Make view transition in/out of the window

I have a UIViewController that holds three different views via a segment button at the top.
I want one of the views (first segment) to transition in and out of the window when clicking a button.
Is this possible at all?

You can either use a NavigationController to do that automatically for you.
or
Read the CoreAnimation Programming Guide and search for kCATransitionFromLeft or kCATransitionFromRight.

Similar Messages

  • Output print at out of the window

    Hi All,
    I'm facing some problem when print the output. After i run the program, the output is print at out of the window.
    Could someone advise?
    Thanks,
    Alice

    If you could see the layout correctly in the print preview but it gets truncated/ prints outside the window when you actually print it then it might be the problem with the printer settings also. The printer setting defined in transaction SPAD might be one of the reasons. Check with the BASIS team what are the margin setups relevant for the printer on which you are trying to print.
    Cross check by printing on some other printer. If the results are not good, then try and check the dimensions of window in SAPscript.
    And since it is SAPscript make sure that you do a client copy after you make the changes for dimensions, incase the developement client and testing client are different.
    Regards,
    Rinkesh Doshi

  • How to avoid that the last column in a datagrid increase the width out of the window?

    I have a datagrid with this configuraction:
    <DataGrid.Columns>
    <DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}"/>
    <DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}"/>
    <DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}"/>
    </DataGrid.Columns>
    The last column is a description, so the text can be a bit large. so I would like that the width don't be wnough greater than makes the datagrid has a width out side the window.
    For this, I have read that I can use Width="Auto" in all the columns and in the last column width="*", but in this case all the coloumns has a very low width so I can't read anything.
    The code that I have used in this case is:
    <DataGrid.Columns>
    <DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}" Width=""Auto"/>
    <DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}" Width=""Auto"/>
    <DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}" Width=""*"/>
    </DataGrid.Columns>
    I am using visual studio community edition and wpf 4.5.1.
    Thank so much,

    >>For this, I have read that I can use Width="Auto" in all the columns and in the last column width="*", but in this case all the coloumns has a very low width so I can't read anything.
    Can't you just set an explicit width for the first two columns then?, e.g.:
    <DataGrid.Columns>
    <DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}" Width="100"/>
    <DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}" Width="100"/>
    <DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}" Width=""*"/>
    </DataGrid.Columns>
    There is also a MinWidth property that you can use to prevent the columns from being to narrow:
    <DataGrid.Columns>
    <DataGridTextColumn Header="Column01" Binding="{Binding Property1, Mode=OneWay}" Width="Auto" MinWidth="100"/>
    <DataGridTextColumn Header="Column02" Binding="{Binding Property2, Mode=OneWay}" Width="Auto" MinWidth="100"/>
    <DataGridTextColumn Header="Column03" Binding="{Binding Property3, Mode=OneWay}" Width=""*"/>
    </DataGrid.Columns>
    Hope that helps.
    Please remember to mark helpful posts as answer to close your threads and then start a new thread if you have a new question.

  • How to make a short clip out of the original one ?

    Some days ago, I asked a question on editing a clip in this forum. The responder asked me to provide a few seconds of the clip for his examination. But I got stuck. I didn't know how to make a clip of a few seconds out of the original clip and that it had the exact same format and properties as the original clip.
    Neither Premier nor After Effect have an ouput option such as "same as original source" .
    So, my question is how to make a short clip out of the original one with everything the same properties as the original one.
    Thanks in advance.

    May be I haven't made myself clear
    Sorry, but I think that I am still not following you.
    I want to export and render the short clip to a new file which I want to have everything the same as the original clip. Just like I cut off a few seconds off it and that few seconds becomes an independent file.
    OK, you have your original source file. It is complete and is also unaltered. If you want a "Copy" of it, just use Windows Explorer, or similar to make that Copy. If you want a separate file of your edited version of that source file (as it appears in the Timeline), use the WAB (Work Area Bar) to include just that edited instance of the source footage, and Export just the WAB. This will give you a separate file with the edits in it.
    I still feel that neither is what you want. If you can step me through, maybe with screen-caps, what you have and what you wish to end up with, I can see the operation more clearly.
    Good luck,
    Hunt

  • 10.8.6 Column view. Can we set the window width to resize to it's longest file?

    I have a MacBook Pro, 10.8.6. I always have my windows open in Column view. Can we set the window width to resize to it's longest file? I'm always having to manually make the width wider and it's annoying.
    Thanks

    Hi, the latest OSX is 10.7, soon to be 10.8, there is a way in Leopard/10.5 & Snow Leopard/10.6 to make finder display that...
    http://osxdaily.com/2007/12/02/show-full-directory-path-in-finder-window-title-b ars/
    A possible workaround for Tiger/10.4 is both of these which show the full path & is Copyable...
    Find Any File...
    http://apps.tempel.org/FindAnyFile/
    EasyFind...
    EasyFindPath
    Near the bottom of the page.

