Maintenance view on the standard table

Hi,
We need to have a maintenance view on the standard XYZ table .
Since it is a std table. we would not be able to create a maintenance view since we need an access key.
So we have to :
1. Copy the table XYZ into a Z_table. (just the structure alone).
2. Create a table maintenance generator on this table.
3. When the data is being saved in the maintenance view, update the record in the XYZ.
How we can populate the XYZ when the Z_table is populated with data?
Can anyone help in this regard.
Thanks and regards,
Kapil

Hi Rich,
Thanks for your reply.
I am referring to standard table "comc_settyp_attr" in SAP-CRM system . I have copied it and created a z_table. But its not allowing me to create a maintainance view. Its giving an error :
GUID in table key (Field name CUSTINFO) not supported.
But when i create the z_table without the GUID(char 32) as key field, it generates table maintenance. But the key field is required.
Can you help me in this regard.
Regards,
Kapil

Similar Messages

Reg :-maintain a table maintenance view for the z table.suggest me the code

i have question.i have created a z table related to pp module.the requirement is to maintain {table maintenance view} for this z table.how could this be done.can any one suggest me the code for this?

Hi ,
We have a lots of queries on table maintainance creation in the forum posted and replied to.Pls have a look at it first.
In se11 -> change mode of the ztable -> goto -> utilities -> table maintainance generator -> click on it...
it will give a new screen-> enter the required details like function group , authorisation(use &NC& or leave it blank if you dont know) and screens
2 step and 1 step means=> number of screens displayed in maintainace
if step1 is selected then we have a screen which will be like a table control for data entry.........
for step2 we have a table control screen and a more detailed individual field display as second screen
click on the button 'find screen numbers' so that system automatically proposes the screen numbers
after which click on the "create" button and follow the required instructions/messages
once done go to SM30 enter the table name to check if maintainance has been created properly
Hope it helps,Pls check and revert
Regards
Byju

Maintenance view program for a table

Hi All,
How can i create a maintenance view program for a table. i did maintenance view in sm30 for that table. now it needs a transaction code for maintenance. can somebody help me with this.
Thanks,
Kiran

Hi
Create a new transaction Z**** linked to SM30 for that table:
- trx SE93: while creating trx choose transaction with parameter and insert these data:
- TRANSACTION = SM30
- set the flag SKIP INITIAL SCREEN
At the end of screen, section Default Value, if you want to open dialog for updating:
NAME OF SCREEN FIELD VALUE
VIEWNAME <here insert the table name>
UPDATE X
...for displaying:
NAME OF SCREEN FIELD VALUE
VIEWNAME <here insert the table name>
SHOW X
Max

Wht r the standard tables for vendor customer and sales order report/

Hi wht r the standard tables for vendor and customer reports and is how in normal we cannot use them for vendor reporting and etc ?

