Need help in enhancing CRM datasource /extract structure

Hello Experts,
I have come across an issue with a CRM DR phase 1 report "Program Status Management report".
The user wants to display Mobile number and Pager number of a contact person for the customer.
Contact person is a Business Partner (Mobile no, Pager no are attributes for Business partner), and the extractor which extracts communication information about a business partner is BUPA_DEF_ADDRESS_BW (from data source 0BP_DEF_ADDRESS_ATTR.)
This extractor only gets First Telephone number and Fax number from the table. The same CRM table also has the info about Mobile number and Pager number. But BUPA_DEF_ADDRESS_BW is a standard extractor.
From the searched forums, mobile number is stored in the field TEL_NUMBER from table ADR2 in which we need to filter the R3_USER = 3. We need to know how we can append/include this mobile phone/pager number fields in the extract structure since this is a standard extractor and might need to edit a BADI/FM. Please advise. Thanks!

there is no different as generic DataSource.
1. TC: RSA6, find your DataSource and click on " extend extractStructure" at the navigation bar.
2. TC: SE38 to write UserExit to populate the data for append fields.
UserExit: ZXRSAU01 if your DataSource is for Transaction Data
ZXRSAU02 if your DS is for Master Data
hope this help

Similar Messages

Crm datasource extract structure &communication structure

hello all,
how to find standard datasource extract structure in CRM.
its very urgent.
i will give full points.
advance thanks to all.

hi,
check out the following link to know about the CRM BI Conetnt all(infocubes, datasource, roles)
http://help.sap.com/saphelp_nw2004s/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
hope this help you
regards
harikrishna N

Need help on the correct directory extract structure for SP15 .SAR files

Hi all,
With the help of many here I have been able to finally download all the SP15 files I need for my EP 6.0 on WAS 6.40. I am currently on SP11 for both EP and WAS and want to move up to SP15.
I downloaded all the .SAR files and did SAPCAR -xvf all from within a temp directory I created. Yes, some of the LABEL.ASC files were being overwritten.
After all the extracts, I ran SAPINST and it did start, but unlike when I ran SP11, I had options for KM, EP, Tools, etc. This time it only presented me with options for the WAS and the first option was "Import Support Package 15" (with the other options being for dialog instances). There was nothing about EP, Tools, KM, etc.
I ran the Import option and it completed successfully. I then thought it either did everything or if I reran it the other options (for EP, KM, etc.) would now show up. Of course, I was wrong.
So where am I exactly going wrong regarding extracting all the .SAR files into the proper directory structure so that SAPINST runs correctly?
Please help if you can.
Many thanks,
Mike

Hello Mike,
I think you extracted the files for the J2ee engine. Generally you will have a different SAPINST for Portal. Please refer the stack guide for SPS15 Page 22 for the files you need and the procedure to apply it.
satck guide can be found at http://service.sap.com/instguidesnw04 --> under maintenance
regards
Mahesh

Changes in Logistics DataSource Extract Structure

Hi All,
We intend to transport our enhanced extract structure of our Logistics DataSource. We know that extraction queue and delta queue must be emptied first before the transport starts.
However, we are wondering whether a re-INIT of delta also must be done or not. At this moment, we have delta up and running already.
Please advice. Thanks.

Hi Reddy,
Thanks for your fast reply.
No, we don't need that historical data. Perhaps, to be more specific, we are wondering whether a Re-INIT without data transfer should be done again or not ?
We have two cubes. One is old one with up and running delta. The other is new one which we are going to transport soon.
So, we plan to use same delta infopackage later for these two cubes.
The concern is now about the delta.
Please advice again. Thanks.

Need help for SRM-6 Data Extraction into Bi-7

Hi Experts,
I am looking for help regarding SRM DataSource Extraction to BW. I am working on BW project and need to extract data from SRM Data Source 0BBP_TD_CONTR_2 and 0SRM_TD_PRO. I need to know about the extraction process from SRM. Is there a tool available like LO Cockpit in SRM for extraction and how can we manage the delta in it. Or i can use the T-code RSA5 for that and follow the normal process. If I can get some documentation that can give me an idea for data extraction and delta management in SRM that would be appreciated. Any kind of help will be welcome.
Thanks in Advance.

