Manager could not see employee's data on MSS

Hello Experts,
One the Manager could not see employee's data on MSS (in iview). Only employee names appearing but not the other details.
We have checked and debugged, the data is populating in the backend but on portal its only displaying employee names.
We have checked the configuration, roles and it is also looking fine. Not sure why it is not displaying data on portal.
Please help. Thank you.
Regards
Saurabh

First off I want to thank you Siddharth for all your responses.  Ultimately, your responses helped me get on the right path for  resolving this issue. 
I ended up taking this into debug and finding out specifically why these absences did not appear on the team calendar.  I'd like to begin by indicating, in my opinion, this is a bug/programming flaw.
Within IF_EX_PT_ABS_REQ~AUTH_CHECK_AND_ANONYMIZE_DATA there was a check to determine if the rule group had the IT2001/2002 Authorization Check section, Employees: Deactivate Authorization Check and Managers: Deactivate Authorization Check boxes checked.  For 1 out of the 3 rule groups configured, one group did not have those boxes checked, while the other two did. 
What happened, is when the program built it's list of PERNA's that report directly to this manager, the first person in the list happened to be in the rule group that did not have the Deactivate Authorization boxes checked.  However, the remaining PERNA's in the list were in another rule group that did have the Deactivate Authorization boxes checked.  Based on my interpretation, the team calendar should have ommitted the absences of the one person, but should have displayed the absences for everyone else in the separate rule group. The code only reads what rule group the first PERNA in the list is and applies that MSS_NO_AUTHCHECK value to all the other PERNA's in the list.
Either the code should do a MSS_NO_AUTHCHECK lookup on every PERNA on the list or should check what rule group the approver/manager is in and apply it to all his employees.
Game - Set - Match.......

Similar Messages

  • Could not see the data in the cube

    Hi all,
    Iam trying to load data from one cube to another. Everything is fine but Iam not able to see the data in the new cube.
    I created 2 cubes--> Cube A new & cube B new which are copied from existing cubes cube A and Cube B. I need to load data from these new cubes cube Anew & cube B new to another cube (cube C new)  which is also a copy of existing cube C. I created update rules and activated them.I tried to load the data into the cube C new. I can see the load to be green but I cannot see the data in the cube C new. it shows 0 records in cube C new. there are records in cube A new & cube B new.
    Can anyone plz help me out.
    Thanks in advance.
    Thanks,
    Preethi.

    Hi Balu,
    I dont know what exactly the problem was but even after the load was successful i could not see any records in the new cube. The source cubes had 60,446 and 7595 records. but the target cube had 0 records.
    I ran the program SAP_FACTVIEWS_RECREATE as Bhanu suggested and deleted the data from the new cube(inspite of having 0 records I deleted them). I tried to load the data again which was successful and I could see the data in the new cube.
    Hope its clear.
    Thanks,
    Preethi.

  • Hierarchies Job Failing  The job process could not communicate with the dat

    Hi Experts,
    We have a group of hierarchies that run as a separate job on the DS schedules. The problem is this when we schedule the job to run during the production loads it fails but when we run immediately after it fails it runs completely fine. So it basically means that if i run it manually it runs but when its scheduled to run with the production job it fails. Now the interesting thing is If i schedule the job to run anytime after or before the production jobs are done. It works fine.
    The error i get is
    The job process could not communicate with the data flow <XXXXXX> process. For details, see previously logged
                                                               error <50406>.
    Now this XXXXX DF has only Horizontal Flatenning and it does not run as separate process because if i have it has separate process it fails with an EOF . So i removed the run as separate process and changes the DF to use in memory .
    Any Suggestion on this problem...

    Thanks Mike.. I was hoping its a memory issue but the thing i don't understand is when the job is scheduled to run with the production job it fails. when i manually run the job during the production job it runs, this kinda baffles me.
    DS 3.2 (Verison 12.2.0.0)
    OS: GNU/LINUX
    DF Cache Setting :- In Memory
    processor       : 0
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 26
    model name      : Intel(R) Xeon(R) CPU           X5670  @ 2.93GHz
    stepping        : 4
    cpu MHz         : 2933.437
    cache size      : 12288 KB
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 11
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
    bogomips        : 5866.87
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 40 bits physical, 48 bits virtual
    power management: [8]
    processor       : 1
    vendor_id       : GenuineIntel
    cpu family      : 6
    model           : 26
    model name      : Intel(R) Xeon(R) CPU           X5670  @ 2.93GHz
    stepping        : 4
    cpu MHz         : 2933.437
    cache size      : 12288 KB
    fpu             : yes
    fpu_exception   : yes
    cpuid level     : 11
    wp              : yes
    flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss syscall nx rdtscp lm constant_tsc ida nonstop_tsc arat pni ssse3 cx16 sse4_1 sse4_2 popcnt lahf_lm
    bogomips        : 5866.87
    clflush size    : 64
    cache_alignment : 64
    address sizes   : 40 bits physical, 48 bits virtual
    power management: [8]
    Thanks for your help