Hi
Customer is related to Sales Module
So for a customer we fetch the reports of Sales orders , Deliveries and Billing doc's
CUstomer and Vendor related tables with important fields:
KNA1: Customer Master-General(KUNNR,NAME1,LAND1)
KNB1: Customer Master(Company Code)(KUNNR,BUKRS,PERNR)
KNC1: Customer Master Data (Transaction Figures)(KUNNR,BUKRS,GJAHR)
KNVK: Customer Master Contact Partner(PARNR,KUNNR,NAME1)
KNVV: Customer Master sales data(KUNNR,VKORG,VTWEG,KDGRP)
KNBK: Customer Bank Details(KUNNR,BANKS,BANKL,BANKN)
KNVH: Customer Hierarchy (HITYP,KUNNR,VKORG,VTWEG,SPART)
KNVP: Customer Master Partner Functions(KUNNR,PARVW,KUNN2)
KNVS: Customer Shipment data(KUNNR,VSTEL,TRANS)
KNVI: Customer Tax data(KUNNR,ALAND,TATYP)
LFA1: Vendor Master-General (LIFNR,NAME1,ORT01)
LFB1: Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
LFC1: Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
Sales related Tables for a customer
VBAK: Sales Document(Header Data) (VBELN, KUNNR)
VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
      Enquiry, Quotation, Sales Order are differentiated based on Doc.
      Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
      for Quotation 'B' & for Order it is 'C'.)
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
      (LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK: Shipment Table (Header Data)(TKNUM)
VTTP: Shipment Table (Item Data)( TKNUM,TPNUM,VBELN)
      (VTTP-VBELN = LIKP-VBELN)
VTFA: Shipping Document Flow(TKNUM,VBELV,VBELN)
VTPA: Shipping Partners data(VBELN,PARVW,KUNNR,PERNR)
VTTS: Stages in Shipment(TKNUM,TSNUM,TSTYP)
VTSP: Transport Stage/Shipment Item Allocation(TKNUM,TSNUM,TPNUM)
VEKP: Handling Unit: Header(Packing)(VENUM,VSTEL)
VEPO: Handling Unit: Item (Packing)(VENUM,VEPOS,VBELN)
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
      (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
      Apart from these tables there are lot of other tables which starts with
      V, but we use the following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header)(VBELN,VBTYP)
      VBTYP= C(Sales Order) VBTYP=J(Delivery) VBTYP=M(Invoice)
VBUP: Sales Documents status & Admn. Data(Item)(VBELN,POSNR)
VBEP: Sales Doc. Schedule Lines Data(VBELN,POSNR,EDATU,WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN,ZTERM)
VBFA: sales document flow data(VBELV,VBELN,POSNV,VBTYP)
VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
VEDA: Contract Data(VBELN,VPOSN)
VEDAPO: Contract Data(VBELN,VPOSN)
Vendor related MM tables
EBAN-- Pur.Reqn. Data (BANFN,BNFPO,BADAT,MATNR)
EBKN-- Purchase Requisition Account Assignment(BANFN,BNFPO,VBELN)
EINA- Purchase Info.Record (General Data)(INFNR,MATNR,LIFNR)
EINE-- Purchase Info.Record (Pur.Orgn Data )(INFNR,EKORG)
ELBK-- Vendor Evaluation Header Data(LIFNR,EKORG,KLASS)
EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
       RFQ and PO are differentiated by Doc Type(BSTYP)in EKKO table.
       For RFQ it is A and for PO it is F.
MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
       Apart from this there are lot of tables which begin with 'M'& 'E', but we
       use the following very often.
EKBE--PO History Data (EBELN,EBELP,BELNR,BLDAT,MATNR,VGABE)
EKBZ--PO History with delivery Costs(EBELN,BELNR,LIFNR,XBLNR)
EKET--Schedule lines data of a PO (EBELN,EINDT,SLFDT)
EKES--Vendor Confirmations Data(EBELN,EBTYP,EINDT,XBLNR)
Reward points if useful
Regards
Anji

How to add field value to the standard table

Hi,
How to add field value to the standard table?
for example:
when we go to TCODE SE16-> VBAK table -> on the selection screen if we press F4 against VBTYP we get all the available values for that field. How to add a new document Category value to this field so that it shows up in F4 help for that field.

Hi Asif,
I don't think it is possible and feasible for adding new field value to the field VBTYP because it is not possible through SPRO.
If u see the domain of this field VBTYP we have fixed values provided by SAP. There is no value table for this. If u have value table then it will be updated through SPRO. But still if u really want to add some value u can do that by getting access key and add the value in the fixed values of the domain. But of no use other than simply displaying in F4. Because for what ever value u created here there will be no documents in VBAK or any table using this domain.
Hope this is clear for u.
Thanks,
Vinod.

