Making existing frequency become zero frequency

Hye. Help me, I got a probem on making the existing frequency from read from measurement data become zero. Is that possible?
Because the data should have 0Hz of its frequency. For now it have around 0.05Hz, so i want it to become 0. I has attach my snippet here. Thanks.
Best regards,
Fatin.

I recommend a simple software debounce. it has been very effective in the past.
any equipment that vibrates and product spurious edges on a tach or encoder.
see attached. it is a modified version of one from NI set n= 5 0r 10 for your case and see how it works
Stu McFarlane
Viewpoint Systems, Inc.
Attachments:
debounce.png ‏21 KB

Similar Messages

Target Cost in the settled process order become zero after cost deletion

Dear all,
User has standard cost estimates created in Jan 2010 that valid until the end of 2010 for every material in the system. user created a process order in April 2010. Target cost of the order was created based on the standard cost estimate and recipes as well as order qty. The order was also confirmed and settled in April 2010 without problem.
However, after I deleted all old costing estimates before I did a costing run for all materials in May 2010, the old order was resettled and all Target cost is removed from the order. I guess system try to look at April costing estimate but it is not there since it was deleted before I created the new costing estimate in May. Therefore, all varainces are throwed into remaining variances since the target cost become zero.
Other than mark the settled order for deletion or keep all old costing estimates, I am just wondering is anyway in the configuration to prevent the system to recaculate the target cost again for the settlement so I can avoid the problem happens?
Thanks.

Hi,
Target costs are only calculated after goods movements have occured on the order, the Target Costs are then calculated during the Variance calculation.
Target costs will only be calculated after the first goods receipt has been posted to the order. Also you have to ensure that the information to calculate target costs exists on the system in particular in OKV6.
This estimation is based on the customizing for the Target cost version in transaction OKV6 as in turn will the "real" calculation of the Target costs via the variance calculation.
So in OKV6 the Target cost will be based on preliminary costing on the order, an alternative cost estimate or the current standard cost estimate. Importantly if the choosen option is not fulfilled e.g. no current standard cost estimate, the target costs will not be predicted or calculated.
regards
Waman

Actual quantity in service tab page becoming zero after updation

Dear friends,
We updated validity start date, end date in header and the field "form.val.2" in service tab page in item details of a service line item(item category D) in a Purchase order using the function module 'BAPI_PO_CHANGE'. After updation we observed the actual quantity (which denotes the total GR qty) becoming zero, making the PO completely open and allowing creation of service entry sheet for full quantity. This happend for so many POs. Now we want to correct the actual quantity. But as it is in display mode it now become difficult to change the actual quantity through any function module.
Seeking for a genuine solution about how to correct the actual quantity.
Regds
Amitava

hi
check this sap note 938498 BAPI_PO_CHANGE: Reference update for a service item

I have problems saving powerpoint, they become zero bytes

Hi,
I have been having problems with powerpoint file, (also PDF files) I saved them at work on a USB stick using a Windows Computer, and some of the files become zero bytes after I tried to open them at home using Mac Air. I thought it was the problem of the USB stick but I just saved a powerpoint on OneDrive and the same problem existed again, the powerpoint became blank!! in zero byte.....Thankfully I can recover the file. But please can anyone help me to avoid this problem again??
Thanks.

jsoria1 wrote:
I was hopping that this were not the case and that QuickOffice Pro or Keynotes for the IPad were able to show Math equation that appear in a normal PowerPoint MOffice presentations (that is not much to ask, is it?).
If the apps which are supposed to be especially designed for MS Office stuff, like QuickOffice or Documents to Go or Office², fail to handle your PowerPoints, by all means go and complain to the people who make them.
To ask Apple for improvements in Keynote, you can go to this site (but in the end the compatibility of Apple's programs with MS stuff will always be only partial).
http://www.apple.com/feedback/keynote_ios.html

Value of Manual Pricing Condition is becoming zero while saving.

My clientu2019s pricing calculation requirement is complex. Here I am mentioning :-
We have one pricing condition type YPR4 which is header as well as item condition. Value will come only from condition record . So, we maintained access sequence in the configuration. Beside this we maintained u2018Manual entries u2018 in the configuration as u2018Not possible to process manuallyu2019. Condition record for this pricing condition type we maintain for line items.
We have another pricing condition type Y255 which is also Item condition as well as header condition. For this pricing condition value ( header level) can come from condition records if record exist , or , if condition record is not there or if user wants, user can enter value in header level of the sales order. For getting this functionality we maintained access sequence and u2018Manual Entryu2019 in the condition type configuration we have maintained as u2018No Limitationu2019.
In the line item level Y255 will come only if YPR4 is there for that item. The total value of the Y255 in the header will need to be distributed in the line items accordingly as per existence of YPR4 in the line item.
Issue:
Now the issue is that, when there no condition record for Y255 and when we are entering the value of Y255 manually in the header, the value of Y255 is becoming zero when we are moving from one screen to another screen in the same sales order , or when we are saving the sales order..
Can anybody suggest what we need to do so that manually entered value of Y255 remains in the sales order after moving to another screen or after saving the sales order ?

