Make IBAN field necessary for vendor master

Hi SAP gurus,
is there any way to make IBAN field in bank details necessary for vendor master?
I have tryed with SAPMF02K - EXIT_SAPMF02K_001 but there isn' t a iban filed.
thx in advances
V.
Moderator: Double-post

Dear all,
no unfortunately you can not set up this in field status.
It is possible as a workaround to use 'Bank Details' as mandatory in
OBD3.
This is possibly because IBAN can not be entered alone without the
traditional Bank Details. However, once you have entered the
traditional bank information, it is not possible to set the IBAN as a
mandatory field.
If I were you I'd have a look at user exit and SAPMF02K to
check the vendor master data.
You have also BTEs:
00001440 VENDOR MASTER DATA: Final checks
I hope it helps You.
mauri

Similar Messages

Table for field settings for vendor master

Dears,
Can you please let me know which table do i need to refer if I want to know which fields are maintained mandatory, optional, suppres for Vendor master for each account groups.
I have looked into table T077K, but the table values are showing for example ..................................... How to conclude with these values.
Please suggest.
Regards
Kamesh

Hi
fiedl selection for vendor Mastr depend upon Vendor account gruop there you can fied out which field is optiona or dispaly like wise
check following link
You maintain the account groups in Customizing for Logistics General under Business Partners - Vendor - Control - Define Account Groups and Field Selection (Vendor).
[http://help.sap.com/saphelp_470/helpdata/en/75/ee0b1c55c811d189900000e8322d00/content.htm]
Regards
Kailas Ugale

Field selection for vendor master

Hello Gurus,
Is it possilbe to make a particular field as mandatory in vendore master for a purchase organization 1000 and plant 2000.
If yes, then how?
VM
Edited by: V M on Jul 5, 2011 2:06 PM

Hi,
If both purchasing organizations have separate account group then you can very well achieve in customizing otherwise you need to control it in exit SAPMF02K
Regards
Melih

Report for vendor master changes

Good day,
Please can you assist with this issue,
Report S_ALR_87012089,program RFKABL00
Version ECC 6.0
This report does not reflect the old and the new values for changed bank details.
It does not show anything under the old value and shows **deleted** and **created** for new values.
Thanks in advance

You will have to do configuration in T Codes OBAT and OBAU to achieve what you want in the report.
Check the IMG activity documentation for the following.
SPRO -> IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Vendor Accounts -> Master Records -> Preparations for Changing Vendor Master Records -> Define Field Groups for Vendor Master Records.
SPRO -> IMG -> Financial Accounting -> Accounts Receivable and Accounts Payable -> Vendor Accounts -> Master Records -> Preparations for Changing Vendor Master Records -> Group Fields for Vendor Master Records.
Also read the RFKABL00 program documentation.

Obligatory fields "iban" and "swift" in vendor master data creation

Hi,
I need a way to get obligatory iban and swift in vendor master data.
I need to check if iban and swift have been filled during creation or modification of a vendor (transactions XK01, MK01, FK01,XK02, MK02, FK02 ).
In user-exit ZXF05U01(function EXIT_SAPMF02K_001) I can't check iban and swift fields.
Do you know another way to solve my issue?
Thanks in advance. Stefano.

Hi Stefano,
swift codes are data from financial institute (and not vendor data). So try exit (CMOD) SAPLBANK (but I dont no if it will work!).
As i remember (at time iban where introduced), there was an exit to check consistency (mean "rules") to propose/create iban from account no of vendor. But i cant remember the name of this exit, so you may search in sap notes for this exit.
Best regards,
Christian

Solved - Group Fields for Vendor Master Records in IMG

This was the solution.
The new field's data element I added to LFB1 did not have the "change document" field checked. I made that change and now that field shows up in IMG.
Hello all,
I added an append structure to the table LFB1. This structure has 1 field. I then created a "Modification-Free Enhancement of Vendor Master Record" to add the new LFB1 field to the vendor master screen, edit and display screens. This is the 3rd time I have done this. So far so good.
Now our functional analyst went into IMG to add this new LFB1 field to a "Group Fields for Vendor Master Records" which we have done 2 other times.
The new LFB1 field does not show up in the list of possible Table-fields.
There must be some other step I am missing.
Does any of this ring a bell? We are on version 4.7.
Thanks
Bruce
p.s.
This is the IMG path for adding 'Field Groups' to vendor master fields.
Financial Accounting/
Accounts Receivable and Accounts Payable/
Vendor Accounts/
Master Data/
Preparations for Creating Vendor Master Data/
Group Fields for Vendor Master Records
Edited by: Bruce Tjosvold on Nov 21, 2008 1:18 PM

