Make payment terms in sales order editable after billing

Hi,
i checked orders in two different systems. In one system payment term is editable even after completely billing the sales order. In other system the payment term field in sales order is grayed out after complete billing and it is not editable.
Not sure what is the standard way. Is there any configuration / develpement throgh which we can control this?
I want to make payment terms editable in SO even after completely billing the order.
Any suggesion friends?
Thanks,
Tushar

Hello Tushar,
The fields:
   VBKD-INCO1 (Incoterm 1)
   VBKD-INCO2 (Incoterm 2)
   VBKD-ZTERM (Payment terms)
remain open at header level even after the order has been billed.
At the item level these fields are greyed out but at header level
they remain open in the event that a user may want to add more items
to the sales document.
The possibilities where the payment term disabled for edit at header
level could be done by modification/userexits, or screen definition.
Could you please check if you are using exits in MV45AFZZ particularly USEREXIT_FIELD_MODIFICATION or screen variant ?
Regards,
Raghavendra YN

Similar Messages

  • How to prevent change payment term in sales order?

    Hi,
    My client not allow sales admin. to change payment term in sales order. How to do this? (by standard SAP functions or authorization)
    Thanks & Regards,
    Jr.SD

    Either you can run T.Code shd0 or apply User exits in the program MV45AFZZ - USEREXIT_MOVE_FIELD_TO_VBAP to achieve this.
    thanks
    G. Lakshmipathi

  • Down Payment processing for Sales orders using Milestone Billing Plan

    Hi,
    The business scenario is as follows.
    The delivery for the sales orders are to be created only after the pre payment( a percentage of the total sales order value) is made by the customer.
    Hence the sales orders while creation are blocked for delivery creation using credit block by means of a userexit.
    The credit manager checks the blocked sales orders using VKM1 transaction and verify if there are any payments made by the customer to cover this pre payment to be made.
    If it is enough to cover then he releases the sales order manually for delivery creation.This is a complex process since there are too many sales orders and the payments made by the customer may not match the amount to be paid(it can be greater or lesser).The customer just pays a huge amount which is to be distributed among the sales orders for pre payments.
    Later, when the invoice is created, the customer account is cleared manually using F-32 transaction for the oldest open invoices.
    Here again there is a huge manual effort involved since he need to distribute the amount against the invoices using oldest open item principle.
    As a solution we are planning to implement "Down Payment processing for Sales orders using Milestone Billing Plan".
    Is this the right solution?
    Can you please give the steps in detail to implement this functionality for above scenario?
    We are using SAP 4.7 version without Project Systems.
    Thanks in advance.
    Regards,
    Ragesh

    Hi Ragesh
    Check the links where you will get the entire down-payment configuration
    [https://forums.sdn.sap.com/post!replydownpayments ]
    Regards
    Srinath

  • Payment terms in Sales order by default

    Hi,
    I have configured in payment terms in customer master as AB11 for description blank . but when i took printout for sale order its showing by default "Paybale immediatly by deduction" so please guide me this is Abap issue or any other config i miised.
    Thanks
    Shital D

    Hi,
    It's all depend on how your program assigned to the output type (In tx: NACE) works.
    Please ask your ABAP person to debug the print program when you generate the printout. Check whether system is picking "AB11" as it's payment term at that point.
    If it picks, then he should be able to find where the description is picking as well.
    From functional side, there is nothing you can do as payment term AB11 is picking correctly in the sales order, and it is having the correct description in the configuration.
    Issue is with the program. You HAVE TO get a help from a ABAP person.
    Best regards,
    Anupa

  • Payment Terms in sales order - urgent

    Hi all,
    while creating a sales order, payment term 'z204' is not appearing in payment terms drop down but this payment term has been defined in SPRO . Also finance ppl has created FD document in vx11n with this payment term.
    Kindly tell me that why this payment term is not appearing in sales order.
    Regards,
    Aisha Ishrat
    ICI Pakistan Ltd.

    Hi,
    please check wether you maintained the payment terms in cust master company code and sales area data sections, if you maintain there properly system copies it into the sales order.
    please reward the points if its helped you
    Ganesh

  • Payment terms in sales order

    Hello Guru
    I have received an issue saying that in the sales order the payment terms are different at the header and item data.
    I like to know under what circumstances payment terms are different at header data and item data.
    Pls provide your inputs along with tcodes and tables to see these payment terms

    Hi
    Below are the places where payment terms are maintained
    Customer Master Records ->Company Code Data->Payment Transaction.
    Customer Master Records ->Sales Area Data->Billing Tab
    Also can be maintained for materials at Conditon Records (VK11) level.
    Ramesh

  • Make payment before issue sales order

    Dear all,
    Here is my problem. After customer agreed on the sales quotation, I had to collect payment from customer before issuing a sales order. How can it be done in SBO? i tried AR reserved invoice but sales order had closed after adding AR reserved invoice. Any ideas?
    Thanks & Regards,
    Raymond Ong

    Hi Raymond,
    You can print the sales order and issue it. Did you create a incoming payment on account. ys th estandard functionality the AR resever will close the SO and you can still do a delivery on the AR reserve invoice
    Any correction to the AR - Reserve Invoice
    Regards,
    Rakeh N

  • Change Sales order Quantity after Billing

    Hi experts
    I m having the doubt in the follw'g scenario :
    Like I have created sales order>Delivery>Billing and Excise invoice. Now after this sales process completion
    i can able to change the Qty in sales order after Billing . I want to know how to control this with Functional or tech
    or with basis people?
    I want ur valuable reply that would solve my problem.
    Regs.
    SR

