New member of ora_dba group on server can not connect as sysdba.

We have added a new dba to our staff and have made him a member of the local group Ora_dba on the server (9i windows). He can not connect as sysdba but a long-time dba can.
SQL> connect / @s1 as sysdba
ORA-01031: insufficient privileges
I know this is a very old Oracle challenge so I am sure someone can give us some guidance!
Thanks

1) Examine the contents of the file located at:
$ORACLE_HOME/rdbms/lib/config.c
This file lists the operating-system groups that have administrative access, notably the one listed in the line containing "SS_DBA_GROUP". Is t
he UNIX account you are using to connect / as sysdba a member of this OS group?
2) Examine the contents of the file located at:
$ORACLE_HOME/network/admin/sqlnet.ora
Within this file, the line containing the string "SQLNET.AUTHENTICATION_SERVICES" should either be commented out, or be set to SQLNET.AUTHENTICATION_SERVICES = (BEQ,NONE)
3) Check the value of $ORACLE_SID for the UNIX account(s) connecting / as sysdba to ensure it is correct.

Similar Messages

Managed Server can not connect to Database

I have a WebLogic cluster with three managed Server on 3 different machines.
ManagedServer_1, ManagedServer_2, ManagedServer_3 (on Machine 3)
Firstly, everything is ok. But when we changed some configuration on Firewall and make the WebLogic cluster could not connect to database. 3 servers change status from Running to Warning. Then, we undo all the changes to the Firewall configuration. 3 Servers could connect to Database again but still in warning state.
It is strange that when I tried to restart ManagedServer_3. That server could not be up normally. It went to Admin state and all the datasources and connection pool could not be created. I tried to restart the machine 3 and start the server but it still failed to make server running normally.
( I made the test connecting to Database from Machine 3, everything is okie, I can got data from database, port 1521 opened )
Has anyone got the same problem and how to fix it? Is that the problem with the admin server?

JDBC DataSources/Connection pools are all at Domain Level. All we do is just target the datasources to AdminServer and Entire cluster (this will take care of all managed servers in the cluster). From Weblogic Console, TEST the data sources for any firewall issues. If this works from console, check from where you are accessing the Console like within the Firewall, that can access the database server. Even though the actual application is deployed only on cluster, still I would recommend targetting the datasources to both AdminServer and Cluster.
Ravi Jegga

I HAVE THE NEW VERSION OF FIREFOX. I LOVE TO PLAY THE POGO GAMES , I CAN NOT CONNECT TO SERVER. A MESSAGE WOULD APPEAR SAYING LOST CONNECTION. WHAT IS THE PROBLEM?

I CAN GET INTO THE POGO WEB SITE, BUT CAN NOT LOAD THE GAMES. THE GAME WILL CLOSE AND A MESSAGE WILL APPEAR CAN NOT CONNECT TO SERVER. IT GIVE YOU OTHER OPTIONS, COULD BE BEHIND PROXY OR FIREWALL., MAY BE TO BUSY, PLEASE TRY AGAIN. NONE OF THEM SEEM TO BE THE PROBLEM.HELPPPPPPPPPPPPP

Which "new version"? Websites think you are using Firefox 3.0.19, which is no longer supported. Maybe your User Agent is "stuck" on that old version?
http://en.wikipedia.org/wiki/User_Agent
type '''about:config''' in the URL bar and hit Enter <br />
''If you see the warning, you can confirm that you want to access that page.'' <br />
Filter = '''general.useragent.''' <br />
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. <br />
Then restart Firefox

HT4864 I just updated my iphone to the new version and it won't let me connect to ICloud- it says can not connect to server. HELP!

I just updated my iphone to the new version. I keep getting a msg stating ICloud can not connect to server. I have turned off the phone several time- no luck. Help!!

You are very welcome! I'm glad it worked for you!

Just got a new router and now my ipad 1 says it can not connect to the server, even though it says that it is connected to wi fi

Just put in a new router and now my ipad 1 will not connect to the server. It is connected to the wifi though. Does this mean my ipad is too old? Any suggestions on what to do?

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the "i" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

I just tried updating my iPhone 5 to the new iOS7 and it keeps saying the activation server can not be reached...My phone has been down for almost an hour now. Can anyone help? thank you

I just tried updating my iPhone 5 to the new iOS7 and it keeps saying the activation server can not be reached...My phone has been down for almost an hour now. Can anyone help? thank you

Too many people are flooding Apple's servers, everyone is having this issue, try every so often, or wait until tomorrow.