Hi Vandana,
There are several tables that are contain Vendor Master related data which can be used for extraction to BW. Some of the tables which can be useful for you are:
LFA1 : Vendor Master (General Section)
LFM1 : Vendor master record purchasing organization data
LFBW : Vendor master record (withholding tax types) X
WYT3 : Partner Functions
LFBK : Vendor Master (Bank Details)
LFB1: Vendor Master (Company Code)
ADRC: Addresses (Business Address Services)
ADR3: Fax Numbers (Business Address Services)
ADR6: SMTP Numbers (Business Address Services)
ADRT: Communication Data Text (Business Address Services)
You may use the Data sources mentioned in the previous update from Venky above namely :
0VENDOR_ATTR --- for master data attributes
0VENDOR_TEXTS -- For texts
Since the fields that you are using are from different tables so its better if you go for a Generic Data source where you can use the fields as per your requirement.
Thanks
Pawan
Edited by: pawan190187 on Aug 19, 2011 12:40 PM

Is it have some User exits for Vendor master trigger when click some field

Dear Experts,
I would like to know Is it have User exit for Vendor master trigger when click some field in Vendor master? not just User exit for Prior Save . Please kindly let me know some solution for this case.
Many thank.

Hi,
check may this bapi will be useful your requirements, BAPI_VENDOR_CREATE
below links may helpful for you:
BADI http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm http://support.sas.com/rnd/papers/sugi30/SAP.ppt http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm http://members.aol.com/_ht_a/skarkada/sap/ http://www.ct-software.com/reportpool_frame.htm http://www.saphelp.com/SAP_Technical.htm http://www.kabai.com/abaps/q.htm http://www.guidancetech.com/people/holland/sap/abap/ http://www.planetsap.com/download_abap_programs.htm http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm USER EXIT http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sapgenie.com/abap/code/abap26.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction http://www.easymarketplace.de/userexit.php http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sappoint.com/abap/userexit.pdfUser-Exit http://www.sap-img.com/ab038.htm http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm http://www.sap-img.com/abap/what-is-user-exits.htm http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html Rewards if useful......... Minal
still if you not find any solution go for custom exit, means in standard program only ABAP consultant change the program where you required, it is little risk, you have to do the more testing for this
BR:
Venkat.Gurram

Working on IDOC OUTBOUND FOR Vendor Master and Customer Master

Hi Group,
I need to create IDOC's for Vendor master and customer master using ALE. Whenever they create vendor/customer or changes to vendor/customer should create IDOC's.
Can anyone please help me out how to proceed? I know that we can use CREMAS/DEBMAS and CREMAS04/CREMAS...But I would like to know how to use those.
Thank-You,
Venky

Hi Sai,
Welcome to group.
Related to CREMAS/DEBMAS, for your situation, you can use the change pointers. With this, when ever there is an change/create, it will create an entry in CDHDR & CDPOS and based on that it will create the IDOCs for these.
Activate the change pointers for these message types and run the application RBDMIDOC periodically (whenever you want). This application will create the IDOCs based on your entries.
To activate the change pointers, the TCODEs are
BD50 Checking change pointer is activated for Message Type
BD52 Checking which fields are configured change pointer to create. (please make sure, an entry will exist in BDCP table)
I hope you know the remaining configuration related to partner profile entries (WE20) i.e. to which system you want to send the idocs and Inbound or Outbound etc.
Let me know if you need further info.
shylesh

