Major delay in audio for notifications causing no sound.
Major delay in audio for notifications causing no sound. Email text and app notification sounds are so quick thT with the new ios4 update there is now a delay in audio to the Bluetooth so I don't know when I get one. Phone ringer works fine and so does iPod and games. Anyway to fix this? I've tried resetting phone, turning device on befor phone and turning off Bluetooth and back on. Nothing seems to work to kill this delay in audio. Help!
Ails and texted
This also happens to me. I believe that since notification audio is now pushed to any A2DP-enabled bluetooth headset, and because of the fact that notification sounds are very short, most of the time the sounds fail to transfer to the headset, since the connection initialization takes a couple of seconds, way more than the duration of the sounds themselves.
This could only be dealt with if Apple would include a submenu to each paired bluetooth device that would allow the user to set WHICH kind of audio would go through the headset.
Similar Messages
-
1 way Outbound audio for 20 seconds ONLY to certain numbers...Puzzled
So I've got one that has me completely stumped and would love some ideas!
Basic Setup-
Lync Server 2013 with Stand alone Front end, and Dual honed Mediation server with External address on secondary Nic
Sip Trunk through Intelepeer
NO firewalls turned on servers, and none between Medation and Sip trunk Provider
Symptoms-
When dialing certain DID's the receiving caller can hear me but it's one way audio for 20 seconds, after 20 seconds audio works for both sides and directions. ONLY OUTGOING! Incoming works fine.
This only happens with certain DID's, with certain prefixes. Example I can call 3603843600 No problem, however when I call 3603893900 I'll get the delay.
This is happening both on different Area codes, and different prefixes.
Steps taken for Troubleshooting-
Different carriers, including Comcast, 2 local providers, Google voice and Intelepeer (it happens when I call there support!). I've gone through traces for good and bad calls trying to find a commonality and I'm just stumped.
I've checked routing and dial plans, all the same.
I'm going to redo and republish my trunk tonight for giggles, anyone have any other ideas?
Here's a couple logs for outgoing calls first Provider side-
Intelepeer Log
Next up- My mediation server (different phone number, same results) Bad call flow to
And Lastly, a call with Good call flow.
The only difference I can see is the second 183 Session progress, I'm not sure a) if that is making the difference and b) why the first one wouldn't be getting the same thing.
Anyone have any thoughts as to what could be causing this? More logs/traces/etc. available on request!
Thanks
-WayneI've seen it exactly as described, but with another provider that wasn't Lync certified. After 20 seconds almost exactly (seemed like 19.something seconds) it reset and both sides could hear each other.
What was happening was, in the RTP packets, we were receiving a BYE from the provider within 10ms. We could see it with WireShark on the Mediation server. The provider wouldn't acknowledge this as an issue, and the crazy workaround was to have
them send G.729 and we transcoded it back to G.711.
We were also able to make the issue disappear by turning on Media Bypass but chose not to go this route.
I wouldn't expect this to be an issue with Intellipeer, they're well known for Lync, but it wouldn't hurt to run WireShark and dig into those RTP packets to see if they're sending anything odd in the RTP or the wrong codec or something.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
Job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION canceled
Dear SAP Guru,
The BG job SM:SYNCHRONIZE USER DATA FOR NOTIFICATION is canceled every day and it´s
generating shortdump. Our system is SAP EHP1 for SAP Solution manager.
SAP ABA and SAP BASIS components are release 701 level 3.
ST is release 400 level 19
ST-PI is release 2008_1_700 level 1
ST-A/PI is release 01L_CRM570
Pls look on this shortdump.
