Making a number unavailable between 1700 and 06.00

Hi,
Does anyone knows how we can make a number unavailable between 17.00 and 06.00. I have to create a number with a permanent forward to cell phone, but the number should only be called between 06.00 and 17.00. So if you are dialing this number at 18.00 the forward will not work, neither the phone rings.
Any suggestions on this?
Best regards
Jorg

Hi,
In the translation pattern i'm now using a css which cannot reach a mobile number.
When this number is unavailable (it is between 17.00 and 06.00) the person who is dialing the number is receiving the same tone indication as the number is incorectly formed.
Is it possible to set a message on this number during the unavailable period telling it is available during daytime
Best regards
Jorg Ramakers

Similar Messages

Phone number synchronisation between 3650 and Outl...

Hi,
I'm using PC Suite for Nokia 3650 to synchronise v 1.2.0 with my MS outlook diary/contacts.
Phone numbers -
My phone numbers are stored in outlook as international ones, e.g. +44 (01902) 324000 so that outlook knows the international code, the area code and can handle dropping leading 0s for international calls, etc. When synchronised with my 3650, it passes the whole number. It's stored in the phone as +44 (01902) 324000 , but it dials +4401902324000 *with* the leading 0 which means it won't work.
Calendar synchronisation
If I've got something flagged as an all-day event, it gets passed to the 3650 as a memo with a 15 minute reminder alarm. I can't delete the alarm, and it tends to go off at 11:45pm! How can I stop it doing this?
Any ideas?
Cheers,
Kevin

You may have to look at your net design. The 2960 is generally not suitable as a switch with a lot of servers on it using etherchannels or as a network aggregation switch where you need a large amount of port channels. If you have already used port channels 1-6 on the 2960 you are out of luck, it only supports 6 on the earlier models of the 2960 .If you need another you will have to replace the switch with like a 3560 or equivalent. Not having really looked at the newer 2960's I don't know if they still have that restriction, you would have to check the spec sheets to see if they meet your requirements.

How I get random number between 1 and int number ?

how can I get random number between 1 and int number
like between 1 and 10 etc.
10x

Use the nextFloat() method of the Random class, this returns a random number between 0.0 and 1.0. To get and integer range from that multiply the return value of that method call by the integer range you need (in this case 10), and add the starting number you want returned in the range (1 in this case). The code below works for numbers 1-10.
Random r = new Random();
int x = (int)(r.nextFloat()*10) +1;

Calculate the days between today and specific day.

I'm trying to calculate the number days between Today and some specific date in the future using SharPoint Designer (XSL). This is what I'm using:
<xsl:value-of select="number(ddwrt:DateTimeTick(ddwrt:GenDisplayName(string(@Due_Date))))- number(ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($Today))))" />
e.g. 23 days >>>> 634948416000000000 ticks
This works perfectly while I'm in SPDesigner itself, but once I try to see it in the browser it shows the number of days in "Tick Numbers". Is there a way I can fix this? I've been looking all over the internet and I haven't found any really good answer.
thanks!

Thanks for the quick response Marc.
I've no experience of using momentsJs with SharePoint lists and I need to be able to get this up and running pretty quickly. I guess you need some coding experience to use it?
I'm thinking that there should be a way to do this in SPD with something similar to this from another site, but with the conditions placed on the source field (Planned end Date) instead of the current date.
not((ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($thisNode/@Plan_x0020_Ende)))
>=
(ddwrt:DateTimeTick(ddwrt:Today())-(7*24*60*60*1000*10000)))
and
(ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($thisNode/@Plan_x0020_Ende)))
<=
(ddwrt:DateTimeTick(ddwrt:Today())+(7*24*60*60*1000*10000))))
and
not((ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($thisNode/@Ist_x0020_Ende)))
>=
(ddwrt:DateTimeTick(ddwrt:Today())-(7*24*60*60*1000*10000)))
and
(ddwrt:DateTimeTick(ddwrt:GenDisplayName(string($thisNode/@Ist_x0020_Ende)))
<=
(ddwrt:DateTimeTick(ddwrt:Today())+(7*24*60*60*1000*10000))))

Am getting message from MacPro that my start up disc is full - but I can't find it and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files. help?

