Making New Signature Design the default

Good afternoon - I have installed a SAPGui 7.10 Compilation 3 Installation Server and I have installed the SAPGui on a frontend machine. It seems that you have to manually choose the SAP Signature Design in TweakGui before this becomes the default on that machine. I would like to be able to make this the default theme after installation so that users don't have to manually choose it. It there an .ini file or a registry setting where this is recorded so that I could push out this setting or set it during the install/update of the SAPGui?
Your assistance is appreciated!
Regards,
Blair Towe

Should be stored in HKLM (or HKCU) \Software\SAP\General\Appearance\UseSMCRendering with a value of 1.
Try note 1233328. Look under the "How to centrally activate "SAP Signature Design" section. It talks about writing a Script Event to add the registry key to your install package.
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1233328]

Similar Messages

New Signature Design = Fast?

Should the new signature design delivered in patch 11 also cause a speed boost? I don't have hard benchmark numbers before and after, but the GUI just feels more responsive on my machine after apply the patch and switching themes.
It could just be my development system is having a good day, but I'm just impressed at how quick the GUI comes back with app server responses.
Take care,
Stephen

Hi all,
as one of our tests we perform for each patch / compilation of SAP GUI for Windows we measure the performance (focus is on CPU utilization, memory consumption and used GDI objects). For SAP Signature Design we have measured the performance a number of times and have compared this to Enjoy.
During the early stages of SAP Signature Design development we have seen a big difference between Enjoy and SAP Signature Design: SAP Signature Design consumed a lot more than Enjoy.
Through various cycles of improvement and optimization we have managed to reduce the difference between Enjoy and SAP Signature Design to the values mentioned in SAP note 26417:
"When SAP Signature Design is activated SAP GUI uses about 12MB
additional memory and the CPU utilization by SAP GUI increases to
between 140% and 175% of the utilization when using Enjoy."
The 12MB are caused by additional lilbraries which have to loaded when SAP Signature Design is active. This additional amount of memory is not used per session, but only once for all sessions.
Therefore this should not be a big issue unless you are using Terminal Servers (on a WTS this may be an issue since many users on the same hardware will need the additional 12MB).
The additional CPU utilization is required for the different drawing mechanisms (e.g. the shadows) and we currently see no way to further significantly improve this.
To answer your original question:
Even though SAP Signature Design is looking faster than Enjoy, it is not. I think the modern optical impression of the new design helps to make it look faster and on modern PCs we do not expect any significant performance issues. Therefore you probably have the "feeling" that it is faster (and this is great since the impression of the end user is very important, too).
I hope that helps to answer the question.
Best regards,
Frank Krause
Quality Manager SAP GUI

HT1267 HAVE SET UP AN INCORRECT EMAIL ADDRESS. The call centre set up a new email address as the Username. I am unable to access the new account because the default on my phone is the email that is incorrect. How do I get the correct email as default

I HAVE SET UP AN INCORRECT EMAIL ADDRESS. The call centre set up a new email address as the Username. I am unable to access the new account because the default on my phone is the email that is incorrect. How do I get the correct email as default??

Thank you for your help, much appreciated
Regards
Geoff

!!!HELP PLEASE!!! HOW DO I MAKE MY NEW APPLE ID THE DEFAULT?

We moved and I had to changed my apple ID since I will be losing my former email account. I created my new apple ID, deleted (or so I thought) my old email account, changed it in iTunes, had to spend another $24.95 for iTunes Match with my new apple ID (rip off that I couldn't transfer the remaining months to my new apple ID) and this morning, I turned on my iMac and notepad and my former apple ID's were back. How do I set up changes to make my new apple ID the default?

It would have been easier to change the email address associated with your Apple ID instead of creating a new one.
As I understand it, anything you bought with the old Apple ID (music, apps, operating system) will forever be associated with that old Apple ID.

Replace SAP logo in status line in the new Signature Design (SAPgui 7.10)

Hello,
with SAPgui 7.10 there is a new desing available, the Signature Design. Recently a customer asked me, if it is possible to replace the small SAP logo in the middle of the status line (at the bottom of the SAP window) with another image.
I don't know this, has anyone an answer for me?