Hi,
May help you:----
How to extract data from SRM into BW system.
SRM Audit Management Data Extraction into BW
Procedure for standard data source extraction from SRM to BW 3.5.
Regards,
Suman

Need help with enhanced data source in Production system

Hello Gurus,
1. I enhanced a datasource in BW and populated the field using customer exit using CMOD function. In Dev system, i dont have much data, so I deleted the whole data and did full load.
what shud I do in Production side, so that Delta wudnt be affected??since in production, we have millions of records, we wont do full load., what is the best way to populate the field in production after transporting the datasource to production without disturbing delta's, to reflect the new field for previous years data???
2. can we put 0customer and 0material in the same dimension?? how its going to affect the performance?
Thanks in advance.,
Best Regards,
Pavan

Hi,
Please see this
1.
see this thread
populated the new field with historic data
2. can we put 0customer and 0material in the same dimension?? how its going to affect the performance?
Its better not to use them in a single dimension because one customer and take more than one material so if you have 100 customer and 1000 materials this combination will generate a large number of records. Its always better to keep characteristic which are having 1:N relation ship in one dimensional in you case customer and material will have an M:N type of relationship.which will result in slow performance.
Regards,
Ravi

Need help for use crm fields into EJB2

hello i need help.
i have one db table (table_1):
id_1
field_1
nad the second table that depends from the tale 1:
id_2
fields
id_1
id_1 is the field that join the table 2 with the table 1.
can anybody helps me to implemet this relationship into the xml files and into the java class?
into the java class for the second table i have:
public abstract long getId_1();
public abstract void setId_1(long Id_1);
public abstract long getId_2();
public abstract void setId_2(long Id_2);
public abstract String getField();
public abstract void setField(String field);
how must i reference the relation into the bean and into the confdiguration xml files (i use Weblogic 8 and EJB 2.1)
Thanks

SRM doesn't use kind of "cockpit" LO-like in ECC.
Overall picture:
http://help.sap.com/saphelp_srm40/helpdata/en/b3/cb7b401c976d1de10000000a1550b0/content.htm
If you setup data flows accordign Business Content of SRM:
http://help.sap.com/saphelp_nw2004s/helpdata/en/3a/7aeb3cad744026e10000000a11405a/frameset.htm
Then just perform an init load and schedule the deltas.

Need help with enhancement with CIC0 in CRM

HI
Anyone knows any enhancement points or BADI with transaction CIC0 of the Locator?
Any help is appreciated!
Points will be given for useful info.
Thanks!

Hi,
There is a BAdI BUS_LOCA_HIDE_SEARCH which can be used to hide unnecessary search types and search ids.
In case you would need to enhance the locator with new search types and Ids I can help you with some documents for this. Let me know you e mail id for this.
Regards,
Sudheer.

Need help on enhancement of 0CO_OM_OPA_1 with Material and Plant

Hi,
I have a requirement that need to build a BW report which shows Actual costs and Planned Costs of Service Orders. We are getting Actual costs from 0CO_OM_OPA_6 and now i am getting planned costs from 0CO_OM_OPA_1. For actual costs we are getting Service Orders, Material and plant from Satandard DS 0CO_OM_OPA_6. Where as For Planned Costs standard data source 0CO_OM_OPA_1 is not having Material and Plant information. For this we decided to enhance 0CO_OM_OPA_1 with Material and Plant.
But we are not sure the source tables for material and plant and the logic to extract these data from the tables. Can anybody please help me out.
Thanks for your supprt in advance.

It's possible you may need to use a CO-PA (profitability analysis) datasource instead of 0CO_OM_OPA_6. 0CO_OM_OPA_6 extracts data from CO tables.
Based on the path you provided "...Profit. segment...", the requested data might exist with CO-PA.
If you determine the required data resides in CO-PA, you'll have to create a datasource based on the operating concern. You can perform a search within the online docs for steps to create this datasource.
Hope this helps.
Rod