Upload program for vendor master

Hi Friends,
Could you please help me in this.
actually i have a program like this:
i have to download the data from an excel sheet and reformat it and output into a text file so that the data can be uploaded into vendor master using standard progarm
<b>"RFBIKR00".</b>
i have written the program like this:
but in the middle when formatting the data...i'm facing the problem....
plz help me in solving that...
thnx very very much...........
the program i wrote is like this:
<b>
tables: lfa1,
        lfb1,
        lfm1,
        lfbk,
        bnka,
        bgr00,
        blf00,
        blfa1,
        blfb1,
        blfbk,
        blfm1,
        blfb5,
        blfbw,
        blfei,
        blfza,
        blflr,
        blfm2,
        bwyt3,
        bwyt1,
        blfat.
*--- Internal table for spread sheet.
data: t_filedata like alsmex_tabline occurs 0 with header line.
*--- Internal table for Vendor Master Data in Spread Sheet.
data: begin of t_sheet occurs 0,
        name1 like lfa1-name1,           "vendor name1
        name2 like lfa1-name2,           "vendor name2
        altkn like lfb1-altkn,           "previous master record number
        bukrs like lfb1-bukrs,           "company code
        ekorg like lfm1-ekorg,           "purchase organization
        ktokk like lfa1-ktokk,           "account group
        stras like lfa1-stras,           "street
        street4 like lfa1-name4,         "street4
        pfach like lfa1-pfach,           "po box
        ort01 like lfa1-ort01,           "city
        regio like lfa1-regio,           "region
        pstlz like lfa1-pstlz,           "postal code
        land1 like lfa1-land1,           "country
        telf1 like lfa1-telf1,           "first telephone number
        telfx like lfa1-telfx,           "first fax number
        stcd1 like lfa1-stcd1,           "fed tax ID#
        brsch like lfa1-brsch,           "commodity code
        akont like lfb1-akont,           "reconciliation account
        mindk like lfb1-mindk,           "monitory indicator
        zwels like lfb1-zwels,           "payment method
        reprf like lfb1-reprf,           "check double invoice
        banka like bnka-banka,           "bank name
        stret like bnka-stras,           "house number and street
        city like bnka-ort01,           "city
        provz like bnka-provz,           "bank state
        banks like lfbk-banks,           "bank country
        swift like bnka-swift,           "swift code
        bankl like lfbk-bankl,           "aba#
        bankn like lfbk-bankn,           "bank account no
        zterm like lfb1-zterm,           "payment terms
        terms like lfm1-zterm,           "terms of payment key
      end of t_sheet.
*--- Internal table for Vendor Master data in Text File.
data: begin of t_file occurs 0,
        s_session type bgr00,
        s_header type blf00,
        s_blfa1   type blfa1,
        s_blfb1   type blfb1,
        s_blfbk   type blfbk,
        s_blfm1   type blfm1,
        s_blfbk   type blfbk,
        s_blfb5   type blfb5,
        s_blfza   type blfza,
        s_blfm1   type blfm1,
        s_blfat   type blfat,
        s_bwyt1   type bwyt1,
        s_bwyt3   type bwyt3,
        s_blfm2   type blfm2,
        s_blfei   type blfei1,
        s_blfbw   type blfbw,
        s_blflr   type blflr,
     end of t_file.
                   SELECTION SCREEN                          *****
*---Selection Parameters.
selection-screen begin of block b1 with frame title title1.
parameters: p_xlfile like rlgrap-filename.
parameters: p_txfile type rlgrap-filename.
selection-screen end of block b1.
                   INITIALIZATION                            *****
initialization.
*---Initialize text fields for selection-screen.
title1 = 'Selection Parameters'.
                   AT SELECTION-SCREEN                       *****
at selection-screen.
at selection-screen on p_xlfile.
   perform check_file using p_xlfile.
at selection-screen on value-request for p_xlfile.
   perform select_file using p_xlfile.
                   START-OF-SELECTION                        *****
start-of-selection.
   clear t_sheet.
   refresh t_sheet.
*---Upload Spreadsheet.
   perform read_file using p_xlfile.
*---Process data into formatted internal table.
   perform format_data.
        append t_file.
     clear t_file.
   endloop.
*---Download data to Text file.
   perform download_data.
                   TOP-OF-PAGE                               *****
top-of-page.
   perform top_of_page.
                   S-U-B-R-O-U-T-I-N-E-S                     *****
       Form TOP_OF_PAGE
      Calling the Standard Report Header
form top_of_page.
   perform header using 'CREATE FILE FOR'
                        'VENDOR MASTER UPLOAD'
                        132.
   skip 2.
endform.                        "TOP_OF_PAGE
     Form check_file                                              **
     Checking the File entered                                    **
data: p_filename type string.
form check_file using p_filename.
*---The entered File must be Excel spreadsheet.
data: l_length type i,
        l_ext(4) type c.
l_length = strlen( p_xlfile ).
subtract 4 from l_length.
l_ext = p_xlfile+l_length(4).
translate l_ext to upper case.
if l_ext <> '.XLS'.
     message e009 with 'Only Excel spreadsheets are supported'.
endif.
*---Check if File exits and not empty.
data: l_return(10) type c.
CALL FUNCTION 'WS_QUERY'
       EXPORTING
            FILENAME             = p_filename
            QUERY                = 'FL'
       IMPORTING
            RETURN               = l_return
       EXCEPTIONS
            INV_QUERY            = 1
            NO_BATCH             = 2
            FRONTEND_ERROR       = 3
            OTHERS               = 4
IF l_return = space or l_return = '0'.
     message e530(pj) with p_filename.
ENDIF.
endform.                        "CHECK_FILE
     Form select_file                                              **
form select_file using p_filename like rlgrap-filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
       EXPORTING
          PROGRAM_NAME        = SYST-REPID
          DYNPRO_NUMBER       = SYST-DYNNR
          FIELD_NAME          = ' '
            STATIC              = 'X'
            MASK                = ',MS Excel (.xls),.xls.'
       CHANGING
            FILE_NAME           = p_filename
       EXCEPTIONS
            MASK_TOO_LONG       = 1
            OTHERS              = 2
IF SY-SUBRC <> 0.
MESSAGE e838(29) with p_filename.
ENDIF.
endform.                        "SELECT_FILE
     Form read_file                                                **
form read_file using p_filename like rlgrap-filename.
*---Display status message for User.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
       EXPORTING
            TEXT             = 'Uploading Spreadsheet'
*---Upload spreadsheet.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            FILENAME                      = p_filename
            I_BEGIN_COL                   = 1
            I_BEGIN_ROW                   = 1
            I_END_COL                     = 256
            I_END_ROW                     = 65536
       TABLES
            INTERN                        = t_filedata
       EXCEPTIONS
            INCONSISTENT_PARAMETERS       = 1
            UPLOAD_OLE                    = 2
            OTHERS                        = 3
IF t_filedata[] is initial.
message i009 with 'NO DATA FOUND IN FILE' p_filename.
stop.
ENDIF.
sort t_filedata by row col.
endform.                        "READ_FILE
     Form format_data                                              **
form format_data.
data: l_index type i.
field-symbols: <fs1>.
*---Display status message for user.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
       EXPORTING
            TEXT             = ' Processing Data...'
loop at t_filedata.
    l_index = t_filedata-col.
    assign component l_index of structure t_sheet to <fs1>.
    <fs1> = t_filedata-value.
    at end of row.
       append t_sheet.
       clear t_sheet.
    endat.
endloop.
    refresh t_filedata.
    free t_filedata.
endform.                        "FORMAT_DATA
     Form download_data.
form download_data.
OPEN DATASET p_txfile for OUTPUT.
LOOP at t_file.
     TRANSFER t_file to p_txfile.
ENDLOOP.
CLOSE DATASET p_txfile.
IF SY-SUBRC = 0.
WRITE: / 'Excel to Textfile for Vendor Master Upload: ', P_TXFILE.
ENDIF.
endform.                    "DOWNLOAD_DATA</b>