I doubt so (although I don´t know 100 %).
The bottom SAP image has the same functionality as before in the right upper corner (you can doubleclick it to send support messages to SolMan system). You couldn´t change the right upper corner image.
Markus

How can I set a custom Home Page while ALSO having a New Tab be the default Mozilla Page?

Why is the "home Page" = to a New Tab page? Why are they linked. I want my.yahoo.com to be my Home Page (currently set properly) but my New Tab page seems to be set to "Conduit" and has a search bar. I have no idea where that came from or how it got set that way. I want to have my current Home Page but make any New Tabs be the Mozilla Default Page with a Google search bar. Is that possible? I am running on Windows XP.

See also this article about the New Tab page (about:newtab):
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
You can check for problems with preferences and try to rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
See alao:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How can I return my new tab to the default blank page?

My brother did something which made the new tab page a Yahoo search page. I'd much rather it be the blank page, selecting the address bar. I downloaded the newtabURL add-on and selected the option blank page, highlighting the URL, along with some other stuff and saved it. When I restarted though, Yahoo was still my default new tab option.
I have no idea where this is coming from, I've checked my add-on list, control panel, and extensions list and cannot find anywhere he set Yahoo to do this.
Thanks in advance for your help, and please state some of the obvious solutions I might have overlooked.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How to change the page that opens with a new tab to the default thumbnail screen?

Some nefarious add-on appeared, so I deleted it. But I'm still left with it's search engine as my new tab page, instead of the default page with the thumbnails, which I infact really like.
This has happened before, and I don't know how to get rid of it without resetting Firefox and losing all of my bookmarks (I know I can back them up), cache and other shizzle.
So, how do I restore my new tab page to default?

*1 
'''''Download the [https://addons.mozilla.org/en-US/firefox/addon/searchreset/ Mozilla Search Reset]''''' 
This add-on is very simple: on installation, it backs up and then resets
your search preferences and home page to their default values,
and then uninstalls itself. This affects the search bar, URL bar
searches, and the home page. 
*2 
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

How to make a 2nd, new Photo Library the default on open

well, we've now reached 15,000 picts on my iPhoto and you know what that means.
I read MISSING MANUAL (pogue) and now how, with option-boot up, to create a new photo library. Very cool.
HOWEVER: I wish this new library to be the default library when I open up iPHoto 5.
How do do?
JON

JON,
iPhoto opens the most recently used library by default. So all you have to do is create the new library. When you Quit iPhoto, it will be set to open that library the next time you launch. If you want to open a different library, you will have to Option-Launch to select it.
Also, you might like to check out iPhoto Library Manager. It facilitates switching among iPhoto libraries. Plus, it allows you to transfer rolls and albums between libraries while preserving the keywords, ratings, titles, and other database information.
Regards.

Error loading control. a newer version needed. the default settings will be used

Hi I am using LabVIEW DSC 7.1 for programming my application. My VI contains NI hypertrend which I am publishing on a browser using the web publishing tool. When I open the web browser on a different computer I get this error- Component works Error loading Control. A newer version needed. The default settings for the control will be used. I have disabled firewall, pop up blocker etc...but for some reason it keeps giving me the same error. I read the knowledge base and it talks something about the .OCX file. I am not sure what I am supposed to do..I also have the DSC runtime installed in my machine. I'd appreciate it if someone could help me with this.

If you're on a 64-bit OS, OCX files must be in the folder: %windir% \ SysWOW64
and not in %windir% \ System32 (only for 32 bits OS)
>> %windir% is the environment variable that defines the Windows folder! (eg: C:\Windows)
French version:
Si tu es sur un OS en 64 bits, les fichiers .ocx doivent se trouver dans le dossier : %windir%\SysWOW64\
et non pas dans %windir%\System32
>> %windir% étant bien sur la variable d'environnement qui défini le dossier de Windows ! (par ex: C:\Windows)

Making Windows Media Player the default instead of iTunes

I posted this eslewhere but thought I should perhaps start a new topic - I want to make Windows Media Player the default player for WMV and WMA files instead of iTunes. How can I do this?
Thanks

Select a .wmv file in the Finder.
Get Info (command-I).
Expand 'Open with' by clicking on the little triangle.
Choose 'Windows Media Player' from the list of applications.
Click 'Change All...'.
All .wmv files will now open in Windows Media Player when double-clicked.
Repeat the same process with a .wma file.
Hope this helps.
M

Making Logic NOT be the default app fpr opening AIFFs

Hi Guys, been wandering this for a while - since starting using L7 Logic has been the default app that launches when i open an AIFF....Same now with L8.. I Can't ever remember choosing this behaviour & its a bit of a pain when i just wanna preview an audio file quickly outside of logic & either need to sit there for 2 minutes while the app launches or have to right click, then slide down to 'open with quicktime' every file (i'd prefer quicktime as a quick & easy app for this)
I have scanned every preference box I could see in both logic & quicktime (& searched via spotlight) but can't find an answer, anyone know of one?

