MANAGING A STANDBY DATABASE-CRITICAL
Hi All,
I had a primary database version 10.2.0.3 which i upgraded to 10.2.0.4. While upgrading the database
i turned off archiving.
After i upgraded the database and brought it up and the listener i started getting errors of
missing archive logs at the standby site.
My standby database is 10.2.0.3.
My question is
1) As i had turned archiving off at the primary site there is a gap in the archive numbers at the primary itself.
arch_1_29345_623164377.dbf
arch_1_29346_623164377.dbf
-rw-r----- 1 oracle dba 5241344 Feb 7 08:43 arch_1_29347_623164377.dbf
-rw-r----- 1 oracle dba 5241344 Feb 7 09:03 arch_1_29348_623164377.dbf
-rw-r----- 1 oracle dba 5241344 Feb 7 09:35 arch_1_29349_623164377.dbf
-rw-r----- 1 oracle dba 2781184 Feb 7 11:57 arch_1_29350_623164377.dbf
--------------------GAP------------------------AS I HAD TURNED ARCHIVING OFF----------------
-rw-r----- 1 oracle dba 5241344 Feb 7 15:57 arch_1_29561_623164377.dbf
-rw-r----- 1 oracle dba 5241344 Feb 7 15:57 arch_1_29562_623164377.dbf
-rw-r----- 1 oracle dba 5241344 Feb 7 15:57 arch_1_29563_623164377.dbf
-rw-r----- 1 oracle dba 5241344 Feb 7 15:57 arch_1_29564_623164377.dbf
I am getting errors that the standby is not in snyc with primary
when i ran query
SQL> SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS
2 FROM V$MANAGED_STANDBY;
on standby database
it says i am missing sequence # 29351 which is due to the fact that there is no sequence like that on
my primary itself.
How should i resolve this gap.
Also is it a good idea to upgrade the oracle home on my standbysite to 10.2.0.4 as i have upgraded
my primary
Hello,
Like I said no easy way out of this situation. First option sync both usign RMAN and section option setup from the scratch (that's might not be possbile).
You can also find similar steps under oracle documentation serach for resolving gaps manually/
Here are the steps for first option, study it and make changes to according to your needs
1. On the standby database, stop the managed recovery process
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
2. On the standby database, find the SCN which will be used for the incremental backup at the primary database:
SQL> SELECT CURRENT_SCN FROM V$DATABASE;
This will used in the rman backup command at step 2.
3. In RMAN, connect to the primary database and create an incremental backup from the
SCN derived in the previous step:
RMAN> BACKUP INCREMENTAL FROM SCN <SCN from previous step>
DATABASE FORMAT '/tmp/ForStandby_%U' tag 'FORSTANDBY';
You must create this incremental backup on disk for it to be useful. When you move
the incremental backup to the standby database, you must catalog it at the
standby as described in Oracle Database Backup and Recovery Advanced User's
Guide. Backups on tape cannot be cataloged.
4. Transfer all backup sets created on the primary system to the standby system (note that there may be
more than one backup file created). For example:
SCP /tmp/ForStandby_* standby:/tmp
5. Connect to the standby database as the RMAN target, and catalog all incremental backup pieces:
RMAN> CATALOG START WITH '/tmp/ForStandby';
6. Recover the standby database with the cataloged incremental backup:
RMAN> RECOVER DATABASE NOREDO;
7. In RMAN, connect to the primary database and create a standby control file backup:
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY FORMAT '/tmp/ForStandbyCTRL.bck';
8. Copy the standby control file backup to the standby system. For example:
SCP /tmp/ForStandbyCTRL.bck standby:/tmp
9. Shut down the standby database and startup nomount:
RMAN> SHUTDOWN;
RMAN> STARTUP NOMOUNT;
10. In RMAN, connect to standby database and restore the standby control file:
RMAN> RESTORE STANDBY CONTROLFILE FROM '/tmp/ForStandbyCTRL.bck';
11. Shut down the standby database and startup mount:
RMAN> SHUTDOWN;
RMAN> STARTUP MOUNT;
12. If the primary and standby database data file directories are identical, skip to step
13. If the primary and standby database data file directories are different,
then in RMAN, connect to the standby database, catalog the standby data files,
and switch the standby database to use the just-cataloged data files. For
example:
RMAN> CATALOG START WITH '+DATA_1/CHICAGO/DATAFILE/';
RMAN> SWITCH DATABASE TO COPY;
13. If the primary and standby database redo log directories are identical, skip to step 14. Otherwise, on the standby database, use an OS
utility or the asmcmd utility (if it is an ASM-managed database) to remove all
online and standby redo logs from the standby directories and ensure that the
LOG_FILE_NAME_CONVERT parameter is properly defined to translate log directory
paths. For example, LOG_FILE_NAME_CONVERT='/BOSTON/','/CHICAGO/'.
