MAJOR FREAKING UPGRADE OR ITS A MAJOR FREAKING BUG

I JUST BOUGHT 4 NEW CARTRIDGE FOR MY EPSON PRINTER, AND DID SOME PRINTING ALREADY BY THE 3 PRINT IT WAS TELLING ME THAT IT NEEDED NEW INK, I HAVE NO IDEA WHATS GOING ON BUT THE LATEST OS X UPDATE HAS SCREW EITHER THE PRINTER DRIVER OR SOMETHING IS WRONG I WENT THROUGH 2 CARTRIDGE AND NOW I HAD TO REPLACE ALL 4 AND ITS NOT CHEAP THIS IS COSTING ME LOTS OF MONEY.

1 What did you print? Depending on model printer and type of cartridge, Epson inkjet printers tend to get 150-300 pages per cart at 5% coverage. If you print pages which have more than 5% coverage you will get considerably fewer pages. This is especially so if you print pictures on glossy photo paper.
2 Which model printer do you have?
3 How many pages did you print?
4 Did you have to clear clogged print heads? Doing that can use up 10% of the ink in the cart, so clearing the heads two or three times can reduce the available ink appreciably. Note that some model printers, and not just Epson printers, will run the clean head routine automatically.
5 Which driver did you use?
6 You do know that Apple merely publishes the drivers, and it's the machine's vendor, in this case Epson, which writes them, don't you?
7 You do know that ranting in ALL CAPS is likely to make you seem to be someone who shouldn't be taken seriously, don't you? Over and above the minor fact that it's hard to read. And that means that you're not at all likely to get assistance.

Similar Messages

  • My First Major Version Upgrade on Mac

    Hello, this is going to be my first experience with a major version upgrade on a Mac. My question is simple, will Software Update see it (it doesn't show version 8 yet) or am I to download it manually seeing as it's already available for manual install.
    Thanks.

    Thank you for your quick reply. I will sit here and wait then.

  • Major version upgrade of WebLogic with zero/minimal downtime

    From what I can tell, the recommended approach for supporting minimal downtime during major version upgrades (e.g. WL 9 -> WL 10) is to have 2 domains available in the production environment.
    Leave one running to support existing users, upgrade the other domain, then swap to perform the upgrade on the first domain.
    We are planning on starting out with WL 9.1, but moving forward we require very high availability...(99.99%).
    Is this my only option?
    According to BEA marketing literature, service pack upgrades can be applied with "zero" downtime...but if this isn't reality, I'd like to hear more...
    Thanks...
    Chuck

    Have gotten as far as upgrading all of the software, deleting /var/db/.AppleSetupDone, and rebooting.  It brought me back in to Setup Assistant and let me choose "migrate from another mac os x server" and is now sitting waiting for me to take the old server down and boot it into target disk mode.  Which we can probably do Sunday at about 2am or so...
    You know, Setup Assistant should really let you run Software Update BEFORE migrating from another machine.  We have servers that can't be down for SoftwareUpdates in the middle of the day...

  • Major gridlines - how to change how "major" they are

    Hi.
    I have a personal weight graph with time (days) on the X axis. There are 700 days on the X-axis scale. (I am pleased to see Numbers '09 can now handle graphs with lots of data points!) When I turn on Show Major Gridlines (Format / Chart / X-Axis / Show Major Gridlines), the entire chart background is black. This tells me it considers each of the 700 days to be "major" enough to merit its own gridline. How can I change it so that each, for example, month is major, so that the gridlines are useful? I've already set X-category labels to be every 30 days, but that makes no difference to how "major" the gridlines are.
    Help!

    What kind of chart are you using?
    For lines ones, there is no 'major' gridline for X-axis.
    We may just enable or disable Show gridlines.
    Yvan KOENIG (from FRANCE jeudi 15 janvier 2009 15:00:11)

  • Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

    Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
    == URL of affected sites ==
    http://www.hotmail.com

    We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

  • Mail is trying to upgrade but its taking days!

    Just bought new iMac and the first time I tried to use Mail it wants to upgrade but its taking weeks.
    Any suggestions please?