Hi!
You don't need to program the 'translation' from a file into input data for RFBIKR00 yourself. SAP has done this, so that you can do this (nearly) without programming. If you need some special conversion rules, then you can add some coding, but most is possible without.
Have a look at transaction LSMW. It's not so complicated it looks at the first time. Just look at <a href="http://help.sap.com/saphelp_erp2004/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm">help</a> for the way to use LSMW.
Regards,
Christian
P.S.: sorry for lost your efforts, but you should switch to LSMW

Error in the LSMW for vendor master using standard batch/direct input

I am facing the problem in the LSMW for the Vendor master data. The vendor is initially created for the company code 350 by using LSMW. NOw when I try to uploasd the same vendor using the same LSMW for the company code 450 then I get the error in the Bach input creation as follows:
Batch Input Interface for Vendors
FB012                    Session 1 : Special character for 'empty field' is /
FB007                    Session 1 session name VNDR_CREATE_ was opened
FB104                    Trans. 2 XK01 : Acct already exists; general area not being processed
FB125                    ... Data in table BLFA1 cannot be processed
FB016                    ... Last header record ...
FB014                    ... BLF00-STYPE 1
FB014                    ... BLF00-TCODE XK01
FB014                    ... BLF00-LIFNR 300951
FB014                    ... BLF00-BUKRS 402
FB014                    ... BLF00-EKORG /
FB014                    ... BLF00-KTOKK VEND
FB017                    ... Last data record ...
FB014                    ... BLFA1-STYPE 2
FB014                    ... BLFA1-TBNAM BLFA1
FB014                    ... BLFA1-ANRED /
FB014                    ... BLFA1-NAME1 SAVOIE AUTOMATISME DEXIS
This is because when we use XK01 to create the vendor by using the