14. On the standby database, clear all standby redo log groups (there may be more than
3):
SQL> ALTER DATABASE CLEAR LOGFILE GROUP 1;
SQL> ALTER DATABASE CLEAR LOGFILE GROUP 2;
SQL> ALTER DATABASE CLEAR LOGFILE GROUP 3;
15. If you have flashback enabled:
On the standby database, restart Flashback Database:
SQL> ALTER DATABASE FLASHBACK OFF;
SQL> ALTER DATABASE FLASHBACK ON;
16. If required restart managed recovery in the standby:
On the standby database, restart recovery:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT;Regards
Edited by: OrionNet on Feb 7, 2009 6:43 PM
Similar Messages
-
Standby Database - from READ-ONLY to Managed Recovery
We have a standby database set up for our production environment.
We are able to switch logfile on production and perform the managed recovery and then switch over to READ-ONLY mode. However, when the database is in READ-ONLY mode...I cannot close it if there are active connections.
There are 2 ways I can attempt to close the database...either by "shutdown immediate" or by issuing an "alter system kill session (##,##);"
If I issue the "shutdown immediate", then the RFS process does not transmit any more files...saying the connection to host is not there. Therefore this is not a valid solution.
I can use an alter system kill...to kill all active connections...but it would require to know what other connections are there.
Does anybody know how to best do this...to close the database by forcing all connections to end (except your current one) so you can "alter database close" and switch over to managed recovery?
Please HELP!
Thanks.
-Nicolasu just shutdown the server and restart in standby mode. it will apply all pending archive autometically.
-
ALTER DATABASE RECOVER MANAGE STANDBY DATABASE
During the creation of Logical Standby database (NOAA2), after issuing the statement:
"ALTER DATABASE RECOVER MANAGE STANDBY DATABASE"
the following error appears:
FAL[server, ARC1]: Complete FAL noexpedite archive (thread 1 sequence 46 destination NOAA2)
ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
PING[ARC1]: Error 3113 when pinging standby NOAA2.
Can someone please shed any light on the problem.
Thank you.Perform these steps on Standby and see if it works
%lsnrctl stop
%lsnrctl start -
Cannot Clear Critical Alert for Physical Standby Databases
10.2.0.4.0 Grid Control monitoring 10.2.0.4.0 databases and standby databases with 10.2.0.4.0 agents.
The standby databases are running on Xen guests. The O/S is Red Hat 4 Advanced Server.
I had a failure of Xen guest on Saturday that caused me to have to rebuild the standby servers. EM Grid Control successfully verifies the configurations and the status is normal for both physical standby databases. (A rebuilt logical standby database shows no alerts.)
Grid Control database targets page shows a single critical alert for each physical standby database. The alert is for "number of missing media files is 4". The metric graph shows the count as 0 since before the rebuilds. I cannot clear the alerts from the Critical Alerts page. Grid Control reports "The selected alert(s) cannot be manually cleared. They will clear automatically once the metric is no longer in a critical or warning state.".
Any suggestions?
Thanks,
Ray WestphalThanks for the reply Anthony.
The result of the query on both standby databases is '0'. The metric graph also shows the value at '0' since before rebuilds.
And the OMS db and agents have been reset several times since I posted this.
