Manage Site window is empty
Hi!
Usually, when DW 8 start, it shows the default site files
hierarchy.
This morning it appears display the computers drives and
network mapping.
When clicking the menu > site > manage sites, it
appears empty, while usually had at least 5 definitions of sites.
Can any one say what happened and how to restore it?
TIA
Nanu
> when I select "Manage Sites," the Site window is
> empty
Then you either didn't define a site, or there was a windows
Registry hiccup
and it disappeared.
You mentioned the Files Panel.
Are there Files in the DW Files Panel??
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/
Similar Messages
-
DW 8 Manage Sites Window Problem
I started an earlier thread on this and realized my question
was misleading so I started a new thread.
Let me be more accurate about what's happening. The Manage
Sites window opens fine. When I click the New... or Edit...
buttons, it takes about 20 seconds for the Site Definition window
to open. When using the Edit... button it makes no difference which
of my sites I'm trying to edit. All current sites and a new site
all go thru the same delay. The other buttons - Duplicate, Remove,
Export..., & Import... - all work normally & immediately.
I'd sure like to resolve this problem.
Thanks,
JimAre all of your sites on your local computer, or are they on
a remote,
shared network drive?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DWDreamer" <[email protected]> wrote in
message
news:f1q31r$o67$[email protected]..
> BTT. Hope someone can help me resolve this issue.
>
> Thanks,
> Jim -
hello,
I am creating a new website for my work, I am new to flash
and I seem to have done something unexpected.
I created a flash document, uploaded to my server bin, all
went well. Until I noticed I wanted to change one of the words. So
I made the changes and tried to update the flash document.
I don't remember my exact steps but I found myself entering
my ftp info and whatnot in the manage sites function of flash,
thinking this would connect to my remote host and update the flash
document.
Now when I goto dreamweaver my files view is completely
different. My site's root folder is no longer viewable in the files
area. When I goto the manage sites the list is empty, no site
folder. What did I do? I can find the sites folder in my FINDER but
in dreamweaver I can't.Do you see this site's name in the list of sites?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"iPAGEbreak" <[email protected]> wrote in
message
news:gh6139$t2g$[email protected]..
> Yes. I'm not sure what has happened. I no longer have
the local/remote
> view
> options in my files list window.
>
> I still have all the html files, do I have to recreate
the site somehow?
>
>
quote:
Originally posted by:
Newsgroup User
> Did you have a defined site in DW?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "iPAGEbreak" <[email protected]> wrote
in message
> news:gh533l$n80$[email protected]..
> > im sure this is something i really didn't want to
do. my manage sites
> > list
> > is empty in dreamweaver but i still have the files
on my computer. is
> > there anyway to get them back to how it was
originally?
>
>
>
>
> -
I have a new hp tower running windows 8.1 and have been trying to install the adobe reader. The installer downloads (1meg) and I choose to run it but it just sits with an empty screen. I've checked task manager and it takes up memory but does nothing. After letting it run for 3-4 minutes I kill the task. What can I do to get the reader installed on this machine? I've tried using chrome, firefox and explorer and get the same results with each.
Try the offline installer from http://get.adobe.com/reader/enterprise/
-
After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
When i login i get the following message:
The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
I checked the following:
I am a administrative user in SCCM (Full Administrator)
I am a member of the administrator group on the server
Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
I tried to start it on multiple workstations and deleted my roaming profile
Any more suggestions?Hi,
Maybe you could have a look on the below blog.
http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information
may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Manage Sites - How to define skeleton
Hi all,
My apologies if this has already been answered, I just can't
find it, and googled all day today to find a solution, so you guys
are my last resort.
I do like the Manage Sites option, and use it quite
extensively (Win/Mac Platform). Now I would like to be able to
specify a default folder structure to be created everytime I create
a new Site. Basically cutting out the middleman, creating the
folder structure first in Windows Exploder and then having to go
back to dreamweaver and pointing to the 'doc root', is quite
repetative.
If I recall it correctly, the New Site Manager creates by
default just the docroot, and if specified the images folder. Is
there a way to have a predefined folderstructure created, everytime
I create a new Site with Site Manager ?
I simply refuse to believe that Adobe / Macromedia overlooked
such a useful feature.
Any help or pointers to plugins is greatly appreciated
Windows / Mac : Dreamweaver CS3
Thanks> Now I would like to be able to specify a default folder
structure to
> be created everytime I create a new Site.