Runtime Errors RAISE_EXCEPTION*
Date and Time 22.03.2010 06:50:11
|Short text |
| Exception condition "CUSTOMIZING_NOT_FOUND" raised. |
|What happened? |
| The current ABAP/4 program encountered an unexpected |
| situation. |
|What can you do? |
| Note down which actions and inputs caused the error. |
| |
| |
| To process the problem further, contact you SAP system |
| administrator. |
| |
| Using Transaction ST22 for ABAP Dump Analysis, you can look |
| at and manage termination messages, and you can also |
| keep them for a long time. |
|Error analysis |
| A RAISE statement in the program "SAPLDSWP_UTILITY" raised the exception |
| condition "CUSTOMIZING_NOT_FOUND". |
| Since the exception was not intercepted by a superior |
| program, processing was terminated. |
| |
| Short description of exception condition: |
| |
| |
| For detailed documentation of the exception condition, use |
| Transaction SE37 (Function Library). You can take the called |
| function module from the display of active calls. |
| - |
|How to correct the error |
| |
| If the error occures in a non-modified SAP program, you may be able to |
| find an interim solution in an SAP Note. |
| If you have access to SAP Notes, carry out a search with the following |
| keywords: |
| |
| "RAISE_EXCEPTION" " " |
| "SAPLDSWP_UTILITY" or "LDSWP_UTILITYU19" |
| "DSWP_GET_GLOBAL_CUSTOMIZING" |
| |
| or |
| |
| "SAPLDSWP_UTILITY" "CUSTOMIZING_NOT_FOUND" |
| |
| or |
| |
| "RDSWP_NM_SYNC_USER_DATA " "CUSTOMIZING_NOT_FOUND" |
| If you cannot solve the problem yourself and want to send an error |
| notification to SAP, include the following information: |
| |
*|
|System environment |
| SAP-Release 701 |
| |
| Application server... "crsgrant" |
| Network address...... "10.128.32.175" |
| Operating system..... "Windows NT" |
| Release.............. "5.2" |
| Hardware type........ "2x Intel 801686" |
| Character length.... 8 Bits |
| Pointer length....... 32 Bits |
| Work process number.. 13 |
| Shortdump setting.... "full" |
| |
| Database server... "CRSGRANT" |
| Database type..... "ORACLE" |
| Database name..... "SM1" |
| Database user ID.. "SAPSM1" |
| |
| Terminal.......... " " |
| |
| Char.set.... "Czech_Czech.28592" |
| |
| SAP kernel....... 701 |
| created (date)... "Apr 12 2009 22:43:15" |
| create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00" |
| Database version. "OCI_10201_SHARE (10.2.0.4.0) " |
| |
| Patch level. 39 |
| Patch text.. " " |
| |
| Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.." |
| SAP database version. 701 |
| Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows |
| NT 6.0" |
| |
| Memory consumption |
| Roll.... 8112 |
| EM...... 4181184 |
| Heap.... 0 |
| Page.... 24576 |
| MM Used. 873664 |
| MM Free. 170296 |
|User and Transaction |
| |
| Client.............. 001 |
| User................ "SOLMAN" |
| Language key........ "E" |
| Transaction......... " " |
| Transactions ID..... "C27635DF574FF121B0470050569757E9" |
| |
| Program............. "SAPLDSWP_UTILITY" |
| Screen.............. "SAPMSSY0 1000" |
| Screen line......... 6 |
|Information on where terminated |
| Termination occurred in the ABAP program "SAPLDSWP_UTILITY" - in |
| "DSWP_GET_GLOBAL_CUSTOMIZING". |
| The main program was "RDSWP_NM_SYNC_USER_DATA ". |
| |
| In the source code you have the termination point in line 22 |
| of the (Include) program "LDSWP_UTILITYU19". |
| The program "SAPLDSWP_UTILITY" was started as a background job. |
| Job Name....... "SM:SYNCHRONIZE USER DATA FOR NOT" |
| Job Initiator.. "SOLMAN" |
| Job Number..... 00104000 |
Have you some solution or advice?
Best Regards
JakubPlease could you check the following ?
- Please ensure that the latest version of note 1172948 has been implemented
- Please follow the recommendation in note 1314587.