Ray Westphal. -
MANAGED RECOVERY AT STANDBY DATABASE REQURING OLD ARCHIVELOGS ORA-00308
Oracle 9.2.0.4
HP-UX 11.11i
The database in Archivelog mode, single standby database in managed recovery
mode.
keeping standby in sync with manual applying the ARCHIVELOG from primary to
standby database.
primary database was 3 REDO log members of 100 MB with 1 member each.
what i did, 1 drop and re-create the INACTIVE REDO group for all three, and
make them
5 REDO logs of 200 MB with 1 member each,
then in order to keep fresh copy of primary database onto standby database, i
send the cold backup after 15 days (last week) with standby controlfile.
now, with that standby controlfile and the database, i can mount the database
but while to open the database, receives messages as , it requiring the
ARCHIVELOGS generated log time ago.
changes the REDO groups from 3 to 5 and size 100 to 200 MB at INACTIVE state
### Workarounds Used ###
SQL> alter database mount standby database;
Database altered.
SQL> alter database open read only;
alter database open read only
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/user01/oracle9i/oradata/iobasprd/system01.dbf'
SQL> alter database recover automatic standby database;
alter database recover automatic standby database
ERROR at line 1:
ORA-00279: change 1655989696 generated at 08/12/2005 12:46:25 needed for thread
1
ORA-00289: suggestion :
/user02/oracle9i/oradata/iobasprd/archive/archive_16849.dbf
ORA-00280: change 1655989696 for thread 1 is in sequence #16849
ORA-00278: log file
'/user02/oracle9i/oradata/iobasprd/archive/archive_16849.dbf' no longer needed
for this recovery
ORA-00308: cannot open archived log
'/user02/oracle9i/oradata/iobasprd/archive/archive_16849.dbf'
ORA-27037: unable to obtain file status
HP-UX Error: 2: No such file or directory
Additional information: 3
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /user02/oracle9i/oradata/iobasprd/archive
Oldest online log sequence 53052
Next log sequence to archive 53056
Current log sequence
53056
-----------------------AlertIOBASPRD.log----------------------------
alter database mount standby database
Mon Oct 24 12:05:05 2005
Successful mount of redo thread 1, with mount id 3283884781.
Mon Oct 24 12:05:05 2005
Standby Database mounted.
Completed: alter database mount standby database
Mon Oct 24 12:05:12 2005
alter database open read only
ORA-16004 signalled during: alter database open read only...
Mon Oct 24 12:05:23 2005
alter database recover automatic standby database
Mon Oct 24 12:05:23 2005
Media Recovery Start
Starting datafile 1 recovery in thread 1 sequence 52617
Datafile 1: '/user01/oracle9i/oradata/iobasprd/system01.dbf'
Starting datafile 2 recovery in thread 1 sequence 52617
Datafile 2: '/user01/oracle9i/oradata/iobasprd/TBMS_TS_005.dbf'
Starting datafile 3 recovery in thread 1 sequence 52617
Datafile 3: '/user01/oracle9i/oradata/iobasprd/drsys01.dbf'
Starting datafile 4 recovery in thread 1 sequence 52617
Datafile 132: '/user01/oracle9i/oradata/iobasprd/TBMS_TS_002.dbf'
Starting datafile 133 recovery in thread 1 sequence 52617
Datafile 133: '/user01/oracle9i/oradata/iobasprd/TBMS_TS_003.dbf'
Starting datafile 134 recovery in thread 1 sequence 52617
Datafile 134: '/user01/oracle9i/oradata/iobasprd/TBMS_TS_004.dbf'
Media Recovery Log
Media Recovery Log /user02/oracle9i/oradata/iobasprd/archive/archive_16849.dbf
Errors with log /user02/oracle9i/oradata/iobasprd/archive/archive_16849.dbf.
ORA-279 signalled during: alter database recover automatic standby database...
Mon Oct 24 12:06:01 2005
Restarting dead background process QMN0
QMN0 started with pid=9
The snap of alertIOBASPRD.log can understand me that it requiring the
ARCHIVELOG 52617 only
and its lying in LOG_ARCHIVE_DET location also as
$ pwd
/user02/oracle9i/oradata/iobasprd/archive
$ ls archive_5261*.dbf
archive_52610.dbf archive_52613.dbf archive_52616.dbf archive_52619.dbf
archive_52611.dbf archive_52614.dbf archive_52617.dbf
archive_52612.dbf archive_52615.dbf archive_52618.dbf
$
now, even the files are lying , why ORACLE requing the old archive logs ?????You haven't given any usefuly information on your problem.
show parameter log_archive_dest
show parameter fal
show parameter dg
What errors are in your alert logs ?
