Make the Storage Location field in Grey mode in Delivery (picking Tab)

Hi Experts,
Pls suggest me to how  make the storage location in Picking Tab of  Delivery to Grey mode .
Regds
Rajiv

In tcode U have to enter Transaction code  VL01N
                                    Transaction variants field just Press F4 to get already buid transaction variant else u have to create the ur screen variant by clicking the button named Create in Below menu option .
If the variant already exist -> enter
u will get the data in the lower half of the screen , select the transaction Variant with field for storage location , generally datais distributed in delivry doc at header and item level so for storage location u have to take the one with item level data .
There u will find the all the fields which are there in Delivery doc at item level with check boxes in front of them please goto storage location field and check the check box saying output field ( This means this field will be display only) Save and try and create the delivery again.
This will be display only in VL01N

Similar Messages

  • Filling the storage location field

    Hi
    can any one tell me the use ogf this exit MBCF0009
    and how to use this one

    This is what the Documentation for the Function module in this exit says:
    'Short Text                                                                               
    Customer Function Call: Set Storage Location                                                                               
    The enhancement MBCF0009 enables you to set a storage location. It is   
        called up when a goods movement requires a storage location or the goods
        movement is entered online with inventory management transactions (that 
        is, the user exit is not processed from the function module             
        MB_CREATE_GOODS_MOVEMENT).                                                                               
    All the data available is transferred (item data and header data). The  
        storage location determined is returned. This may be carried out by     
        setting *, for example, so that storage location determination or stock 
        determination, if this is set, is run. But you can also explicitly set a
        storage location.                                                                               
    Example 1:                                                              
        Cost center 1 withdraws stock from storage location 0001; cost center 2 
        withdraws stock from storage location 2, and so on. In the case of goods
        receipts, you can define the storage location depending on the stock    
        type.                                                                               
    Example 2:                                                              
        Unrestricted stock in storage location 0001, stock in quality inspection
        in storage location 0002.                                                                               
    For a coding example, choose Goto -> Sample code from the component     
        display.                                                                 "
    Regards,
    Ravi

  • MIGO user exit : MBCF0009 Filling the storage location field

    Hi all,
    I want to change the storage location filed after loading data (GR for PO, GI for network) before output (show in grid).
    I found the exit  MBCF0009 but it does not work. Any other way to do this ?
    Thanks.
    Wayne

    Dera Suyog,
    I try to use method line/item change, but I cannot find a solution.
    Acctually I cannot change the value of cs_goitem and to display it.
    Below is my code!
    Pls help !
    Please have a look on my code !
    method IF_EX_MB_MIGO_BADI~LINE_MODIFY.
    break skolev.
    data: p_groes type mara-groes.
    data: p_maktx type makt-maktx.
    data: p_all type goitem-maktx.
    data: p_len type p.
    select single groes into p_groes
    from mara
    where matnr = cs_goitem-matnr.
    select single maktx into p_maktx
    from makt
    where matnr = cs_goitem-matnr
    and spras = sy-langu.
    concatenate p_maktx p_groes into p_all SEPARATED BY space.
    p_len = strlen( p_all ).
    cs_goitem-maktx = p_all.
    CALL METHOD cs_GOITEM->HOLD_DATA_SAVE( ).
    break skolev.
    endmethod.

  • Storage location field missed in (migo) details data ,where tab

    Hi
    I am try ing for free goods
    I created new document type (copy from subcont document type..)
    and create new number range for this doc type and assign to this this document type and assign item category L to this new document type
    i defined account assignmet cat with invoce checkbox tick removed
    and assing this account assignment cat to item cat L..
    i have done allabove settins in spro
    now i am going to ME21N
    WHEN I am crating subcon P.O system bydefault goods free taken ..
    but  when i was doing GR (MIGO)for  this P.O  ..system does not show the storage location in where tab (migo)...but document is posted .. stock can be shown at plant level ..if i go storage location ..stock does not show
    I think u have understood what i have done..pls guide me ..where i did mistake
    regadrs
    sesidhar
    regards
    sesidhar

