Make grid script wont work??
i cant seem to make this work - i create a graphic frame but when i double click the make grid script i get this message - what am i missing?
Hi,
Is it modified?
I cant see "alert" part of code on my side (CS5). Script "do nothing" if cant do something.
Paste function main() content here
Jarek
Similar Messages
-
Script wont work after building/burning dvd
Hi everyone,
I have a problem with a HUGE dvd-project I'm working on at the moment. It's a compilation dvd with 50 different short videos and approximately 55 menus. a large part of the 50 videos is connected through the menus with 201 unique buttons.
First I made different stories to be sure the viewer gets directed to the menu he/she came from when a video ends. But because the project became too big (99 tracks and or stories is the maximum) I got into scripting.
I thought I actually managed to write the right scripts, but now it seems that a stand alone dvd-player doesn't recognize the scripts. Every time a video ends or I use the menu button on the remote control the (first) main menu appears.
*So my question for all the friendly folks out there on the other end of the glass fiber-cable is: What can I do to make it work? Is this a problem someone recognizes? Is it my scripting? Is there a way to work around scripting?*
If you need more info please let me know. I wanted to keep it as short as possible at first, but I can elaborate some more if needed.
thanks in advance
ciao!As already said, the pre-scripting is usually the culprit... and as StudioX said, I \did leave much of the detail out in that article, which was intended to build on from other sources, such as the manual!
If you remove the setting which puts the scripts as prescripts, and be explicit with the menu jumps (i.e. write them out in full each time and don't rely on 'current item' and dividing by '32'), then the scripting should work.
Additionally, the script lines you quote in your prescript may not work, depending on where you are in the disc when they are run. The very first script you create will have a value of 63489, which when you divide by 32 gives just over 1984, so will be rounded to either 1984 or 1985. Since this does not equate to any menu item then the jump cannot work, since GPRM3 will never be equal to '1'. As a result the disc reverts to the main menu.
To make this more reliable you need to work out the value of the last item, which if it is track or story 1 will be 49280. Story 2 in track 1 will be 49408, story 3 49536. This continues even if you then go to a new track. Knowing this the maths then to get to a menu is easier.
If you 'get last item' and know that you are coming from a track or story then you can subtract 49280 and divide by 128. If you are on track or story 1 then the result is zero. Otherwise it is going to be 1, 2, 3, etc. If you know which clips you access from each menu then you can add a series of 'if' statements, for example:
Jump menu1 If (GPRM3 <= 20)
Which would mean anything up to your first 20 clips would send you back to menu1.
You can then add in the button jump before this statement and you should be getting closer to what you need. -
Applescript script wont work under Mail's rules
I have an Applescript that works perfectly for replying to certain incoming emails when it is called on manually yet when I try to set it to run automatically as part of Mail's rules in preferences, it just wont run. The other criteria within the same ruel work perfectly. It's just the Applescript that wont function. Any ideas as to what may be impeding it from working ?
there is a known bug in apple script which hangs the script if the a mail rule makes an outgoing message. i submitted a bug report about it a couple of months ago and was told that it's a known issue.
There is a workaround. see the post by Todd laney in [this thread|http://discussions.apple.com/thread.jspa?threadID=1226817&start=0&tstart =0]. -
Automatically open in Preview script wont work on 10.6
Trying to take pictures with an Eye-Fi card and have them automatically open full size in Preview upon uploading. The script I have works just fine for my iMac running 10.5, but not at all on my iMac running 10.6. The script works fine if I physically drag a file into the designated folder, but not it uploaded. Same thing when I make folder action scripts in Automator. Please help. Here is the script:
on adding folder items to this_folder after receiving these_items
-- PROCESS EACH OF THE ITEMS ADDED TO THE ATTACHED FOLDER
repeat with i from 1 to number of items in these_items
set this_item to item i of these_items
tell application "Preview"
activate
open this_item
end tell
end repeat
end adding folder items toDoes it change anything if you write the script as follows?
*on adding folder items to this_folder after receiving these_items*
* tell application "Preview"*
activate
* repeat with this_item in these_items*
* open this_item*
* end repeat*
* end tell*
*end adding folder items to* -
Adobe Flash Player wont work after all steps taken, what haven't I done to make it work?