I am getting message from MacPro that my start up disc is full - but I can't find this "start up disc" and can't figure out what to do to help situation. I've been making a number of imovies, which generates junk files and material that I should toss in the trash, but it is not clear to me what items I can toss and which items I can't toss. Can you help? Using the imovie "help" support the system showed me under the menu item "go" where the "start up disc" should be - but that wasn't actually available on my menu! Thanks for your help!

Disk Utility
Get Info on the icon on Desktop
Try to move this to the MacBook Pro forum
Your boot drive should be 30% free to really perform properly. 10% minimum
Backup, clone, use TimeMachine, use another drive for your projects and movies, replace and upgrade the internal drive even.

Table relations between vbrk and bkpf for Accounting Document Number

hello,
i am using 4 tables to get data into my programs.
vbrk,vbrp konv and bkpf.
i want to get belnr from bkpf.i found relation between vbrk and belnr.but in vbrk table belnr's value is initial.
can anybody tell me that how should i relate vbrk and bkpf or how to get Accounting Document Number(belnr) from bkpf for Billing Document(vbeln).
regards,
soniya s.

hi,
chekc this. its working for me.
data : WA_AWKEY LIKE BKPF-AWKEY.
data : WA_BELNR LIKE BKPF-BELNR.
data : LENGTH TYPE I.
*BREAK MTABAP.
LENGTH = STRLEN( IT_VBRK-VBELN ).
if LENGTH = '10' .
MOVE it_vbrk-VBELN TO WA_AWKEY.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR.
CLEAR WA_BELNR .
CLEAR WA_AWKEY .
else.
CONCATENATE '0' it_vbrk-vbeln INTO wa_awkey.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR .
CLEAR WA_BELNR .
CLEAR WA_AWKEY.
endif.

Get number of month, week and date between 2 dates

Hi all,
Is it possible to display number of month, week and days between 2 dates? either by using only SQL query or through PL/SQL...
Input:
From date: 01-Oct-2010
To date: 19-Oct-2010
I want output as below (Assuming the week starts from Monday to Sunday in oracle).
01-Oct-2010 -- (Since this is in mid of the week)
02-Oct-2010 -- (Since this is in mid of the week)
03-Oct-2010 -- (Since this is in mid of the week)
40 -- (Oct 4 to Oct 10 falls in 40th week of the year)
41 -- (Oct 11 to Oct 17 falls in 41th week of the year)
18-Oct-2010 -- (Since this is in mid of the week)
19-Oct-2010 -- (Since this is in mid of the week)
Note: If there is one full month between the given date, then the month number should be displayed.
After the month, the remaining date comprised with one full week, then the week number of the year should
be displayed. After displaying the week, the remaining dates should be displayed as it is..
Appreciate your help..
Thanks.
Rajan.

