Make list of names in local variable list appear in alphabetical order?

When you select a variable name from the drop down list of a local variable the list appears to be in chronological order. Is there any to make this list appear in alphabetical order?
George

Hi George:
You said that local variables list appears in chronological order, but you wanted to appear in alphabetic order.
You just need to set apropiate names and then use SetTabbingOrder
You can use SetTabbingOrder to order all controls and indicators of your front panel, treating every control you see in the block diagram as one
(A cluster is one of the controls you can order, but the elements inside the cluster must be ordered with ReorderControlsInCluster right-clicking the cluster)
Returning. To SetTabbingOrder you have to click on VI's EDIT menu and select Set Tabbing Order.
The front panel will turn it's color to somethin darker, and every control will be shown with a number.
That number is it's tabbing index.
At the beginning you see a 0 in the top, that means that if you click in a control, that control will become number 0, and then the number it the top will pass to be 1, so you can select the next control in order.
If your first 23 elements are ordered, you don't need to click all 23, you can just set the top number to 23 and continue ordering.
When you reorder an element, all elements before that remain the same, and the rest are added by one.
When you are don, click on OK, or discard changes with x
This SetTabbingOrder you can do with elements in your front panel, can be done with elements into a cluster and elements into a Tab Control. Only change de name (in clusters is "Reorder controls in cluster" and in Tabs is "Reorder controls in page"), but they work the same
You might be interested in reordering in groups than reordering alphabetically?
Hope it helps,
Aitortxo.

Similar Messages

  • Can you sort the "local variable" pick list?

    My program has a lot of local variables. If I right click on a variable and click on "select item", a loooong list of all my local variables appears. They appear to be in the order in which they were created in my program.
    Is there any way to modify the display to where the local variables appear in alphabetical order?
    Amateur programmer for over 10 years!

    The best solution is to not use a lot of local variables . Here is a neat trick to use local variables without having to use local variables . If you are using a state machine (case structure inside a while loop), create a cluster constant on the block diagram inside a state or case called "Local Defs". Inside the cluster, put constants for every local variable you will use. Label the constants like you would a local variable. Put a shift register on the loop border. Wire the cluster to the shift register on the right side. Do not initialize the shift register on the left side. In any case frame, you can wire from the left shift register into an unbundle or bundle to read or write to the Local. You never have to call the Local Defs state, the cluster will be defined because of the wiring. If using controls at many places, make a local constant for each control and have a state where the control is written to the local. Then you can read the local to use the value at any time. See attached vi for an example.
    - tbob
    Inventor of the WORM Global
    Attachments:
    StateMachineWithLocals.vi ‏45 KB

  • How to change value of instance variable and local variable at run time?

    As we can change value at run time using debug mode of Eclipse. I want to do this by using a standalone prgram from where I can change the value of a variable at runtime.
    Suppose I have a class, say employee like -
    class employee {
    public String name;
    employee(String name){
    this.name = name;
    public int showSalary(){
    int salary = 10000;
    return salary;
    public String showName()
    return name;
    i want to change the value of instance variable "name" and local variable "salary" from a stand alone program?
    My standalone program will not use employee class; i mean not creating any instance or extending it. This is being used by any other calss in project.
    Can someone tell me how to change these value?
    Please help
    Regards,
    Sujeet Sharma

    This is the tutorial You should interest in. According to 'name' field of the class, it's value can be change with reflection. I'm not sure if local variable ('salary') can be changed - rather not.

  • Arranging names in team calender in Alphabetical order

    Dear All,
    Please guide me through this if this is possible -
    Can we arrange/sort the names in the ESS team Calendar in Alphabetical order?
    Please guide.
    Regards,
    Poornima

    Hi Siddharth,
    Can you plase explain...
    My requirement is to have the ESS team calender in Alphabatical order..which is not as of now.
    Regards,
    Poornima

  • I want to print my iTunes library of songs in name of song alphabetical order I tried hitting on name but it printed in artist alphabetical order?

    I Want to PRINT my iTunes library of songs in Alphbetical Name of song order, I have tried hitting on name but it prints out in artist alphabetical order???  Please adivise me on this issue

    - Try looking at the previous discussions on the right side of this page under the heading "More Like This".
    - Also try posting in the iTunes forum.