  • Lock in lock manager could not be set - long text

    Hi Experts,
    We have a issue with the 124002 ID request for the ODS ZSDOD005 (request number REQU_6ROBVFEQ9SSOIJY5MDF2W9BTX).
    It has green status, but if you open the monitor, the status is red.
    If you search for more detail,  you can see the following message:
    “Lock in lock manager could not be set -> long text”
    The error refers to a lock in lock manager
    Lock in lock manager could not be set -> long text
    Message no. RSENQ009
    Diagnosis
    The lock in the lock manager could not be set.
    An attempt is being made to set the lock in include LRSENQF00 in the form set_enqueue.
    The lock table is table RSENQ_PROT_ENQ.
    An attempt was made to lock the following object:
    User/Object  = BWREMOTE/ZSDOD005
    Object_typ/Action = ODS/UPD_ODS
    Subobject  = REQU_6ROBVFEQ9SSOIJY5MDF2W9BTX
    SubSubObject = 000001
    This problem affects subsequent loads.
    The InfoPackage ZPAK_6K641H103XV0MTRBAV9Q788IS loads data to three ODS ZSDOD001, ZSDOD003 and ZSDOD005.
    None of the other ODS generated InfoPackage for 09.25.2013.
    Our BASIS support team couldn’t see locks that impact in the procedure.
    The InfoPackage ZPAK_6K641H103XV0MTRBAV9Q788IS is part of the Process Chain ZCP01 - Ventas (SD) Transaccional
    If we tried to repeat the step we had obtained the following message:
    02.10.2013 16:44:04 Job started
    02.10.2013 16:44:04 Step 001 started (program RSPROCESS, variant &0000000032648, user ID BWREMOTE)
    02.10.2013 16:44:04 Start process LOADING ZPAK_6K641H103XV0MTRBAV9Q788IS in run 7PZGWSRZS6GJGB093B9W72U5H of chain ZCP01
    02.10.2013 16:44:04 Delta request REQU_6ROBVFEQ9SSOIJY5MDF2W9BTX is incorrect in the monitor
    02.10.2013 16:44:04 A repeat needs to be requested
    02.10.2013 16:44:04 Data target ZSDOD005 still includes delta request REQU_6ROBVFEQ9SSOIJY5MDF2W9BTX
    02.10.2013 16:44:04 If the repeat is now loaded, then after the load
    02.10.2013 16:44:04 there could be duplicate data in the data targets
    02.10.2013 16:44:04 Request the repeat?
    02.10.2013 16:44:04 Last delta incorrect. A repeat must be requested. This is not possible.
    02.10.2013 16:44:05 Performing check and potential update for status control table
    02.10.2013 16:44:05 Could not set request REQU_6ROBVFEQ9SSOIJY5MDF2W9BTX in DTA ZSDOD005 to red; terminated with error 5
    02.10.2013 16:44:05 Job finished
    This issue prevents subsequent loads of data.
    It is abnormal that there is a green external status and a red one internal.
    Could you, please check why are we having this lock error?
    What are the steps to follow to avoid losing information or having it duplicated in this case?
    Thanks,
    Kiran

    Hi,
    Make sure the DSO is not changed mode when u r trying perform your activity in production system.
    if the DSO is in change mode..it will be locked for further activities to be happend on it unless again it comes back to active status.
    if it locked..you can see all the locked Objects in SM12 Tcode and proceed accordingly.
    hope this is clear for you.
    Regards
    Ramsunder.

  • Error 25109 : The install program could not create the config data store. Is this a know issue with a solution?

