Make a log of updates being installed?

Hello Community,
I have been on Arch for a couple of days and nothing has broken that I have seen yet , however it could happen and I look at what is being installed in the updates but may not see the danger in that specific update being so new. I do check the Arch news page and skim the forums every morning before I upgrade but I know that if I upgrade that morning and not notice something wrong till later that day I won't remember every package that got updated. Does pacman store a log of what it has installed or is there a command I can issue with the update to output to a log in my home folder in case I need to look at this later. Maybe paranoid, but would rather have all possible information available as the way Arch works is new to me.
Thanks

DMGrier wrote:would rather have all possible information available
You have e.g. the man pages and the wiki. Please search before posting.

Similar Messages

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists

Have CS 5 Installed on my iMac and works ok. But installed on my new MacBook Pro it won't open NEF files from my Nikon D810. Displays NEF icons, but when I try and open them the response is: Make sure latest RAW updates are installed. If problem persists follow link: http://www.adobe.com/go/kb407111. Have installed Bridge 5.0.2.4; Raw Ref Version 7.0.0.308; DNG converter_8_7_1.dmg; Bridge 5.0.2 Update 2. Also same problem with Lightroom which I don't normally use. Lightroom_3_LS11_mac_3_6.dmg installed.

In the link you posted it states that the Nikon 810 requires ACR 8.6 or newer.
Version of ACR are specific to versions of Photoshop. You cannot use 8.6 nor even 7.0.in CS5.
I believe that ACR 6.7 is the latest that will work with CS5, so make sure you have this installed and get rid of ACR 7.
Having 2 versions of ACR will cause problems.
You have already downloaded DNG Converter 8.7.1.
Have you double clicked the DMG file to allow you to install DNG Converter on your computer?
Be aware that DNG converter is a stand-along application and not a plug-in.
You need to open DNG converter at select the FOLDER that contain your .NEF files.
Don't open the folder and try to select individual files, it doesn't work that way.
After converting your D810 files to DNGs you can then open the DNGs in CS5
The problem is your camera didn't exist when CS5 & its version of ACR was developed.
i don't use Lightroom, but the list mentions Lightroom 5.6 as needed to open D819 so your 3.6 version of LR won't cut it.

Updates are being installed by system administrator - stuck!?

Snow Leopard Server seems stuck on this process and indeed I am now scared to reboot!
I have logged on as a diradmin and the updates are visible in the Software updates and despite my clicking install, it does not and seens hung at this process and then if I log out and attempt to apply "software Update" via the Apple menu it tells me that it cant as "Updates are being installed by the system administrator"...
Its a catch 22, closed loop of some sort!
thanks
Graham

Hi Linda,
Please try the steps mentioned below:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

When I try to update or install apps on my iphone it tells me my apple id has been disabled but when I go to the pc, I can log in fine. Can someone help me?

When I try to update or install apps on my iphone 3gs, it tells me my apple id is disabled, but when I log in on my pc it lets me. Any ideas what to do?

Try signing out, then back in on your phone: Settings>Store>Apple ID, tap the ID shown, sign out, sign back in. If that doesn't work, reset your password here: https://iforgot.apple.com.

Hello, I have Windows 7, and I have now to install Windows 8 on my Computer, and since, I cannot make any more of update of Apple of itune in Windows 8. Nor to download the software recent of itune... That have to I make???

Hello, I have Windows 7, and I have now to install Windows 8 on my Computer, and since, I cannot make any more of update of Apple of itune in Windows 8. Nor to download the software recent of itune... That have to I make???

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

HT5364 Adobe flash player not working on Safari after being installed, System OS X 10.9.2 has been just updated to Maverick

Adobe flash player not working on Safari after being installed, System OS X 10.9.2 has been just updated to Maverick

    Enable Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Click "Manage Website Settings"
    Highlight "Adobe Flash Player", "Allow" and then "Done".

HT4623 now my iphone is 3GS 32GB and now it is version 4.1 and i make an update to 6.01 and the update is installed but there is an error saying that the activation server is temporarily unavailable and saying try connecting to itunes and to activate and

now my iphone is 3GS 32GB and now it is version 4.1 and i make an update to 6.01 and the update is installed but there is an error saying that the activation server is temporarily unavailable and saying try connecting to itunes and to activate and i do but nothing new i need a solve for my proplem now !!