Can't be done.
> If I recall it correctly, the New Site Manager creates
by default just the
> docroot
It doesn't create anything. You do.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"BlueNC" <[email protected]> wrote in
message
news:g66i3h$6fp$[email protected]..
> Hi all,
> My apologies if this has already been answered, I just
can't find it, and
> googled all day today to find a solution, so you guys
are my last resort.
> I do like the Manage Sites option, and use it quite
extensively (Win/Mac
> Platform). Now I would like to be able to specify a
default folder
> structure to
> be created everytime I create a new Site. Basically
cutting out the
> middleman,
> creating the folder structure first in Windows Exploder
and then having to
> go
> back to dreamweaver and pointing to the 'doc root', is
quite repetative.
> If I recall it correctly, the New Site Manager creates
by default just the
> docroot, and if specified the images folder. Is there a
way to have a
> predefined folderstructure created, everytime I create a
new Site with
> Site
> Manager ?
> I simply refuse to believe that Adobe / Macromedia
overlooked such a
> useful
> feature.
> Any help or pointers to plugins is greatly appreciated
> Windows / Mac : Dreamweaver CS3
>
> Thanks
> -
Lenovo Mobile Broadband Connection Manager for Windows 7 - ThinkPad
Hello
i want to ask a Question , why Lenovo Still did not make
(Lenovo Mobile Broadband Connection Manager for Windows 7 - ThinkPad ) ??!!!
i look at the Drivers PageAnd i only found this : For windows VISTA and XP :
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70946
BUT , Where is WINDOWS 7 VERSION ????!!!!!!!!, What are they doing all this time ???
is this the Support which Lenoveo Give to there Customers? , i hope not .
I am asking lenovo to give me as a Customers , the software i need as fast as possible .
Greeting,
Al-allan Alaa
Solved!
Go to Solution.Try this URL:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=HT037696#broadband
-gan -
Battery gauge error running Power Manager for Windows XP version 5.20
Last week on my R61 (8932-CTO), Update Retriever and System Update requested that I download and install ThinkPad Power Manager for Windows XP version 5.20. After rebooting, I immediately received an error box with the following message:
An exception occurred while trying to run"C:\Progra~1\ThinkPad\UTILIT~1\PWRMGRTR.DLL,PwrMgrBkGndMonitor"
As a result of this error, the battery gauge no longer displays correctly. The space where it used to be is blank, but clicking the empty space still gives you the option of starting Power Manager.
What is puzzling about this is that version 5.20 is not available in either in the Driver Matrix, nor on the Downloads and Drivers web page. The version of the software that is presented there is version 5.13.
The driver for ThinkPad Power Manager for Windows XP - version 5.20 can be downloaded from:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghu704ww.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/ghu704ww.txt
Another interesting point, is that this version of the driver has, as yet, not been presented to me on my R500 (2714CTO), although both machine types are listed as supported models.
Why are Update Retriever and System Update downloading software that apparently has not been officially released yet? Why is this only happening on my R61 and not on my R500?
And last of all, why has his software been released when it seems to have an obvious problem?
Any explanations would be appreciated.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD'sI just wanted to confirm that the last working version for Windows XP is version 5.05 revision 04.
It can be downloaded from Lenovo:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g6u702ww.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g6u702ww.txt
Cheers! -
Power Manager for Windows Vista - ThinkPad
The link show the update is for a T61p, running Vist,
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70601
But once the download is done, the system refuses to install the v2.50 - why is that ?
The pc is aT61p, vista Ult., with PMgt 2.3.Hi Ran,
Thanks!
I haven't tried it yet.
In the meantime i did more testing and found out that even with only Power Manager version 2.41a installed the latest Intel Pro wireless driver also supported by lenovo is not stabel and FN-F5 or windows network connection also fails to switch the radio back on after a reboot when the radio has been turned off first ;-(
Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283
over and over I decide to revert back to the old Intel wireless driver listed on this page.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67256
Reinstalled ThinkVantage Access Connections for Window Vista version 5.12
I tested it again........ IT WORKS!!!
Please try this combination:
BIOS Version: 1.15
Bluetooth with Enhanced Data Rate Software II for Windows Vista Version: 6.2.0.5000
ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62
ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE Version: 1.52
ThinkVantage Productivity Center Pack Version: 3.02
Power Manager for Windows Vista Version: 2.41a
ThinkVantage Access Connections for Windows Vista Version 5.12 !!