- Check table 'DSWPGLOBALCUSTOM' and ensure that the entry 'DTMLOG' is available. Create the entry if missing.
These procedures will solve this issue. -
Newbe requests help with audio for slide-show on Premiere Elements 4.
I recently wrote you regarding a problem I was having with a slide show I was making on Premiere Elements 4 importing photo clips and music from PhotoShop Elements 9. Thank you for your help.
This very large slide show, some 200 clips that I have not resized is completed. I am now having many problems with the music audio I am adding to various sequences of the slide show. Specifically:the audio will not stay fixed on the places where I put it and end it. Working on the Timeline Usually the length of the audio is shorter than the ending of the photo clips where it must go. I click on the audio and stretch it and end it at the place I designate. However, the other end has moved also so now I am left with a gap where there is no audio at the beginning of the segment. Now in addition, the "Delete and Close Gap" does not work most of the time causing me to manually move the photo tiles which sometimes move when this happens. I have to move each one or two individually to the left to close the gap and many times this causes loss of one or two photo tiles or they are out of order or have increase in number (of the one I am moving).
The program has also shut down for the past 10 days causing me to lose a good deal of work and sometimes photo clips and sometimes I get many duplicates of the photo clips. All I do is edit mostly the same two segments doing this over and over because I can't proceed to importing any more music because I can't get the first segments correct. I have chatted with you people, Sony techs, Microsoft Techs and Canon Techs. The Sony techs suggested the program was at fault and I used the original installation disk and repaired the program. It has still shut down on me but not as much.
I got error messages on the photo-cap instructions page you suggessted otherwise I would show pictures of the above problems.
I tried to copy and/or cut and paste from the Timeline thinking I would start a new slide show in PhotoShop Elements 9 using the same photos in reverse. The program would not let me copy or paste. There is great difficulty in highlighting the photo tiles in Timeline because I have to shift click on each individual tile and there are too many tiles and it would take too long to get a whole segment copied. Maybe you know another way to do this?
I am at a stand-still now and I am quite despondent because I have been working on this slide-show for 3 months and it was a surprise for my daughter's 25th anniversary that was last Tuesday.
I do hope you have some good suggestions that will lelt me complete this Project and get it on a disk. I am not that technical so please be specific.
Thanks in advance.
KathyHere's the basic advice I'd give, based on my experience. Much depends, though, on your goals and the specifics of your computer system:
1) Resize all of your photos to no larger than 1000x750 pixels in size. This is VITAL if you want the program to maintain stability as you work. Also render often (by pressing the Enter key). When the render, the red lines above the clips on your timeline will turn green and the program will run much more efficiently.
2) Work on your large slideshow project in shorter segments. You've got over 15 minutes worth of slides. Try working on this slideshow in 5 minute segments, output each segment and then combined the finished videos.
3) Use only WAV audio as your music and audio for your slideshow.
4) When you add video, audio or stills to a parallel track on your timeline, hold down the Ctrl key to override the ripple function and your current clips will remain in place.
5) Maintain your computer by using a tool like the excellent, free, one-click Advanced System Care available at http://www.iobit.com/advancedsystemcareper.html
As for Delete and Close Gap, how it performs depends on whether you've selected Clear or Delete, whether you've pressed the Backspace key or the Delete key and if there is video or audio on a parallel track. (This is all covered in my books, by the way, if you're interested.)
Without knowing the specifics of your project and your situation, it's hard to give out more specific information -- but this advice should get you a long way toward completing your project! -
HT3625 I don't have a "Use audio for:" menu in my system preferences
When I go to system preferences and try to follow all of the directions in the article, there isn't any menu or anything that says "Use audio for:" when I'm on the input tab of the sound preferences. How can I get my MBP use the audio input instead of detecting it as an audio output?
malcolm007,
Here is a pin description of the 4 pin connector, there impedence and shunting that needs to be taken into consideration, not to mention the response curve that this is optomized for,ie:headset mic response. There could be potential damaged cause by incorrect matching and shunting (shorting certain pins to ground) you might consider calling Apple and see what their response is. You can even try experimenting at your own risk, I myself can make no recomendation and would advise against it as you could risk damaging your device. I found no data that would allow an informed decision on my part. The audio quality would most likely be sub par for a music type of application anyways, as it is most likey optomized for the headset mic as prviously mentioned.