    Hi I cant install the Management Console.
    I keep getting
    Error 25109 : The installation program could not create the configuration data store. Please see the installation log for more info.
    Has someone come across this problem before?
    I am using
    MS Server 2008 Std x86
    SQL Server 2005 SP2 Std x86
    MDOP 2008 R2
    APP-V 4.5
    Please can someone help.
    Thanks

    I'm running into the same problem myself, I have an almost identical setup.
    Trying to do a clean install of App-V Management Server 4.5 from the MDOP 2008 R2 CD.
    Server OS: Windows Server 2008 Enterprise SP1 (Has WDS and IIS installed (IIS 6 Management Compatibility too), as well as .Net 3.5 SP1 Framework)
    Database: Microsoft SQL Server 2005 Enterprise (Version 9.00.3068.00) (Note: SQL server is running on a different server than the server App-V is being installed on.)
    Installer gets to the point where it starts creating the database than dies, reporting a 25109 error.
    Checked out the logfile the installer created, here's a snip of the last few lines before is starts rolling back the install:
    1
    [2008-12-23 15:58:35] (2284:3084) SQL state: ``01000'', Native: 0, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]<<< CREATED TRIGGER dbo.TR_U_SYSTEM_OPTIONS >>>''. 
    2
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``42000'', Native: 18058, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]Failed to load format string for error 16873, language id 1033.  Operating system error: 122(The data area passed to a system call is too small.). Check that sqlevn70.rll is installed in C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\Resources\1033, where 1033 is the language ID of US English, or the appropriate folder for the locale in use. Also check memory usage.''. 
    3
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``01000'', Native: 3621, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.''. 
    4
    [2008-12-23 15:58:36] (2284:3084) ::SQLExecDirectW error 0xffffffff. 
    5
    [2008-12-23 15:58:36] (2284:3084) Failed to execute SQL ``/* ------------------------------------------------------------------------- *\ 
    6
        Copyright (c) Microsoft Corporation.  All rights reserved. 
    7
    8
        Description: 
    9
            This script creates all user-defined messages. 
    10
    11
            The types of messages allowed (and their severities) are: 
    12
            FATAL   - SQL Server Severity = 17; ours = 1 
    13
            ERROR   - SQL Server Severity = 16; ours = 2 
    14
            WARNING - SQL Server Severity = N/A; ours = 3 
    Can anyone help me shed some light on what's going on here?

  • Inline item mx:Image ... in mx:itemRenderer could not see the defination of method

    I have following code and got a compilation error ("possiblely called an undefined function") because the <mx:Image ...> in the <mx:itemRenderer > could not see the defination of "aMethod" method:
    <mx:Form ....>
    <mx:Script><![CDATA[
    private function aMethod(evt:Event):void {
               // code...
    ]]></mx:Script>
    <mx:Canvas label="Tile View" width="100%" height="100%" >
              <mx:TileList id="photosTileList" dataProvider="{this.photoDP}" width="100%" height="100%"  >
                        <mx:itemRenderer >
                            <mx:Component>
                                <mx:Image horizontalAlign="center" source="{data.url.text()}"
                                    toolTip="{data.caption.text()}" width="55" height="38" complete="aMethod(event)"/>  <!-- It causes the error -->
                            </mx:Component>
                        </mx:itemRenderer>
             </mx:TileList>
             <mx:Image .... complete="aMethod(event)"/>  <!-- It is OK here -->
    </mx:Canvas>
    </mx:Form>
    I do not know why the inline <mx:Image> inside <mx:itemRenderer> can not see the "aMethod" function defination in the same mxml file.
    Any suggestions?

    You need outerDocument, and the method cannot be private, it should be public:
    complete="outerDocument.aMethod(event)"
    If this post answers your question or helps, please mark it as such.
    Greg Lafrance - Flex 2 and 3 ACE certified
    www.ChikaraDev.com
    Flex / AIR Development, Training, and Support Services

  • Recovery Manager could not restore your computer.

    HP G32-301tx Notebook PC LK435PA
    windows 7 64-bit
    Recovery Manager could not restore your computer.

    Hi:
    You will either need to see if you can get a set of recovery disks for your PC by reading the info at the link below, or make your own W7 DVD.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&tmp_task=solveCategory&cc=us&dlc=en&lan...
    Here's how:
    If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
    Burn the ISO using the Burn as ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
    Use the 25 character product key on the PC to activate the installation.
    The key will activate either a 32 or 64 bit installation.
    Then go to the PC's support and driver page to install the drivers you need.
    Link to the W7 ISO file downloads is below.
    http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
    Paul