    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click the line below on this page to select it:
    ~/Library/Mail/V2/MailData/Envelope Index
    Copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
    Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

  • Major version upgrade cost for Photoshop Touch

    Does anyone know if each major Photoshop Touch version will be a paid upgrade or is it a wait and see until we reach 2.0 kind of thing? I have no issue with paying for upgrades and developers should get rewarded for their hard work. I'm just wondering if I pull the trigger now or wait until a 2.0 update. I see that PS Touch is only on version 1.4 so maybe I just pull the trigger now, not worry about it and enjoy while I can.  I think I just answered my own question. ;)

    Hello:
    Re-running my models will take at least a week of compute time.  In the meantime I need to do some scoring.  Is there a way I can recover a former run with existing models and scoring module so I can get my results?
    Thanks for your help.  This is the experiment (which now fails):
    https://studio.azureml.net/Home/ViewWorkspace/ffac4490b5e448fa8778ceadc74a0b97?&hashSeg=#Workspaces/Experiments/Experiment/ffac4490b5e448fa8778ceadc74a0b97.f-id.45c727a9f5654d5f9a9b2629d25c0669/ViewExperiment

  • Just upgraded to iOS 7 and messages are showing up on multiple phones within our family.  We all use the same iCloud account. I believe this happened the last time there was a major iOS upgrade but I can't remember what the fix was!  Help!

    The four members of my family just upgraded to iOS 7 last night.  We now find that we are receiving each other's text messages.  It's possible that during the installs, a few members may not have "unckecked" the multiple phone numbers they can be reached on.  I know that I had to uncheck my husbands work mobile number and work email address as they came up as choices for contacting me.  So now I am receiving some of my daughter's text messages on my phone - she's not impressed!  My husband is receiving my texts etc...  It's a mess!  I appreciate any help anyone can offer!

    I had this problem last night as well.  Only my daughter upgraded to iOS7 and she had an old phone of mine.  When she upgraded, the phone asked for my apple ID and then continued as normal.  However, after the upgrade, any text message that I recieved, she also recieved.  I am pretty sure my wife thought I was hammered when she started texting me and my daughter began answering her not having any clue what she was texting about.  Anyway, this only occurred with texts from other family members, not from texts I received from friends who are obviously not on our account (we have Verizon BTW).  To resolve this issue, and it isn't a short resolution.... there are two options...   One, simply erase everyting on the phone.... I don't like iTunes 11, so we were unable to back up her phone.  I made her go through her 600 photos, delete the ones she didn't want and email the ones she wanted to herself, and then we wiped the phone clean and rebooted it... go into Settings, General, Reset, Erase All Content and Settings.  The second option, if you have iTunes 11 is to back up the phones one at a time,  and then go into Settings, General, Reset, Erase All Content and Settings.  Either of these options wipes the phone clean of all information, text contacts pictures etc and then you have to re-enter all of your individual information.  When you do that, make sure that no one is on the same iTunes account.  Theoretically, after you do this, you plug back into your computer and SYNC your phone from the last back-up.  This resolved the problem for us.  I don't know if there is an easier solution, be we tried logging in and out of our iTunes Accounts, turning the power on and off, and nothing changed.  So, we had to go the more difficult route to avoid mass confusion with family texting.

  • N95-1: MAJOR Firmware-upgrade - v21.0.016

    It's already available at my local "Nokia Service Point", overhere in Holland . . .
    But when will it be available via the "Nokia Software Updater"?
    Greeeetzzz, Henk.
    RM-159 / Nokia N95-1 (8Gb)
    V 21.0.016 (02.01) / 14-02-08

    19-Mar-2008 01:05 PM
    hanhanteka wrote:
    (snip) shall any one from nokia reply our inquiries, why the update is still not officially released ?
    Whilst it would be nice for a reply from Nokia - this forum from Nokia is a One-Way Conversation with them - they "sometimes" read but dont ever reply, as this is designed to be a Peer-to-peer forum, so the only replies you'll get are from interested/well informed users, and may not be gospel truth.
    They choose not reply which can frustrate most new users, the older ones tend to just put up with it. /end
    The online code number checker is sometimes behind. When the release is official, then it normally appears on this page: http://www.nokia.co.uk/link?cid=EDITORIAL_799361 as have all the other updates.
    When it does you will, depending on if your handset has a branded specific software, be able to download and install it, when its released for your product code. Until then you have to sit tight.
    I dont know why some service points have it, perhaps they have it for beta testers or something. I know I use every function on my phone and if there is a fault in the software I'm highly likely to find it. Unless they are adding more stuff into the N95 the current V20 performs pretty well.
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • VirtualBox is still slow after major system upgrade.