That message usually indicates that the phone was either hacked/modified or jailbroken?
Was this phone ever locked to a different phone carrier?

In AppStore.app for some reason when I try to update my apps, it asks for the wrong user account than the one that I am logged in with. This makes me unable to update my apps

In AppStore.app for some reason when I try to update my apps, it asks for the wrong user account than the one that I am logged in with. This makes me unable to update my apps

You would have downloaded those apps with the wrong Apple ID then created a new Apple ID which is the on you are on now. This is acting as normal because all content downloaded from the iTunes and App Store is attached to the Apple ID it was downloaded with. To stop this you would delete the apps and redownload them with your current Apple ID you are signed in with.

I installed Mavericks a few days ago and downloaded all the available updates, which installed correctly (or so it says). Now I can't open my iPhoto app because it says it's being updated. Any suggestions?

I installed Mavericks a few days ago and downloaded all the available updates, which installed correctly (or so it says). Now I can't open my iPhoto app because it says it's being updated. Any suggestions?

There are two ways to recover from this condition.
1. Select
Store ▹ View My Account
from the App Store menu bar, then select View hidden purchases. Stop or resume the download.
2. Open LaunchPad and find the icon of the app you're trying to install. There will be a small progress bar below it. Click the "X" to stop the download.

What Microsoft Updates are really being installed?

I’m updating Win 7 64 Bit PCs using WSUS. On the PCs. In “Windows Update, “You receive updates:” is set to “Managed by your system administrator”.
The problem is determining what was installed. WSUS installs doesn’t jive Control Panel>All Control Panel Items>Programs and Features>View Installed Updates or Control Panel>All Control Panel Items>Windows Update>View update history.
In WSUS, 20 updates were installed, including 2 Office updates. In “Control Panel\All Control Panel Items\Windows Update\View update history”, 12 updates were installed on that day, including the 2 Office updates. The “Control Panel>All Control Panel
Items>Programs and Features>View Installed Updates” shows 40 Office updates alone were installed on that day.
What’s going on? How can I tell what updates are being installed?

Hi,
We might take use of the status reports:
WSUS 3.0 SP2 Reports
We could generate three reports:
1. Update Reports: provide the status of the updates;
2. Computer Reports:show you the status of computers;
3. Synchronization Reports: enables you to see synchronization information for the WSUS server for a given time period, including errors that occurred during synchronization and a list of new updates. In addition, you can get general, status, and revision
information for each new update.
More detailed information, please check the link above.
Besides, we might consider seek help in WSUS forum and see if experts there could share some insights about this.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverwsus
Hope this may help
Best regards
Michael Shao
TechNet Community Support

I installed update for OS X Mavericks 10.9.5, I Tunes 11.4, and Digital Camera RAW 5.07 shows as being installed but they all still show as updates available

Installed update for OS X Maverick 10.9.5 and shows as being installed but also still shows as an available update in Apple store

Kernel Panics today:
Kernel Extensions in backtrace:
         com.apple.filesystems.smbfs(2.0.2)[E043DE0F-9336-3C61-9C82-F029B430A3EB]@0xffff ff7fabb77000->0xffffff7fabbc2fff
            dependency: com.apple.kec.corecrypto(1.0)[DB137B94-65D2-32AF-B5BC-80A360E104C3]@0xffffff7fa bb2b000
            dependency: com.apple.kext.triggers(1.0)[A7018A2E-1C0C-37B8-9382-67786A396EAF]@0xffffff7fab b72000
Kernel Extensions in backtrace:
         com.apple.filesystems.smbfs(2.0.2)[E043DE0F-9336-3C61-9C82-F029B430A3EB]@0xffff ff7f85e2c000->0xffffff7f85e77fff
            dependency: com.apple.kec.corecrypto(1.0)[DB137B94-65D2-32AF-B5BC-80A360E104C3]@0xffffff7f8 3f2b000
            dependency: com.apple.kext.triggers(1.0)[A7018A2E-1C0C-37B8-9382-67786A396EAF]@0xffffff7f83 f72000
BSD process name corresponding to current thread: Finder
Mac OS version:
13E28