  • Difficulty in using a variable to pass a list of names between 2 tables

    Hi All,
    I am trying to pass a list of names from one table as a variable to another table and trying to find the Highest level they exist at in the hierarchy. I am having some troubles with the variable and need some guidence and also if this should be a procedure or not.
    this is what i have now :
    Variable man_name Varchar;
    exec :man_name = (Select full_name from direct_manager_report)
    UPDATE direct_manager_report
    Set Manager_level_number =
    (Select 'Manager_Level_0' from manager_hierarchy where level_0_manager_name = man_name
    UNION
    Select 'Manager_Level_1' from manager_hierarchy where level_0_manager_name < > man_name AND level_1_manager_name = man_name
    UNION
    Select 'Manager_Level_2' from manager_hierarchy where level_1_manager_name < > man_name AND level_2_manager_name = man_name
    UNION
    Select 'Manager_Level_3' from manager_hierarchy where level_2_manager_name < > man_name AND level_3_manager_name = man_name
    Where full_name = man_name;
    Let me know what modifications have to be done for this the variable to get the name from table 1 and find the manager level from table 2 and populate it back in table 1.
    Any help is appreciated.
    Thanks

    Frank Kulash wrote:
    Hi,Thanks for your reply. I am sorry for not providing enough information.
    What's wrong with what you have now? I want to pass the manager name (about 2000) from direct_manager_report to the variable which i pass to manager_hierarchy table to find the highest level for each manager
    If it doesn't give the right results, then how is anyone except you to know what the right results are?
    Variable man_name Varchar;
    exec :man_name = (Select full_name from direct_manager_report)Does that really work for you?No thats why i said this is what i have and i am trying to see the best to past the list of manager names to get the level number.
    UPDATE direct_manager_report
    Set Manager_level_number =
    (Select 'Manager_Level_0' from manager_hierarchy where level_0_manager_name = man_name
    UNION
    Select 'Manager_Level_1' from manager_hierarchy where level_0_manager_name < > man_name AND level_1_manager_name = man_nameIt looks like something is missing on the line above. Did you mean "level_0_manager_name != man_name"?
    This site doesn't like to display the &lt;&gt; inequality operator. Always use the other (equivalent) inequality operator, !-, when posting here.
    UNION
    Select 'Manager_Level_2' from manager_hierarchy where level_1_manager_name < > man_name AND level_2_manager_name = man_name
    UNION
    Select 'Manager_Level_3' from manager_hierarchy where level_2_manager_name < > man_name AND level_3_manager_name = man_name
    Where full_name = man_name;Are you sure the UNION will never return more than 1 row?
    Let me know what modifications have to be done for this the variable to get the name from table 1 and find the manager level from table 2 and populate it back in table 1.Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data (in this case, the contents of table1 after everything is finished).
    See the forum FAQ {message:id=9360002}Sorry did not realize the missing !. Yes the union will always return one record for each manager name passed. I have tested the select part which hard coding the manager name and it does update the level number correctly. but i am struggling with passing a large list of values as a variable.
    This is the output i am looking for in the direct manager report table is :
    Manager Name | Manager Level Number
    ABC Manager Level 0
    XYZ Manager Level 1
    This is the structure of the manager hierarchy:
    Manager Level 0 Manager Level 1 Manager Level 2...Manager Level 14
    ABC ABC ABC ABC
    ABC XYZ XYZ XYZ
    Let me try the below but hopefully i am more clear on the requirement now.
    >
    You may want something like this
    MERGE INTO  direct_manager_report     dst
    USING   (
             SELECT    dmr.full_name
             ,           'Manager_Level_'
                    || MIN ( CASE  dmr.full_name
                                 WHEN  level_0_manager_name  THEN '0'
                                 WHEN  level_1_manager_name  THEN '1'
                                 WHEN  level_2_manager_name  THEN '2'
                                 WHEN  level_3_manager_name  THEN '3'
                               END
                     ) AS manager_level_number
             FROM      manager_hierarchy  dmr
             JOIN      manager_hierarchy      mh   ON   dmr.full_name IN ( level_0_manager_name
                                                                   , level_1_manager_name
                                                , level_2_manager_name
                                                , level_3_manager_name
             GROUP BY  dmr.full_name
         )                    src
    ON     ( dst.full_name  = src.full_name )
    WHEN MATCHED THEN UPDATE
    SET     dst.manager_level_number = src.manager_level_number
    Edited by: user599926 on Jun 4, 2013 9:41 PM