What command are you using to recover ?
Check the contents of v$archived_log
# run on primary to detect failures :-
select destination, status, fail_date, valid_now
from v$archive_dest
where status != 'VALID' or VALID_NOW != 'YES';
# run on standby to get exact position of rollforward :-
select thread#, to_char(snapshot_time,'dd-mon-yyyy:hh24:mi'),
to_char(applied_time,'dd-mon-yyyy:hh24:mi'),
to_char(newest_time,'dd-mon-yyyy:hh24:mi') from V$STANDBY_APPLY_SNAPSHOT;
Are you using dataguard broker ? -
Oracle Configuration Manager 10.2.7 on physical standby database
Hi
Did anybody succeed to install and get running OCM on physical standby-database? When starting collection configuration script, i get
an known error ORA-01219.
Any help any tipps?
FeliceHi Tom
Thank you for the information. I think it is the right place to install OCM - not standalone installation - software installed with Oracle Database Enterprise Edition. The problem is only that installCCRSQL.sh can't handle Mounted Database (Standby-Database).
We got similar problems with Grid Control Management Agents, when doing health checks.
Mayby there is as workaround/patch (Opatch).
Regards
Felice -
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
Hi,
on 10g R2, how to know if :
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
DISCONNECT;
is already applied ?
thank you.user522961 wrote:
thanks to all.
Should I issue the following and others on standby or on primary ?
select process,status from v$managed_standby;
Regards.You need execute that from standby instance.In additionally you can see standby instances alert.log.And if this process is active then if you execute this command again then you will get an error like "Media recover is active". -
Standby database management quick notes
Looking for standby database management quick notes
Dataguard Broker or manually initiated failover.
Please stop asking people to abstract docs in order to get 'quick notes'.
Sybrand Bakker
Senior Oracle DBA -
The Critical Problems for Creating Standby Database
The Critical Problems for Creating Standby Database:(I want to create a physical standby database on the same system of the primary database)
1. Should I copy all the backup datafiles, standby controlfile and password file to a same directory before the first time to mount the standby database?
2. Before mounting the standby database, Should I change the datafile's name to a new one in the standby controlfile? How to change them?
3. When issuing the command to mount the standby database, should I specify the controlfile's name.(using which controlfile to mount)
These problems are not clearly secified in Oracle documentations.Can you point us to the Windows specific documentation you refer to?
The parameter DB_FILE_NAME_CONVERT should take care of the new mapping for your datafiles (and LOG_FILE_NAME_CONVERT for logs), so you should be able to put them where you want and use the parameter to point Oracle to the correct location. You should not need to change the name in the controlfile.
Place your standby controlfiles where you have the control files defined in your parameter file and Oracle should recofgnise that it is a standby db. You should not need to specify which controlfiles to use (if this is even possible), your CONTROL_FILES init parameter points to them.
Not sure about the password file....my instances are on separate boxes and the password file has the same name on both primary and standby. -
Standby Database with Recovery Manager
Logical standby database resides on another server. some archive log files are not synced with standby database
I want to recreate standby database with rman
Any step by step documentation ?Before you recreate all and everything, try the troubleshoot hints in the document mentioned in the previous post.
Werner -
Basic Standby Database(Manually Managed) in Standard edition
Hello,
We are using oracle SE where dataguard feature is not available. So we cloned the database and applied archived logs for recovery followed a metalink doc. Everything is good. Now I need to keep my standby in synch with primary, for this i need to manually transfer all the archived logs from primary to standby arch dest location. So any idea as this is a manual process which we cant scp daily...so do we have any script that we can set up in cron to scp the archive logs once during a particular time and then delete them after applying at standby? or else please tell any better idea if you have. Appreciate any help.
Thanks
kumarHello;
It might be simpler to use 'rsync'
rsync -e ssh -Pazv /ora/oracle/arch/ oracle@remote:/export/home/oracle/arch/
There's an example here :
http://www.databasejournal.com/features/oracle/article.php/3682421/Manual-Standby-Database-under-Oracle-Standard-Edition.htm
I use rsync for similar things like when I want to move a group of files without listing them.