USB interfaces are cheap and most sound good and will definatly provide a safe and flexible way to get in.
IMHO
http://www.speechrecsolutions.com/assets/iPad_and_microphones.pdf -
How to delay the audio to lip sync? (of the entire system)
I`m using a LED 32" LG screen via hdmi, but the audio is outputing directly via usb to my Mbox Mini, and the image have a small delay (5 frames) but the audio not, so the result is out of sync videos.
Of course there`s tons of apps that can solve the problem by compensating, like VLC and MPlayer X, but the problem is that i`m a video editor and use FCP and Motion all the time. For playbacking with these apps (after making the 5 frames compensation) turns into a perfect results, but during video editing it`s a pain to lip sync.
Of course as i know that the delay is 5 frames, when i output i could delay the entire audio, but it would be a pain making this everytime and for internet streaming the videos would still off sync.
There`s anyway i can delay the audio of the entire system?
PS: I`m using Lion 10.7,> I wonder if there is any way to delay the opening of a
MIAW. In particular i
> have the following
If you want other activity to take place, you could use a
timeout object:
dialogue = window().new("D_XML_Test (Greek2)")
dialogue.filename = "path to file"
t = timeout().new("mOpenWindow", 60000, #mOpenWindow,
dialogue)
-- #movie script:
on mOpenWindow aWindow, aTimeout
if ilk(aTimeout, #timeout) then aTimeout.forget()
if ilk(aWindow, #window) then aWindow.open()
end
If you don't mind locking out activity, you could use the
delay()
function, but I wouldn't recommend that approach -
Extractor for notification of type 'general'
Hi,
I know the extractors for notifications of type quality, plant maintenance and service - e.g. for qm notification item : 2lis_05_q0item.
But does anyone know some data sources to extract notifications of type 'general'? They are stored in the table QMEL, and I get some data from 0notificatn_2_attr, but I need item/cause information as well.
Thanks,
TorbjornHi,
I think you may not find that kind of Datasources, all data sources from Business content coming from the dif. applications
(SD,MM,PM.. etc).
the only thing, we need to find is whether the data is coming properly or not from related table.
Otherwise we can create new Generic Data source based on our requirement.
Regards,
Madhu -
After Effects CC 2014 plays/renders incorrect audio for mp3 (Mac OS X Yosemite)
Hi,
I'm translating the audio for a number of animations made in AE. Sometimes when the mac users import new audio in another language, AE plays and renders a totally different mp3 file than what has been imported. It is playing another piece of translated audio from another folder but I can't tell where from (as it's in another language).
When I click reveal in Finder, the track in Finder plays the correct audio.
When I re-import after purging and emptying caches, AE still plays the wrong audio.
I found a work around where if I copy and re-name the audio and import that it works. The problem is, we can't tell when this has occurred until reviews have been performed and it's costing us a lot of time in re-renders and fixing.
Does anyone know what causes this problem? Has anyone even encountered it?
Any advice is much appreciated.Does anyone know what causes this problem?
Sure: You are using MP3 files. AE never has been good with them. Convert them to WAV/ AIFF.
Mylenium -
iPhone 6. While talking on the phone, email interferes w/audio for other party. Email message pops-up on the screen and the other party cannot hear me until I click "close" & remove the message. Ideas??