Intel Wireless LAN (11abgn, abg, bg) for Windows Vista 11.05.0 API
Regards,
Ritchy
Message Edited by Ritchy on 01-14-2009 11:56 PM -
How does new/manage site work on CS5
I am designing an ebook on dreamweaver for ICT coursework. I want to know how new/manage site works because this feature is how you save your work. When I try this, I get an error message saying that 'unable to write cache file'? Am I doing something wrong? What does this message mean?
The cache file is written to the user's personal configuration folder. On a Windows system, this is is in the user's hidden AppData folder. On a Mac, it's in the user's Library/Application Support folder (also hidden on recent versions of Mac OS X).
It sounds as though you're trying to do this on a network system where the user doesn't have permission to write to the necessary folder. This question belongs more in the main Dreamweaver CC forum. If you need further help, I suggest you post a follow-up question there. -
Sites (in manage sites) missing AND folder unreadable?
All right, so I finally had the dreaded disappearance of all my sites in the "Manage Sites" section of Dreamweaver (CS4/Mac). I've read the notices and see now that it's a bug that's never going to be fixed . . . and, of course, I didn't back up the .ste file 'cause I just didn't see it coming.
That said, I went to start redoing the sites and started by opening the "Files/Assets" window in DW . . . then ran into a strange problem.
All our web sites are stored in the "WEB SITES" folder in the "GRAPHICS" folder on our "BIG HARD DRIVE."
However, when I went to open up some pages in our stored sites, the "GRAPHICS" folder, in the Dreamweaver menu, doesn't show up as a Folder . . it's shows up as a 0k file. I can go to "file open" and navigate to the GRAPHICS folder, no problem . . .and all the files are there and open up. However, I can't access it through the manage sites part of the "files" window.
Is this making sense? I've attached a screen capture . . .
Any help would be greatly appreciated.
StuI'm pretty sure that they are all lost if you hadn't backed
up all sites
previously.....
it's all kept in the registry somewhere, but difficult to
retrieve I
believe.
You may find this tool very useful from now on -
Backup everything using the MM Exporter:
http://mm-exporter.joexx.de/
Nadia
Adobe� Community Expert : Dreamweaver
http://www.DreamweaverResources.com
- CSS Templates|Tutorials
http://www.csstemplates.com.au
http://www.perrelink.com.au
- Web Dev
http://www.adobe.com/devnet/dreamweaver/css.html
CSS Tutorials for Dreamweaver
"nosummers" <[email protected]> wrote in
message
news:e928cg$11b$[email protected]..
> Hi, I hope someone can help...
>
> A few days ago I could see all my defined sites listed.
> Now only 6 of about 16 are there.
> I have looked in... C:\Documents and
Settings\Richard\Application
> Data\Macromedia\Dreamweaver MX 2004\Configuration
> ...and they are all there as folders with corresponding
.dws files but as
> I
> didn't back them up before I do not have .ste files to
import back in.
>
> Does anyone know of a fix for this, please?
>
> If not is there a way I can extract the passwords from
the .dws files?
> -
Manage Sites - All my existing Sites have disappeared..?
I have recently recovered form a hard drive crash and set up a new home directory.
When I open the <Manage Sites> dialog box in Dreamweaver CS4 all of my existing sites have disappeared and the list is empty.'
If I track the path in Finder <username/library/Application Support/Adobe/Dreamweaver CS4/en-US/configuration.SiteCache> I can see that all of the sites are still listed in folders there.
Is there a way to redirect Dreamweaver to see these existing sites?
If not, can someone suggest the best way to recover from this/
ThanksCorrect - in order to keep those that are currently on the iPad they need to stay checked, and additional albums that you check will be added to those that are already on the iPad. Synced photos can't be deleted directly on the iPad, they can only be deleted by un-checking/de-selecting them on that tab.
-
System Crash - Manage Site?
My processor fried but fortunately no files were lost. I have
mounted the drive that held all the necessary data for the site I'm
working on in a temporary machine. I still have the folder
local_sites, that has all the various folders and html pages
intact. Do I need to use the "manage site" function and create a
"new site" in order to continue working on my project. (local_sites
prior to the crash was in my d: drive...after mounting the drive in
the temp computer it is ow located in the H: drive)
Help appreciated - David BirdOK, easiest is to recreate. What's the complicated answer?