Best Regards
mseberg -
Creating standby database using data guard.
Current Env:
Oracle 11.2.0.1
ASM
Size 1.7T and growing.
I'm rebuilding a standby database and need to use rman because of a few factors. In the past, I did a file copy create a standby control file config init.ora and it always worked.
We have a database and had the stanby build; but someone issued a flashback and corrupted the standby database.
Because of the size 1.7T and growing and we are now using ASM.
My research is only showing building standby through rman using dupicate database command.
I would like to copy the cold backup to a external drive and ship it to the standby site where I'll do the restore. This is because of time and bandwith required to rebuild the standby will interfere with operaitions for the period the files are being copied.
So what would be the high level steps.
1) get the cold backup
2) create the standby control file
3) ship the data via corrier
4) restore the database
5) and this is where i'm not sure. recover the standby control file - but during the restore of the database the "normal" control file will open and perhaps do a checkpoint. therefore the standby controlfile will be usless.
6) recover the standby database.
Has anyone accomplished this?
As much specifics will be helpful. This system is operational and needs to be done right the first time.
thanks,
-RobThank you.
1) I'm going to off load the cold backup to an external drive and have a courier take it to the DR site.
Why, we are replicating the SAN over to the DR site. When SAN replication backs up Oracle becomes non-responsive. Therefore; sending the data over the pipe is not an option for the standby rebuild. Yea' that's the easy way to do it. But this system is operational and critical to operations; so we will not risk saturating the pipe for any period of time. The pipe got saturated one time and it was not pretty.
2) I'm running the test in my lab to make sure I can create the standby database using the cold backup and rman.
3) In the past it was easy; I got a cold backup of the data files using the same ksh scripts that have been working for 20 years. Copy the files over to the standby site, and put it into managed recovery. This technique has been working fine sense Oracle 8i days. ASM through a huge monkey wrench in the ksh script backup and now I'm forced to use rman. Hey, I'm told it's an okay product but when it comes to backups I never get fancy; that just makes things more complicated. Okay I wont complain about asm anymore, i guess there is an advantage in there somewhere.
-Rob -
Issue in configuring Standby Database from Active database in 11g by RMAN
POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PMHello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
-
Logs are not getting applied in the standby database
Hello,
I have created a physical standby database and in it the logs are not getting applied..
following is an extract of the standby alert log
Wed Sep 05 07:53:59 2012
Media Recovery Log /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Error opening /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Attempting refetch
Media Recovery Waiting for thread 1 sequence 37638
Fetching gap sequence in thread 1, gap sequence 37638-37643
Wed Sep 05 07:53:59 2012
RFS[46]: Assigned to RFS process 3081
RFS[46]: Allowing overwrite of partial archivelog for thread 1 sequence 37638
RFS[46]: Opened log for thread 1 sequence *37638* dbid 1723205832 branch 765704228
Wed Sep 05 07:55:34 2012
RFS[42]: Possible network disconnect with primary database
However, the archived files are getting copied to the standby server.
I tried registering and recovering the logs but it also failed..
Follows some of the information,
Primary
Oralce 11R2 EE
SQL> select max(sequence#) from v$log where archived='YES';
MAX(SEQUENCE#)
37668
SQL> select DEST_NAME, RECOVERY_MODE,DESTINATION,ARCHIVED_SEQ#,APPLIED_SEQ#, SYNCHRONIZATION_STATUS,SYNCHRONIZED,GAP_STATUS from v$archive_dest_status where DEST_NAME = 'LOG_ARCHIVE_DEST_3';
DEST_NAME RECOVERY_MODE DESTINATION ARCHIVED_SEQ# APPLIED_SEQ# SYNCHRONIZATION_STATUS SYNCHRONIZED GAP_STATUS
LOG_ARCHIVE_DEST_3 MANAGED REAL TIME APPLY ABC 37356 0 CHECK CONFIGURATION NO RESOLVABLE GAP
Standby
Oralce 11R2 EE
SQL> select max(sequence#) from v$archived_log where applied='YES';
MAX(SEQUENCE#)
37637
SQL> select * from v$archive_gap;
no rows selected
SQL> select open_mode, database_role from v$database;
OPEN_MODE DATABASE_ROLE
READ ONLY WITH APPLY PHYSICAL STANDBY
Please help me to troubleshoot this and get the standby in sync..