Alex, thanks for the reply but it did not answer my question. I only want to turn off notifications & interruptions while I am on the phone. For this desired result, the only way the Do Not Disturb feature would help is if I manually turned it on before each phone conversation. Since my phone rings at random times, this is not possible. Basically, I just want to "opt out" of call-waiting. When I had a landline I never had call waiting. I don't want to be interrupted. But beyond that, even if I am being interrupted why are these notifications preventing the other party from hearing my voice?
-
No sync with audio for input files AVI MPEG4 23.976 fps
No sync with audio for input files AVI MPEG4 23.976 fps.
If i open in Premiere Pro CC any file AVI MPEG4 23.976 fps (with internal audio MP3 or AC3) i got growing out of sync from start to end of file, even while play it at internal media player of Premiere Pro CC for source file.
Using external audio files AC3 or MP3 not help.
In properties of source file i see 23.97 fps instead of 23.976 fps, and time of internal file is wrong.
If i try Clip > Modify > Interpreter Footage > custom settings to 23.976 time i see right time, but when i click "OK", custom fps saved as 23.98 fps instead of 23.976 fps and time of source goes wrong again.
So i always get bad sync such files in Premiere Pro CC while play or export them.
But in all media players, other editors, and in PluralEyes sync OK with all such files.
If i open M2TS or MP4 (H264 23.976 fps) source file, all OK, it it shows as 23.976 fps, time is right, and sync OK.
So i want to add automatic detection 23.976 fps instead of 23.97 fps for source AVI files with 23.976 fps.
Is it possible?Yes, i know what XviD and DivX does not edit well in Premiere Pro. And because of that i create this topic "No sync with audio for input files AVI MPEG4 23.976 fps" and was hoping to get help in solving the problem, rather than stating that the problem really is.
XviD and DivX it is MPEG4.
Xvid (formerly "XviD") is a video codec library following the MPEG-4 standard, specifically MPEG-4 Part 2 Advanced Simple Profile (ASP).
http://en.wikipedia.org/wiki/Xvid
I have many old useful materials in XviD and DivX formats, and have no other formats versions for that material.
XviD and DivX are very compact formats to store video at acceptable quality and it is fully compatible with all players and editors for PC except Premiere Pro.
You suggest to convert them to another format (DV) to make compatible with Premiere Pro... It is not what i want.
Let me explaine:
1) Size of files
uploaded AVI XviD 1280x720 file with very good quality have size 1.9Gb (with audio AC3 2.0). If i convert it via VirtualDub from "AVI XviD" to AVI DVCPRO HD 1280x720 (without audio) it have size 35Gb, and quality is worst than at XviD-HD, and also converting take much time.
2) Compatibility with AC3 and MP3 audio inside AVI
AVI DV / AVI DVCPRO not compatible with AC3 and MP3 audio inside, only with PCM
http://en.wikipedia.org/wiki/DV
AVI XviD and DivX can use AC3, MP3, OGG audio without any problems.
Size of 1Hour 30Min "AC3 Stereo 48kHz 16bit 384Kbps" file is 257Mb
Size of 1Hour 30Min "PCM Stereo 48kHz 16bit" file is 1030Mb
3) I have and use hardware H264 encoder card "Matrox CompressHD" for export my material
http://www.matrox.com/video/en/products/compresshd/specs/
This card works only from Adobe Premiere Pro, so i can not use it from VirtualDub or other editing software.
So i need a full compatibility Adobe Premiere Pro with all popular standard formats of input files.
Here we see:
http://www.adobe.com/products/premiere/extend.html#Supportedvideoformats
Supported video formats:
"Adobe Premiere Pro CC leads the industry with incredible, thorough native media support, meaning you can edit virtually all of the major video, image, and audio formats natively without waiting."