ITunes Makes Me Log in Every Time I Open It

iTunes v. 12.0.1.26 and Yosemite updates recently installed. 2012 27" iMac
iTunes makes me log in every time I open it. I thought the problem was fixed in THIS THREAD and it was a very helpful set of instructions by Linc but the problem keeps recurring.
I reposted the question in that thread, but since the thread is marked as solved I'm afraid no one will see it. So I'm reposting here.
Situation:
Upon opening iTunes I get messages popping up telling me to
Sign in to iTunes to use this computer for automatic downloads
Sign in to iTunes for iTunes Radio to use autodowload
Sign in to iTunes to check for downloads
(repeat of) Sign in to iTunes to use this computer for automatic downloads
Sign in to use iTunes Store
These happen one after another, rapidly. Every time. I called Apple help as well and they didn't have any further help.
I've repaired permissions, trashed my plist for iTunes from my Library, done all of Linc's instruction in the other thread.

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Servers where patches will not install automatically or manually, Live updates are broken and when checking installed updates shows "NO UPDATES ARE INSTALLED ON THIS COMPUTER" SFC \SCANNOW will not run

Hello, (Bit of a long one but please read)
We have 3 servers in same physical location and server OU etc that are exhibiting the exact same behaviors (we have server servers in this location that are not), as above theyt are all W2008 R2 SP1 and all built from the same standard
image we use on hundreds of other computers, they have also been in production for different amounts of time and we started to see this behavior at different times with them: (Its odd they are all in the same site where there are also several other servers
that are not effected, there must be a link ? )
These servers are all missing several patches when checking our internal tool that reports from IBM endpoint management that we use to deliver patches (they are not all missing the exact same patches some ore or less than other), although
SCCM (we used SCCM to deliver patches until around 6 months ago) and IBM EM are both running (some ptches hark back to the SCCM Delievry days) they are not patching and when attempting to patch manually by downloading the exact patch coresponding to the fixlet
ID and the KB , the stanbdalone installer starts and after some time you receive an error message “The update is not applicable to yoru computer”. Windows update returns error 80070006 for all of the servers.
it is worth noting that other applications and products also using the .MSU extension will insatll so it is not a problem with the installer service.
The above led me to think a corrupt patch may have stopped the sequence of patching so I then looked in “Programs and Features” => “Installed updates” and this is blank for all of them returening the message:
“NO UPDATES ARE INSTALLED ON THIS COMPUTER”. (this I believe is a part of the fundamental issues and resolving this may resolve the patching)
Another issue is that if you run “SFC /SCANNOW” It starts the scan and then returns: “Windows Resource Protection could not perform the requested operation” (Also in safe mode and both from an elevated CMD and WMI is started as a service)
The all three are probably related so I think fixing the “SFC and NO UPDATES SHOWN” issues will resolve the first.
The things I have tried so far are:
Running : wmic qfe list full /format:htable > c:\updates.htm Should produce a list of updates but instead returns : No Instance(s) Available (this is not hopeful)
Fix: Ran the “SYSTEM UPDATE REDINESS TOOL” from http://support.microsoft.com/kb/947821
Result : Update Ran successfully but NO CHANGE
Fix: Ran the automated and manual fix “RESET WINDOWS UPDATE COMPONENTS” here :
http://support.microsoft.com/kb/971058/en then undated windows update agent.
Result : All ran successfully and NO CHANGE
Fix: Ran MBSA
Result : Runs successfully and then stays at “Done downloading security update information” (Log gives no obvious information)
Fix: Renamed the software distribution folder/restarted services (Various variations of this fix online, tried a few)
Result: Runs as described in article with new Software distribution folder being created,
NO CHANGE
Fix: Create/Correct the reg key for windows trusted installer located here HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component Based Servicing\Version (several articles relating to this and the above issues)
Result: the existing key was correct as should be from internal system information gathered , required in article.
Fix: Ran the “Windows update trouble-shooter”
as here :
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
Result: It detected and fixed error’s but still no change.
The WMI Repository checks out on them all for both of the methods I know to verify “Get-wmiobject –list |measure” and ensure count is over 900 and also “C:\>winmgmt /verifyrepository” and the repository came back as “WMI Repository is consistent”. I guess
this is not hard evidence the WMI is OK, but these are the only methods I know.
I have also tried removing the server from its OU , running a GP Update and then rebooting and testing but to no avail (Bit of a longshot but tried to link the distinction between the three servers and the OU GP is one of them)
I have tried a few other articles registering .Dll’s etc , but I did not take a note of links as I was at the start of this and didn’t expect it to go so long so please reply with anything you see not above im happy to try again.
I have thought about removing SP1 and reinstalling it but this will require a major downtime and only possible if the backup files of SP1 have not been removed.
Any help is apreciated !

