerformed(ActionEvent e1) {
        MessageFormat header = new MessageFormat("Header");
        MessageFormat footer = new MessageFormat("Footer");
        try {
            table.print(JTable.PrintMode.FIT_WIDTH, header, footer);
        } catch (Exception e2) {
            System.err.format("Cannot print %s%n", e2.getMessage());
}

Nobody?
Can nobody solve my problem?

When I click on the - fire fox disappears from the task bar; it is still open but gone from the task bar, if I click on any icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

Question
When I click on the - to minimize fire fox, it does not close the window but the firefox icon disappears from the task bar; it is still open but gone from the task bar, if I click on any other icon it opens a new Firefox window, I end up with several windows open but none on the task bar.

Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

When initiating an e mail to someone with several addresses used in the past the one I use most often does not come up in the first position. How can I get these multiple e mails prioritized?

We are talking about the Mail app, right? In the Mail menubar, click on Window and then Previous Recipients:
That eliminates the previous recipients. If you are talking about the suggestions because there are 10 people with the name 'Steve' in your Contacts, then I do not know how to eliminate those unless you change the name slightly or wait until you type the last name or some other differentiator.

Sharing Itunes Library with several users on the same computer

Hi,
I'm trying to share the iTunes library on a SP2 system. I placed the Itunes folder on a partition and setted iTunes to use this folder in each user account but...
When one add musics to the library, thoses musics are not visible once switched to another user account.
How to really share the same library with several user accounts one the same machine ?
Thanks

Note that Otto42's post is from March 2006. This is way before iTunes 7, which allows you to move the iTunes folder.
His steps will work but are much too involved and unneeded.
Rather than using TweakUI (and possibly messing up something), just move the entire iTunes folder to a shared directory and hold Shift when starting iTunes, then select Choose library and go to the iTunes folder.
All changes made by any user will be to all users.
Note that only one user at a time will be able to access iTunes.

Maintenance view with MARA joined twice

Hello,
I have a Z table which contains 2 fields containing material number, say: MATNR_1 and MATNR_2. Both have foreign keys pointing to MARA table.
Now I'd like to create a maintenance view for that Z table which will contain texts for both of those matnr fields, taken from MAKT table. So I need a maintenance view which has that Z table as the main table of the view and MARA+MAKT tables joined twice: first for the field MATNR_1 and next for field MATNR_2.
It looks like it is impossible to achieve by just clicking in SE11 - the system takes only the first matnr field into account (MATNR_1) and joining MARA for the second time (for field MATNR_2) seems not possible.
Has anyone an idea how to achieve this ?

I found a solution myself - actually a workaround, here it is if someone is interested:
You can have data from a secondary table (a table that you cannot join by defining the view) filled "manually" at the screen level. When you generate a maintenance objects with the maintenance generator, modify the generated screen by adding a new field to it (for data that you need to be displayed). In PBO of that screen call your additional PBO module which just reads the data from the db table (or from anywhere you want) and fills that field.
You can check standard transaction FI12 to have an example: field BNKA-BANKA is filled exactly with this technique (see PBO of that screen).

Maintenance View with Subset Fields

Hi All,
I have created a maintenance view based on a single DB table. Two key fields are defined to be as subset fields. No selection conditions are added to the view. I have used table maintenance genrator to define the screen (one step) along with the events.
In SM30, i get the popup to fill the subset fields.
I have created an event for AA (to replace default read). I am filling total attribute here.
a) Is there some other attribute that i need to fill apart from total?
I receive following dump
" Exception condition "NO_VALUE_FOR_SUBSET_IDENT" is raised"
When i set <status>-sbsid_rcvd = 'R' in read routine along with total, then the above exception doesn't appear.
But filtering based on the subset values doesn't happen automatically.
b) I also need have to have routines to perform insert, copy and validation.
c) Would the contents displayed be automatically filtered based on the subset values or we need to process this in user routines for read and so on?
As i find very limited documentation available for maintenance views with subset fields, could you suggest me some example to do the above?
Thanks in Advance,
Regards,
Rekha

Hello Rekha,
Yes I've same idea, documentation for maintenance screens is inadequate.
But there is way to find examples for all events,
table TVIMF is storing the Table name - Event - Form name columns.
For example when u want to do something about "creating a new entry"
Just go se11 > Table maintenance generator and find related event : 05
- Then go to TVIMF and display a record for event = 05
- than go to function group of maintenance screen of the TABLE in that record
- find the subroutine form ( TVIMF-FORMNAME) in that function group
This is a working example for that event, try or copy & use.
I hope it helps you for the coding for all the events.
Bulent
Edited by: Bulent Balci on Aug 5, 2010 11:28 PM
Edited by: Bulent Balci on Aug 5, 2010 11:29 PM

I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store.

I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store. I have already had to have a technician to look at it and really couldn't figure out what the deal was. I was told that the APP store software should give me no problems but the truth is that it locks up on the software. This machine is only 4 weeks old and I am using 37 g on a 1 T hard drive. There is no reason for it to be locking up. Also, when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that. I successfully used the help program on my pc lots of times. I did not need a $2000. plus machine to just get email. I just wanted to unload on somebody that might understand my pain and after checking out this site...I think there is a few of you out there.

I was told that the APP store software should give me no problems but the truth is that it locks up on the software.
The apps downloaded from the Mac App Store are written by third party developers, not Apple. If you have problems with those apps you need to visit the support area for their websites. Launch the App Store, locate the app name. You should see a support link.
when I try to use the help program, it always tells me that I am not connected to the internet even though I have used both the mail program and the browser with no problem just before that
Go to ~/Library/Preferences. Move the com.apple.helpviewer.plist file from the Preferences folder to the Trash. Restart your Mac, try the Help menu.
If you need help finding that file, hold down the Finder icon in the Dock then click: New Finder Window. From the menu bar top of your screen click: Go > Go to Folder. Type this in exactly as you see it here: ~/Library/Preferences/com.apple.helpviewer.plist That will take you right to that file.
(.plist) files stores information about a particular app or in this case, the Help viewer. Often times deleting the .plist file resolves the issue.
It's fine to "unload"... we understand that you expect your iMac to be stable but there are times when things go awry. That's why we have these forums so that you can you get help.
You may want to read up on how to repair the disk if necessary or reintsall Lion > OS X Lion: About Lion Recovery
Apple - Find Out How - Mac Basics
How to "switch" from PC to Mac > Apple - Support - Switch 101
I'm sorry you feel, "ripped off", but you are using the world's most advanced operating system and it may take some time to adjust to a new OS. http://developer.apple.com/technologies/mac/

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

I am on a shared computer with several profiles. I had to delete my profile and create a new one. Now, my question. It transferred to Purchased Items to the new iTunes, so how do I get the rest of the songs to transfer to new iTunes?

It sounds like you might have broken links to your content. Either repair these by putting the files you've recovered where iTunes expects to find them or delete the broken entries then go to iTunes Store > Purchased > Music > Not on This Computer, and click the download links.
If you have an Apple device see also Recover your iTunes library from your iPod or iOS device.
tt2

In a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

in a document with several sections, in section VIII and IX one cannot select the text of the page foot nor set the pointer in it; so, one cannot write nor change the page foot text. Please help!

Question already asked and answered several times.
It's a bug striking in long documents.
Select a word somewhere higher in the page then use the arrows to reach the wanted insertion point.
Yvan KOENIG (VALLAURIS, France) mardi 23 août 2011 15:44:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Maintenance plance with several cycles

Similar Messages

Maybe you are looking for