As most PC users knows, AVI XviD it is a very popular free video format, and would be very useful if Adobe will make normal compatibility with that format in Premiere Pro. -
After compaing many prducts in the category I went with Forms Central because overall it looked like it had the potential to be the best, and I still think that, but I am now very dependent on it and need a few answers if possible. First of all FormsCentral doesn't seem to show up on Adobe product lists when phoning in for help or in some on-line places. Is FormsCentral considered an Adobe core product that they are committed to long term? I've tied phone support 3 times now - and left a callback number and each time they call back and I jst get the recording with music on hold and have waited over an hour each time and still have not had anyone pick up the phone.
But specific questions related to the product:
1. Why can I not have notifications go to an e-mail other than the one registered on the account. For confirmations you can specify a co-author's email for the reply to field, but why not the same for notifications back to the form owner. And how can you specify not to use a reply-to addresss at all?
2. What kind of backup does Adobe offer on forms and their data in the event of some disaster on the form owner's part. Is there a way to retrieve the forms and data from a prior date if need be?
3. When publishing a response results table to a web addreee, how can I put a pssword on it to be required to open it? I know it has a very unique address and not likely to be seen accidentally by anyone but I have a client who insists on that befoer he will use it.
4. A unique ID field option would be nice
5. A hidden field on the form results that captures the form filler's IP address would really help too.
Overall though great product and if you can keep the enhancements coming this product will be tops.
Many thanks.We apologize for the poor experience you had with our call-in support. We are definitely committed to FormsCentral. If you ever have any questions do not hesitate to post them on this forum or send an email to [email protected] Both I and the entire product team monitor the forum and that email alias. We are here to help you... your feedback also helps us to build a better product.
Regarding your questions:
I wrote up a FAQ on how others can receive e-mail notifications. You can read it here: http://forums.adobe.com/docs/DOC-1424I'm not sure what you mean by this "And how can you specify not to use a reply-to addresses at all?" E-mail notifications only have a no-reply address and submission receipts have an option to turn it off.
The form file has a history. Click the clock in the lower right corner to see it. You can roll back to an earlier version. If you are really worried about data loss you should also save the data out as an Excel file on occasion.
There is no way to put a password on a published form file. You should just share the form file with him and make him a Reader. He would need a username and password to access it and he would see the same thing as the published file.
Good feedback. If you haven't already, you should vote on that in the idea section - someone else has already asked for this feature. This helps us to prioritize.
Why do you need to know the IP address?
Thanks for your feedback!
Randy -
No audio for clips in my event library since upgrading to iLife '09
After upgrading to iLife '09, I noticed something odd in the new iMovie. All of my clips (recorded with a Sanyo Xacti HD1A and imported into the previous version of iPhoto DO show up in the event library, but DO NOT play any sound in the event library. If I copy a clip or move it up to the project editor the audio plays there. Does anyone know why I am getting no audio for these clips in the event library or what can be done to correct the issue?
Thanks,
-MikeFinally got some sound on the clips in my iMovie '09 event library. This is what worked here: I went into the Pictures folder and showed the package contents of the "iPhoto Library". I went into the "Data" folder. I went to a "2008" folder. I located the folder of the first video clip I had for the holiday footage... "Dec 14, 2008". Inside that was a QuickTime file "SANY0001" and a JPEG "SANY0001.jpg". I zipped up the "Dec 14, 2008" folder. I dragged the folder to the trash. I dragged the .zip file out to the desktop.
I opened iPhoto '09. It showed an event for Dec 14, 2008 with a dashed-line round rectangle where it would have normally shown the first frame of the video clip. I closed iPhoto '09 and opened iMovie '09. It alerted me that it needed to generate a thumbnail for some video, and after about a minute the clip was in my event library and playing audio. Not only that... ALL clips in my event library now are playing audio. I quit iMovie '09 and went back into the "iPhoto Library". A new "Dec 14, 2008" folder was there with a new "SANY0001" QuickTime file (I wonder where it got this file from... hidden cache or backup somewhere?). I expanded the .zip on the desktop and dragged the original JPEG file from it to the new "Dec 14, 2008" folder.
I opened iPhoto '09 again. Now the thumbnail (obviously the JPEG file) displays fine.
