Array stuff lost after finish loading a eventHandler.

array stuff lost after finish loading a eventHandler.
When my EventHandler for the Event.COMPLETE of xml
URLLoader()
finish running this:
public function imageLoad(u:String):void{
imgLoader = new Loader();
imgRequest = new URLRequest(u);
imgLoader.load(imgRequest);
// imgLoader.content as MovieClip;
trace(buffer.length);
buffer.push(imgLoader);
which load images into array, buffer.
When I get back to constructor, there's nothing in the buffer
array.
WHy?
thank you

you're reinitializing buffer.

Similar Messages

Exit Excel process after finish loading

Hi ,
my problem is how to exit the excel process after i import the excel file in forms 10g
, the file closed successfuly but the process still in memory
how can i kill this process after finish importing the excel file .

Why are you programmatically opening an Excel sheet in C# instead of using the DataFlow task with an Excel input?
Since your task is programmatically starting Excel via "new Microsoft.Office.Interop.Excel.Application();", it is your responsibility to stop it.
Please see "Quit":
http://msdn.microsoft.com/en-us/library/microsoft.office.interop.excel._application.quit(v=office.15).aspx

Connection lost after finishing a torrent download

Hi!
Everytime i finish downloading a torrent i get cut off from the internet. Every conncetion that ran while the torrent was downloading is still up, but i can't open any new ones. What this means in practice, is that after the torrent finishes I cannot open a webpage or ping, etc. I do not get a error message, just a blank page with my browser trying to load the page. This takes about 5-10 minutes, than its back up normal again.
My router is fine since I can still use the internet with any other device while having this error on my PC. I only have this when using Arch.
How can I fix this? I'm now trying to lower the maximum connections in my torrent client to see how that affects my problem. Any help is appreciated. Thank you.

ewaller wrote:
I am a little out of me league here, but... After your client closes, look at the output of sudo netstat -pl --numeric-ports and see if ports are still assigned to your client. Be careful posting the full output of that, it can reveal a lot about a system.
What does your network architecture look like?
Just checked, with the maximum connections lowered to 30, I have no open ports left open for ktorrent after closing it.. I don't really understand your second question

After installing Firefox6 many sites will not finish loading. I click on "stop loading this page" and then click on "reload this page" and the page loads. Also if I disable javascript the page will load.

After installing Firefox 6 MANY web site will not finish loading. I disabled all add-ons and still have the problem. If I disable javascript, the pages will load. When the page is trying to load, if I hit "stop loading this page" and then hit "reload this page", the page will load; but sometimes I have to do this 2-3 times for the page to finish loading. No problem with these pages using IE8.

I see that you ave changed some network.http prefs. 
Doing that can cause all kinds of problems because not all servers like such changes, so you can try to reset those prefs on the about:config page. 
network.http.max-connections 48 
network.http.max-connections-per-server 16 
network.http.max-persistent-connections-per-proxy 16 
network.http.max-persistent-connections-per-server 8 
network.http.pipelining true 
network.http.pipelining.firstrequest true 
network.http.pipelining.maxrequests 8 
network.http.proxy.pipelining true 
network.http.request.max-start-delay 0 
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

I lost my iphone the day after down loading from utune i got the bill but the songs r not at my itune account can u all put them there? I wont be buying any more if this cant be fixed.

I lost my iphone the day after down loading from itune but the songs aren't on my itune account but I did get a bill for the song. I did n't get another iiphone phone but I need my music put back on my account my iTunes account. If I'm paying for them! I want to music!

It's as simple as this:
Open iTunes.
Click iTunes Store on the left side of the screen.
Look on the left side - click Purchased (it has a NEW graphic next to it)
You will see everything you have every purchased from iTunes. You can redownload any of it.
Enjoy. Good luck finding your iPhone. If you get another one make sure to set up Find my iPhone as soon as you get it so you can track it down if you lose it again.

After upgrading to 12, I am not able to scroll in a tab until the tab is finished loading. For multiple tabs: any tab can be loading and all others lock.

Since upgrading to 12, I am unable to scroll in a tab until that tab finishes loading. Worse yet, I'm unable to scroll in ANY tab if one of multiple is loading. Further: I cannot even switch tab views if ANY tab is loading. I have not changed any settings. This only started when upgrading to 12. Oh how I would love to roll it back to 11. Is anyone else seeing this happen?