How to modify the standard table

plzzzzz answer my qestion.
how to modify the standard table?
in my knowedge we have the accese key is it correct or worng

Hi
The system asks for access key only of two reasons:
1) You may be having problem of access rights. You would have to contact basis peopl.
2) You may try to name an object not complying with the rules. You may have to check with the same.
the process of getting access key is
the steps to get access key
you can also try via transaction OSS1
In your Inbox, click on 'Registration', then on 'Register Objects', then you will have to choose your installation and give details about your object.
The details you can get by going to your object and clicking on 'Change' - the pop-up screen which asks you for the access key gives you all the details you need to fill in on OSS1 to get your key.
or
U can get Access key from www.service.sap.com
After getting into the site,select quicklinks, then click s to goto SSCR, in
that select registration,
after giving the proper details, u can get the access key
or
on sap support portal (sapnet)
--> key & request
---> register SSCR key
---> registration
---> register developper
and then choose your rigth installation number
you can get the access key in this way
reward if usefull

What are the standard tables for plant maintenance in r/3

I need the list of standard tables for plant maintenance in r/3. and also
is there any way we can find the field name and table which it belongs to in r/3, based on the description of the field.

I NEED THE FIELD NAMES FOR FOLLOWING FIELDS AND CORRESPONDING TABLE NAMES
Equipment status
registration number
insurance type
insurance type description
registration date
expiry date
insurance companies
expiry date
policy number
amount insured
premium paid
created by ..so ..on
for our report in PM .. insurance data report
THANKS

How to validate enries in Maintenance Views with the help of Events?

Hello,
I have a Maint. View. I would like to apply a validation for a specific field of the table. And if there is an entry which is not proper, than I'd need an error message to be issue, and the fields should be open for correction.
I know this should be managed by Events. I tried many of them, but there was allways some different kind of issuses. E.g. When I used Event 21, the problem was that: table "total" was not updated with the values I entered, when the Event triggered. More over, when I ussed a simple error message, that appeared on the screen, but when I hit Enter, I got an infinite LOOP, cause Event 21 was again triggered.
When I tried Event 01, the total table was already updated. But with the program went back to the sceen from where I called the maintenance of the table. And Issues the error message there. When I hit Enter it took me back to maintenance screen. But this is not very nice.
A bunch of hints would make me very happy, or a good example, which is priceless!
Thanks and regards,
Gyula

Hi priyaranjan,
Check the data in debug mode whether the record_tab is getting filled or not. If it is not filled use FM 'F4UT_RESULTS_MAP' to fill the data.
Refer the link F4UT_RESULTS_MAP Standard Search Help Exit for Filling Hit List - Function - ABAP - SAP to know how to use FM.
Once You get result from FM in to record_tab then sort the table as per your requirement.
Regards,
Ravikiran.K

How to Extract Data for a Maintenance View, Structure and Cluster Table

I want to develop 3 Reports
1) in First Report
it consists only two Fields.
Table name : V_001_B
Field Name1: BUKRS
Table name : V_001_B
Field Name2: BUTXT
V_001_B is a Maintenance View
For this one I don't Find any Datasource
For this Maintenance View, How to Extract the Data.
2)
For the 2nd Report also it consists Two Fields
Table name : CSKSZ
Field Name1: KOSTL (cost center)
Table name : CSKSZ
Field Name2: KLTXT (Description)
CSKSZ is a Structure
For this one I don't Find any Datasource
For this Structure How to Extract the Data
3)
For the 3rd Report
in this Report all Fields are belonging to a Table BSEG
BSEG is a Cluster Table
For this one also I can't Find any Datasource,
I find very Few Objects in the Datasource.
For this One, How to Extract the Data.
Please provide me step by step procedure.
Thanks
Priya

Hi sachin,
I don't get your point can you Explain me Briefly.
I have two Fields for the 1st Report
BUKRS
BUTXT
In the 2nd Report
KOSTL
KLTXT
If I use 0COSTCENTER_TEXT Data Source
I will get KOSTL Field only
what about KLTXT
Thanks
Priya

Can we create a view involving a standard table and a ZTable ?

Hi,
I created a view based on 2 tables : EKKO and a Ztable having EBELN field in common.
Now, when i try to create a PO in ME21N , this view should get updated.But,It doesn't happen so.
So i want to confirm that is it not possible to create a view on a Ztable...
Also can anyone suggest any other option to do so...