I suppose if it's just like a calendar type information you want then something like...
SQL> break on month skip 1
SQL> set linesize 200
SQL> set pagesize 2000
SQL> column month format a20
SQL> column week format a4
SQL> with req as (select '&Required_Year_YYYY' as yr from dual)
2      ,offset as (select case when to_char(trunc(to_date(yr,'YYYY'),'YYYY'),'IW') in ('52','53') then 1 else 0 end as offset from req
3 select lpad( Month, 20-(20-length(month))/2 ) month,
4         '('||week||')' as week, "Mo", "Tu", "We", "Th", "Fr", "Sa", "Su"
5 from (
6    select to_char(dt,'fmMonth YYYY') month,
7    case when to_char(dt, 'mm') = '12' and to_char(dt,'iw') = '01' and offset = 0 then '53'
8         when to_char(dt, 'mm') = '12' and to_char(dt,'iw') = '01' and offset = 1 then '54'
9         when to_char(dt, 'mm') = '01' and to_char(dt,'iw') in ('52','53') then '1'
10         else to_char(to_number(to_char(dt,'iw'))+offset) end as week,
11    max(decode(to_char(dt,'d'),'1',lpad(to_char(dt,'fmdd'),2))) "Mo",
12    max(decode(to_char(dt,'d'),'2',lpad(to_char(dt,'fmdd'),2))) "Tu",
13    max(decode(to_char(dt,'d'),'3',lpad(to_char(dt,'fmdd'),2))) "We",
14    max(decode(to_char(dt,'d'),'4',lpad(to_char(dt,'fmdd'),2))) "Th",
15    max(decode(to_char(dt,'d'),'5',lpad(to_char(dt,'fmdd'),2))) "Fr",
16    max(decode(to_char(dt,'d'),'6',lpad(to_char(dt,'fmdd'),2))) "Sa",
17    max(decode(to_char(dt,'d'),'7',lpad(to_char(dt,'fmdd'),2))) "Su"
18    from ( select trunc(to_date(req.yr,'YYYY'),'y')-1+rownum dt
19           from all_objects, req
20           where rownum <= add_months(trunc(to_date(req.yr,'YYYY'),'y'),12) - trunc(to_date(req.yr,'YYYY'),'y') )
21        ,offset
22    group by to_char(dt,'fmMonth YYYY'),     case when to_char(dt, 'mm') = '12' and to_char(dt,'iw') = '01' and offset = 0 then '53'
23                                                  when to_char(dt, 'mm') = '12' and to_char(dt,'iw') = '01' and offset = 1 then '54'
24                                                  when to_char(dt, 'mm') = '01' and to_char(dt,'iw') in ('52','53') then '1'
25                                                  else to_char(to_number(to_char(dt,'iw'))+offset) end
26    ) x
27 order by to_date( month, 'Month YYYY' ), to_number(x.week)
28 /
Enter value for required_year_yyyy: 2010
old   1: with req as (select '&Required_Year_YYYY' as yr from dual)
new   1: with req as (select '2010' as yr from dual)
MONTH                WEEK Mo Tu We Th Fr Sa Su
    January 2010     (1)               1 2 3
                     (2)   4 5 6 7 8 9 10
                     (3) 11 12 13 14 15 16 17
                     (4) 18 19 20 21 22 23 24
                     (5) 25 26 27 28 29 30 31
   February 2010     (6)   1 2 3 4 5 6 7
                     (7)   8 9 10 11 12 13 14
                     (8) 15 16 17 18 19 20 21
                     (9) 22 23 24 25 26 27 28
     March 2010      (10) 1 2 3 4 5 6 7
                     (11) 8 9 10 11 12 13 14
                     (12) 15 16 17 18 19 20 21
                     (13) 22 23 24 25 26 27 28
                     (14) 29 30 31
     April 2010      (14)           1 2 3 4
                     (15) 5 6 7 8 9 10 11
                     (16) 12 13 14 15 16 17 18
                     (17) 19 20 21 22 23 24 25
                     (18) 26 27 28 29 30
      May 2010       (18)                 1 2
                     (19) 3 4 5 6 7 8 9
                     (20) 10 11 12 13 14 15 16
                     (21) 17 18 19 20 21 22 23
                     (22) 24 25 26 27 28 29 30
                     (23) 31
     June 2010       (23)     1 2 3 4 5 6
                     (24) 7 8 9 10 11 12 13
                     (25) 14 15 16 17 18 19 20
                     (26) 21 22 23 24 25 26 27
                     (27) 28 29 30
     July 2010       (27)           1 2 3 4
                     (28) 5 6 7 8 9 10 11
                     (29) 12 13 14 15 16 17 18
                     (30) 19 20 21 22 23 24 25
                     (31) 26 27 28 29 30 31
    August 2010      (31)                    1
                     (32) 2 3 4 5 6 7 8
                     (33) 9 10 11 12 13 14 15
                     (34) 16 17 18 19 20 21 22
                     (35) 23 24 25 26 27 28 29
                     (36) 30 31
   September 2010    (36)        1 2 3 4 5
                     (37) 6 7 8 9 10 11 12
                     (38) 13 14 15 16 17 18 19
                     (39) 20 21 22 23 24 25 26
                     (40) 27 28 29 30
    October 2010     (40)              1 2 3
                     (41) 4 5 6 7 8 9 10
                     (42) 11 12 13 14 15 16 17
                     (43) 18 19 20 21 22 23 24
                     (44) 25 26 27 28 29 30 31
   November 2010     (45) 1 2 3 4 5 6 7
                     (46) 8 9 10 11 12 13 14
                     (47) 15 16 17 18 19 20 21
                     (48) 22 23 24 25 26 27 28
                     (49) 29 30
   December 2010     (49)        1 2 3 4 5
                     (50) 6 7 8 9 10 11 12
                     (51) 13 14 15 16 17 18 19
                     (52) 20 21 22 23 24 25 26
                     (53) 27 28 29 30 31
61 rows selected.
SQL>