  • Tried to connect my messages from my phone to my macbook, but the accounts tab under preferences won't let me type in my Apple ID and I can't save, cancel, or exit out of the window

    I just got a new MacBook Pro today. My friend explained to me how to connect my messaged from my phone to my Mac, since they weren't connected yet. I opened Messages > Preferences > Accounts. My Apple ID and account info was already there and it was enabled, but the messages still weren't syncing, so I disabled it and tried to add the account again. I went to put in my account info, but I realized there was no space to put in my Apple ID, even though it said to. I typed in my first and last name, password and country, but when I clicked "save" nothing happened. The section that asked my ID, name and password disappeared, the "save" button keeps flashing, and I can't "cancel" or exit out of the window. If I press "cancel", an alert message appears but all it says is "(null)". How can I fix this so that I can exit out of it? It won't let me shut down because of this.

    It will only sync with new messages received after Mac's Messages is configured and running.
    It will not synced old messages.

  • Please help before i throw my laptop out of the window!!!!!!!!  :-)

    OK, so I have been surfing the net for help/solutions but to no avail...
    When I try and burn a disk from itunes on to a blank disk i get the 2131 error which judging by the ammount i have seen written about it, is VERY common.
    I am about to throw my laptop out of the window as I cant fix it and am have just spend my Christmas itunes vouchers on downloads!argggggggghhhhhhhh
    My cd driver is SN-S082H ATA ???? please does anyone have any ideas what i can do??????
    Many thanks, in advance! Jen.

    Since the issue really is not related to the focus of this forum...compatibility issues between Mac OS and Windows, you should 1. Try a different brand of discs. 2. Post your question on the iTunes forums: http://discussions.apple.com/category.jspa?categoryID=150 3. Post your question on a Windows forum such as those at http://www.windowsforums.org

  • Like an idiot, i bought a game for an ipad and only have a macbook air. can i somehow get the game to play on my air? or have i just thrown $5.29 out of the window?!?

    I recently bought a game for an "ipad", (thru itunes), when I only have a MacBook Air...I had seen where you could switch apps back and forth between devices, ad I thought I could do this. Is there a way to play the game on my Air laptop? Or did I just throw $5.29 out of the window? One more thing...it involved Facebook, and I don't belong...or want to belong!?
    I want to play Jeopardy, Wheel of Fortune, etc. ON MY MACBOOK AIR!?!???

    No way to play an iOS game on a Mac presently.
    I suspect if you contacted Apple's Customer Support and explained the situation they would refund or credit your account.
    SCR

  • The webpage your are viewing is trying to close the window

    Hi. I run an HTML script which in turn runs my Web Form and quickly closes the initial IE window (for neatness). However, it the user first is prompted:
    "The webpage your are viewing is trying to close the window.
    Do you want to close this window?"
    Do you know what causes this and how I can surpress the message?
    Thanks in advance.

    See Re: HELP - CLOSE WEB BROWSER

  • Compaq Laptop make noise and can't open the windows.. Noise at HardDisk part

    Why my sister's Compaq Laptop make noise and can't open the windows.. huhuhu.. the sound come from HardDisk in that laptop.. its sound like the HDD reader scratched the Disc insde.. how can it be?? my sister scold me already couze she wanna use for her work.. 

    Hi Hawaiian_Starman,
    Thank you for the suggestion.
    I ran the first aid in the Keychain both for verification and for repair and both immediately returned with "no problems found".
    As for the certificate, according the web administrator nothing had changed for the certificates.
    even on the windows laptop I also get the certificate as being expired, but by simply accepting that I still have access.
    I had a pop up every time that alerted me to the certificate issue, but whether I "continued" or not that still did not matter.
    Yesterday, in an effort to find a solution, I went into the "details" and entered to trust this website.
    Now that certificate issue does not pop up anymore. But I do not know how to reverse that either.
    I have the feeling indeed it has something to do with a certificate, but how is the question.

  • Help before I throw this printer out of the window!!!!!!!!!!!!!!!!!