Hi ,
Please check the pricing routines funcationality which is assigned to both condition types.check the requirement and alt.cal. type routines of Y225 condition , on what basis condition record is updating manully entry as well as picking value from condition records.

Moving average price has become Zero

Hi,
Can you please help us , if you have any ...this kind of situation in your projects.
Scenerio:
We are using Workflow mechanism for creation material in Master data client
01. After creation of Material, it will go for approval (to six departments in SAP Itself ) and after their approvals,it will be moved to "Book of Records"( to Transactional client)
02.If the requester is submit the Material for approvals, it will create IDOC and will be moved to "Book of Records"( to Transactional client).
03.If any error is there in the Material views, IDOC will be failed in Outbond system( Transactional client)
in this case.We use BD10 to move the changes manually.
Problem is,
01.We moved manually 10 materials on 29/10/2008 through BD10 to Transactional client .in this case, we observed that, the moving average price(VERPR) ,Commercial price 2 (BWPH1),and Moving average price (if the price control is S) (SALKV) has become Zero.
Why ?
Why this 3 fields become Zero ?
Is there any link between these fields and How ?
Note: Price control "S" is maintained to the above all the materials.
Can any body help us to find out the reason ?
*What is the solution to find the Moving average price now and to update as on date ?
Is there any field , we can see the Moving average price in backend ?*
Your help will be highly appreciated.

Thanks for your answers, But..
There is a problem that we are supporting to China and they have a local ledger and they will calculate the actual costing based on tha moving price.Now these 10 Materials are Finished goods and are available in 30 plants each.
Taking the MAP from the each plant and calucating it ... is very problem and headache Job .
My question is ....
How it got deleted and why ?
Is there any relation between these three fileds ?
Easiest way of collecting the MAP ?
Any thought will get the appreciation..
Thanks
Raju

Moving average price has become Zero in Material Master

Hi,
Can you please help us , if you have any ...this kind of situation in your projects.
Scenerio:
We are using Workflow mechanism for creation material in Master data client
01. After creation of Material, it will go for approval (to six departments in SAP Itself ) and after their approvals,it will be moved to "Book of Records"( to Transactional client)
02.If the requester is submit the Material for approvals, it will create IDOC and will be moved to "Book of Records"( to Transactional client).
03.If any error is there in the Material views, IDOC will be failed in Outbond system( Transactional client)
in this case.We use BD10 to move the changes manually.
Problem is,
01.We moved manually 10 materials on 29/10/2008 through BD10 to Transactional client .in this case, we observed that, the moving average price(VERPR) ,Commercial price 2 (BWPH1),and Moving average price (if the price control is S) (SALKV) has become Zero.
Why ?
Why this 3 fields become Zero ?
Is there any link between these fields and How ?
Note: Price control "S" is maintained to the above all the materials.
Can any body help us to find out the reason ?
*What is the solution to find the Moving average price now and to update as on date ?
Is there any field , we can see the Moving average price in backend ?*
Your help will be highly appreciated.

Normally when you create a new material, you need to provide the price manually for the first time. Now since you said your price control is "S". Otherwise your IDoc should have a price for the Standard price when it is "S" and Moving Average price when it is "V".
It can be ZERO if you intend to create and release a std cost esatimte (For internally produced materials).

Net Value in sales order becomes zero after changing the employ responsible in Web UI

Hi All,
We are in CRM 7.0 with EHP1, when we change employ responsible in the sales order and save, Net value is becoming zeroes.
This is effecting most of the transactions. There is no custom development, every thing is standard.
Could any one suggest me this.
Thanks.
Best regards,
Hari

Hi Raj,
Thanks you for your reply.
Could you please let me know where I can see this combinations in configuration. Actually this is happening for standard transactions also.
I checked customer pricing proc for that BP and Document Pricing proc for that T type. They are maintained for the specific salea area.
Regards,
Hari

Confirmed quantity becomes zero in process order

What scenario did the confirmed quantity becomes 0 (zero) even though it has value upon the creation of the process order.
You can see the confirmed quantity on the material list of the process order. The RESB table for the component becomes zero. But how it was become zero was the very big question.
Thanks

please run CORT, put your oder number and have a look WHO and WHEN confirmed zero
also rum MB23 for your reservation, goto header and get the details

Making Condition base value ZERO in RF05L-FWBAS

SD-FI Integration masters -
I have a very typical requirement.
I need to have ZERO tax in Billing.
I have made the Tax Rate & Tax base Amt ZERO in RV60AFZZ. I have even tried giving a Tax code that has tax rate ZERO.
Both Invoice & Accounting document both have TAX AMT ZERO -
> BUT
In an accounting document when I click on Taxes (Radio button) [Display document - Tax Data]
It shows Base Amt [RF05L-FWBAS].
Pl let me know where and how I can handle this so it will become ZERO here as well.
This is creating an issue in Tax Report.
Thanking you in advance.
Arun