Incorrect doc.no.: select document number between 82139259 and 000000000

Hi Expert,
When i try to to Release to Accounting t for a Billing Document (VF02)-->Change Billing Document --> Release to Accounting, It is not creating accounting Document instead it Says the Below Error.Pls Help to resolve this.
Incorrect doc.no.: select document number between 82139259 and 00000
    Message no. F5151
Diagnosis
    The document number you specified, "&v1", is not in the ap
    number range. The number range is dependent on the documen
    The exception to this rule is formed by recurring entry do
    must use number range 'X1' and sample documents, which mus
    range 'X2'.
    Possible reasons for this error message are:
    o You have entered an incorrect document number.
    o An incorrect document number was transferred to this ap
       during an update from another application (e.g. CO).
System response
    The document cannot be processed any further.
System response
    The document cannot be processed any further.
What to do
    o Enter a document number that is within the specified number interval.
    o If this error was caused by an update from another application, check
       the type of number assignment in that application (external or
       internal?) as well as the document number transferred.
Example
    In the CO settlement profile, a document type with external number
    assignment was entered, whereas an internal document number was
    transferred.
PLs Help
Zubair
Edited by: MhdZubair on Mar 22, 2011 10:42 AM

Hi,
Please refer the link :
Incorrect doc.no.: 2. Select document number between 6300000000 and 6399999
Regards,
Pramitha.

Communicate large number of parameters and variables between Verstand and Labview Model

We have a dyno setup with a PXI-E chassis running Veristand 2014 and Inertia 2014. In order to enhance capabilities and timing of Veristand, I would like to use Labview models to perform tasks not possible by Veristand and Inertia. An example of this is to determine the maximum of a large number of thermocouples. Veristand has a compare funtion, but it compares only two values at a time. This makes for some lengthy and inflexible programming. Labview, on the other hand, has a function which aloows one to get the maximum of elements in an array in a single step. To use Labview I need to "send" the 50 or so thermocouples to the Labview model. In addition to the variables which need to be communicated between Veristand and Labview, I also need to present Labview with the threshold and confguration parameters. From the forums and user manuaIs understand that one has to use the connector pane in Labview and mapping in Veristand System Explorer to expose the inports and outports. The problem is that the Labview connector pane is limited to 27 I/O. How do I overcome that limitation?
BTW. I am fairly new to Labview and Versitand.
Thank you.
Richard
Solved!
Go to Solution.

@Jarrod:
Thank you for the help. I created a simple test model and now understand how I can use clusters for a large number of variables. Regarding the mapping process: Can one map a folder of user channels to a cluster (one-step mapping)? Alternatively, I understand one can import a mapping (text) file in System Explorer. Is this import partial or does it replace all the mapping? The reason I am asking is that, if it is partial, then I can have separate mapping files for different configurations and my final mapping can be a combination of imported mapping files.
@SteveK:
Thank you for the hint on using a Custom Device. I understand that the Custom Device will be much more powerful and can be more generic. The problem at this stage is that my limitations in programming in Labview is far gretater than Labview models' limitations in Veristand. I'll definitely consider the Custom Device route once I am more provicient with LabView. Hopefully I'll be able to re-use some of the VI's I created for the LabView models.
Thanks
Richard

Incorrect doc.no.: 24. Select document number between 0090000000 and 009999

Hi All,
I created billing doc, it save and gave the number but with error on account determination, i checked the no range corrected it and got the error: Incorrect doc.no.: 24. Select document number between 0090000000 and 0099999999.
Please Help.
Maureen.