Hi. There is no way I know of doing what you want to do.No overall setting I am aware of that is. The above things are on a per-instance situation. Not a global setting. But they do "change" the setting per-instance once set in the get info window.Which obviously doesn't apply to something newly created. It would be nice to know how to do what you want. Anybody know?? I don't//JON

Issue with adding a new value to the Default Login Page

Hopefully this is an easy one guys, I've added a select list item to the standard login page (P101) to allow the user to select a DOMAIN as well as entering their username and password.
When the next page is displayed and I try to retrieve the value held in the new field it has been cleared, but the values entered into items
P101_USERNAME and P101_PASSWORD are still present.
I can't figure out why the values held in items P101_USERNAME and P101_PASSWORD are still present but P101_DOMAIN has been cleared.
I've tried creating a value on page zero and writing the domain value to it using pl/sql and javascript but as soon as the next page is requested the value is cleared.
Any Ideas how to get around this????
Thanks in advance

I suppose your login page contains a process like this:
BEGIN
   wwv_flow_custom_auth_std.login (p_uname           => v ('P101_USERNAME'),
                                   p_password        => :p101_password,
                                   p_session_id      => v ('APP_SESSION'),
                                   p_flow_page       => :app_id || ':1'
   :t_random_number := :p101_random_number; /* this is something I added to my code */
END;Now, if you go to this page:
http://apex.oracle.com/pls/otn/f?p=31517:1
please note the random number assigned to you. Once you login, the same number will appear on the page 1 (near to the top).
So, that is how you could solve your problem.
   :t_random_numberis an application item.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

ANSI_WARNINGS is always set on new connections, despite the defaults

Hi, we need ANSI_WARNINGS off in order to truncate string columns.
The problem is that the ANSI_WARNINGS is always set on new connections. I checked that it is disabled in sys.configurations "user options" (value is 0). I double checked in SSMS DB properties and server connection properties.
Every time we create a new connection (even restarting SSMS and/or sql server) the ANSI_WARNING is ON again. We checked by running SELECT 8&@@OPTION and DBCC USEROPTIONS
-- This works, but I can't do it on every connection!
SET ANSI_WARNINGS OFF
Sql Server info:
Enterprise Edition 64-Bit
Product Version 11.0.5058.0 SP2

Hi, we need ANSI_WARNINGS off in order to truncate string columns.
No, you don't. ANSI_WARNINGS OFF is a legacy setting and should not be used with new development. There are several features in SQL Server that does not work when this setting is off:
* Queries to linked servers.
* Indexed views.
* Indexed computed columns.
* Filtered indexes.
* XML type methods and XQuery
And there are probably more.
As Tom says, take the bull by the horn and fix the code that causes truncation errors.
The only way with a .NET client to turn off ANSI_WARNINGS is to submit the command SET ANSI_WARNINGS OFF every time you connect.
Erland Sommarskog, SQL Server MVP, [email protected]

Default signature (the default cursive name) does not display on executed PDF

When I and my client e-sign a document with our default signatures (the default cursive name), none of our signatures displays on the executed (e-signed by both of us) PDF. However if I and/or client upload an image for our signatures and use it for our profile to e-sign the document, it does show up on the executed PDF.
The problem is I can’t ask everyone to upload an image of their signatures. The default signature (cursive name should show up on executed PDF. Any idea why it doesn’t or how to fix it?
Thanks for your help in advance.

Similar problem. The cursive signature and date stamp appear in Acrobat Pro, but not in Preview. I tried to sign in Preview Document Mode, as suggested elsewhere, and that did not work. This is a preloaded signature I'm working with. It worked on my first attempt when I created the signature. Perhaps that's the only thing that works.

Making New Signature Design the default

Similar Messages

Maybe you are looking for