Hi,
Yes you can create a view using a standard view using a standard Data base table and a custom data base table. But this getting updated would not be done by the standard program of Tcode ME21N, I reckon you need to write the logic of updation in an enhancement.
Regards,
Murthy.

How to create XMLTYPE View from the XMLType table

Hi:
I have a large XML file and inserted to the XMLTYPE table
For the XQUERY purpose I would like to create XMLView of the table.
The examples I got from Oracle to create XML view are for small files.
Can some one help me how to create XMLType VIEW for large XML Files ( 20,000 lines )?
Ali_2

Have a look at the examples given on XMLType Views (based on relational tables) or standard views (based on XMLType storage) in the FAQ url located on the main page of this forum site regarding XMLDB.

Why is my keynote crashing when i try to view in the light table?

My Keynote presentation crashes when I try to view it in the light table view, and the whole system has to be restarted. The file is not huge, only 54 slides, mostly graphics and video plus a little bit of text. It is under 1GB in size, which I can usually manage without issue. Has anyone else encountered this problem? Does anyone know of a solution or a workaround? I'd be so grateful for any help. Thanks!

Try this maintenance routine which has solved quite a few issues:
1
Close all applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
go to; Applications > Utilities > Disc Utility > First Aid > Repair Disc Permissions
when this is completed restart the Mac normally
6
Reinstall Keynote using the original discs or logging into the Mac App Store and installing from there.
Post back to let others know if this helped

Can Numbers Display Multiple Views of the Same Table

Hi,
Excel and Appleworks both have a pull down tab on the vertical bar allowing multiple views into the same spreadsheet (table). Can Numbers do this?
I have a set of calculations at the top of a spreadsheet that are based on years and years worth of data under the calculations (same column). I add data for each new event (the rows) and watch the calculations at the top of the data. Easy to do in Excel or Appleworks, but, I can't figure out how to do this in Numbers.
Example:
Spot1 Spot2
Total 15 36
Avg 5 12
Jan 09 5 10
Feb 09 6 20
Mar 09 4 6
Apr 09
So... does Numbers allow the view "split" or multiple views that Excel and Appleworks allow?
Thanks!
Tom

Question asked and responded several times:
feature unavailable.
For multiple views of a table there is an easy workaround as we may build a table whose every cells grab their contents from the 'master' one.
_Go to "Provide Numbers Feedback" in the "Numbers" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'10
Yvan KOENIG (VALLAURIS, France) mardi 1 septembre 2009 21:56:42

Sub: How to update value of a single filed in the standard table without u

Hi experts,
In the standard webdynpro component , i want to change particular field value based on some condition. I cannot use bind table to update the single value, because other filed attributes are getting cleared .so is there any way to update only particular row related field value. Please let me know. This is very urgent. Please post if you have any idea.

Srinivasu Y wrote:
> I cannot use bind table to update the single value, because other filed attributes are getting cleared .so is there any way to update only particular.
Hi,
It is clearing because you are just updating only that particular field direclty.,
instead First You read the selected Row using get_static_attributes( ls_tab ) method .
no in ls_tab modify your required field and then rebind it .
hope this clears your doubt.,
Thanks & Regards,
Kiran

How to insert values in the standard table

Hi Experts,
I have a Standard table ( Info structure ), its called S551. It having 20 fields, Now i want to insert some 1000 records inthat table from Excel sheet, can any one plz help this.
If i tried in se11, with create entries option its not allowing to insert the values manually inthat table.
Plz help this. Point will be sure.
Mohana

Hi Mohana,
U can't insert the records directly in to the standard data base table. Also it is not advisable. It is always better to use BAPI/BDC to upload mass data.
I advise to write a small program for this.
Upload the excell file to internal table which is having same structure of S551.
use FMs TEXT_CONVERT_XLS_TO_SAP or GUI_UPLOAD for uploading data from excell to internal table.
INSERT/MODIFY S551 FROM itab.
Make sure that ur excell file structure and internal table structure matches and
U have values for all the primary keys of the table and don't have duplicates(primary key).
Thanks,
Vinod.

Maintenance view on the standard table

Similar Messages

Maybe you are looking for