    I love my arch linux setup and really only use windows for a few school projects which require it. I decided that I would install windows 7 in VirtualBox. I bought a AMD FX-8120 3.1GHz AM3+ 8 core processor with a new motherboard and DDR3 memory in hopes of better performance than my 5 year old AMD 2.8 Ghz duel core.
    However, after upgrading my hardware and maxing out virtualbox settings I find no noticeable improvement in performance. CPU usage rarely goes over 50% and mainly hovers at about 30%.(Base arch setup uses about 3%)  Are there any kernel modules or virtual box plugins which can take fuller advantage of my hardware?
    Last edited by SteveDeFacto (2013-08-27 19:38:41)

    headkase wrote:In VirtualBox here is a setting to accelerate 2D rendering.  If I remember correctly however, that is specific to Windows XP.  Make sure you have the guest additions installed in Windows 7 and see if the acceleration setting works for that too.
    I actually just figured it out. It appears that in the case of VirtualBox more is less. The fewer processors I use the faster VirtualBox runs. So when I was using 6/8 processors VirtualBox was as slow or slower than my old setup. Now with only one it runs much faster than it did. I can use 2 processors but I don't see any difference from using 1 and If 6 processors run slower than 1 I suspect it is only slightly worse.

  • Major problems upgrading from 10.3 to 10.4

    I upgraded from 10.3 to 10.4, and all my mail save for the last 2 weeks disappeared. Those emails that did successfully survive the upgrade all contained the message "...has not been downloaded from the server". So, as was suggested in this forum, I rebuilt the mailbox. All my old mail disappeared after I did this. Needless to say, this is not an improvement. I'm unsure how to recover my old mail - anyone have any ideas?

    Hi Pitir and Allan,
    Pitir's problem might or might not have to do with truly overfull mailboxes. I have had similar problems when attempting to migrate to the Mail.app 2.0.5 (the one coming with 10.4.3).
    After a good few hours of wasted time I now refuse to accept the overfull email explanation as universally applicable. This is not intended in any way rude, Allan
    I have had large and small mailboxes show this message. A large one was ~1800 messages totaling ~43 or so MB. A small one only contained around 100 or so messages and still had the problem.
    Installed 10.4.3 cleanly on a new disk. I copied Mail.app preferences and address book (preferences and application support files). So far so good.
    Attempted importing my email into the new Mail.app in various ways:
    1) Copy the old mailbox folder + preferences etc. from my 10.3.9 disk onto the new disk and let Mail.app converte upon startup -> lots of "message not downloaded, go online" style messages.
    2) Completely empty the Mail.app 2.0.5 mail folders and start it empty. Then select the 'Import' command from the file menu. This imported everything nicely. However, running Mail.app the next day I found it had -- without telling me -- lost a lot of messages. Some of them -- I am 100% sure had been imported OK. They just vanished overnight in-betweeen two Mail.app launches. There were no error messages or warnings.
    In my experience, Mail.app 2.0.5 is not trustworthy. All I can do is recommend avoiding it. Switch to Thunderbird or something else for the time being. I hope Mail.app after 2.0.5 will fix this. I don't really know how to test that (and be confident) then, though.
    Mail.app 2.0.5 is the biggest disappointment for me so far (and I very much hope the biggest disappointment ever) as a long term user of Mac OS. It is really quite shocking.
    The blood is still on the boil a bit...
    Cheers,
    Joerg

  • Using physical standby to upgrade to the next major release

    Hi
    Can one use a physical standby to upgrade from 9i to 10g or from 10g to 11g ?
    We cannot use logical standby due to datatype problems
    Thanks
    Orna

    You can use logical standby to perform a rolling upgrade, if you are above 10.1.0.3 - see http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_RollingUpgradeBestPractices.pdf
    Also see http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_TransientLogicalRollingUpgrade.pdf
    HTH
    Srini

  • Upgrading to SSD Need major help

    Hello, so I have a big problem here. I bought a SSD and i thought the samsung data migration can do the trick.
    The problem starts because I can't retrieve the file? It says it is unable to copy from my HDD. So I thought it was the windows that is corrupted so I did everything I could to repair the files and even when it is repaired, I can't migrate the data. I tried other migration software such as acronis but it still displays the same error.
    What I need help is, could I just put in the blank SSD and then HP recover into the SSD drive?
    I am running a HP Pavillion dv6-6c19tx
    I'm just gonna forget about whatever programs or data I have in the HDD because I can mount the HDD after that and copy it over.
    Of course, if cloning the HDD is possible... it'd be really good
    This question was solved.
    View Solution.