I tried to play a game I love & I got this message: "To view this page ensure that Adobe Flash Player version 10.0.0 or greater is installed" So I went to your site to update my flash player & hit the "Test Flash Player" button & it came up
like this^^. I went to the suggestions your site provided & went to Manage add-ons to look for Shockwave Flash Object to enable it:
You can see that it is enabled by this picture I have provided. So it also asks me to make sure that ActiveX isn't clicked on & so I did:
As you can see it's turned off & I even tried it the other way where it has the spot checked & it still wont play. So I decided to see if I could reinstall it onto my computer & so in turn I got this message:
That is the message I got even after trying to delete Flash Player & reinstalling it. Now you can see my frustration with all this. Adobe Flash Player wont work after all steps taken, what haven't I done to make it work? I have a Windows 8.1 Pro, I use Internet Explorer which has the latest version on it, which is Windows Explorer 11 Version: 11.0.9600.17498 & I was also under the understanding that I also had the latest version of Adobe Flash Player on this computer as well. Can someone tell me what to do??First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative. -
I need to know how to make greyed out some songs turn bold. I have tried from my itunes library to my ipod but it still wont work. Can anyone help?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Help me to make this script work, please!
function(){
app.findGrepPreferences.firstLineIndent = "8 mm";
app.findGrepPreferences.leftIndent = "8 mm";
app.changeGrepPreferences.firstLineIndent = "8 mm";
app.changeGrepPreferences.leftIndent = "16 mm";
app.selection[0].changeGrep();
app.findGrepPreferences.leftIndent = "16 mm";
app.changeGrepPreferences.leftIndent = "24 mm";
app.selection[0].changeGrep();Hi,
Its already replied, see below code:
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.firstLineIndent = "8 mm";
app.findGrepPreferences.leftIndent = "8 mm";
app.changeGrepPreferences.firstLineIndent = "8 mm";
app.changeGrepPreferences.leftIndent = "16 mm";
app.changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
First run the above code, again you want to change leftIndent from '16 mm' to '24 mm' run below code:
app.findGrepPreferences = app.changeGrepPreferences = null;
app.findGrepPreferences.leftIndent = "16 mm";
app.changeGrepPreferences.leftIndent = "24 mm";
app.changeGrep();
app.findGrepPreferences = app.changeGrepPreferences = null;
by
hasvi -
anyone can help me about my prblem on my iphone 4,.my phone wont receive and make calls..i already did the reset network setting,and off the 3G ..but still wont work..help pls..thks
try easy first. if pre paid make sure you have not ran out of date,might need top up. if on contract check with your provider to see if they have stopped your account, if all fails ring apple
-
HT204053 when i try to make a purchase it saying it wont work and need support to fix it
hello, when i try to make a purchase on any of my apps it wont work and tells me to use this site. i need help
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Am i the only one experiencing hard to send imessage since ios7 updated? I have to reboot my iphone to make it work. Then after sometimes it wont work again.
A search of this forum would have saved you some typing... Yes, solutions offered...
-
Why in Lion can't I make Finder Scripts work e.g. replace text in item names?
I'm trying to manage folders and file in Finder, and I can't get the scripts to work. Do I need to update them? Do I need to ensure they are in the correct folders in the correct library? I've put some effort in to this, but no joy, any advice appreciated. Has anybody else found problems with other scripts?
JAh, I think I've found the solution - I need to use Finder in Columns view, not Browser et.al. Grrr, Apple eccentricities, eh?
-
also, I have to mention I already reinstalled package and nothing works. Help please!
Hi, thanks for getting back. Here is the full content on the window that pops up every time I click on my Word icon: "Microsoft Word cannot be opened because of a problem. Check with the developer to make sure Microsoft Word works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X. Click Report to see more detailed information and send a report to Apple". I reinstalled the application, and everything else is updated, so I am not sure what to do.
-
Mail-form from dB Masters + reCaptcha - Things wont work the way i want.
I used a mail-form from dB Masters because someone here gave me the tip.
And its great! But it uses a simplefied Captcha script.
I tryd to change the code myself and got to this: http://www.wientjesvoegwerk.nl/PHP/form.php
If you try to send mail it wont work.....
