Managed Server can not connect to Database

I have a WebLogic cluster with three managed Server on 3 different machines.
ManagedServer_1, ManagedServer_2, ManagedServer_3 (on Machine 3)
Firstly, everything is ok. But when we changed some configuration on Firewall and make the WebLogic cluster could not connect to database. 3 servers change status from Running to Warning. Then, we undo all the changes to the Firewall configuration. 3 Servers could connect to Database again but still in warning state.
It is strange that when I tried to restart ManagedServer_3. That server could not be up normally. It went to Admin state and all the datasources and connection pool could not be created. I tried to restart the machine 3 and start the server but it still failed to make server running normally.
( I made the test connecting to Database from Machine 3, everything is okie, I can got data from database, port 1521 opened )
Has anyone got the same problem and how to fix it? Is that the problem with the admin server?

JDBC DataSources/Connection pools are all at Domain Level. All we do is just target the datasources to AdminServer and Entire cluster (this will take care of all managed servers in the cluster). From Weblogic Console, TEST the data sources for any firewall issues. If this works from console, check from where you are accessing the Console like within the Firewall, that can access the database server. Even though the actual application is deployed only on cluster, still I would recommend targetting the datasources to both AdminServer and Cluster.
Ravi Jegga

Similar Messages

Can not connect the database via query string (C#). The SQL Server Management Studio is showing the full path of a location instead of database name.

I can not connect to the database via C#. The database is showing full path of the database file instead of the database name. See the pic: a database showing only name 'emart' and the other database showing the full path.
: Robby

Hi,
According to your post, I know that the database name is showing file path of the database rather than the database name in SQL Server Management Studio. You were not able to
establish a connection to the database using C#.
As Olaf said, was any error message thrown out when the connection failed? How did you create these databases?
You can use the following T-SQL to attach the database and see if the issue persists.
CREATE DATABASE
databasename
ON (FILENAME = 'filepath _Data.mdf'),
(FILENAME = 'filepath_Log.ldf')
FOR ATTACH;
Thanks.
Tracy Cai
TechNet Community Support

New member of ora_dba group on server can not connect as sysdba.

We have added a new dba to our staff and have made him a member of the local group Ora_dba on the server (9i windows). He can not connect as sysdba but a long-time dba can.
SQL> connect / @s1 as sysdba
ORA-01031: insufficient privileges
I know this is a very old Oracle challenge so I am sure someone can give us some guidance!
Thanks

1) Examine the contents of the file located at:
$ORACLE_HOME/rdbms/lib/config.c
This file lists the operating-system groups that have administrative access, notably the one listed in the line containing "SS_DBA_GROUP". Is t
he UNIX account you are using to connect / as sysdba a member of this OS group?
2) Examine the contents of the file located at:
$ORACLE_HOME/network/admin/sqlnet.ora
Within this file, the line containing the string "SQLNET.AUTHENTICATION_SERVICES" should either be commented out, or be set to SQLNET.AUTHENTICATION_SERVICES = (BEQ,NONE)
3) Check the value of $ORACLE_SID for the UNIX account(s) connecting / as sysdba to ensure it is correct.

Urgent help!weblogic manage server can not start

exception is as below:
java.io.IOException: Permission denied
     at java.io.UnixFileSystem.createFileExclusively(Native Method)
     at java.io.File.createNewFile(File.java:883)
     at weblogic.nodemanager.server.LogFileRotationUtil.rotateServerFiles(LogFileRotationUtil.java:43)
     at weblogic.nodemanager.server.AbstractServerManager.startServer(AbstractServerManager.java:207)
     at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServerManager.java:185)
     at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23)
     at weblogic.nodemanager.server.Handler.handleStart(Handler.java:604)
     at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:121)
     at weblogic.nodemanager.server.Handler.run(Handler.java:71)
     at java.lang.Thread.run(Thread.java:662).
I don't know which folder's permission is wrong,I have changed the permission of the 'logs' folder to 777,but it still gets this exception, any idea when this exception occurs?

any friend can help? I am really confused with this.thanks

8.1.7 management server can't start

I tried to delete a DB service with oradim (W2K SP4, Oracle 8.1.7.0.0). Since then the management server can not start, with Windows error message Error 1075: The dependency service does not exist or has been marked for deletion. In services/properties/dependencies there are no dependency services anymore. Thanks for help.