I very much hope you've done it in a test system.
It seems that your document was given number 24, according to the number range that existed at that time. Then you went and changed the number range to 900000... and, naturally, number 24 is not within the valid range anymore. So what else did you expect?
If it was (fingers crossed) a test system, just forget about that document and create a new one. Otherwise you'll have to change the range back, then cancel the document 24 (make sure the cancellation does not post to accounting either), then change the range again.

[svn:osmf:] 13042: Fix for FM-287, reinstating the main sample ( that uses serial and parallel composition), and making another pass at getting all the changed trait methods mapped correctly back- and forth between JS and Flash .

Revision: 13042
Revision: 13042
Author:   [email protected]
Date:     2009-12-17 03:45:27 -0800 (Thu, 17 Dec 2009)
Log Message:
Fix for FM-287, reinstating the main sample (that uses serial and parallel composition), and making another pass at getting all the changed trait methods mapped correctly back- and forth between JS and Flash.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-287
Modified Paths:
    osmf/trunk/apps/samples/framework/HTMLGatewaySample/HTMLGatewaySample.as
    osmf/trunk/apps/samples/framework/HTMLGatewaySample/html-template/index.template.html
    osmf/trunk/framework/MediaFramework/org/osmf/external/HTMLElement.as
    osmf/trunk/framework/MediaFramework/org/osmf/gateways/HTMLGateway.as

Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
Look at save_absolute_paths_in_playlists in your mpd.conf.

How generate a random number that is between 0 and 15! (0-15)

how generate a random number that is between 0 and 15 ??? (0-15)
pls tell me, thx!!!!!!!!!!!!!!!!!

import java.util.Random;
Random r = new Random();
int mynumber = r.nextInt()%16;
For (2^1)-1 number use:
-> int mynumber = r.nextInt()&15; // speedup

Diff between Integer and Number in Oracle

Hi,
What's the differet between integer and number in Oracle?

u can say integer is a subset of number.
integer provided by oracle for compatability with ANSI/ISO
u can use number with scale=0 to represent integer values.

Random Number between 10 and 30

I'm just curious how to generate a random number between 10 and 30. I know I use the Math.Random function, but I'm not certain how to do it when the starting number is >1 (i.e. 1 to 30). Thanks.

Random Number in an Interval:
((int) (randomGeneratedNumber * difference)) + startIndex + 1
* randomGeneratedNumber - Number >= 0 and <1
* difference: To generate between 10 and 30, (30 -10 = 20)
* startIndex: In this example, 10
* +1: Neccesary adjustment.
Example:
((int)(randomGeneratedNumber * 20)) + 10 + 1
PD. Int cast it's to generate int numbers, so it's optional.

Relation between FI and CO document number

Hi
I have Fi document number from BSIS.
Now i need to get the corresponding CO document number from COEP.
I used to get the currency dates from COEP by passing OBjnr from PRPS and KOKRS.
But the performance is very bad since the key field CO document number is empty.
Please let me know how to get the CO document number from FI document number
Thanks

Hi All,
To find link between FI and CO documents:
1) Go to "BKPF-AWKEY" in table BKPF ( FI document header   -> Reference key and AUAK )
     From here you get a reference document number.
2) Now for field name "REFBN" in table "COBK" you will get the CO document number in field
"COBK-BELNR"
<Reward request removed by moderator>
Thanks
Mahendra Joshi
Message was edited by: Vinod Kumar

Making a number unavailable between 1700 and 06.00

Similar Messages

Maybe you are looking for