form.php
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Email Form</title>
</head>
<body>
<center>
<form id="form" method="post" action="../formmailer.php" enctype="multipart/form-data">
<input type="hidden" name="action" value="verify">
<table cellpadding="4">
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Uw naam:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Naam" value=""/>
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Email:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Email" value="" />
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Telefoonnummer:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<input type="text" name="Telefoonnummer" value="" />
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Onderwerp:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<select name="Onderwerp">
<option value="0">Algemene Informatie</option>
<option value="1">Offerte</option>
<option value="2">Overige</option>
</select>
</td></tr>
<tr><td style="text-align: left;" valign=top><font size="2" FACE="Verdana" color="#000000">Bericht:</font><small><span style="color:#E00000;" title="Required field">*</span></small></td><td align="left">
<textarea name="Bericht" rows="7" cols="40"></textarea>
</td></tr>
<tr><td align=right>CAPTCHA TXT</td>
<td align="left">
<form method="post" action="verify.php">
<?php
require_once('recaptchalib.php');
$publickey = "I hide the key on this forum dont know if its ok to show";
echo recaptcha_get_html($publickey);
?>
</form>
</td>
</tr>
<tr><td></td><td align="left">
<input type="submit" name="submit" value="Submit" />
<input type="reset" name="Reset" value="Clear Form" />
<input type="hidden" name="config" value="0" />
<input type="hidden" name="nospam" value="" />
</td></tr>
</table>
<div style="height:1px; display: none; visibility: hidden;">
<input type="text" name="email">
</div>
</form>
</center>
</body>
</html>
formmailer.php
<?php
// dB Masters' PHP FormM@iler, Copyright (c) 2007 dB Masters Multimedia
// http://www.dbmasters.net/
// FormMailer comes with ABSOLUTELY NO WARRANTY
// Licensed under the AGPL
// See license.txt and readme.txt for details
// General Variables
$check_referrer="no";
$referring_domains="www.wientjesvoegwerk.nl";
// options to use if hidden field "config" has a value of 0
// recipient info
$charset[0]="UTF-8";
$tomail[0]="[email protected]";
$cc_tomail[0]="";
$bcc_tomail[0]="";
// Mail contents config
$subject[0]="Onderwerp van de Email";
$reply_to_field[0]="Email";
$reply_to_name[0]="Naam";
$required_fields[0]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
$required_email_fields[0]="Email";
$attachment_fields[0]="";
$return_ip[0]="yes";
$mail_intro[0]="Er is een bericht gestuurd vanuit Wientjesvoegwerk.nl:";
$mail_fields[0]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
$mail_type[0]="text";
$mail_priority[0]="1";
$allow_html[0]="no";
// Send back to sender config
$send_copy[0]="yes";
$copy_format[0]="vert_table";
$copy_fields[0]="Naam,Onderwerp,Bericht";
$copy_attachment_fields[0]="";
$copy_subject[0]="Kopie van uw bericht naar Wientjesvoegwerk.nl";
$copy_intro[0]="Dank u voor uw bericht!<br />Om veiligheidsredenen is uw email adres en telefoonnummer niet in deze mail te zien.<br /> Het volgende is verstuurd;";
$copy_from[0]="[email protected]";
$copy_tomail_field[0]="Email";
// Result options
$header[0]="";
$footer[0]="";
$error_page[0]="";
$thanks_page[0]="";
// Default Error and Success Page Variables
$error_page_title[0]="Errors:";
$error_page_text[0]="Ga a.u.b. terug naar de vorige pagina om alle benodigde velden in te vullen.";
$thanks_page_title[0]="Bericht verzonden.";
$thanks_page_text[0]="Dank u voor uw bericht!";
// Antispam Options
$empty_field[0]="nospam";
$character_scan[0]="Bericht,Naam,Email,Telefoonnummer,Onderwerp";
$time_delay[0]="2";
$captcha_codes[0]="9C2449,EEADC8,77A585,D72838";
$max_urls[0]="2";
$max_url_fields[0]="Bericht";
$flag_spam[0]="";
// options to use if hidden field "config" has a value of 1
// recipient info
$charset[1]="";
$tomail[1]="";
$cc_tomail[1]="";
$bcc_tomail[1]="";
// Mail contents config
$subject[1]="";
$reply_to_field[1]="";
$reply_to_name[1]="";
$required_fields[1]="";
$required_email_fields[1]="";
$attachment_fields[1]="";
$return_ip[1]="";
$mail_intro[1]="";
$mail_fields[1]="";
$mail_type[1]="";
$mail_priority[1]="";
$allow_html[1]="";
// Send back to sender config
$send_copy[1]="";
$copy_format[1]="";
$copy_fields[1]="";
$copy_attachment_fields[1]="";
$copy_subject[1]="";
$copy_intro[1]="";
$copy_from[1]="";
$copy_tomail_field[1]="";
// Result options
$header[1]="";
$footer[1]="";
$error_page[1]="";
$thanks_page[1]="";
// Default Error and Success Page Variables