Can you explain better what do you want to do ? please my friend
[email protected]
Joel P�rez

Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
    0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
   74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501   952   947   0 3:52PM ttys000    0:00.00 grep mysql
Please help!!

Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating.

Getting error "Can't connect to database DBMS is not supported in your current installation" in Demantra

Hi,
I have installed Microsoft Win x64(64-bit) Demantra 7.3.1.5 on Win 7(64-bit).
When I try to open Business Modeler or Demand Planner or Business Logic Engine from :
Start -> Oracle Demantra Spectrum , I am getting same error "Can't connect to database DBMS is not supported in your current installation"
Below is a screenshot of same.
I can connect to Collaborator Workbench though, but when I click on any of the "Planning Applications" from the menu in Collaborator Workbench window, again error is thrown.
Error is " Application could not be run! Error : undefined " as below :
I have installed Oracle DB Enterprise edition 11gR2(64-bit)
Please suggest where I am doing wrong.
Regards,
Vinni Sharma.

Hi Sharma,
Is this issue resolved? or still facing the same problem?
We need to setup connections details in ds.ini file under demantra_installation\Demand Planner\Security Management folder on the server side.
Regards,
Akshay

Oracle Enterprise Manager can't connect to database after installation

Hello, I have a problem with Enterprise Manager. I installed Oracle 10g and the patch 10.2.0.2. After install, I could connect to database from SqlPlus without problems, but when I try to connect from AllPrograms - Oracle - DatabaseControl or since the Web browser with http://servername:1158/em nothing happen. I reviewed the status of dbconsole with emctl status dbconsole but the status is running. I recreated the repository with emca -deconfig.......-repos drop and emca -config ...... -repos create , but nothing happened. I reviewed some threads in this forum, but I didn't find the solution. Finally I could connect from the browser but with http://localhost:1158/em. Do you help me how can I connect from Database Control, because the operators in Computer Center should monitor the instance since there, and when I want to connect since my own PC how can do it?
Thanks for your help and excuse my English, I am from Bogotá Colombia.
Sincerely Rubén

Hi,
Check the network connectivity between db server and pc from where u want to access em.
Check the listener service.
Check firewall settings, it should be off.
Regards,
Xaheer

Calc Manager Error "Could Not Connect To Dimension Server"

Could not connect to Dimension Server.
Please make sure that the required services are started.
https://ServerName:19443/HyperionPlanning/servlet/HspAppManagerServlet:
Connection refused: connect.
Hyperion Planning - 11.1.2.3
can anyone help me.
Thanks,

Hi ,
Please look at the support document from Oracle.
Calculation Manager Error "Could Not Connect To Dimension Server" (Doc ID 1634959.1)
Thanks,
~KKT~

Iphone 3 and 4 can not connect to server

We have been syncing e-mail to IPhone for 2 + years, Last night we stopped getting mail on our Iphones and other smart phones.
Using Exchange 2003 server.
Rebooted twice today - not seeing any sync errors in event log
Deleted my account, hard boot of IPhone and recreated account - still getting error “ can not connect to server” in mail
What is strange it is only mail – I can move an appointment and it updates my outlook calendar
Any suggestions much appreciated!

This resolve my problems
With that error noted, a search brought me to a solution:
http://alan.lamielle.net/2009/09/03/windows-7-nonpaged-pool-srv-error-2017
Set the following registry key to ’1′:
HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\LargeSystemCache
and set the following registry key to ’3′:
HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters\Size
Explanation of what the reg keys do: http://www.decuslib.com/decus/vmslt99a/nt/tips.txt (scroll to bottom)
Thanks to Alan LaMielle and Mark Russinovich.

