Making an Array on or after frame 13 Invisible

I have a movieClip called "button" within another movieClip called "movie1_mc"
I want the "button" movieclip, which also loads XML on frame 12 of "movie1_mc to vanish on or after frame 13
This is the code I have in place but, "button" movieClip isn't disappearing.
This is my first time using XML and Flash so sorry If I'm way off the mark here.
//Code to "button movieClip disappear//
if (_root._currentframe == 13) {
var linkname:Array = [_visible=false];

arrays don't have a _visible property.  if the array elements reference objects that do have a _visible property, loop through your array and assign the elements their _visible property.
also, if you're checking a _currentframe for a timeline, you'll need that to loop unless you only want to check once.

Similar Messages

  • Batch rename, name changes after frame 99

    Hi, I put a folder into bridge to do a batch rename and called the text MILAN/SYRIA and gave for first number 00.
    After frame 99 the name changed to a weird  Adobe Bridge Batch Rename Temp 10037
    Which you can see better in the RAW windows, the 99 and the following one.
    Photoshop doesn't like to open a name like that, can't blame her.
    of course I strongly suppose that I should have given 3 digits in Batch rename, and l am looking for your confirmation, and while I am here
    why was my card full at 0485 pictures when a folder I think takes as many as 9999, how do you finish a folder if your card is full?
    i suppose you change card and you keep going with the same folder? Sorry about the camera question, couldn't keep it, thanks dona

    no,no, i started with 00 two digits only, batch rename changed to 623  after i put the folder back in just in order to take the screenshot, i dont know why but that always happens if i put the folder back in after usage, but i do know for life now that if I am going to take over 100 shots, which is most of the time, i should start with 001 or 000.
    See, this is the first number that was given to the first file,  01,WHICH actually became  00, i don't have it here.
    So it rest to know where is "Preserve file name " in current metadata, and would that make it possible  to revert to the original CR2 number?
    Why not to change name straight from the new name? thanks

  • Make frame invisible dynamically

    hello,
    does somebody know how to make a frame invisible dynamically? Some items in the frame are confidential;
    confidential items are put invisble for certain users;
    if all items in the frame are invisible i want the frame to disappear. Today i'am messing with stacked canvasses on top of the frame. Isn't their an easier way to do?
    chris

    you're wright this is simplier than my approach but
    my purpose was to have 1 content page/ or tabpage and no stacked canvasses at all; and a simply way to say to the frame
    frame.visible = property_false
    Today my tabpage has a frame the can become invisible conditionally.Designing tabpages with stackedcanvasses on it is NOT easy in the design editor.
    chris

  • Array stuff lost after finish loading a eventHandler.

    array stuff lost after finish loading a eventHandler.
    When my EventHandler for the Event.COMPLETE of xml
    URLLoader()
    finish running this:
    public function imageLoad(u:String):void{
    imgLoader = new Loader();
    imgRequest = new URLRequest(u);
    imgLoader.load(imgRequest);
    // imgLoader.content as MovieClip;
    trace(buffer.length);
    buffer.push(imgLoader);
    which load images into array, buffer.
    When I get back to constructor, there's nothing in the buffer
    array.
    WHy?
    thank you

    you're reinitializing buffer.

  • AS2, how to export audio after frame 1

    I searched the forum and only find AS3 solutions. Does anyone know a way to export audio for actionscript after frame 1? I unchecked the "Export on Frame 1", and what that did was to skip exporting my audio all together. "Export for Actionscript" is still checked, but I don't know how to tell it when, I guess, is the problem.
    I saw one thread that said to put the audio on the timeline, so I tried it, and although the volume slider still to worked with that metthod, but the mute button, which uses the Sound.start() and Sound.stop() commands, stopped working.
    Any suggestions? Thank you in advance!

    Oh, goodness, that's too easy Thank you, kglad!  I ended up creating a "container" movie that has the preloader in it and call the main movie from there, and that seems to work, too, but your solution is much better!