Please check this answered link:
Re: LSMW for Vendor Master
LSMW Upload vendor master data
Edited by: Afshad Irani on May 5, 2010 12:42 PM

Which table of field "EXTENSION1" of vendor master data

Hi Experts,
I key in data in filed "EXTENSION1" (data line) for vendor master data, which table I can get this field?
Thanks.

Use this trick I learned from an ABAP friend of mine. Has a little of trial and error in it but its really good.
1. Open 2 SAP windows
2. In window 1, Go to ST05
3. Activate Trace
4. Go to window 2, access the field which you need to learn what table it is in. Ex. Go to XK02 to view the field. enter data in it.
5. Go to window 1, Deactivate Trace
6. In window 1, display trace
7. Check each table written there in SE11 and see if your field is in that table.

Match code for Vendor Master Data on PAN

Hi
Vendor match code will work only if the name are identical. But for the same vendor, user create multiple vendors.
For Ex: If the vendor name is ABC Private Limited, User puts different names like ABC Pvt Ltd, ABC P Ltd, etc.
Hence the match code check is over ridden.
For that reason, i want check on the basis of PAN number.
There is no field for PAN number in match codes field.
Please suggest how it can be maintained

Hi ,
Use the exit SAPMF02K , which is specially ment for vendor master data .
Cheers ,
Dewang

Field Status for Vendor Line item or Customer line item

Hi
Can i need to check the Field status for Vendor or Customer Line item when i use the transaction codes F-43 or F-22. This is very urgent.
Regards

Hi Vinay,
You cannot check the Field Status directly when posting a document. The Field Status is controlled by the Field Status group. This is controlled at 3 levels, the company code level, G/L Master level and at the Posting key level. Field status at the posting key level overwrites other groups. It is basically to control which fiedls need to be supressed, which are required and which are optional.
In FS00 under the create/bank/interest tab you will find the field group. Check the Recon account assigned to your vendor/customer master and check the field status in FS00.
Regards
Sridhar

Can validation check can be set for vendor master record .

Hi Experts ,
User wants to remove two existing payment methods,instead of removing i think to set validation for the vendor master record .
can validation can be set for vendor master record ?
PLease suggest me with advice.
Thanks
Pardha

Hi,
To my knowledge, validation can be set up for accounting document.
Though a work around, create a validation such that
Make the user enter the Payment method to be mandatorily entered by the user.
Also, restrict the unwanted payments as well in the same validation.
In case of APP also, the payment method in the document will take precedence.
Regards,
Sridevi

I am facing problem while working for userexit for vendor master and Editor

Hi,
I am working one userexit for vendor master. My objective is after MK01 transaction, I want to attach MM01 transaction using userexit SAPMF02K on IDES version.
1) Function module is EXIT_SAPMF02K_001 and Include is ZXF05U01.
while duble click on Include is ZXF05U01, I am getting below error.
(Program names ZX...are reserved for includes of exit function groups).
2) Second userexit is Menu exit.
    I want to create a sub menu in ABAP Editor under Utilities->Customer Exit.
   If double click on Customer exit then MM01 should be called.
   So I got one userexit SEU00001 and Function module under that EXIT_SAPLEDITOR_001 and incluse is ZXSEUU21
   If I double click on ZXSEUU21 then same error getting displayed
   (Program names ZX...are reserved for includes of exit function groups).
Can any one help me to resolve this.
Waiting for quick response.
Best Regards,
BDP

Hi Bansidhar.,
If you have created the include with same name and implemented youe logic , then it should stop in your include when you have put breakpointin it.
Please try to find the case in which you user exit is called .
It is not necessary that you include will be executed in all cases , please try to use data which is suitable for your case.

Make IBAN field necessary for vendor master

Similar Messages

Maybe you are looking for