    Hi
    1. Create Subcon P.O for material A0001X500G qty 100 ..Vender dummy. In P.O enter the Account assignment (costumed ...) item cat L... System automatically taken FREE tick mark...And net price value zero.. ..Saved p.o
    2. Transferposting MBIB movtype 541 materials provided to subcon dummy vendor. Post the document
    3. Then GR for this .P.O...Movtype 101 for P.O material and 543 movtyp for consumed material. Here in where tab storloc not displayed ...this 101 movtype material where it goes...
    Material A0001X500G stock is increased and A00020X500G stock is decreased... And I want accounting documents for GR 101 movt material and consumption material 543 materials...
    Service charge free ...I think ur under stand my problem...this we are called PACKCONVERSION...Through Subcon P.O....Pls..Guide me...Can we follow this procedure or not...If not...Pls tell another solution for this scenario
    regards
    sesidhar

  • How to make the Business Area field from Change Mod to Display Mode in AS02

    Hi Gurus,
    I created a Customized T-code   YAS02   for making the Business Area in Display mode with the help of SHD0.
    But my client wants to do the same in standard T-code of AS02 and they don't like to use the customized T-code.
    Kindly advise to make the Business Area from Change Mode to Display Mode in AS02.
    Thanks in advance...
    regs / Devi Aparna

    Hi Devi,
    check the following customization
    asset accounting -> Integration with the General Ledger> Additional Account Assignment Objects-> Activate Account Assignment Objects---
    Regards,
    Ranjith

  • Display mode of storage location field in inspection lot stock tab in QA11

    Hi Experts,
    I want to maintain the storage location filed in display mode in Inspection lot stock tab in Transaction QA11
    So please anyone can help me to solve this.
    Regards,
    Uttam Pal

    I'm not sure I understood the question. 
    In the UD screen on the first page the storage location is shown in display mode.  To change that you can use QAC2.
    On the stock posting screen you can change the storage location the stock is being posted if desired.  Usually most places don't have a need to change this and procedurally train their users not to. 
    If you wanted the stock posting screen to be display only, you probably have to use the screen editor to modify that which I don't think you really want to do.
    You could use automatic UD's to process your ok lots and then take away the QA11/12 from most of your users.  Then have only a few people trained to do the inspection lots requiring a manual UD.  If these people change the storage location it would be a specific choice they made, not an accident.  If this becomes a problem, they either need more training, or need to be fired.
    FF

  • Storage location field missing while doing GR with PO number

    When I receive goods from a PO, the storage location field missing from MIGO with 101. Material been extended with storage location and entered in PO. But sloc field totally greying out while I receive goods with PO.
    I tried other way to receive goods , but storage location disappears when I save it.
    MMBE shows stock as on order before reciept , after  I post goods, material document created but stock disappears. Not even in the plant.
    Can anyone help , please?

    <i>The following from other message thread solved my problem....</i>
    Stephen Birchall  
    Posts: 1,095
    Questions: 1
    Registered: 3/27/07
    Forum points: 1,566 
       Re: Material Classifications and Purchasing cycle  
    Posted: Apr 23, 2007 9:26 AM    in response to: Dushyant C Koth...       Reply      E-mail this post 
    Hi,
    You create the material in MM01 and select the non-valuated stock material type.
    When you create a PO for this material the system will ask you to enter an account assignment category (such as K for cost centre etc.) Indicate the GL etc that you want the costs to be posted to (Stationery, office supploes etc.).
    When the items are received, post the GR as normal (with MIGO). At GR the total value of the items will be posted to the correct financial accounts and the stock quantities will be updated.
    Then when you have consumed anything you post a goods issue (MB1A or MIGO) and this does not post anything to the financial accounts (it was all posted at GR) but it does reduce the stock figures.
    This process is ideal for ANY low value / high volume items, because the stock is managed correctly but you do not have many hundreds of tiny financial posting as each low value item is consumed.
    Steve B

  • GR done without mention the Storage location

    PO created and released without detremine the stroge location , then the GR for this PO is posted without detremine the storage location also my question is
    1- where is the stock now it is hidden
    2- how can i return the stock to certain storage location
    regards,