  • When debugging package, local variables always listed as 'null'

    When I'm debugging a package procedure, if I try to inspect any local variables by hovering the mouse cursor over them, the floating text that appears always says they're set to null - even though I know (because the procedure works as expected) that there must be a value there. Also, local variables don't appear in the 'Data' debug tab; and if I drag the local variables into the 'Watch' tab, their value is listed as null.
    Using v1.1.2.25 against a 9.2.0.6 db - anyone have any ideas..?
    Cheers,
    James

    Local variables should be used whenever you need a value only in a single method and don't need to remember it's value between two invocations of that method.
    A perfect example would be the counter in a for-loop.

  • How can I make a random list from list of names?

    I have a list of names and i need to place them randomly in a new list. How I make this in the Numbers?
    Tk's
    Rafael

    Here's one way:
    There are two formulas in the Sorter table.
    B2 (and filled down):   =RAND()
    A2 (and filled down):   =OFFSET(Data :: $A$1,RANK(B2,B,),0)
    The first generates a set of random values between 0 and 1 in column B.
    The second calculates the rank within the list of the column B value in its row, and uses that rank to determine how many rows below row 1 to look for the value to place in its cell.
    The checkbox cell in Go! offers a simple way to change a value, which triggers a recalculation of the Sorter table.
    Regards,
    Barry

  • How Do I Make Data Backups That List Artist Name and Album?

    I'm backing up all my iTunes music onto blank CDs, but after I made my first backup, the files on the disk do not list the artist or album name like they do in iTunes...it just lists the song title. I'm trying to back up all my songs onto disks in alphabetical order by artist name so I know which artits & albums are on which CDs, but when I put the disc in the drive all I see are a bunch of song titles. Is there a way to backup these files using iTunes and have them list the artist name, or have each different artist and album appear in its own folder on the disk (the way it does in the iTunes folder on my hard drive)?

    I am trying to burn a backup cd of my purchased songs & evry time my computer locks up. I have clicked the "burn CD" icon & have dropped down from the 'File' window.
    Any suggestions

  • Deleting all unwanted local variables at once (same name)

    Hi Everyone,
    Is it possible to delete all local variables (same name) at once instead of deleting one by one?  In other words, select all local variables with the same name and delete them at once or quickly.  I am using LV 8.5.
    Thanks,
    Frank

    If you right click on the control or indicator on the front panel, or the terminal, or a copy of the local variable on the block diagram, you can select find local variables.  It will pop up with a list of all of them.  But you will have to cycle through them one by one with Ctrl-G and delete them one by one.

  • Get Shared Variable List function

    I have created a Project; when I use "Get Shared Variable List" function, I'm enountering this error: "Error 1055 occurred at Property Node in Mechanical Room1.lvlib:MechRoom5.vi; Object reference is invalid". I've just connected the name of the process the shared variable is belong to. The vi is also in this Project library. I appreciate any help.

    Hi,
    I've created an example vi which should help out. It gets a list of all processes deployed, and then returns a list of variables for each of those processes.
    This should help to make sure that you are specifying a valid process name to the function, as this could be the cause of the error.
    Try running this and see if you get the same error. If you do then can you post your project files, or a smaller project that still shows the problem, and I'll take a further look at this for you.
    Regards
    Hannah
    NIUK & Ireland
    Attachments:
    get variables.vi ‏15 KB

  • Rest Api Time (Time return by _api/web/lists/byname("name")/items(id=1)

    HI All,
    I have a query regarding Rest API.
    I am getting time of item created and modified using _api/web/lists/byname("name")/items(id=1).
    It is returning always UTC time zone.
    Is there any relavent article saying that this is default for all sharepoint (Because I have observed the same in all of my virtual meachines sharepoint servers).
    Is there any java script to convert to Site regional settings(In day light savings also).
    Mainly I need any article related to waht API return time will be ?
    Thanks
    Koti