Please make sure that your settings are correct for session restore:
[https://support.mozilla.org/en-US/kb/restore-previous-session#w_troubleshooting]
If the feature has changed, this may have affected thesession. However for good measure I would also recommend an add on like Session Manager to keep back ups.
As for the back up you have access too, in order to restore sessions please see the profile restoration kb: [[Recovering important data from an old profile]]

Play Edge Animate content AFTER Page finishes loading

Is there any way, either in Edge or Muse, to have the edge animations wait until the Muse page finishes loading before starting to play?
thanks

I find no way within Muse to accomplish what you want.
In An you can always just delay the start of your animation(s) for a specificed time.
That may now work very smooth though because everyone's systems will load the pre-animation page at differing speeds.
I'm NOT a js coder but I was looking at some of the generated js code and I have a feeling a good js person could make your animation do what you want.
I see different 'load' perameters mentioned. Maybe one of those could be used.
I'll bet your answer is somewhere in that *_edgePreload.js file.
http://www.lynda.com/home/Player.aspx?lpk4=107145&playChapter=False
That video talks about turning off Auto Play in An and using js for control. It doesn't mention how to do it, just that it can be done.

ColdFusion with IIS URL Rewrite - Page never finishes loading

I am running CF10 on IIS 7.5 with URL Rewrite module installed.
All the rewrite rules work perfectly and ColdFusion is returning the correct pages. In order to get the page displayed in the browser I have to manually set the 'content-length' value in Application.cfc like this:
<cfcomponent>
<cffunction name="onRequestEnd">
<cfheader name="Content-Length" value="#getPageContext().getCFOutput().getBuffer().size()#" />
</cffunction>
</cfcomponent>
Without this code the browser does not display the page. However, even though it is now displaying the page, it is not doing it correctly. The page never finishes loading fully and not all of the HTML content seems to be on the page.
I have tried to add a <cfflush> tag after setting the 'content-length' but it makes no difference. I don't understand why this is happening but I know that it has happened to someone else who was using htaccess: http://forums.devshed.com/coldfusion-development-84/page-not-finishing-loading-coldfusion- and-htaccess-bug-575906.html
Can anyone please help?

Hi guys,
I would like to do url rewriting on our CF app but am worried I'll break something if I try and do it myself - is there anyone who would be interested in a bit of consultancy to help us achieve this?
I want to turn http://www.allchichesterjobs.com/search-results.cfm?sector=21&q=part-time-jobs
into http://www.allchichesterjobs.com/part-time-jobs
I've tried this using IIS and URL Rewrite, when I browsed to http://www.allchichesterjobs.com/search-results.cfm?sector=21&q=part-time-jobs
my browser was redirected to http://www.allchichesterjobs.com/part-time-jobs ok - but then I got a 404 error
I'm wondering if I can pay someone to remote view my screen while we talk on skype and tell me what to do?
Hope it's ok to post this sort of request on here
Thanks very much indeed.
Nick

Snow Leopard (10.6.8) Web Browser, App Store, iTunes Store image won't finish loading.

Hello,
I've recently upgraded from Leopard to Snow Leopard by clean installing. Once I upgraded to Snow Leopard (10.6.3) everything seemed to work perfectly except for the new keyboard that I purchased (requires upgrade to 10.6.8). So as I upgraded to 10.6.8 by "Software Update…".
Once the update was completed and the machine restarted I've noticed when I opened opened couple of common sites in Safari (such as: Flickr, YouTube, and Amazon) and some of the images won't finish loading with a "?" in the middle where the image would be and browser assumes that the site was done loading. First I thought this was a refresh problem so I hit refresh on the browser but nothing really happened. I thought this was strange so I decided to download Google Chrome and Firefox to try it out as well. Same situation as well… Then I opened the App Store and iTunes Store and the same things happened there as well. I'm assuming that all these images exists online so anything that access the web to load images will just crap out. One odd thing is that this problem don't seem to happen on any of the sites on Apple when I view it in the web browsers.
I couldn't figure out the reason so I decided to reinstall Snow Leopard (10.6.3) again by cleaning out the hard drives as before. Once it finished installing I opened up iTunes Store and Safari and the images loads fine. So went ahead (crossing my fingers) to "Software Updates…" to 10.6.8 and the the problem happened again.
I naively went ahead and tried to clean installing it again, thinking "Third time is the charm!" But same situation once I upgrade to 10.6.8. After the third time I let the browser sit there after it didn't load those images. I waited about five minutes and hit refresh and the images loaded. This happened the same with App Store and iTunes Store images as well. This is very odd because my interment connection hasn't been a changed before I upgraded to 10.6.8. Seems like browsers just cuts off the loading time of the whatever that's lagging instead on that site.
Is there a solution in the preferences for this or is this some kind of a bug that I'm having with my OS disc or network card? I don't think this has nothing to do with my modem or my interment service because it was working fine before I upgraded to 10.6.8.

I get that same problem too-you could try checking your network settings, release and renew your IP address, see if that helps. There is a tweaking menu you can get in Firefox that can help somewhat (google Firefox tweaks) but you'd have to raise the hood in FF and tinker a bit, but it does help. How much RAM do you have on your Mac Pro?, also update your Java and shockwave
sorry I can't be of more help
Jon B

Crash report when i sign out from app store after finish install mountain lion on my macbook pro retina. please fix this

Hi, I already finish download osx maountain lion after 2 attempts for my macbook pro retina. and when I want to sign out from my account at app store, it crash and some crash report show up. and if I sign in it happen also, but the app store still can be run after got the crash report, and I already sent the report to apple. do anyone got this problems ? and for apple : please fix this problems !

Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

FDM:Issue with Launching Essbase agg calc cript after FDM load complete

Hi experts ,
I am using a upshell batch to run FDM custom VB script to process 12 months data file which is running fine. All level 0 data is sucessfully loaded into Essbase.
But now the problem is to launch Agg calc scipt in Essbase. I tried 2 options but having following issues:
1-
If i am giving Agg script name in Validation entity and runs the load Up-To-Consolidate then FDM runs that agg script after each month load (ie: 12 times) but i just want to run that agg script after complete 12 months data load from FDM to Essbase.
Is there any way i can set Calc script to run after all data is loaded in Essbase ?
2-
If i call tha Essbase batch (which call MaxL to run the calc script) in AftLoad event script then again script is running 12 times after each load. Can you please suggest if i can modify the VB code with IFcondition here ? (ie: IF period is 12 then call \\Essbase server\***\.Batch) ? If possible please provide the sample code as i am new to VB ?
Please suggest
Thanks a lot !
Vivek

I guess you are using Batch Loader from your custom script??
Then you could use BatchAction to execute your maxl batch when the batch processing finishes.
In that way you would have only one execution after your 12 period file is processed.
I would suggest having a look to "Batch-Load Single Multiload File (Up To Check) Process" section in the FDM API Guide.
If your file is Multiload file you could also use MultiLoad Action Script.
For example, for multiload action you could say something like:
If Month(objLSItem.PstrTBPer) = 12 Then
That code checks period being processed is December (in case you load from Jan to Dec)
I hope that helps

Images in Firefox Nightly doesn't finish loading.

I have no idea why this is happening to me or how I can make it stop but... I have a really annoying problem with Firefox Nightly. Whenever there is an image, any kind of image, on a page it won’t finish loading approximately 99% of the time. It goes down maybe 20 inches and then all I see is the colour black, as if the loading sequence was interrupted or something.
I’ve tried clearing the history, cache, reinstalling Firefox Nightly and CCleaner to no use. My two or three addons that I use should not conflict with anything since I’ve been using them for a good while now.
Please help me!

If it works in Safe mode or with all extensions (Tools > Add-ons > Extensions) disabled then try to find which is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
In Firefox Safe mode these changes are effective:
*all extensions are disabled
*the default theme is used (no persona)
*userChrome.css and userContent.css are ignored
*the default toolbar layout is used (localstore-safe.rdf)
*the Javascript JIT compiler is disabled
*hardware acceleration is disabled
*plugins are not affected
*preferences are not affected

After i load a java application, it shuts off

I tried going on a chatroom where java is used. after it finishes loading the page all seems fine. after a couple of seconds java turns off and the chat screen goes black. Tried using it on IE and it works fine so i know its not the website.

check first if problem come from board or from other components not on the board
full restore your iphone and dont sync back the data * keep it fresh.
also change battery for testing.
i had same problem 2 days ago * phone goes to sleep and only wake up on charger. * i changed complete body with full flex and problem solved if problem not solved i refer to this article http://forum.shaarpmind.com/showthread.php/217594-iphone-4-keep-shutting-downi hope you problem solved with my suggestion and never forget to say thanks

All music links are lost after installing windows 7!!! HELP!!!

All music links are lost after installing windows 7!!! HELP!!!
I upgraded my system to windows 7 ultimate from Vista and installed itunes 64px. but when I copy the old itunes folder into D://music and opened itunes, all my music cannot be played. each link shows the mp3 location as: file://localhost/D://music/itunes... ... I ve tried deleting library file and copy/past the original one again. doesn't work. what should I do now. It's 106 GB songs. I cannot locate them one by one nor lose all my ratings and play counts.
please help me!!!!!!!! >_<

Was that Win 7 update from Lenovo, or Microsoft? If Lenovo, it should have installed those missing features. If it was from Microsoft, you have to manually install the Lenovo drivers and software.
The easiest way to do that is to first install ThinkVantage System Update and run it. It should download and install the other drivers and apps. I'm running Win 7 pro 64 on my T400 - a MS upgrade clean install, then TVSU installed the Lenovo stuff. Everything works.
Use the "SUPPORT" button at the top of this page, then "Download drivers and software" enter T400, install TVSU and you should be off to the races.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Using af:clientListener after page load

Hi,
I need to run a js function after* the page finishes loading.
I tried to use <af:clientListener type="load" method="fillProjectList"/>, but the script starts running before the table on the page finished loading.
The table has: clientComponent="true"
How can I make the script to start runng only after all table components are loaded?
Thank you,
Nina

Ah.. i guess it will not work as you cannot do any UI activity after the render response phase. May be try this
Javascript into JSPX and run after page is loaded?

Array stuff lost after finish loading a eventHandler.

Similar Messages

Maybe you are looking for