Hi,
Please try to rebuil the WMI repository.
For detailed information, please refer to the blog below,
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
If issue persists, due to sfc doesn't work, could you try to repair your system with the installation disk?
Best Regards.
Steven Lee
TechNet Community Support

SCCM 2012 R2 - Updates not installing

Hi all,
I have a SCCM 2012 R2 setup at a customer which has problems with distributing updates to the Windows 7 computers in the environment. The update group (with updates that are 100% sure required) is deployed to some test computers but the updates don't get
installed. It is also configured to be able to install the updates without looking at any maintenance windows. I see in the reporting that the updates are required, so in my opinion they should get installed.
I've checked the registry and the Windows Updates registry keys are pointing towards the right server (my SCCM primary site server). I've created a new software update group with fewer updates, same problem.
What I find in the UpdatesDeployment.log on one of the test machines is rather strange:
Assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B} has total CI = 2
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) reconnected to the existing job ({779CA9E2-ABB8-43E1-B8AE-F4A94BA8C761}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment {c076f100-c2f7-43f9-a3f9-51fd33872b94} has total CI = 216
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
Assignment ({c076f100-c2f7-43f9-a3f9-51fd33872b94}) reconnected to the existing job ({A9758363-1871-4BD9-86D9-1BE0D82531AE}) successfully.
UpdatesDeploymentAgent 29/09/2014 15:21:05
1244 (0x04DC)
OnPolicyModify for assignment ({8209BD9C-A86C-460B-99B3-CD6364F8BD1B})...
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
Work in progress for assignment {8209BD9C-A86C-460B-99B3-CD6364F8BD1B}, forced trigger (TriggerEnforce) will be attempted when done
UpdatesDeploymentAgent 29/09/2014 15:23:18
2740 (0x0AB4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4532 (0x11B4)
EnumerateUpdates for action (UpdateActionInstall) - Total actionable updates = 0
UpdatesDeploymentAgent 29/09/2014 15:30:32
4000 (0x0FA0)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>False</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Removing scan history to force non cached results
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 15:46:47
4836 (0x12E4)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 15:46:47 4836 (0x12E4)
Message received: '<?xml version='1.0' ?><SoftwareUpdatesMessage MessageType='EvaluateAssignments'><UseCachedResults>True</UseCachedResults></SoftwareUpdatesMessage>'
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({8209BD9C-A86C-460B-99B3-CD6364F8BD1B}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Assignment({c076f100-c2f7-43f9-a3f9-51fd33872b94}) already in progress state (AssignmentStateDetecting). No need to evaluate
UpdatesDeploymentAgent 29/09/2014 17:06:31
6032 (0x1790)
Evaluation initiated for (0) assignments. UpdatesDeploymentAgent
29/09/2014 17:06:31 6032 (0x1790)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT START Event
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Suspend activity in presentation mode is selected
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
At least one user has elected to suspend non-business hours activity when in presentation mode. Checking for presentation mode.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Proceeding to non-business hours activites as presentation mode is off.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Auto install during non-business hours is disabled or never set, selecting only scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
A user-defined service window(non-business hours) is available. We will attempt to install any scheduled updates.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Attempting to install 0 updates UpdatesDeploymentAgent
29/09/2014 22:00:00 3240 (0x0CA8)
No actionable updates for install task. No attempt required.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
Updates could not be installed at this time. Waiting for the next maintenance window.
UpdatesDeploymentAgent 29/09/2014 22:00:00
3240 (0x0CA8)
CUpdateAssignmentsManager received a SERVICEWINDOWEVENT END Event
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
No current service window available to run updates assignment with time required = 1
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
Attempting to cancel any job started at non-business hours.
UpdatesDeploymentAgent 30/09/2014 5:00:00
3132 (0x0C3C)
There are several updates found in the assignment (2 in the first, 216 in the second). Some of them are required but still the log says: No actionable updates.
The SERVICEWINDOWEVENT events originate from the business hours set in the client settings I suppose?
But I don't get why the log sais "No current service window available to run updates assignment with time required = 1"
Any advice?
Kind regards,
Bert

Hi,
What's the status in Software Center on clients?
Please check ScanAgent.log, WUAHandler.log, UpdatesHandler.log and Windowsupdate.log on the client to see if there is any helpful information.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

NImax.exe has generated errors. You must restart the program, a log file is being created.