    Hi,
    Yes, you can use HP Recovery disc set to start from the begining and you need to know one more thing: capacity of the SDD must be equal or greater than the existing HDD. After that, you can put the old HDD to an enclosure and copy user data/files over. You may need a different machine to copy because your old machine can see the old HDD is its resource.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Major disaster - upgrade of iTunes messed up my library

    I live and die by my iPod, I am a dance teacher and cannot function without it.
    I was prompted to upgrade my version of iTunes in order to download from the music store yesterday. Once I had upgraded the software, literally hundreds of songs in my library displayed the ! symbol and their files cannot be found. I really don't have hours to spend re-loading the hundreds of CD's that appear to be missing. Literally whole albums are either showing ! or do not even appear in my library at all.
    Please help, I won't sync my iPod until i have fixed the issue but am really annoyed about the problem. Will the music still be stored in my previous iTunes library files, and if so can someone give me dummy steps to restore a) my library and b) my sanity!
    Thanks
      Windows 2000  
      Windows 2000  

    Hi I wasn't around yesterday evening.
    The reason I was thinking about moving stuff out of your current iTunes was to avoid lots of duplicates when you load up from your iPod, but I didn't want you to delete it.
    You really ought to have a backup system in case of disaster, especially as this is your work. For that the best thing is an external HDD if you can afford it. It's probably tax deductible.
    That way you can make sure you can always recover from disaster quickly. As an aside this is an article about backing up.
    http://discussions.apple.com/thread.jspa?messageID=1522195&#1522195
    How do you feel about that? If you get an external drive you could just move you iTunes folder out to the external drive and start afresh on the PC.
    If not, if I understand you correctly you have a 20GB iPod, do you have 20 GB free on your disk with some extra to spare?
    If you look in My Music you should have an iTunes folder and in that will be a folder called iTunes Music, is that where your music is?
    Anyway what I suggest you do is to close iTunes then rename the iTunes folder – maybe call it iTunesOld. This will be your old version of iTunes with the incomplete library and will be a backup for the time being.
    Now if you start iTunes is will create a new iTunes folder with an empty library and iTunes Music folder.
    Now use one of the methods from the Zevoneer link to recover your music back from your iPod into this new empty iTunes library.
    I would suggest you use one of the commercial programs such as Copypod as they will be easier for an inexperienced user. I haven’t used it myself, but Copypod looks easy to use. I did have a look at Yamipod, but it gave a worrying message about not working properly with an iPod synced with my version of iTunes so I closed it without doing anything. Zevoneer also gives a link to Wired News which has some reviews.
    Here's the link again
    http://discussions.apple.com/message.jspa?messageID=3860757#3860757

  • MAJOR problem upgrading from Panther to Tiger.

    After what seemed like a successful installation of Tiger, after the installation software asked me to restart my computer, the computer just will not start up. Every time I start my computer up, it tells me that I need to restart it. I would really appreciate any help, and if there is any way of re-installing even though the volume doesn't boot. Thanks.

    Berny,
    Welcome to Apple Discussions.
    Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD and
    Using Disk Utility and fsck to resolve startup issues or perform disk maintenance are two good places to start the troubleshooting process.1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk.Let us know what happens.
    ;~)

Maybe you are looking for

  • In iOS 5, how do I move photos to an existing album?

    On my iPhone 4 with iOS 5, I see how I can select several pictures in my camera roll and move them all to a new album. But how can I move them to an album that already exists?

  • Optical drive will no longer recognize DVDs

    My optical drive is no longer recognizing DVDs. It just makes some noise and spits them back out.  It will read some CDs, and it recognized my expired AppleCare tech support disk, but not DVDs.  I have even tried several DVDs that I watched just a fe

  • Can't edit my idvd project

    I've been working on an idvd project. I can preview the slideshow but can't seem to find where to edit it or add more pics. I had been doing fine and now all of a sudden it seems to be lost. Help!!!!

  • How To Edit Sub Menu Items

    When I go to edit the sizes of my sub menu items, how do I edit the sizing for all of them? I can't remember the shortcut key that you hold while dragging / sizing the menu item.

  • ORA-27092 when running startsap

    Hi All, We have a weird one. Following a reboot of out AIX 6.1 box, we are unable to start SAP as it fails when starting the database: Caused by: java.sql.SQLException: ORA-01116: error in opening database file 5 ORA-01110: data file 5: '/oracle/EPD/