    I have just purchased a Deskjet 2540 all in one printer - I will only ever need to print boarding passes etc. -
    this looked so good on Amazon ideal for my iPad and said how easy to set up!!! In my dreams - I have now spent 10 hours
    Trying to set this up and last night was close to cracking:-
    I am setting this by wirless. I have the password and the printer showing on my iPad.
    Each time I try and load the softwear I am told an unexpected error has occurred please try again later - I
    Have tried and tried to no avail. Apple staff have said I do not need this softwear????????
    The network test results say:-
    1 check the printer network name ssid matches your wireless router network name ssid exactly!!!!!
    2 if they do not match exactly, run the wireless setup from the printer software to configure your hp printer!!!!!
    But no where can I find how to do this and sorry I really do not understand what this means.
    Reading Amazon some people have set up in 15 min!!!!
    The cost of bringing in an expert to set this up is worth more than the printer cost!!!!!!
    Thanks for reading feel better letting of steam will defiantly be a 0 from me for the feed back to Amazon

    Hello SueJon,
    Welcome to the HP Support Forums!
    I hope this reply finds you with the printer not thrown out of the Window. Regarding the Deskjet 2540 setup to work with the iPad, I would like to help.
    There are two ways that you can print from the iPad to the 2540. The first, Wireless Direct. Wireless Direct is a network that the printer broadcasts and the iPad would connect to it. This method will leave the iPad with no other network access while connected.
    Second, and more functional, is having the printer connected to the same network that the iPad is connected too.
    In order to setup this connection, follow the steps outlined below;
    Turn Wireless Direct on from the front panel button on the printer. (number 4).
    Connect the iPad to the printer network, Settings> Network> HP-Print-2540.
    Open Safari and type this I.P address into the address bar, 192.168.223.1 and hit Enter.
    Go to Network or Wireless and then Wireless Setup Wizard.
    Select your network and enter the needed information.
    Once connected, the Wireless light should be solid, connect the iPad back to your network. To print, open a document, hit the Share button (), and if an option to print is available you will be able to select the print option.
    I hope you find this information helpful.
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How to zoom out and view an entire track in the window

    There's got to be a way to zoom out so an entire track can viewed at once so that segments of the track can be shifted around. I have a track that is about 50 minutes long with several segments in it. I want to shift the segments around. Right now I can only view about a minute of the track at a time and have to click on the segment then move the cursor either left or right and wait for Garageband to scroll to the time where I want to put it. Isn't there a way to just zoom out and view the entire track and then shift segments around without all the scrolling? Does that make sense?

    Christoph Drösser wrote:
    Hm ... mine zooms out to more than an hour?
    interesting!
    I opened GB4 and it maxed out at 4 minutes. then i opened GB6 and it maxed out at 15 minutes. then i opened another project in GB 6 and it maxed out at 35 minutes.
    so there must be something else going on here, perhaps like how time sigs affected length in the older versions?

  • Would an HP saavy person respond to this issue.. or im going to toss my HP POS out of the window..

    i am trying to find HP recovery cds to BUY .. (one would think that would be easy since well its more money for HP.. )
    for my seagate 1tb barracuda HD that i just found out is a Advanced format HD.. and since my 2009 recovery cds are garbage now i need new recovery cds.. or should i just go spend 100 bucks on a win 7 copy or should i just toss my A6567c HP machine out the window and buy some other brand... im quite livid.. ive searched every spot you can look ive looked up every page one can look .. or am i just unlucky and they dont make new recovery cds for my machine and im stuck with a paper weight now ?
    any direct link by some HP admin would be appreciated.. 
    Things shouldnt be this hard to find online.. 
    starbuxx
    This question was solved.
    View Solution.

    Starbuxx
    You might try the following resource:
    Recovery Kit FL051AV For HP Model Number a6567c
    There is an 800 number you can call with any concerns or questions that you have.
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

  • Make a menu item that changes the window

    Since I am always changing the interface of Brandsonic Web, I would like to make a menu item that would allow the user to change the window to a window they like. The structure of the app is I have 3 different windows objects and I would like a way to change between them with a menu item choice. How do I go about doing this? Thanks!

    Click on the Menu bar  and go to View .  Or, hover over where the Menu bar shiuld be and click on it when it appears.  Try quitting and relaunching Finder.

  • How to make an object getting out of the screen ?

    Hello everybody !
    I am creating a game introduction with Flash pro CS6 and here's is my problem.
    I want a object in my animation to leave the screen, but I dont know how to do it.
    Is there for example, a way to delimited the working area, so that when I make an object go out of this area, it does not appear in my final animation ( no matter the format, .avi, .mov, spritesheets ... ) or can eventualy be "cut" ( if I make my object half inside the working arear and half outside ) ?
    Is there an other way to do this ?
    Thanks !

    Using a mask might be one way.

Maybe you are looking for