  • Object life in main method after frame created

    hi
    i'm having a slight problem with the life of an object i'm creating in the main method of my application.
    i have a JDesktopPane that is initialised in the main class's main method and constructor. within the main method i also add the first internal frame to the desktop.
    after the user completes the details of the first frame, another is called (from this first frame) and the first frame is disposed.
    the problem is that although all subsequent internal frames added to the desktop outside the main class, they are garbage collected with no problems (i'm using a profiler), however the first frame and the frame created from that first frame are never collected due to the reference maintained in the main class. i've tried adding the creation of these frames outside the main class but given that these methods are called from main the reference is still maintained.
    is there any way to create those first 2 frames without the reference being maintained in the main class such that they become elegible for garbage collection? do i have it all wrong perhaps and my approach is bad?? any help would be greatly appreciated.
    thanks heaps.
    Takis

    hi
    thanks for your reply.
    i tried that and it didn't work. the instance of that first internal frame is still there.
    i really am at a loss with this one.
    any other suggestions would be greatly appreciated.
    Takis

  • Vertex Array Object deleted after full screen RAM preview

    Hi,
    I'm writing a plugin where I use OpenGL VAOs. Everything works fine, also RAM preview, but when I cancel full screen RAM preview and render a new frame the VAO is somehow deleted. I called glGenVertexArrays for testing and the handle it returns is 1, which was previously the handle of my valid VAO.
    Has anyone had this problem?  It only happens when using full screen RAM preview. I also tested this in the GLator sample by generating dummy VAOs and it's exactly the same.

    Hi Rick,
    Thanks for the reply.
    I've changed the .mp3 file to a .wav file and that seemed to fix everything, for the time being...
    It previewed for 10 seconds fine, but after about 15mins of working on this the RAM preview area has started to shrink again and it's only previewing just over half (5 seconds).
    I changed my memory and allocated 4GB to other apps, also turning off rendering multiple frames... (by the way for some reason I can't get my 'actual cpu's that will be used' to change from 0? This seemed odd). Still no change.
    I've attached a screenshot of my comp details below, along with a shot of my screen when RAM previewing... (you can see the green bar does not go all the way). I'm not working with ANY footage which is why this is most peculiar, just the wav file so I can edit to the beat.
    Once again if there is anything else you can think of...

  • Trouble loading audio clips after frame 1

    Hey, everyone!
    The project I'm working on consists of a bunch of pages, each with narration.  Each page is a separate frame on my main timeline.  Due to all kinds of issues I was having, I am now loading in the audio via actionscript, rather than placing an instance of it into an object and going from there.
    The issue I am now having is that when I tried to simulate a download, the movie would sit on frame zero until all audio was loaded, so it took a long time to get to my preloader, and by then the movie was just about finished loading.  It was suggsted that I uncheck "export at frame 1" on my audio files, but now I am getting errors that I am making a call to a possibly undefined method (random audio file name of choice).
    If I am loading my my audio via actionscript, do I have to load it all in on frame 1?  And if so, is there any way for my movie to get to my preloader before trying to load things?
    I have also tried setting my publish settings to export my classes on frame 2 or 3, in the hopes of it getting as far as my preloader before stopping, but no luck so far.
    Any ideas?

    I'm not sure I understand that last part --
    Here's my setup:
    I have my raw audio files, which are each linked to separate classes, named Frame1, Frame2, etc.  Those classes are then called from separate movieclips (which also contain some actionscript to cue things in the movie at the proper time, etc).
    So, do I put every movie clip that contains the call to the classes (the movieclips that are actually used in the project) on frame 1 (or 2, or whichever frame I have it exporting classes from), or do I put all the raw audio clips on that frame, or do I just write in code to have random varables call in each class name...? 

  • Making pdf form non-editable after submission

    I created a form for users to fill in and submit by a "Submit by Email" button. The form is being send back as a pdf form in an attachment in an email. After we receive it back and have reviewed it and possibly making changes, we need to save it so the form fields are not able to be changed. How can this simply be done?
    Thanks,
    Chad

    FWIW, if your form does not have to be dynamic (grow, shrink, add fields on the fly), it is often better to create it in Acrobat. It's generally easier to create, easier to program, and will have much fewer backwards compatibility issues. There are a lot of things, such as flattenPages, that are available with Acrobat forms that are not available with XFA forms.
    George

  • Change the value of a uiXML frameset after frame displays.