    >
    wello76 wrote:
    > thank you for your quick answar
    >
    > i have one more question
    >
    > is it any way to assgin the storage location while making the GR or the only way is to mention the storage location at the PO itself before make the GR
    >
    > Regads,
    Well if the PO is account assigned then you cann't maintain any storage location (please check your PO whether it is account assigned)
    Now if it is not account assigned i.e. normal PO then if you don't fill the storage location in the PO then in MIGO at where tab the storage location field will remain blank & you have to maintain the same in MIGO...otherwise if you maintain the storage location in PO then there is no need to maintain it again in MIGO (as it will be prefilled from PO)....you can check the stock in that scenario in MB51 also
    Regards,
    Indranil

  • MBCF0009 Filling the storage location

    Hi all
    Requirement:
    1. We have a lot of raw materials by production divison Seating, Panel, Wood, Metal and each of them will be stored into the following SLOC:
    u2022     Seating Raw Material SLOC: SEAT
    u2022     Panel Raw Material SLOC: PANL
    u2022     Wood Raw Material SLOC: WOOD
    u2022     Metal Raw Material SLOC: METL
    2. And all the raw materials must be stored in SLOC: QCSL for QC checking before it is transferred posting to their respective Raw Material SLOC Divisions. As such, we have maintained QCSL in the EP SLOC for all the raw material in Material Master-> MRP View 2.
    3. During the GR, it will be defaulted received based on the SLOC of EP which is QCSL (QC SLOC). After the QC has been passed, they will need to do Transfer Posting from QCSL to their respetive Raw Material SLOC Division.
    4. About 95% of the Production SLOC (Material Master MRP View 2) will be the same value with Raw Material SLOC Division. The remaining 5% of the Production SLOC will be KPAN (Kanban SLOC), which will be different from the Raw Material SLOC Division.
    Problem:
    Store people will not know what is the destination Raw Material SLOC division to be transferred to. Can we use MIGO User Exit to auto pick up the Production SLOC (Material Master MRP View 2) into Destination SLOC when we click the CHECK button during Transfer Posting?
    Logic:
    I1. It will pick from MMR->MRP2->Production SLOC, this value will become Destination SLOC in Transfer Posting once the user has clicked CHECK button in MIGO.
    2. For those 5% of the Raw Material with Production SLOC = KPAN (Material Master MRP2), once the user clicks CHECK button in MIGO and this Transfer Posting will be blocked and store people will have to look into our customised report to find the original Raw Material SLOC assigned to the raw material. And then will enter the correct Raw Material Division into the Destination SLOC during Transfer Posting to get it posted!
    Please advise if we can do that using the User Exit "MBCF0009 Filling the storage location field" and HOW DO I use it?
    THanks
    Edited by: Daimos on Jul 16, 2009 6:02 AM
    Edited by: Daimos on Jul 20, 2009 6:42 AM

    Dear all
    I just found out that "MBCF0009" cannot be used for MIGO, it is used for MB1C and other old Tcode.
    Instead, I use BAPI Add on enhancement (Advance user exit) to do it. Thanks!

  • Storage location field in service PR

    Hi,
    I am not able to find the storage location field in service PR generated through PS. This field is available for material component but not for external activity with service.
    Actully i have a project which have multiple storage location thats why i need that field for external service PR
    Regards
    Kalpesh

    Hi,
    there is no need of storage location for external services.
    storage location:
    storage location at which the material is stored.
    an organizational unit allowing differentiation between the various stocks of a material in a plant.
    regards,
    sandeep

  • Storage Location field not appearing in Mat Doc.

    Dear All,
    While doing GR 105 for PO, the Storage Location Field is not appearing in Mat Doc. Moreover, the TO is not getting created immediately while saving the Mat Doc. I don't know why this is happening?
    The material has both Qty/Value Updation ticked and all other related configuration is perfect like Mvt. Types/Ref. Mvt. Types etc.
    Please help to resolve.
    Regards
    Samier Danish

    Dear rksap7284,
    Thanks for your inputs. As I already mentioned confirguartion is perfect yet there is no St. Loc. field being displayed while Mvt. type. 105. I'll provide more information as below:
    - PO has Acct. ***. Cat as "P" as it has WBS element.
    - Material Type is ERSA
    - GR 103 has happened.
    Awaiting your reply
    Regards
    Samier Danish

  • Mandatory the Material Quantity and Storage Location Field in Order

    Hi Expert,
    Please advise. how can i set the Maintenance order,
    If Material field is Filled
    Then Mandatory the Quantity Field and Storage Location Field.
    Thank You
    Best Regards

    Hello,
    Please Use Below User Exits to get your Functionality
    IWO10009 --->PM Order Check for 'Save' Event
    CNEX0026--->general inspection of material
    Regards,
    Rakesh

  • In va02 tocde after entering the data only storage location field is not saving.why?