I have a similar problem... but I really would like to
restore the information if it is available somewhere, because I
have many sites that will be hard for me to recreate, because they
have non-std setups and because of my poor memory of these sites I
touch once a year.
Where in the registry is the site definition stuff stored?
Can I restore it?
My situation is that our server was rebuilt with a new domain
and new domain users created, plus a windows "genuine" fix was made
on my PC, which didn't completely reinstall the OS, but it's more
like a repair, according to my IT guy. My old domain user documents
and settings were saved. Don't know if the registry was backed up
or if it's now too late!
Thanks!
-Cyn -
No WebApps in "Manage Site Features"
We have a standalone Sharepoint Foundation Server, Windows 2008, 64bit.
I have installed the Office Web Apps, everything was going fine, no error or such. Even the Products configuration wizzard gave me no errors.
After installing i saw in the "central administration", that the services where already started (in "manage services on the server"). Same at "manage service applications". Everything already was there for excel, word and powerpoint.
My problem is, i cant activate the features on my sites now, because on the "manage site features" i cant see any sign of the WebApps.
I can't open any of the files. In word, there is just a blank site with a header there, telling me in which path i am atm. In Excel i get the message: "An Error have occured. Please try again" I can see the ribbin above tho, but file wont open.
Any idea what i can to or what maybe the mistake is here?
NinaI get the following error:
Get-SPSite : A positional parameter cannot be found that accepts argument 'Enab
le-SPFeature'.
At line:1 char:35
+ $singleSiteCollection = Get-SPSite <<<< -Identity
http://zkemportal01 Enable
-SPFeature $webAppsFeatureId -Url $singleSiteCollection.URL
+ CategoryInfo : InvalidArgument: (:) [Get-SPSite], ParameterBind
ingException
+ FullyQualifiedErrorId : PositionalParameterNotFound,Microsoft.SharePoint
.PowerShell.SPCmdletGetSite
I switched <site_name> with our servername, but still there is something wrong. -
Site lookup columns empty on some subsites.
Hello all,
I have a lookup column that contains employee info from a list stored in the root of the site collection. I called it lkupEmployeeName
On one sub site that is one level down from the root, I have another list that contains projects. The lkupEmployeeName column is used to reference the employee name. This works fine.
I created another subsite one level down from the root and have a list there called equipment. Using the same lkupEmployeeName column there, the column is empty and I get a message stating that the service is not avail right now, click here to try again.
Of course clicking it results in nothing.
I added a new list item to the employee info table to see if the lkupEmployeeName column would update in the projects list and it does. Going to the equipment list in the site next door and it is still empty.
I have tried making another sub site and another lookup column. And for whatever reason any lookup columns I make now only work at the same level that they were created on. If I try to use the column on a different site they are empty.
Looking in SharePoint Manager, I have found the listID and webID attributes to be correct.
I have tried this with service pack one and without service pack one. (I have the machine duplicated in VMware) Either host has the same exact results.
My thoughts are that newly created sub sites are not connecting to the lists properly but I don't know why this is. The correct listID is showing in SharePoint Manager so I am stumped.
Ideas?
fr0stsp1reUpdate.
The above mentioned behavior happens if I use SharePoint designer to add site lookup columns to the list.
I just tried to add the site lookup columns by going to the list settings using the web interface and the lookup columns work fine. Apparently there is some sort of bug with the designer as I tried the same steps from another machine and it did the same
thing. There must be some sort of data missing that is not getting saved when I save the list through SharePoint Designer.
For now I will mark this thread as answered but I would still like to know the cause of this behavior if anyone else has any input.
fr0stsp1re
Maybe you are looking for
-
Question about multiple resource objects using the same OID target account
In Oracle Identity Manager 11g with OID connector as a target system. Is it possible to create multiple resources that use the same OID IT Resource. Each resource is responsible for provisioning certain OID attributes of the same OID account. For exa
-
any help on getting a free ipod touch 4th gen charger?
-
I can't open photos stored on my phone after upgrading to ios6
After upgrading to ios6 i have a problem in accessing my photos stored in my iphone!!!
-
Handle Idoc errors through workflow
How to handle inbound idoc errors through workflow and How to handle outbound idoc errors through workflow Thanks, Asha
-
I know this is a basic question but can anyone point me to a guide or tutorial that will help me setup a network between two macs. I have a AirPort Extreme able iBook G4 and Powerbook G4(my roommate and I) and we are wanting to be able to do three th