BPEL Server can not start after jazn default realm has been modified

Hi, everyone:
In order to customize my user task assigneeGroup, I set up a new realm in the jazn-data.xml using the shell (java -jar jazn.jar -shell). I tried to modify the jazn.xml file in %OraBPELPM%\integration\orabpel\system\appserver\oc4j\j2ee\home\config, and set the default-realm attribute to my new realm.
After these modification, the BPEL Server can not start, the server seems to stop after loading the first two EJB.
Does anyone ever encounter this problem? Could anyone help me?

It appears that I had the wrong oracle home and as a result some of the steps were skipped by the Universal Installer during installation, but installation was still claimed as successful. Even by launching the 'Mobile Server Repository Wizard' manually by running 'repwizard.bat' did not provide all the necessary window boxes to provide the details such as the SID, hostname, port number. I re-installed.
After starting the back-end database and then starting mobile server and testing in IE to see if the server was working by typing in http://<host name>:80/webtogo, I got the screen displaying mobile server.
Many thanks for your help.
Mark

IPos Update Server Can not be contacted

I have a vintage iPod Mini that I am attempting to Restore on a iMac PPC in iTunes 9. When I select the Restore button in iTunes, a dialog box appears stating that the iPod Update Server can not be contacted. Resolutions from the iTunes Help relate only to Windows based Operating Systems. regarding Macs; it states that I should check my internet settings to make sure I can contact an Apple site and clearly as you can see, I can create a discussion topic.
Can anyone offer a resolution to this problem

In 7 months there was no response from the Discussion Group. Per BD Aqua, iTunes Store is not compatible with OSX 10.4

IPod Software Update Server can not be contacted

I have a vintage iPod Mini that I am attempting to Restore on a iMac PPC with iTunes 9. When I select the Restore button in iTunes, a dialog box appears stating that the iPod Update Server can not be contacted. Resolutions from the iTunes Help relate only to Windows based Operating Systems. Other discussions all relate to Windows Regarding Macs; it states that I should check my internet settings to make sure I can contact an Apple site and clearly as you can see, I can create a discussion topic, so it is not the internet.
Can anyone offer a resolution to this problem

No response by Discussion Group. BD Aqua states iTunes Store is not compatible with OS X 10.4

Can not connect to Cerberus FTP Server with PASV

I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
Response:          220-220-Welcome to Cerberus FTP Server
Response:          220 220 Created by Cerberus, LLC
Command:          USER test
Response:          331 User test, password please
Command:          PASS ***********
Response:          230 Password Ok, User logged in
Command:          CLNT FileZilla
Response:          200 Command okay
Command:          OPTS UTF8 ON
Response:          220 UTF8 support on
Command:          PBSZ 0
Response:          200 PBSZ=0
Command:          PROT P
Response:          200 PROT P OK, data channel will be secured
Status:          Connected
Status:          Retrieving directory listing...
Command:          PWD
Response:          257 "/" is the current directory
Command:          TYPE I
Response:          200 Type Binary
Command:          PASV
Response:          227 Entering Passive Mode (external IP,195,83)
Command:          MLSD
Error:          Connection timed out
Error:          Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.

Dan,
Looking at the output,
Status:          Resolving address of domain.com
Status:          Connecting to ExternalIP:990...
Status:          Connection established, initializing TLS...
Status:          Verifying certificate...
Status:          TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike

Apple Tv is telling me it can not connect to the server. How do I fix that?

I changed my apple id and after I did, now my apple tv says it can not connect to the server when I try to view my purchases. Hulu and netflix work so the internet is working fine. My phone and ipad also work fine with the new id. Does anyone know how to make my apple tv purchases come back?

Power cycle the router and the ATV.
If the issue continues on the ATV go to Settings > General > Reset

HT1688 Activation server can not be reached while updating my iPhone software.

Why is my phone not activating the new 7 software on an iphone 4s.
Here is part of the message I have beengetting...
Activation server can not be reached while updating my iPhone software.

Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to a known-good Wi-Fi network if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
http://support.apple.com/kb/ts3424

OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.

hi ALL
OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.
Exchange environment contains 2 Exchange Mailboxesserver ,( one Failed , virtual Machine)
2 cas Servers
first databases could not be mounted but after we run the below command , users can use OWA but outlook could not connect
Start-DatabaseAvailabilityGroup -Identity DAG -MailboxServer MBX1
please support
thanks

Hi,
According to your description, I understand that Outlook client cannot connect to Exchange server 2013 while one member of DAG failed.
If I have misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account store in MBX1 experience this issue, users in MBX2 works fine.
Please run following command to double check the database status:
Get-MailboxDatabase –Status | select Name,Mounted,MountedOnServer
If it works in OWA, the issue may be related to Outlook side. Please run “Test E-mail AutoConfiguration” and “Outlook Connection Status” to get more details, expecial the setting of proxy server, it’s more helpful
for further troubleshooting.
Additional, please try to recreate a profile for testing. Besides, please move active DB back to MBX1.
Best Regards,
Allen Wang

The X-Server can not be started on display :0.. see /var/dt/Xerrors

The X-Server can not be started on display :0..
see /var/dt/Xerrors
I am trying to launch the CDE from the console and have tried the running the command : svcadm enable cde-login
but still get the same error. After some investigation i have found some advice regarding the font path and fonts.dir but its well confusing !!!
Can someone explain to me an easy way to display the cde?
I have looked in /var/dt/Xerrors and the output is:
Solaris ABI: 32-bit
SUNWxorg-server package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-server patches applied: 125720-20
SUNWxorg-graphics-ddx package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-graphics-ddx patches applied: 125720-20
SUNWxorg-mesa package version: 6.8.2.5.10.0113,REV=0.2005.08.02
SUNWxorg-mesa patches applied: 125720-20 125724-01
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 3 15:00:55 2008
(EE) Unable to locate/open config file
New driver is "ati"
(==) Using default built-in configuration (57 lines)
(EE) Failed to load module "dri" (module does not exist, 0)
(II) Module "ddc" already built-in
(II) Module "ramdac" already built-in
(II) Module "i2c" already built-in
(EE) AIGLX: DRI module not loaded
The XKEYBOARD keymap compiler (xkbcomp) reports:
Error: Mode_switch added to symbol map for multiple modifiers
Using Mod2, ignoring Mod3.
Warning: Symbol map for key <KPEQ> redefined
Using last definition for conflicting fieldsErrors from xkbcomp are not fatal to the X server
Fatal server error:
could not open default font 'fixed'
hes applied: 125720-20
SUNWxorg-graphics-ddx package version: 6.8.0.5.10.7400,REV=0.2004.12.15
SUNWxorg-graphics-ddx patches applied: 125720-20
SUNWxorg-mesa package version: 6.8.2.5.10.0113,REV=0.2005.08.02
SUNWxorg-mesa patches applied: 125720-20 125724-01
Before reporting problems, check http://sunsolve.sun.com/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 3 14:21:13 2008
(EE) Unable to locate/open config file
New driver is "ati"
(==) Using default built-in configuration (57 lines)
I have tried running kdmconfig and am worried about running a sysunconfig as this could unconfigure my server it Solaris 10 on x86!

I had the same problem when I upgraded to snv_114 from snv_98
on SPARC. The important line in /var/dt/Xerrors is this one:
could not open default font 'fixed'
The problem (in my case, anyway) was that the fonts.dir files were
not updated during the install/upgrade process. This fixed it:
$ su -
# cd /usr/X11/lib/X11/fonts
# for f in *; do cd $f; mkfontdir; cd -; done

GL can not connect to server

OS 10.6.8, GoLive CS2 v 8.0.1
For my web creation I use Adobe GoLive. I seldom use it.
I need to upload a new page but when trying to connect I get the following message:
Cannot connect to server: ftp://www.davidgraphics.com/public_html/
Reason: Can not connect to FTP. (530: Login incorrect.)
I have no idea what might have been changed since I last uploaded anything. Can anyone help me get past this error?
Regarding GL. Is there a way to override the existing Publish Server settings and create new ones?
Cheers
David Heidelberger
[personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
[If you are posting using email, please turn your 'sig file' function OFF for posting]

I restarted and it fixed the problem.

New member of ora_dba group on server can not connect as sysdba.

Similar Messages

Maybe you are looking for