    Hai
    in va02 tcode after entering the data only storage location field is not saving. why?

    Hi Purnaiah,
    Are you using any user exit for this or not?
    Check for the below exit, this may be the place where you can implement your code for saving the value.
    SAP MV45AFZZ calling the user exit with a form USEREXIT_SAVE_DOCUMENT
    Regards,
    Rafi

  • T code MB5B , the storage location will be reset

    dear All,
    I want to see stock on posting date of particular storage location with values. When i try T code MB5B and select valuated stock, (it says storage location will be reset). and i used another T code MC.9 and MC49 , but these T codes didn't meet our requirment .
    the T Code MB5B , i can see the Material number, Material Description, Opening Stock, Opening Value, total Receipt Quantity, Total Receipt Values, Total Issues QNT, total Issues Value, closing Stock QNT, closing Stock Value.
    i need these fields appears but per Storage Location.
    Thanks a lot.
    Mosab Ahmed Mostafa
    Senior Application Consultant
    Amer Group
    Egypt, Cairo

    Hi Mosab,
    The system rejects any value entered in the fields "Storage Location",
    "Movement Type" and "Batch" if you select the Valuated Stock mode for
    the execution of MB5B.
    Regarding the Storage Location, the system clears this field with the
    message "Storage location will be reset" - Message no. M7284.
    As soon as the Valuated Stock mode is selected, the system must remove
    the Storage Location. The reason for this behaviour is that there is
    not information on material's values on Storage Location level.
    - MB5B in the Valuated Stock mode reads the entries from the material
    valuation table MBEW of a material and valuation area to get the current
    valuated stock and value.
    - Then it reads the related MM and FI documents to calculate the stock
    and values on start date. A valuation area could be assigned many
    storage locations.
    The related MM documents can belong to many storage locations.
    In the case there are stock transfer postings from plant to plant
    the MM documents do not contain a storage location.
    So it makes no sense to calculate and display the valuated stocks
    and values on Valuation Area level when the number of the selected
    MM documents is incomplete. MB5B will deliver wrong results in this
    case.
    BR
    Nadia Orlandi

  • Storage location field mandatory in PR

    Hi ,
    We want to make "Storage location" field mandatory in PR for  "_Document Type and Account Assignment" Combination._
    Like we have a PR document Type ZDM for raise a PR for materials, we want to make STORAGE LOCATION field mandatory if ACCOUNT Assignment in line item is BLANK.
    In case Account assignment is K then this field should be NON-MANDATORY and preferrably should be greyed out.
    Is there is any standard SAP settings for that
    Regards
    Shrey

    Hi,
    Use the user exit -> MEREQ001
    Hope the above helps.
    Regards,
    Vivek

Maybe you are looking for

  • Snapz Pro X and Final Cut Pro

    I'm screen capturing QuickTime movies of usage of a website via a web browser to include in a video production. I'm using Ambrosia's Snapz Pro X to do the video capture. I've sized the browser to 720x480 for the capture. I'm exporting the capture usi

  • Can I embed Illustrator tools in my Scripts ?

    Hallo every one Background story My work colleges and I have gotten our hands on a ridicules amount of illustrator files. These are divided in to category's and hold more then one object/group in each file. we have managed to find/wright a script tha

  • How can i rotate a 3d chart?

    i can't seem to rotate my 3d charts. this goes for bar abd pie charts too. if i press the arrows at the 3d scene, nothing happens.

  • More XMP questions / filtering on edit settings

    alright, i've imported one or two of my old CS projects into LR1.0. now i have a couple of questions. in CS, i used sidecar XMP files, both as a way to avoid the mystery of the photoshop database, and to future proof myself for when something like LR

  • Transfer photos saved in aperture to my passport (hard drive)

    I have 6, 000 photos saved in aperture and the same photos are saved in my iphoto program. I want to move my aperture pictures to MY PASSPORT hard drive. How do i do this?