    Hi Koti,
    SharePoint stores all date field in UTC. That is, if you are saving a date time field in a list, SharePoint actually converts the time that you selected into UTC, and converts it back to whatever time zone the person is in when retrieving.
    When using any API SharePoint will always return the UTC time and leave it up to you to make the conversion in your interface or application.
    You could read the time from database and convert the time to your local time.
    You could refer to the JavaScript code example below to convert the time zone.
    self.toUtc = function (inputDate) {      
      var localTime = inputDate.getTime();       
     var localOffset=inputDate.getTimezoneOffset() * 60000;       
     var utc = localTime + localOffset;      
      var retval = new Date(utc);       
     debugger;       
     return retval;
    The article below is about time zone Issues when working with dates in SharePoint’s REST services.
    https://yetanothersharepointblog.wordpress.com/2013/07/14/timezone-issues-when-working-with-dates-in-sharepoints-rest-services/
    The article is about SharePoint Time Zone confusion in SharePoint 2010, it also can work in SharePoint 2013.
    http://www.techgrowingpains.com/2012/05/sharepoint-time-zone-confusion-2/
    The article below is about JavaScript Date Reference.
    http://www.w3schools.com/jsref/jsref_obj_date.asp
    Best regards,
    Sara Fan
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • The name cannot be matched to a name in the Address List

    Hi,
    I checked several posts but no luck.
    Problem: We currently have Exchange 2010 and 2003 co-existence, busy migrating to 2010. We have several domains as well. A problem came up in one of our remote access domain where we have Citrix running. After the user has been moved to the new 2010 server
    and you re-create their mail profile in Outlook 2010 then it will give the following error:
    The name cannot be resolved. The name cannot be matched to a name in the address list.
    A popup box appears with the server name exch2010cas.domain.local and the mailbox field =SMTP:[email protected] When you click on Check Name the error keeps popping up. When I change the server to exch2003.domain.local though and click Check Name the
    mailbox gets underlined and the servername changes back to exch2010cas.domain.local in the exchange server textbox.
    I'm pretty sure it must be an AD or DNS problem somewhere but I'm not sure where? I did add some domain suffixes to the new Exchange server so it can resolve hostnames in the local and remote domain. I also looked at the GAL and the entries for the user
    is in there. I'm not sure if it might have something to do with LegacyExchangeDN value either?
    I appreciate any help, thanks.

    Hi,
    I recommend the following troubleshooting:
    1.Verify that the Active Directory account that you use either to create the client profile or to log on to the mailbox has been mailbox-enabled.
    2.Verify that the user can use the Active Directory account to view sibling objects in the Users container (or in the Active Directory organizational unit that contains the user account).
    3.Verify that the user account has been stamped by the Recipient Update Service after you mailbox-enable the user account.
    4.Verify that the user can see both the Global Address List objects that are listed in the
    showInAddressBook attribute and the members of the Global Address List using Ldp.exe
    5.Log on as an administrator, and then verify that there are no duplicates in the
    addressBookRoots attribute of the Microsoft Exchange object under <var>Domain</var>,cn=Configuration,cn=Services
    For more detail steps, you can refer to the following article:
    http://support.microsoft.com/kb/297801/en-us
    Thanks,
    Angela Shi
    TechNet Community Support

  • In Settings Contacts My Info - I tapped on a name in the contact list in error. I wanted to undo that action to have no name there, but all I am able to do is change the contact name. How do I delete the name and return

    In Settings>Mail, Contacts, Calendars>Contacts - I tapped on My Info and mistakenly tapped on a name in my contacts list. I did not wish to make any changes, but cannot undo this action. All I can do, apparently, is change to a different name. How do I undo this action? Thanks.

    In Settings>Mail, Contacts, Calendars>Contacts - I tapped on My Info and mistakenly tapped on a name in my contacts list. I did not wish to make any changes, but cannot undo this action. All I can do, apparently, is change to a different name. How do I undo this action? Thanks.

  • User to call the name on a linked list from the console

    Hello,
    My program has 9 linked lists and I need to manipulate them depending on which one the user wants to add or remove from. The problem is it's different every time. I need a way to allow the user to input the name of one of the linked lists, and then from there I can manipulate that list. My general idea is as follows though the syntax is wrong.
    inputFrom = in.nextLine();
    inputFrom = inputFrom.toUpperCase();
    if (inputFrom.peek() != null){
    System.out.println("This list has data);
    {code}
    My problem is that in that if statement I can not simply place the variable in front of the action I wish to perform and expext the variable to substitute for the actual list's name. How can I work around this? Thank you in advance.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Create a Map<String, List>, where String is the name of the list. Then you can do map.get("listName");

Maybe you are looking for