    Hi
    SO qty field in CHANGE MODE. I want to display the same into
    ONLY DISPLAY MODE.
    This is not possible by standard configuration
    Check with your ABAPer for any userexit or enhancement
    After billing is over if the user adds another line item in the sales order in VA02 mode that too has to be controlled by user exit
    Regards
    Raja

  • How to make payment terms as disable in sales order and quotation

    My requirement is to make payment terms(vbkd-zterm)  as display in sales order and quotation at overview ,header data and item data.
    Regards
    Edited by: vijay vijay on Jun 29, 2010 7:43 AM

    Using user exit USEREXIT_FIELD_MODIFICATION in MV45AFZZ, use it when you are going for particular case.
    Or you can go for or screen variant, use it when you are going for all cases
    Hope this can assist you.
    Thanks & Regards
    JP

  • How to make "payment terms" not modifiable in sales order

    Hello every 1,
    please help, i want to know:
    how to make "payment terms" not modifiable in a sales order , as we know it comes directly from CMR and client wants "PAYMENT TERMS" to be not modifiable.
    Look forward for your response.
    Thanks in Advance,
    Deepak

    You need to use SHD0 or userexit chnages, like always determine from customer master, if user changes, give message like not modifiable  or ask abaper to make non modifable field

  • User Exit to make Payment Term field non editable in item level .

    Hi all,
    User wants to make the Payment Term field in sales order as non editable and  Payment terms is copied from Customer Master to Sales order.
    I use user exit MV45AFZZ (USEREXIT_FIELD_MODIFICATION) to make Payment Term field non editable in header level.
    I am not able to do it in item level. Pl help to to make Payment Term field non editable in item level.
    Thanks,
    sunil

    Hi,
    You can try implicit enhancement in the include MV45AF0T_TCTRL_U_ERF_AUFTRAG_I
    use below code.
    DATA: WA_COLS LIKE LINE OF TCTRL_U_ERF_AUFTRAG-COLS.
       LOOP AT   TCTRL_U_ERF_AUFTRAG-COLS INTO WA_COLS.
       IF WA_COLS-SCREEN-NAME = 'VBAP-ZTERM'. " Check the field name
       WA_COLS-SCREEN-INPUT = 0.
       WA_COLS-SCREEN-OUTPUT = 1.
      MODIFY TCTRL_U_ERF_AUFTRAG-COLS FROM WA_COLS.
       ENDIF.
    ENDLOOP.
    It better to control it via a custom authorization object.
    put a authorization create a custom authorization object so that you can restrict it for a certain users.
    AUTHORITY-CHECK OBJECT 'ZTERM'
             ID 'ACTVT' FIELD '02'.
    IF SY-SUBRC NE 0.
       LOOP AT   TCTRL_U_ERF_AUFTRAG-COLS INTO WA_COLS.
    ENDLOOP.
    ENDIF.
    Regards
    Aromal

  • How to change Payment Terms in multiple orders at same time?

    How to change Payment Terms in multiple orders at same time?
    I have got 10,000 Order, I need to change the payment terms for all these Orders.
    Can I Know the way out for this.
    Regards,
    Dantham Conpolwedson
    Edited by: Dantham Conpolwedson on Mar 25, 2009 11:18 AM

    Hi
    There are as many options for that
    You can go for
    1)MASS t code
    2) LSMW  (by recording)
    3)BDC (by recording)
    and the most easiest way is by doing the MASS tcode
    goto MASS and enter the object type as BUS2032
    execute now select the sales order haeader data and execute and now enter the sales doc from and to range and execute now all the sales dox will be displayed
    and from the menu click on select fields  and select the terms of payment
    now select the terms of payment row and enter the new values  and click on carry out new changes
    regards

  • Payment terms in purchase Order

    Hi,
    When I have created purchase order manually, payment terms has been picked up from vendor master. Then i changed the payment terms in Vendor Master.
    After that the Purchase Order has been created automatically from KANBAN, but that purchase order picked up the old payments which was there in vendor master.
    Any reason why the old payment term is picking?

    There was no purchase requisition created for that. It could be picking up from some where else, but not sure from where this payment term is picking up

  • Rights to change Payment Terms on Purchase Order

    Hi,
    How can we assign rights to a user who is allowed to change the Payment terms for Purchase orders entered.
    Currently , the moment a PO is entered and the payment terms is changed it prompts a message saying that you are not authorized to change the payment terms.
    Where under Authorizations can i go and change this?
    Can anybody suggest a solution?
    Jyoti

    jyoti,
    Go to
    Administration>System Intialization>Authorization-->
    Genreral Authorization>Select user left side>
    Select Drill Down Administration>Drill down Setup>
    Drill Down Business partner>Drill Down Payment terms>
    Give Full Authorisation
    Jeyakanthan

  • Payment terms of Purchase Order and F-47

    Dear All,
    How can we link Payment terms of Purchase Order and Advance Payment made thru F-47.
    i.e if we have given payment terms in Purchase ORder as 50% advance then by advance payment (F-47) we shall allow to pay only 50% of Purchase Order value as advance.
    How / where can we define this type of setup.
    Regards
    Swati

    hi,
    There is no  way in the system to restrict the payment amount to 50%once, it is mentioned in the payment terms as 50% advance. System does not have control tocheck and avoid the full payment
    Rgards
    Uma

Maybe you are looking for