$error_page_title[1]="";
$error_page_text[1]="";
$thanks_page_title[1]="";
$thanks_page_text[1]="";
// Antispam Options
$empty_field[1]="bait";
$character_scan[1]="Naam,Email,Telefoonnummer,Onderwerp,Bericht";
$time_delay[1]="";
$captcha_codes[1]="";
$max_urls[1]="";
$max_url_fields[1]="";
$flag_spam[1]="";
// Don't muck around past this line unless you know what you are doing //
ob_start();
$config=$_POST["config"];
$debug=0;
$debug_text="";
// fix for Windows email server security
ini_set("sendmail_from",$tomail[$config]);
// email validation regular expression
$regex = "^[-a-z0-9!#$%&\'*+/=?^_`{|}~]+(\.[-a-z0-9!#$%&\'*+/=?^_`{|}~]+)*@(([a-z0-9]([-a-z0-9]*[a-z0-9]+)?){1,63}\.)+([a-z]([-a-z0-9]*[a-z0-9]+)?){2,63}$";
$header_injection_regex = "(\r|\n)";
if($header[$config]!="")
include($header[$config]);
if($_POST["submit"] || $_POST["Submit"] || $_POST["submit_x"] || $_POST["Submit_x"])
// begin global functions //
// get visitor IP
function getIP()
if(getenv(HTTP_X_FORWARDED_FOR))
$user_ip=getenv("HTTP_X_FORWARDED_FOR");
else
$user_ip=getenv("REMOTE_ADDR");
return $user_ip;
// get value of given key
function parseArray($key)
$arrayvalue=$_POST[$key];
$count=1;
extract($array_value);
foreach($array_value as $part_value)
if($count > 1){$value.=", ";}
$value.=$part_value;
$count=$count+1;
return $value;
// stripslashes and autolink url's
function parseValue($value)
$value=preg_replace("/(http:\/\/+.[^\s]+)/i",'<a href="\\1">\\1</a>', $value);
return $value;
// html header if used
function htmlHeader()
$htmlHeader="<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\">\n<html>\n<head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=".$charset[$config]."\"></head>\n<body>\n<table cellpadding=\"2\" cellspacing=\"0\" border=\"0\" width=\"600\">\n";
return $htmlHeader;
// html footer if used
function htmlFooter()
$htmlFooter="</table>\n</body>\n</html>\n";
return $htmlFooter;
// build verticle table format
function buildVertTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
if($intro != "")
$message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"2\">".$intro."</td>\n</tr>\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$curvalue=$_POST[$cur_key];
if(is_array($cur_value))
$curvalue=parseArray($cur_key);
$curvalue=parseValue($cur_value);
if($allow_html[$config]=="no")
$curvalue=htmlspecialchars(nl2br($cur_value));
else
$curvalue=nl2br($cur_value);
$message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$cur_value."</td>\n</tr>\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$user_ip."</td>\n</tr>\n";
$message.=htmlFooter();
return $message;
// build horizontal table format
function buildHorzTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
if($intro != "")
$message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"".$run."\">".$intro."</td>\n</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n";
if($send_ip=="yes" && $to=="recipient")
$message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$curvalue=$_POST[$cur_key];
if(is_array($cur_value))
$curvalue=parseArray($cur_key);
$curvalue=parseValue($cur_value);
if($allow_html[$config]=="no")
$curvalue=htmlspecialchars(nl2br($cur_value));
else
$curvalue=nl2br($cur_value);
$message.="<td align=\"left\" valign=\"top\">".$cur_value."</td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="<td align=\"left\" valign=\"top\">".$user_ip."</td>\n";
$message.="</tr>\n";
$message.=htmlFooter();
return $message;
// build plain text format
function buildTextTable($fields, $intro, $to, $send_ip)
$message="";
if($intro != "")
$message.=$intro."\n\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$curvalue=$_POST[$cur_key];
if(is_array($cur_value))
$curvalue=parseArray($cur_key);
$curvalue=parseValue($cur_value);
if($allow_html[$config]=="no")
$curvalue=htmlspecialchars($cur_value);
else
$curvalue=$cur_value;
$message.="".$cur_key.": ".$cur_value."\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="Sender IP: ".$user_ip."\n";
return $message;
// get the proper build fonction
function buildTable($format, $fields, $intro, $to, $send_ip)
if($format=="vert_table")
$message=buildVertTable($fields, $intro, $to, $send_ip);
else if($format=="horz_table")
$message=buildHorzTable($fields, $intro, $to, $send_ip);
else
$message=buildTextTable($fields, $intro, $to, $send_ip);
return $message;
// referrer checking security option
function checkReferer()
if($check_referrer=="yes")
$ref_check=preg_split('/,/',$referring_domains);
$ref_run=sizeof($ref_check);
$referer=$_SERVER['HTTP_REFERER'];
$domain_chk="no";
for($i=0;$i<$ref_run;$i++)
$cur_domain=$ref_check[$i];
if(stristr($referer,$cur_domain)){$domain_chk="yes";}
else
$domain_chk="yes";
return $domain_chk;