Double checked iMovie '09... Yep, still playing the audio in ALL the clips in the event library.
I'm not really sure why this worked the way it did. The time it took to generate the new thumbnail was ONLY for the one clip... so it seems rather odd that all the subsequent clips in the event library started to work. Perhaps I just got lucky and it is only that first clip that was throwing everything else off in the thumbnails... or maybe iMovie just looks at the first clip in the event library to determine if it is playing sound or not for all of them?
Another oddity? The original SANY0001 file is "17.2 MB". The new one, which appears to be exactly the same in quality, is "10.8 MB". The "More Info" section reveals a bit more that might be of interest. The original is Codecs: Photo - JPEG, Integer (Big Endian). The new one is Codecs: Photo - JPEG, Integer (Little Endian). Total bit rate in the original is 2,570. In the new one it is 1,605.
Ah well. It works!!! Now I can finally have some fun exploring the new features of iMovie '09 -
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this. The email address is connected to my Ipad and Iphone for the email app, can that have anything to do with it?
If it makes any difference, I updated both my Ipad3 and Iphone4 to ios 7 today. I'm trying to change from my Macbook air though.
Please advise, would really appreciate a reply ASAP.caek1 wrote:
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this.
It means exactly what it says... The email Address is in Use. You cannot re-use it.
Apple ID Support > http://www.apple.com/support/appleid/ -
: how can I import mp3s from my gmail account into my iTunes application so that I can import audio for recording into GarageBand ?
Save the file from Gmail onto your computer and add it to iTunes. How you save from Gmail is a Gmail question (their own support pages), not an iTunes question.
-
QM01 - Add new fields under SUBJECTS tab for notification type Q2
Hi Experts,
My requirement is to add 2 new fields to the create Quality Notification (QM01) Tcode under SUBJECTS tab for Notification type Q2.
I followed the following steps to achieve this :
[ SPRO -> Quality Mnanagement -> Quality Notifications -> Overview Quality Notification Types -> Then I selected Q2 and then selected dcreen structure for extended view -> Double clicked on 10\TAB02 ].
Now I arrived on the screen where we have to define the custom screen area and screen number.
But here in this case (Q2 notification type) all the 5 screen areas are already occupied , so where can I add my custom subscreen ??
Please refer to below screen shot for better understanding :
Please help ! Thanks in advance.
Kind Regards,
Ashish GoyalDear narendra bora
You can enter the more than two persons in but not on header screen. In operation you can make each seperate person responsible for each operation & that can be entered against each operation seperately. Also if operation is carried out by two person then also you can enter that in the form of split.
But it is not possible to enter two users in reported by field.
I hope this will resolve your issue.
Regards
Maybe you are looking for
-
Error when uploading a tif file
Hi All, I want to upload a file in tif format.i am having the file with tiff format. when i upload through se78 /import and given the file name as c:\CCNA- Puerto Rico Region Logo. But it is showing the following error. Uploading TIFF Files to SAPscr
-
Recently I've bought new Lenovo G 580 but I am having a problem: Every time when I type in any number or letter(mostly no.1) into any window( password,bank account,log in,google translate, etc.), inexplicably starts endless series of dots which I mus
-
How do I change the default mail application?
Somehow my mail default was changed to Outlook and I want to change it back to Apple Mail.
-
How can I download a web page's text only?
Hello All I have some code (below) which can download the html of a web page and this is usually good enough for me. However, sometimes it would just be easier to work with if I could download just the text only of a given page. And sometimes the tex
-
CF 9.01 Upgrade breaks Flex Gateway - Help!!!!
I have an AIR app which is using DataServicesMessaging with subtopics enabled. I can create the Consumer in AIR but when I subscribe, I get the following error: "Error","cfthread-0","08/31/10","21:03:35",,"CATALOG_ATTRIBUTES_831AE0FE-B7D2-90A5-87AD-