NImax.exe has generated errors. You must restart the program, a log file is
being created.
This error occurs just after bootup, no programs started except windows..
Running Windows 2000 latest version on a brand new computer.
(pent 4 3.0 ghz 500MB ram).
Can anyone help me with this problem? Happened after install Labview 7.0
express. Installed twice and same problem occured with both installs.
Labview 7.0 is the only thing installed right now. Also selected "Visual
Basic Support" install from driver cd's.
One other thing I just noticed. System info reports 2 processors and I
think I only have one.
TIA

Happy update.
After ignoring this problem for awhile and installing some NI DAQ boards,
this problem is not happening anymore.
Would urge NI to investigate further though. Messed me up for a couple of
days, and still don't know why it happened.
Much thanks to those who helped.
JJ
"JJF" wrote in message
news:qB6Hb.48702$VB2.90660@attbi_s51...
> One other point, I found out this is a message generated by drwtsn32. Can
> get rid of the error by unchecking "show visual feedback on errors" box,
but
> don't like that fix. Still need help.
>
> Thanks,
>
> JJ
>
> "JJF" wrote in message
> news:%JRGb.138921$8y1.419649@attbi_s52...
> > Hi Nirmal and all,
> >
> > Happy Holidays to you too, and thanks for the reply.
> >
> > Making progress. Did all the uninstalling and registry editing as you
> > suggested. Also, updated Win2K at Microsoft.com as suggested.
> > Re-installed with default settings of LV express 7.0. Now I only get
> the
> > error when I exit NImax.
> >
> > Also, my p2p home network is not that hot. Have it set up as a
workgroup.
> > Sometimes when I boot up I have file access between the two computers
and
> > sometimes windows explorer can't find the workgroup network path
(between
> > the two computers). Both computers can always access the internet
though.
> > Using a 4 port Linksys cable/dsl router on a cable modem. Using XP
home
> > edition on base computer (the one set up for the isp) and Win2K on the
> other
> > computer.
> >
> > Also, any idea where this log file is going? Thought it was part of the
> > event viewer but the errors in the event viewer don't seem to correspond
> to
> > the NImax.exe logging event now. There is a file in
> > "winnt\sytem32\config\software.log" that seems to change at about the
same
> > time but I can't access the file because it is in use by the system.
> >
> > Using NImax ver 3.02.3005. Do you know if I can download "NI
measurement
> > and automation explorer" and/or the driver cd's from NI.com? Maybe I
have
> a
> > flaky disk or something. I have a feeling it may also have to do with
the
> > "on again/off again" network neighborhood connection problem.
> >
> >
> > Thanks again,
> >
> > JJ
> >
> >
> >
> > "Nirmal Sharma" wrote in message
> > news:506500000005000000AE470100-1068850981000@exchange.ni.com...
> > > Hi,
> > > Happy cristmas & new year for you & ur brand new pc...
> > >
> > > How are you uninstalling & then installing LV in your pc ?
> > >
> > > I suggest to remove complete LV (Remove All option) from your
> > > computer. Once uninstallation is completed, go to windows registry -
> > > by windows start -> run -> regedit -> Enter
> > >
> > > Goto HKEY_LOCAL_MACHINE-> SOFTWARE -> National Instruments - Delete
> > > this folder (National Instruments folder)
> > >
> > > Remove any other foloder/file related to NI's software. Be very
> > > cautious while deleting files from windows registry bcoz wrong file
> > > deletion may hang your whole system.
> > >
> > > Restart your computer..hope it should bootup without any errors.
> > >
> > > Now as answered by Alexander, update windows.
> > >
> > > After updating, bootup your system. If it boots up without any error
> > > message, install LV with the typical (default installation).
> > >
> > > Hope this helps. Your feedbacks are welcome.
> > >
> > > Best Regards,
> > > Nirmal Sharma
> > > India
> >
> >
>
>

Make a log of updates being installed?

Similar Messages

Maybe you are looking for