// checking required fields and email fields
function checkFields($text_fields, $email_fields, $regex)
$error_message="";
if($debug==1)
$error_message.="<li>text_fields: ".$text_fields."<br />email_fields: ".$email_fields."<br />reply_to_field: ".$reply_to_field."<br />reply_to_name: ".reply_to_name."</li>";
if($text_fields != "")
$req_check=preg_split('/,/',$text_fields);
$req_run=sizeof($req_check);
for($i=0;$i<$req_run;$i++)
$cur_field_name=$req_check[$i];
$cur_field=$_POST[$cur_field_name];
if($cur_field=="")
$error_message.="<li>You are missing the <b>".$req_check[$i]."</b> field</li>\n";
if($email_fields != "")
$email_check=preg_split('/,/',$email_fields);
$email_run=sizeof($email_check);
for($i=0;$i<$email_run;$i++)
$cur_email_name=$email_check[$i];
$cur_email=$_POST[$cur_email_name];
if($cur_email=="" || !eregi($regex, $cur_email))
$error_message.="<li>You are missing the <b>".$email_check[$i]."</b> field or it is not a valid email address.</li>\n";
return $error_message;
// attachment function
function getAttachments($attachment_fields, $message, $content_type, $border)
$att_message="This is a multi-part message in MIME format.\r\n";
$att_message.="--{$border}\r\n";
$att_message.=$content_type."\r\n";
$att_message.="Content-Transfer-Encoding: 7bit\r\n\r\n";
$att_message.=$message."\r\n\r\n";
$att_check=preg_split('/,/',$attachment_fields);
$att_run=sizeof($att_check);
for($i=0;$i<$att_run;$i++)
$fileatt=$_FILES[$att_check[$i]]['tmp_name'];
$fileatt_name=$_FILES[$att_check[$i]]['name'];
$fileatt_type=$_FILES[$att_check[$i]]['type'];
if (is_uploaded_file($fileatt))
$file=fopen($fileatt,'rb');
$data=fread($file,filesize($fileatt));
fclose($file);
$data=chunk_split(base64_encode($data));
$att_message.="--{$border}\n";
$att_message.="Content-Type: {$fileatt_type}; name=\"{$fileatt_name}\"\r\n";
$att_message.="Content-Disposition: attachment; filename=\"{$fileatt_name}\"\r\n";
$att_message.="Content-Transfer-Encoding: base64\r\n\r\n".$data."\r\n\r\n";
$att_message.="--{$border}--\n";
return $att_message;
// function to set content type
function contentType($charset, $format)
if($format=="vert_table")
$content_type="Content-type: text/html; charset=".$charset."\r\n";
else if($format=="horz_table")
$content_type="Content-type: text/html; charset=".$charset."\r\n";
else
$content_type="Content-type: text/plain; charset=".$charset."\r\n";
return $content_type;
// end global functions //
// begin procedural scripting //
// anti-spam empty field check
if($_POST[$empty_field[$config]] != "")
$empty_message = "<li>This submission failed and was flagged as spam.</li>\n";
// anti-spam character scan check
if(strlen($character_scan[$config]) > 0)
$spam_message="";
$field_check=preg_split('/,/',$character_scan[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
$cur_field_name=$field_check[$i];
$cur_field=$_POST[$cur_field_name];
if(preg_match("/<(.|\n)+?>/", $cur_field) || preg_match("/\[(.|\n)+?\]/", $cur_field))
$spam_message.="<li>This message contains disallowed characters.</li>\n";
// anti-spam time delay check
if((strlen($time_delay[$config]) > 0 && strlen($_POST["time"]) > 0) || (strlen($time_delay[$config]) > 0 && (strlen($_POST["time"]) == 0 || !$_POST["time"])))
if((time() - $_POST["time"]) < $time_delay[$config])
$time_message = "<li>This has been stopped by the timer, and is likely spam.</li>\n";
// anti-spam CAPTCHA check
if(strlen($captcha_codes[$config]) > 0)
$captcha_check=preg_split('/,/',$captcha_codes[$config]);
if(strtolower($_POST["captcha_entry"]) != strtolower($captcha_check[$_POST["captcha_code"]]))
$captcha_message = "<li>CAPTCHA test did not match.</li>\n";
// anti-spam max URL check
if(strlen($max_url_fields[$config]) > 0)
$max_url_message="";
$field_check=preg_split('/,/',$max_url_fields[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
$cur_field_name=$field_check[$i];
$cur_field=$_POST[$cur_field_name];
preg_match_all("/http:/", $cur_field, $matches);
if(count($matches[0]) > $max_urls[$config])
$max_url_message.="<li>This message contains too many URL's.</li>\n";
// set anti-spam flagging option
if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) == 0)
$set_flag = 2;
else if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) > 0)
$set_flag = 1;
else
$set_flag = 0;
// header injection check
$security_filter="";
if(strlen($_POST[$reply_to_field[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_field[$config]]))
$security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
$reply_to_field_checked=$_POST[$reply_to_field[$config]];
if(strlen($_POST[$reply_to_name[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_name[$config]]))
$security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