  • Could not find version number data in TF_BUILD_BUILDNUMBER

    Hi,
    I'm using the default build process template TfvcTemplate.12.xaml that came with TFS2013. I'm trying to call ApplyVersionToAssemblies.ps1 (from the Community TFS Build Extensions) in the pre-build script to version
    assemblies. In lieu, I got this error below.
    ApplyVersionToAssemblies.ps1 : Could not find version number data in TF_BUILD_BUILDNUMBER.
    + CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorExcep
    tion
    + FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorExceptio
    n,ApplyVersionToAssemblies.ps1
    I've read that
    TF_BUILD environment variables are automatically created, but I do not see them in the build machine. Do I need to manually create those variables?
    TDN

    Thank you so much EvgeniyBaryShev VI! I was able to see the available TF_BUILD environment variables. The PowerShell script was looking for a 0.0.0.0 pattern in the build number stores in TF_BUILD_BUILDNUMBER. Once I changed the build number format,
    I was able to version my assemblies. Thanks again for the pointer!
    TDN
    Hi,
    I am getting the same error of TF_BUILD_BUILDNUMBER.
    Can you please help me out regarding the changes carried out by you in details.
    Thank you.

  • How do I fix Error Message = Out Of Memory Could Not Install or Delete Data"

    I have looked all over the internet and there is a lot of discussion about WHY this happens and a lot of discusion about what to do in the future to avoid this from happening.
    I need help with specific steps on how to delete the static image that is stuck on my desktop. The image is large and covers most of my screen. I have shut down, unplugged, let the machine rest....started up several times. Not working.
    The error reads "OUT OF MEMORY - COULD NOT INSERT OR DELETE DATA"
    Thanks!

    Probably you are running out of disk space. Can you interact with your Mac at all, or is the error  message preventing you from using Finder windows?
    I'd try to boot into Save Mode: This will only load a rudimentary version of Max OS X, needing less space, and will clean some caches. The Start Up will tale longer, however.
    When in Save Mode try to empty the Trash and to free as much disk space as you can, by deleting files.
    How much free disk space do you have right now?
    See:
    http://www.wikihow.com/Start-Your-Mac-in-Safe-Mode
    If you cannot access the FInder to free disk space, even in Save Boot Mode, post back.
    Regards
    Léonie

  • Could not retrieve server initialization data

    This is in regard to recent issue reported under MS Project 2010 Proffesional edition. We were trying to connect MS Project 2010 Proffesional Client edition to MS Project 2010 server so that we can upload the project to resource center directly.
    Right information is added under info-> Accounts and post to that MS Project client reports the following error "Could not retrieve server initialization data". Please let me know how to get rid of this.
    Quick help is required!!
    Thanks
    Yash Bindlish

    - Confirm you created your Project Server account within the Project Client? This is done from the backstage by clicking File > Info tab. If you haven't completed
    this step, you cannot connect to Project Server.
    - Confirm when you open Project Professional 2010, did you register the account?
    To register the account
    FILE   >>> INFO 
    >>> "Manage Accounts"
    Also, make sure all the accounts do not have a default account. 
    This is to make sure the default "Computer" account is not being used.
    Also you can try with
     “Disable the loopback check”
    http://support.microsoft.com/default.aspx/kb/896861?p=1
    Thanks

  • Could not see oracle database homepage in oracle 10g version

    hi ,
    i am trying to open database home page option of oracle 10g software, but could not do it.
    i have started the services ORACLEXETNS listener,oracle service XE, and could not see the database home page.
    i am new to oracle 10g,
    i am getting the error 'page cannot be displayed' .
    could some one help me regarding this.

    Are you taking about enterprise manager .Type a correct address in address bar to run web base enterprise manager.you can check whether enterprise manager is running or not by using command >emctl status dbconsole .Or you have some other issue.please write if there is any error.
    Regards

  • Could not see more than 1 complex type

    Hi ,
    I am trying to save data entered in a datagrid by a
    webservice call .
    I need to send the data (in the dta grid) as a request to the
    webservice ,
    I will explain how my request object (requestObj) will be(at
    the time of sending the request)--
    there are three complex levels of data(in xml format)---
    first level has the "objA" which is a collection of
    "objB"(objects)
    "objB" - inturn is a collection of "values".
    I have all this data (objA-objB-values) in the requestObj
    (finally) , I need to send this requestObj as a request to the
    webservice.
    The problem is I am not able to find if I am able tosend the
    data properly in the requestObj .
    Wen I try to check in the debug mode (Flex Builder 3) I could
    not see more than 1 complex level that is Iam able to just see the
    data in the objA (I need to know if I am able to send the data
    properly in the request ).
    The data in the objB and values appear to be null (But when I
    see the dataProvider of the dtagrid I can see all the data)
    2.I even tried to "trace()" the data but as all the data is
    in objects I am not able to view the data.
    I am trying to resolve this from quite a long time.
    Can any one help me out
    thanks
    Nash