Essbase Administration Services "Can not Connect to Administration Server"

Hi
Here I am installed Oracle EPM 11.1.2.2 Essbase,Planning and Reporting and after sucessfull configuration. When I tried to open Essbase Administration Console and there is no option to open administration console and I opened the Hyperion extraction setup folder and I installed Essbase Administration Console setup manuallay and after sucessful installation I try to Open and when I create new server and ir=ts created and then I am trying to connect server its throw this error
Error: Can not Connect to Administration Server
Please give me possitive things.
Thanks in advance..

Did you deploy the web applications to one managed server in the configurator, if you did then EAS is probably running on port 9000 so you would need to enter the server in the EAS console as servername:9000
Cheers
John
http://john-goodwin.blogspot.com/

Can not connect to oracle10g release2 database On XP SP2. Help needed

Hi! friends!
I have used Oracle 8 and it was nice. I didn't run Oracle 9i.
Now I installed Oracle10g R2 in WinXP-SP2. There was no problem in installation. But i can't run it. I get the Black SQL screen. But if i give some command it says "Not connected to database".
Oracle 8 version had built in database "emp" and "sal". In start up username and password box used to come(scott/tiger). But here I don't know if there is any builtin database,even there is no place to input username/password. So i cant work with 10g.
So i can't give command like Oracle 8
select *
from emp;
I do not have any network in my Desktop PC.. pls help me how to run and test Oracle 10g database on my machine. Also tell the name of the built in database.
I am much in trouble.
I am wishing thanks in advance to all who will reply.
Regards
Abir Atarthy
[email protected]

In 10g database
During installation is you choose "database creation" option then default database is created.
database name is "ORCL"
you can check in windows registry
On command prompt
cmd>net start
if it is showing "OracleServiceORCL" then database is created"scott/tiger user is also created but in 10g it is LOCKED by default.
so you have to first unlock this user.
Now you can connect with "sys"or "system" but you know their password.
in 10g there is no default password for sys or system, we have to mention during installation time.
if you don't know then you can connect with sys like "SQL> CONN / AS SYSDBA" to sqlplus.

Adobe cloud application manager - can not connect to internet

To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct - Sydney Australia
Question:
1. Is anybody else having this problem
2. How do we fix
I already changed the time zone east coast US - did not change anything
Could it be a corrupt program - thus requiring to reinstall program Application manager
I am using Windows 7.
It has been like it for ten days - It asks to log in everytime I turn computer on
All programs in Creative Cloud work
Any suggestions and solution
Online help and phone help had no solutions other than what I suggested - that is reload application manager
Thanks for help
Ian Cleland

The Creative Cloud File Synching was just offline, should be online now again.
See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
Maybe that was your problem.

I am trying to turn on iCloud, I get a message "can not connect to server". How do I connect to server?

I can't get iCloud to turn on. When I try to start it I gat a message "can not connect to server". How do I start the cloud?

So what model and year is your machine?
Here are the requirements for ML:
http://www.apple.com/osx/specs/

HT201263 the itunes tales me that can not connect to update server, i tried to connect my i pad ever ting is ok to the ipad but my iphone stop working after update and i tried all solutu=ion suggested on the internet please i need help

after i update the iphone 4s to ios 6.1.1 my i phone stop responding and a message appear tell to connect to i tune i did all the solution and put my iphone in dfu mode and nothing happen my i phone is gone no solution and a message appear tells that can not connect to update server but my ipad work at the same pc the problem in the i phone, plz some help

Was thje TM backup 10.6 also?
I never use TM for Backups, far better less painful backup methods, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imagine something not being covered there.

Managed Server can not connect to Database

Similar Messages

Maybe you are looking for