$reply_to_name_checked=$_POST[$reply_to_name[$config]];
// check domain referrer and continue
$domain_chk=checkReferer();
if($domain_chk=="yes")
$error_message=checkFields($required_fields[$config], $required_email_fields[$config], $regex);
if(strlen($error_message) < 1 && strlen($security_filter) < 1 && $set_flag < 2)
// build appropriate message format for recipient
$content_type=contentType($charset[$config], $mail_type[$config]);
$message=buildTable($mail_type[$config], $mail_fields[$config], $mail_intro[$config], "recipient", $return_ip[$config]);
// build header data for recipient message
//$extra="From: ".$_POST[$reply_to_field[$config]]."\r\n";
$extra="From: ".$reply_to_name_checked." <".$reply_to_field_checked.">\r\n";
if($cc_tomail[$config]!="")
$extra.="Cc: ".$cc_tomail[$config]."\r\n";
if($bcc_tomail[$config]!="")
$extra.="Bcc: ".$bcc_tomail[$config]."\r\n";
if($mail_priority[$config]!="")
$extra.="X-Priority: ".$mail_priority[$config]."\r\n";
// get attachments if necessary
if($attachment_fields[$config]!="")
$semi_rand=md5(time());
$border="==Multipart_Boundary_x{$semi_rand}x";
$extra.="MIME-Version: 1.0\r\n";
$extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
$message=getAttachments($attachment_fields[$config], $message, $content_type, $border);
else
$extra.="MIME-Version: 1.0\r\n".$content_type;
// send recipient email
if($debug==1)
if($set_flag == 1)
$debug_text.="<p><b>Mail would have sent flagged for spam if not in debug mode.</b></p>";
else
$debug_text.="<p><b>Mail would have sent if not in debug mode.</b></p>";
else if($debug==0)
if($set_flag == 1)
$subject = $flag_spam[$config]." ".$subject[$config];
else
$subject = $subject[$config];
mail("".$tomail[$config]."", "".stripslashes($subject)."", "".stripslashes($message)."", "".$extra."");
// autoresponse email if necessary
if($send_copy[$config]=="yes")
// build appropriate message format for autoresponse
$content_type=contentType($charset[$config], $copy_format[$config]);
$message=buildTable($copy_format[$config], $copy_fields[$config], $copy_intro[$config], "autoresponder", $return_ip[$config]);
// build header data for autoresponse
$copy_tomail=$_POST[$copy_tomail_field[$config]];
$copy_extra="From: ".$copy_from[$config]."\r\n";
// get autoresponse attachments if necessary
if($copy_attachment_fields[$config]!="")
$semi_rand=md5(time());
$border="==Multipart_Boundary_x{$semi_rand}x";
$copy_extra.="MIME-Version: 1.0\r\n";
$copy_extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
$message=getAttachments($copy_attachment_fields[$config], $message, $content_type, $border);
else
$copy_extra.="MIME-Version: 1.0\r\n".$content_type;
// send autoresponse email
if($debug==1)
if($set_flag == 1)
$debug_text.="<p><b>Autoresponder would have sent flagged for spam if not in debug mode.</b></p>";
else
$debug_text.="<p><b>Autoresponder would have sent if not in debug mode.</b></p>";
else if($debug==0)
$send_copy = 1;
if($copy_tomail=="" || !eregi($regex,$copy_tomail))
$send_copy = 0;
if($send_copy == 1)
if($set_flag == 1)
$copy_subject = $flag_spam[$config]." ".$copy_subject[$config];
else
$copy_subject = $copy_subject[$config];
mail("$copy_tomail", "".$copy_subject."", "$message", "$copy_extra");
// showing thanks pages from a successful submission
if($thanks_page[$config]=="")
echo "<h3>".$thanks_page_title[$config]."</h3>\n";
echo "<p>".$thanks_page_text[$config]."</p>\n";
if(strlen($debug_text) > 0)
echo "<p><b><i>".$debug_text."</i></b></p>\n";
else
header("Location: ".$thanks_page[$config]);
else
// entering error page options from missing required fields
if($error_page[$config]=="")
echo "<h3>".$error_page_title[$config]."</h3>\n";
echo "<ul>\n";
echo $security_filter.$empty_message.$error_message.$spam_message.$time_message.$captcha_message.$max_url_message;
echo "</ul>\n";
echo "<p>".$error_page_text[$config]."</p>\n";
else
header("Location: ".$error_page[$config]);
else
echo "<h3>".$error_page_title[$config]."</h3>\n";
// message if unauthorized domain trigger from referer checking option
echo "<p>Sorry, mailing request came from an unauthorized domain.</p>\n";
// end procedural scripting //
else
echo "<h3>Error</h3>";
echo "<p>No form data has been sent to the script</p>\n";
if($footer[$config]!="")
include($footer[$config]);
ob_end_flush();
?>
verify.php
<?php
require_once('recaptchalib.php');
$privatekey = "i hide this on the forum";
$resp = recaptcha_check_answer ($privatekey,
$_SERVER["REMOTE_ADDR"],
$_POST["recaptcha_challenge_field"],
$_POST["recaptcha_response_field"]);
if (!$resp->is_valid) {
// What happens when the CAPTCHA was entered incorrectly
die ("The reCAPTCHA wasn't entered correctly. Go back and try it again." .