    "nash99" <[email protected]> wrote in
    message
    news:g8a9au$4pd$[email protected]..
    > Hi ,
    > I am trying to save data entered in a datagrid by a
    webservice call .
    > I need to send the data (in the dta grid) as a request
    to the webservice ,
    > I will explain how my request object (requestObj) will
    be(at the time of
    > sending the request)--
    > there are three complex levels of data(in xml format)---
    > first level has the "objA" which is a collection of
    "objB"(objects)
    > "objB" - inturn is a collection of "values".
    > I have all this data (objA-objB-values) in the
    requestObj (finally) , I
    > need
    > to send this requestObj as a request to the webservice.
    >
    > The problem is I am not able to find if I am able tosend
    the data properly
    > in
    > the requestObj .
    > Wen I try to check in the debug mode (Flex Builder 3) I
    could not see more
    > than 1 complex level that is Iam able to just see the
    data in the objA (I
    > need
    > to know if I am able to send the data properly in the
    request ).
    > The data in the objB and values appear to be null (But
    when I see the
    > dataProvider of the dtagrid I can see all the data)
    >
    > 2.I even tried to "trace()" the data but as all the data
    is in objects I
    > am
    > not able to view the data.
    >
    > I am trying to resolve this from quite a long time.
    > Can any one help me out
    try trace(thedata.toXMLString())
    HTH;
    Amy

  • ReleaseRequest failed with error code 0x80004005 \ Task Sequence Manager could not release active TS request. code 80004005

    Hi All,
    I am trying to deploy an OS but the deployment is failing part way through. I have searched the logs and identified the error: Task Sequence Manager could not release active TS request. code 80004005
    If anyone could assist with this is would be much appreciated.
    Many thanks
    Logs below:
    <![LOG[Unlocked ActualConfig successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7898">
    <![LOG[Unlocked policy transaction lock successfully]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="policyutil.cpp:7904">
    <![LOG[Raising event:
    instance of CCM_PolicyAgent_SettingsEvaluationComplete
    ClientID = "GUID:8388E2E2-7642-4436-88D0-FC9335F6D56E";
    DateTime = "20141218122103.273000+000";
    PolicyNamespace = "\\\\wst0339\\root\\ccm\\policy\\machine\\actualconfig";
    ProcessID = 1748;
    ThreadID = 1752;
    ]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="event.cpp:729">
    <![LOG[Successfully submitted event to the Status Agent.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="event.cpp:747">
    <![LOG[End TS policy evaluation]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="policyutil.cpp:10580">
    <![LOG[Policy evaluation initiated]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:3387">
    <![LOG[Sending success status message]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanager.cpp:659">
    <![LOG[MP server http://LONSVR0150.uk.ham.local. Ports 80,443. CRL=false.]LOG]!><time="12:21:03.273+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4855">
    <![LOG[Setting authenticator]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4877">
    <![LOG[Set authenticator in transport]LOG]!><time="12:21:03.288+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:7592">
    <![LOG[Sending StatusMessage]LOG]!><time="12:21:03.304+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="libsmsmessaging.cpp:4020">
    <![LOG[Setting message signatures.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1292">
    <![LOG[Setting the authenticator.]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:1322">
    <![LOG[CLibSMSMessageWinHttpTransport::Send: URL: LONSVR0150.uk.ham.local:80  CCM_POST /ccm_system/request]LOG]!><time="12:21:03.320+00" date="12-18-2014" component="TSManager" context="" type="1"
    thread="1752" file="libsmsmessaging.cpp:8422">
    <![LOG[Request was succesful.]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="0" thread="1752" file="libsmsmessaging.cpp:8758">
    <![LOG[Finalize logging request ignored from process 1748]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tslogging.cpp:1737">
    <![LOG[Waiting for CcmExec service to be fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4019">
    <![LOG[CcmExec service is up and fully operational]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="utils.cpp:4024">
    <![LOG[Access handle will be read from _SMSTSActiveRequestHandle]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:99">
    <![LOG[Access handle: {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:111">
    <![LOG[Attempting to release request using {9F9B91DA-055D-4B32-9817-52C369835080}]LOG]!><time="12:21:03.351+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752"
    file="tsmanagerutils.cpp:118">
    <![LOG[CoCreateInstance succeeded]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="1" thread="1752" file="tsmanagerutils.cpp:133">
    <![LOG[pISoftwareExecutionRequestMgr->ReleaseRequest(ActiveRequestGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanagerutils.cpp,136)]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager"
    context="" type="0" thread="1752" file="tsmanagerutils.cpp:136">
    <![LOG[ReleaseRequest failed with error code 0x80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="3" thread="1752" file="tsmanagerutils.cpp:136">
    <![LOG[Task Sequence Manager could not release active TS request. code 80004005]LOG]!><time="12:21:03.382+00" date="12-18-2014" component="TSManager" context="" type="2" thread="1752"
    file="tsmanagerutils.cpp:165">
    <![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="commandline.cpp:1098">
    <![LOG[Exiting with return code 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="TSMBootstrap" context="" type="1" thread="1728" file="tsmbootstrap.cpp:1032">
    <![LOG[Process completed with exit code 0]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="commandline.cpp:1098">
    <![LOG[Task sequence completed 0x00000000]LOG]!><time="12:21:03.413+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1384">
    <![LOG[Uninstalling Setup Hook]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1427">
    <![LOG[Removing setup hook from registry.]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="0" thread="788" file="vistasetuphook.cpp:143">
    <![LOG[Successfully removed C:\WINDOWS\system32\OSDGINA.DLL]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
    <![LOG[Successfully removed C:\WINDOWS\system32\OSDSETUPHOOK.EXE]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1183">
    <![LOG[Successfully removed C:\WINDOWS\system32\_SMSOSDSetup]LOG]!><time="12:21:06.552+00" date="12-18-2014" component="OSDSetupHook" context="" type="1" thread="788" file="basesetuphook.cpp:1220">