Help in enhancing CRM logon function module

Hello all,
We have a situation where in the past we have allowed the creation of multiple Business Partners sharing the same e-mail address. We are about to close this loophole but we have this as a master data issue for some existing Customers/Business PArtners.
Currently, our CRM Webshop only uses e-mail address and password for login verification (not using Business Partner/Customer number).
We would like to enhance the webshop logon to include customer number as well ie. We want to determine which customer number associated with the ambiguous e-mail address is used. I have attempted to identify which function module is involved by inserting an endless WHILE loop into the following , but none of them seems to be called :
CRM_ICSS_USER_LOGIN
CRM_ISA_IUSER_LOGINr
CRM_ISAI_BP_LOGIN_BPARTNER_GET
CRM_ISA_BP_LOGIN_CHECK
CRM_ISA_LOGIN_R3USER_CHECK
CRM_ISA_IUSER_LOGIN
CRM_ISA_LOGIN_CHECK
CRM_ISAI_BP_LOGIN_BPARTNER_GET
In addition I notice the function SUSR_CHECK_LOGON_DATA can not be enhanced as it's a Basis FM.
I have attempted to look up documentation in SAP Help and not much joy. Can anyone tell me whether I'm barking up the wrong tree and this needs to be addressed by a kernel level function or recommend another place in the standard code ?
Regards,
Gabriel

Hi Pooja,
Please follow the below steps to create a function module :
1. Goto Transaction code : SE37.
2. Create a Function Group first.
   a) From the Menu Bar Choose Goto -> Function groups -> Create group.
   b) Specify the function group name and a short text.
   c) Choose Save.
When you create a new function group, the system automatically creates a main program containing two includes. Like any other programs and includes, you can display them in the Repository Browser.
3. Now create a Function Module.
4. Enter the function's name in the field Function module.
5. Choose Create.
6. In the Enter function group dialog box, enter the function group to which you want to assign the function module.
7. In The Attributes Tab select Remote Enabled Module (since you want a RFC function module ).
8. Give the Import and Export parameters and exceptions(if any).
9. Write the functioning part of the fuction module in the Source code tab.
10. Save and Activate your function Module.
Now go ahead and use your function module where ever you want.
Hope it helps.
Reward if helpful.
Regards
Hemant Khemani

Need help on enhancement PPCO0012

Hi All
I have implemented the enhancement and used the Function exit & Screen exit and created and custome screen.
but when i am going into the CO03 transactrion the fields are still in editable mode.
Please help in making the fields ready only in CO03.
Thanks a lot.
Regards,
Sreeharsha
Edited by: Sreeharsha Naga on Jan 22, 2009 6:09 AM

Hi,
Sorry the Tcode should have been 'CO03' and no 'SO03'.
When the value of SCREEN-INPUT is changed to 0 the field becomes of type "Output Only". So it should work.
Say the screen field that you want to modify is named 'ZZX1'.
The piece of code should look something like:
LOOP AT screen.
IF     screen-name EQ 'ZZX1'
AND sy-tcode       EQ 'CO03'.
    screen-input = 0.
    MODIFY screen.
ENDIF.
ENDLOOP.
If the above does not suit your requirement the you can try using the structure 'RC27S' (but first check if the structure is globally available in the Function Exit or the Screen Exit). There are two fields 'AKTYP' and 'AKTYP_PIC'. Both these fields show the transaction status and screen field status. So instead of sy-tcode you can also try using RC27S-AKTYp or RC27S-AKTYP_PIC as the need may be.
Hope this helps.
Regards,
Abhisek.

Need help in the CRM Business Package Configuration in EP

Hi,
I have uploaded CRM BP 60.2.3 on EP 6.0 WAS 6.40. I have configured and assigned the WAS System parameters and CRM System parameters. But still, when I preview an iview for ex. B2B Shop, the following portal runtime error is coming.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Could not find portal application com.sap.pct.crm.crmcontext.
Exception id: 09:19_29/09/05_0008_8412351
See the details for the exception ID in the log file
Please help me out in this problem.
Thanks much in advance,
Sunitha.S

Hi Siddarth,
The BP installation was successful. I have configured and assigned the CRM System and did the user mapping too.
I still am getting the Portal Runtime Error as below:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Unable to lookup System 'SAP_CRM'. Please check the system object and the alias..
See the details for the exception ID in the log file
Is there anything else, which needs to be configured in the CRM System like services etc?
Please help me out in this regard..
Thanks much in advance,
Sunitha.S