"(reCAPTCHA said: " . $resp->error . ")");
} else {
// Your code here to handle a successful verification
?>
We have a saying in the Netherlands; "Not being abled to see the tree's trough the forest"
Well i dont see it anymore...
I managed to get it in the code but it doesnt work.
I hope someone can help me out!@Nancy O.
Thanks for your support i appreciate it that you helped me out a many times.
However i have read all of the topics you posted.
I know in the mail form i can disable the "sort of Captcha". I wanted to disable it and insert reCaptcha instead.
I will re-make the form because like you said (and i already figured it out myself) ;
"b) Don't modify forms until you get a very basic form working on your server."
And youre right, im taking too much work at once.
@CowboyInAZ
Im a hobbyist that learns really really fast.
Before March 23 i never used CSS, Javascript and XHTML. And never combined them all together with PHP. (never ever created a php based file from scratch)
The reason why i use other persons code is because i learn faster with examples, and because i dont need to reinvent the wheel if someone already invented it. The only thing i do with it is learn the workings, customise it and at last, rewrite the code when i understand it.
If you look at my current site: http://www.wientjesvoegwerk.nl/
You will notice that the site is validated by W3C with no errors and warnings.
I think it was Nancy O. that gave me the link to the validator. Thats how i discovered the service.
You need to know that in 1 day (from 63 errors and 12 warnings) i removed all errors. And i didnt knew much about it, and why errors happend while the site looks fine.
So im just curious how things work and thats why i "steal" codes and adjust them to learn myself.
I also want a education like you spoke of, but im interested in a different media.
I want to be abled to create my dream project wich involves new ways for game studios to earn money.
This is just a simple start, im also taking tutorials in C#, C++. -
Safari 3.0.4 with upgrade to 10.4.11 wont work, please help me
I am just beside myself. Safari wont work. I have broadband and all is well there with comcast, I've run disk warrior, all is well there. I've run disk first aid to check and verify disk. All well there. I upgraded to OS 10.4.11 from Upgrade on my g5, and safari wont load its face page; it just hangs pale blue highlight over half of this phrase "Go to this address." It wont go to any addy or bookmark I click on. It is like a dead thing
I have tried everything I know. I am just so disappointed in apple. So not understanding what to do. I am not computer saavy and this is such a disaster; this is my computer for my work; I'm a work at home mom.
Please can anyone help me? I read people saying third party things, but I do not know what they mean or what those 3rd party things are by name.
I'm sorry to go and on, I am just so upset, and could kick myself for being so naive about thinking oh, a nice upgrade, no problem
Lost an entire day of work today trying to solve this to no avail.
Thank you if you can help me.
sigh
sincerely
kuboh my, thank you
there are many many app supports listed in the applications support folders. Some have zero items, some have several. Where do I start? I used command+I to see info, but for some reason each folder doesnt have info, just date created and modified, and no version number either.