    I have a frameset - after it displays the frames I want to change the targetframe in the frameset, is there a way to alter the
    bound value of the targetframe?
    is there a way on a page load to fire an event that would alter the targetframe? perhaps on a onload event for the uix page that
    loads in the center?
    for example, I have a center frame defined in my frameset:
    <center>
    <frame name="center" source="CenterFrameEmpty.uix">
    </frame>
    </center>
    the centerframeempty.uix has a menu that changes the center frame to a new uix page. Once I do this, I want to change
    the source from centerframeempty to the new name uix page I changed to..
    is there a way to do that?

    I'm not sure how to implement your suggestion. I have a uix frameset page,
    It has a top, center, and bottom.
    The top never changes, and in it I have a button to change the size of the center or bottom screens:
    <button targetFrame="_top" text="Max Bottom">
    <boundAttribute name="destination">
    <ctrl:pageURL name="WelcomeBase">
    <ctrl:properties>
    <ctrl:property key="bottom" value="80%"/>
    </ctrl:properties>
    </ctrl:pageURL>
    </boundAttribute>
    </button>
    When I replace the bottom/center frame with a new bottom/center frame and press the button it resizes it but displays what the welcombase.uix has as the center frame, which is:
    <center>
    <frame name="center" source="CenterFrameEmpty.uix">
    </frame>
    </center>
    <bottom>
    <frame name="bottom" source="BottomFrameEmpty.uix" height="35%" data:height="bottom@ctrl:page">
    </frame>
    </bottom>
    what I need to do, is keep the top frame the same, but change the source reference in welcomebase.uix to the new center frame and bottom frame so it is resized correctly.
    Understand?

  • Gui - making an array of JButtons to make a grid

    how do i declare an array of JButtons to make a 16x16 grid? here is an example:
    JPanel grid = new JPanel();
    grid.setLayout (new GridLayout(16,16));
    Container content = frame.getContentPane();
    ImageIcon icon = new ImageIcon("picture.gif");
    JButton[][] element = new JButton[16][16];
    for ( i = 0; i < 16; i++ )
    for ( j = 0; j < 16; j++)
    grid.add(element[i][j].setIcon(icon));
    content.add(grid);
    is that correct at all? it returns this error:
    'void' type not allowed here
    grid.add(elem[i][j].setIcon(icon));
    the caret points to the open parenthesis in setIcon(icon).
    if an array of JButtons doesnt work at all, is there an alternative? my program allows the user to arrange various bricks, etc. to create a maze.

    A 2-dimensional array of JButtons is perfectly possible, provided you write valid Java code. That's all the compiler is complaining about. And also, you forgot to create any button objects to go in the array. Try something like this:for ( i = 0; i < 16; i++ ) {
      for ( j = 0; j < 16; j++) {
        element[i][j] = new JButton();
        element[i][j].setIcon(icon);
        grid.add(element[i][j]);
    content.add(grid);That will get you started. Of course those buttons won't do anything until you add listeners to them, but that's your next challenge, I suppose.
    (By the way, there's a bug in the code that runs this forum. Wherever you see "<i>" in the code, alter it to use the correct rectangular brackets.)

  • Making an Array of Textblocks and displying on the screen when the app is running

    Hello everyone
    I am new to this UI development. I am making a reverse game model and I want show my
    character array contents on text-blocks. I want to make an array of these text-blocks  and show them on screen
    if there is another simple method please suggest me.

    Hello Madhusoodan,
    I'm not sure if you mean WPF application since I haven't saw anything related to WPF. A UI develop can related to so many UI technologies, for example, WPF, WinForm...
    Anyway, if you mean WPF application, you need to know how WPF can add controls at runtime.
    For example, if you have a Grid and want to add textbox, see here:
    https://msdn.microsoft.com/en-us/library/System.Windows.Controls.Grid(v=vs.110).aspx 
    // Add the TextBlock elements to the Grid Children collection
    myGrid.Children.Add(txt1);
    myGrid.Children.Add(txt2);
    myGrid.Children.Add(txt3);
    Just create a loop and put your array of textbox in to the grid:
    textarray[i] = new TextBox();
    textarray[i].Height = 30;
    textarray[i].Width = 50;
    textarray[i].MouseDoubleClick += this.OnMouseDoubleClick;
    uniformGrid1.Children.Add(textarray[i]);
    Regards
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Making an array of different user events refnums?