Dear Prasaad -
Thanks for you reply.
As mentioned earlier, RV60AFZZ has a code that makes Tax %, Tax Base Amt ZERO.
Even I changed the appropriate tax code that will make everything ZERO.
Both Invoice and Accounting document DO NOT HAVE TAX AT ALL & RF05L-FWBAS is having a value which I don't want.
Pl look into this & let me know if you need anything.
Thanks
Arun

Arp entries becoming zero

Hi,
We have Sun 1280 servers running in our lab. We observe that sometime arp entries for some interfaces become zero suddenly.
Here is the warning we observe in /var/adm/messages :-
09:53:50 ca-a ip: [ID 903730 kern.warning] WARNING: IP: Hardware address '00:00:00:00:00:00' trying to be our address 024.094.103.069!
14:32:17 ca-a ip: [ID 903730 kern.warning] WARNING: IP: Hardware address '08:00:20:ad:37:18' trying to be our address 024.094.103.068!
Any help ?
Thanks
Akhil Jain

Hello,
the default ARP timeout on the MSFC is 14400 seconds, or 4 hours. The CAM (MAC address table) default timeout is 300 seconds.
You actually might want to set the CAM agingtime to 4 hours as well, in order to avoid possible IP unicast traffic flooding...
HTH,
GP

Mass Contract Update - Item price become zero after Tax Code change

HI Guru,
I have issue on the contract net price which become zero after change in Tax code of item.
Took the opportunity to update contracts to reflect the changing VAT code (from V0 to V1 for some items) from the Trx code: MEMASSCONTRACT. However, having run the transactions (ME33K) above the contracts are now displaying zero prices on the Item Overview. The conditions are all correct (PB00) and the follow on purchase orders seem to be picking up the correct prices but we need to resolve the issue of zero prices on the item overview.
Please help me in this why it is happening like this? & what is the solution for it.
Thanks in advance
Praveen Katageri

Hi,
If pricing picking , just check validity period ( Valid from & Valid to) in condition of the Info record.Also check any scale is used & price active or not in condition of Info record.
Regards,
Biju K

Condition Base value becomes Zero

Hi all,
we created one routine to restrict usage of some condition types for Purchase Order . These are manual condition types .
Created one Rotuine in VOFM --Pricing.Wrote code in FORM KOBED_904 perform.Assigned routine in the M/08 Tcode for those condition types and in routine logic restricting condition types based on sy-subrc value.
when i enter another manual condition type in header for which the routine is not assigned the condition base value of the condition type to which the routine as assigned becomes zero. hence the condition value also becomes zero.
if i enters same in item level it is working fine.
Regards,
Ajay

Hi,
If u didnt assign routine also please check the sy subrc inside the routine and come out.
Regards,
Nandha

IC elimination : closing balance become zero

Hi BPC masters,
I currently have an issue with the Intercompany Elimination (automatic adjustment) :
When I run an IC elimination for 2014.12, all my data in the closing balance become zero. I do not know if the "force closing" in the business rule is related but I did not flag anything (see below).
Even worse, we tried it first in DEV where this issue did not appear but in QUAL, it just started.
As far as I know by reading forums, here are the following information :
I have the flow type OPENING and CLOSING.
The Destination audit in the business rule is IC. Nothing else was added.
The method-based multiplier is simple (see below).
Audittrail for IC is set as DATASOURCE_TYPE = A, IS_CONSO = Y and IS_TRANS = Y.
Audittrail for Input is set as DATESOURCE_TYPE = I, IS_CONSO = Y, IS_TRANS = Y, IC_ORIGINE = Y and COPY_OPENING = Y.
My logic script is the basic one with the currency conversion and consolidation (see below).
So, is there anything wrong with my settings ? Is there any other information that you require to find a solution ? What can I do to avoid the closing balance to become zero ?
Thank you in advance,
Dat

Hi,
Please check Note No. : [1171183|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1171183] and run the query mentioned in the Note.
If the query has result, you need to log a support ticket to SAP in order to get the issue investigated.
Regards,
Jitin
SAP Business One Forum Team

CRM_IC :: Net Price become zero after EDIT.

Dear All,
I am facing a problem that; in the transaction CRM_IC, when I create a Sale Order with one (or more) line item(s) and providing a valid value in the field Net Price. If we save it, it will get saved successfully. But If I press the EDIT button assosiated with the screen, then the Net Price will become zero.
Also it is observed that, the issue happens for German country and for rest it is working properly
Can anyboby help me..
Regards
Ullas Unnikrishnan

I solved this --- I noticed that I had siRoot.DocumentGrossAmountsIndicator set to false but creating the root node (newSI = SupplierInvoice.Create(siRoot)) turned that back to true again for no apparent reason. My guess is that having this set to true, i.e. all values are gross, dynamically sets all net fields to read-only. Once I discovered this it was as simple as setting the indicator back to false post-creation of the root node, and then net price fields were accessible again.

Making existing frequency become zero frequency

Similar Messages

Maybe you are looking for