Need help in SAP CRM

Hi guys,
I am working as a technical consultant in ABAP. Now i want to change my career to SAP CRM as a techno-functional. I worked as a CRM technical consultant (IC WebClient) for 1 year also. I faced some interviews in SAP CRM but they are not asking me about technical's upon which i worked for the last 1 year. Anybody there can suggest me how can i pursue my career in SAP CRM. Guys, anybody can provide me what type of questions i have to face in an interview.
POINTS WILL BE REWARDED.
Thanks in Advance,
Santosh

Hi Santosh,
As a SAP CRM Functional Consultant you need to have the following knowledge.
1. You should be in a position to talk about the business process of the various Industries.
2. According to that you need to suggest where SAP CRM fits for their business requirement.
3. How can we Configure SAP CRM to suit the requirements of the client.
4. The basic functionality of SAP CRM - Marketing, Sales, Service & Analytics.
5. The functional process of Marketing, Sales, Service & Analytics.
6. Sales & Service scenarios based on IC Win & Web Clients.
7. Mobile Sales & Internet Sales Processes.
I hope you may aware that where an ABAPer fits in these solutions.
Majorly you should be in a position to aware that the Standard Configuration settings which are provided by SAP CRM.
You may follow the Best Practices for more information.
Hope I have answered.
Best Regards,
Johnny.

Need help in file content conversion complex structure

Hi Guys ,
Iam new to this file content conversion , Please let me know whether below requirement is possible .if yes than how ?
Inbound XML file from Proxy
<Data>
<keyfield1>0011</keyfield1>
<keyfield2>0012</keyfield2>
<Keyfield3>0013</Keyfield3>
<field1>Test1</field1>
<field2>testfield1</field2>
<field3>0001</field3>
<Data>
<keyfield1>0021</keyfield1>
<keyfield2>0022</keyfield2>
<Keyfield3>0023</Keyfield3>
<field1>Test2</field1>
<field2>testfield2</field2>
<field3>0002</field3>
output pgp flat file .
pgp file format should be as below after file content conversion
0011|0012|0013|Test1||||||
0011|0012|0013|Testfield1||||||
0011|0012|0013|0001||||||
0021|0022|0023|Test2||||||
0011|0012|0013|Testfield2||||||
0011|0012|0013|0002||||||
thanks a lot .
Regards
Prabhu

Hi.
Try this.
First you need to use a message mapping and create a target structure to convert a similar output structure that do you want. like this
<Target>
-- Field1
-- Field2
-- Field3
-- Field4
-- Field5
-- Field6
-- Field7
-- Field8
-- Field9
</Target>.
Then map
keyfield1-> Field 1 ,keyfield2-> Field 2 , keyfield 3---> Field 3
map field1-> field4 .. for the others fields duplicate the Target node (right click) and map map field2-> field5 ..etc.
For the field 5 until field 9 map with constant ("'')
Then in you receiver comunication channel put simple parameters.
Target.fieldSeparator = |
Target.endSeparator = 'nl'
Regards.

Need help in enhancement in EHSS

Hi All
we have Custom tab added for incident admin work list along with other tabs(basic information , Investigation etc ) . where in user enters some values and set a flag A,B or C .
now based on the flag set i have to change the F4 values of the employees dynamically .
for this i have created a singleton class and reading the context value from the custom web dynpro and passing it to the attribute in singleton and reading it in the get_data method of CL*PERSON*FRM* passing the search help dynamically to the investigation lead field .
the issue is the enhancement which is written in the get_data method is not triggered always i am missing this for some of the incident categories say "minimal accidents" etc .
is there any way where i can set the search help in the webdynpro level accesing the fpm~getdata tables ?
like process_events ?
please suggest me some input so that the dynamic population of search help functions irrespective of actions ( events ).
Thanks ,
Venkat Ratnam Naidu

Develop freestyle GUIBB accessing BOPF Object EHHS_INCIDENT data
Hi Venkat! I´m looking for examples about the implementing a Freestyle GUIBB inside an EHS Incident Report Screen. I´m new in EHS development, and I don´t understand how to implement /BOFU/CL_FREESTYLE_BOPF_HELPER class to handle the data referred to the incident.
I recently created a thread: FBI Freestyle Helper Sample Implementation
The Freestyle GUIBB has been implemented, but I can´t access any data of the BOPF Data Model.
I appreciate some help, thanks!!!

Need help in enhancing CRM datasource /extract structure

Similar Messages

Maybe you are looking for