    Hello all,
    I have a question about dynamic user events. I have 6 different users events which I create, and would like to put into an array. (Such that I can use them in a For loop laters, taking off one event per loop and assigning it to a control of a vi) So far I haven't found a way of doing that since if I just wire the user events refnums to an array I get broken wires. (Similarly if I wire them to a build cluster structure.)
    I think that you'll understand what I am trying to do if you look at my labview code in the attached vi.
    In the vi I create some user events, and then wire them to the control of two vi's which will communicate to each other using these events. In the code you will see 6 Invoke Node structures where I use the "Ctrl Val.set" to pass the events to the two vi's. Obviously this is the wrong why of doing things. Since if instead of having 6 events I had 100, then I would need to put 100 Invoke Node structures on the block diagram (making it very large compared to the size of my computer screen!). 
    So what I would like to do, is put the user events refnums into a array, then put the one Invoke node structure into a For loop, and index the array to assign the events to the vi's programmatically. 
    Is there anyway of doing this? Or is there an alternative (/ better way) to what I have done?
    (Baisically I have 2 vi's that run in parallel and communicate to each other using user events. I need to pass the events to both vi's, how do I do it in the minimum of mouse clicks, and minimum of screen space.)
    Thank you!
    Paul.
    Solved!
    Go to Solution.
    Attachments:
    CameraTempControllerRunner.vi ‏49 KB

    I haven't created any new messages since the forum changed over, so I'm not sure.  But check on the menu under Options on the upper right.  I think there is a way to undo your choice and put it on another.
    Kudo's have replaced the stars.  Anything that was 4 or 5 stars is now equivalent to a Kudo.  But with the old system, anything less than 5 stars was essentially a negative opinion in the ratings.  So to simplify the multiple shades of gray (1 through 4 stars essentially being some degree of a negative) and to just eliminate the negative aspect altogether, the Kudo system was born.
    I don't know if the "Accepted Solution" designation does anything to help the person whose solution was accepted, but having that designation helps people searching the forum because they have the same problem find the answer quicker.
    Message Edited by Ravens Fan on 10-06-2008 10:15 AM

  • Resize of Frame after frame is created

    Hi,
    I have a tabbed pane inside a Frame. When I press one of the tabs I want to resize the Frame.
    Since the tabbed pane is inside the frame I use the following code:
    this.getParent().setSize(640,480); // This does not resize the frame
    this.getParent().resize(640,480); // This does not resize the frame
    I am using Swing.
    What could be wrong or how do I resize the frame after the frame has been created?
    Thanks.

    Hi,
    I guees I might have not told every detail.
    I have a class called TabbedPane that extends JPanel.
    This class then contains a JTabbedPane.
    I then have a JMainFrame that extends Frame that in turn creates a TabbedPane.
    Inside my TabbedPane class I listen to which Tab the user has selected, depending on which Tab I have to resize the Frame. Here is where I can't get it to work.
    if(index == 1) {
    Dimension d = new Dimension(640,480);
    setPreferredSize(d);
    updateUI(); // DOES not work.                              
    } else {
    Dimension d = new Dimension(400,400);
    setPreferredSize(d);
    updateUI();
    Please help :)
    Thanks

  • TextField object null after frame changes

    I have a dynamic TextField on a seperate layer so it appears in the frames I want. I can access the object from AS 3 and changes its text without a problem. Once the frames changes from 3->4->3 I can no longer access it. I get a null error.
    I'm making the change in another class:
    (root as MovieClip).lblScore.text = this.score.toString();
    If I look at root it shows that lblScore is null. This same line excutes fine prior to the frames changing.

    The text for the text field. I did get this to work by removing frame 4 and then adding a new keyframe to it. But for some reason it stopped working. I tried the same steps again. I right click on frame 4 and choose Remove frames. Now that there is no frame in frame 4 I right click the frame and choose Insert Keyframe but it still doesn't work.
    The value is set and displayed in frame 3, it changes to frame 4 and the value is gone. It goes back to frame 3 and the value is still gone.

Maybe you are looking for