    4005 can mean a few things,  Some common can be  The wrong BIOS time,  or a a bad Hard drive.   look at those two first. 

  • My iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?

    Hello Friends,
    I've two iPod Nanos (4th gen - 8GB). I'm facing a severe problem with both of them. For both iPods, I tried to do this method Simultaneously press the top button + home (central) button. But of no use.
    1. My first iPod is showing a white screen. I could not see anything. But I can listen to songs by blindly pressing the play button twice. The battery comes only for an hour.? How do I get the display and longer battery?
    2. My second iPod is facing more severe problem. None of the buttons are working. When I connect it my PC it showing "CONNECTED- eject before disconnecting". But it is not ejecting with all the usual methods. When I manually and physically disconnect it from the PC the same "CONNECTED- eject before disconnecting" is still showing till the battery goes off. After that if i press any button it is showing low battery signal. And when i re-connect it to the PC the same process is repeating. When I tied to restore it to the factory settings I'm getting "Error" report.
    (I'm using windows 7)
    Friends, Please help me with the above problems. It will be a great help.
    Thank You.
    R.SAMALA

    Sounds like some hardware issues, meaning you'll want to take or send the iPods in for service or repairs. You can choose to have Apple do an out of warranty exchange for the prices indicated in the link below or find another third party service perhaps even local to your area.
    http://www.apple.com/support/ipod/service/prices/
    B-rock

  • After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

    Ok, the issue seem to be solved. The problem was this:
    The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
    By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
    And then LR is reading them and all metadata information has been set / read correctly.
    So this is solved.

Maybe you are looking for

  • Is apple going to continue supporting iWeb

    I've looked around on these forums and can find a lot of speculation about this, but no definite answers as to whether or not Apple will continue supporting iWeb.  Does anyone know?  The program is so easy to use and to make changes to a website.....

  • Messages in Mavericks has no Buddy List?

    Can anyone who updated to Mavericks check to see if you have a Buddy List window in your Messages app (fka iChat)? I don't, nor is there an option for Buddies List window under its Window menu, as normal. The only window that opens is the Messages wi

  • My Bookmarks Created in Word 2013 Dont Display in Microsoft Reader

    I created some bookmarks in my Word 2013 file and I saved it as a pdf. I re-opened the file and when i open the Bookmark diaglog box my bookmarks show in the list. When I select one and click 'go to' it navigates to the book mark. However when i open

  • ITunes "remembers" non-existing info?!

    I entered all the necessary infos for each track manualy. I burned CD. After I finished the job I erased everything regarding this music compilation from my laptop. I inserted other CD (I've burned some time ago) to listen to the music - instead of t

  • HELP! Fatal Error C0000034 applying update operation 303 of 106925 (_00000...)

    I don't know what to do. Installation of the Windows 7 service pack 1 had been interrupted. I started the computer up, and it stuck at the start up screen(black with windows logo and "Starting Windows". I had to force shut down by holding power butto