I'll list those folders if that would help. I am sorry if I am taking too much of anyone's time. I cannot tell whichi is what. of there are 3rd party safari add-ins in the folowing?. But, you are a great help in my learning
In the Applications Support Folder are these folders:
4D
Adobe
Aperture
Apple
ArtRage 2
Backup
Belight Software
BoomerangDR
Canon
Epson Scanner Module
Expression Media
FLEXnet Publisher
Garageband
Graphic Converter
hp
iDVD
iMoveie
iSlayer
iView
LGOSystems
Macromedia
MindVision
Mozilla
NetServices
Nikon
Norton SOlutions Support
NoteBook
OmniOUtliner 3
Otherwise
Palm HotSync
PDF Clerk
ProApps
Script Software
Stone
SubRosa Soft
SyncService
The New Yorker
words
Xcode
Znippetizer
Some of these, most of them, I have no idea what they are. I dont have a Nikon anything; tho one printer I have is a canon, and one is an hp. The New Yorker is I think a large pdf file of images from a commercial New Yorker disk. THe others I am not sure. Some have files inside the folders, some have 0 items.
Also, you mentioned Input Manager: This is what is in that folder:
Menu Extra Enabler
PicLens
Do you thnk any of these qualify as 3rd party Safari related add-ons?
If they are, then I figure out who made them and then find their website and if they have upgrade for safari 3.0.4 (or is it to match OS 10.4.11?) then I upgrade, but if the maker has no upgrade, then I trash the old item?
Thank you if you can help me again. I truly appreciate the very clear instruction on WHERE to find the things you mentioned.
with kindest regards,
kub -
Script that worked in CS does not work in CS4 - multiple open page, print , pdf export and close
I had a script that worked great for me in Indesign CS. But now does not work in CS4. Anyone knows what needs to be done to make it work again ?
When I drop folder with indesign files on top of this script:
1. opens first page
2. turns specific layer on
3. prints using preset
4. exports using preset
5. close without saving
6. next page
Anyone who can give me solution or idea how this should work is greatly appreciated.
on open sourceFolders
repeat with sourceFolder in sourceFolders
tell application "Finder"
try
-- If you would like to include subfolders, you say - every file of entire contents of folder…
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias list
on error -- work around bug if there is only one file
set idFiles to (every file of folder sourceFolder whose file type is "IDd5") as alias as list
end try
end tell
if idFiles is not {} then
tell application "Adobe InDesign CS4"
set user interaction level to never interact
repeat with i from 1 to count of idFiles
open item i of idFiles
tell document 1
try
set visible of layer "ImagesTag_Layer" to true
end try
set myPreset to "letter size" -- name of print style to use
with timeout of 700 seconds
print using myPreset without print dialog
end timeout
set myPreset1 to "pdf preset name" -- name of pdf export style to use
set myName to the name -- name includes .indd should remove at some point
with timeout of 700 seconds
export format PDF type to "users:temp:Desktop:pdf:" & myName & ".pdf" using myPreset1 without showing options -- set path here format ComputerName:Folder1:Folder2:......:FileName.pdf
end timeout
close without saving
end tell
end repeat
set user interaction level to interact with all
end tell
end if
return 10 -- try again in 10 seconds
end repeat
end open(Disclaimer: me not an AS guy!)
First thing I noticed is the interaction level is set off. If you comment out this line
set user interaction level to never interact
you might be able to pinpoint the exact error -- ID will display a standard "failed" dialog, hopefully showing the line that it fails on.
A quick question: the script assumes two presets in your InDesign: one for print ("letter size") and one for PDFs ("pdf preset name"):
set myPreset to "letter size" -- name of print style to use
set myPreset1 to "pdf preset name" -- name of pdf export style to use
Do these actually exist in your CS4, with the same (non)capitalization and spaces?
Maybe you are looking for
-
Can you select or disable AppleTV's audio output?
I have my AppleTV connected to the television via HDMI and also connected to an amplifier via optical audio. I would like to disable the HDMI audio output as to not have the sound play through the television, but it does not appear to be configurable
-
How can i show pdf in my web application?
if the pdf (or else) file is under web content folder is simple, i can make a link to the resource, but if is it out of the .war file i deployed?? I know I set a outside folder in web server classpath, so i can get URL and then the InputStream from t
-
Can I add the NY Times crossword puzzle app to Safari?
I have been trying to figure out how to install the New York Times crossword puzzle application, Across Lite v2.0, with no luck. Is there a way to add this plug-in to Safari? Im using Safari 1.3.1 on a PB G4 running OS X 10.3.9. Thanks in advance fo
-
Ability to replace image in PDF through Reader, is it possible?
I was told that LiveCycle is what I need to create a PDF with this ability. Im creating a general flyer where the client wants to be able to replace the name, phone, and headshot with new people when they come on board. The text part I can do but d
-
Auditing all page privileges across the portal
Our Portal intranet has hundreds of pages all with differing access requirements. It is necessary to be able to audit what pages have what group access at what privilege level. Is there a way I can do this via a built in Portlet, report or piece of S