Thanks a lot..the results are as follows..
SQL> select process, status, group#, thread#, sequence# from v$managed_standby order by process, group#, thread#, sequence#;
PROCESS STATUS GROUP# THREAD# SEQUENCE#
ARCH CLOSING 1 1 37644
ARCH CLOSING 1 1 37659
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
MRP0 WAIT_FOR_GAP N/A 1 37638
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS RECEIVING N/A 1 37638
RFS RECEIVING N/A 1 37639
RFS RECEIVING N/A 1 37640
RFS RECEIVING N/A 1 37641
RFS RECEIVING N/A 1 37642
RFS RECEIVING N/A 1 37655
RFS RECEIVING N/A 1 37673
RFS RECEIVING N/A 1 37675
42 rows selected.
SQL>
SQL> select name,value, time_computed from v$dataguard_stats;
NAME VALUE TIME_COMPUTED
transport lag +00 02:44:33 09/05/2012 09:25:58
apply lag +00 03:14:30 09/05/2012 09:25:58
apply finish time +00 00:01:09.974 09/05/2012 09:25:58
estimated startup time 12 09/05/2012 09:25:58
SQL> select timestamp , facility, dest_id, message_num, error_code, message from v$dataguard_status order by timestamp
TIMESTAMP FACILITY DEST_ID MESSAGE_NUM ERROR_CODE MESSAGE
05-SEP-12 Remote File Server 0 60 0 RFS[13]: Assigned to RFS process 2792
05-SEP-12 Remote File Server 0 59 0 RFS[12]: Assigned to RFS process 2790
05-SEP-12 Log Apply Services 0 61 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 62 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 63 0 Managed Standby Recovery Canceled
05-SEP-12 Log Apply Services 0 64 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 65 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 66 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 67 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 68 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 69 0 RFS[5]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 70 0 RFS[6]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 71 0 RFS[14]: Assigned to RFS process 2829
05-SEP-12 Remote File Server 0 72 0 RFS[15]: Assigned to RFS process 2831
05-SEP-12 Network Services 0 73 0 RFS[9]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 74 0 RFS[16]: Assigned to RFS process 2833
05-SEP-12 Network Services 0 75 0 RFS[1]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 76 0 RFS[17]: Assigned to RFS process 2837
05-SEP-12 Network Services 0 77 0 RFS[3]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 78 0 RFS[2]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 79 0 RFS[7]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 80 0 RFS[18]: Assigned to RFS process 2848
05-SEP-12 Network Services 0 81 0 RFS[16]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 82 0 RFS[19]: Assigned to RFS process 2886
05-SEP-12 Network Services 0 83 0 RFS[19]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 84 0 RFS[20]: Assigned to RFS process 2894
05-SEP-12 Log Apply Services 0 85 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 86 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 87 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 89 0 RFS[22]: Assigned to RFS process 2900
05-SEP-12 Remote File Server 0 88 0 RFS[21]: Assigned to RFS process 2898
05-SEP-12 Remote File Server 0 90 0 RFS[23]: Assigned to RFS process 2902
05-SEP-12 Remote File Server 0 91 0 Primary database is in MAXIMUM PERFORMANCE mode
05-SEP-12 Remote File Server 0 92 0 RFS[24]: Assigned to RFS process 2904
05-SEP-12 Remote File Server 0 93 0 RFS[25]: Assigned to RFS process 2906
05-SEP-12 Log Apply Services 0 94 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 95 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 96 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 97 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Log Transport Services 0 98 0 ARCa: Beginning to archive thread 1 sequence 37644 (7911979302-7912040568)
05-SEP-12 Log Transport Services 0 99 0 ARCa: Completed archiving thread 1 sequence 37644 (0-0)
05-SEP-12 Network Services 0 100 0 RFS[8]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 101 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 102 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 103 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 104 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 105 0 RFS[20]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 106 0 RFS[26]: Assigned to RFS process 2930
05-SEP-12 Network Services 0 107 0 RFS[24]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 108 0 RFS[27]: Assigned to RFS process 2938
05-SEP-12 Network Services 0 109 0 RFS[14]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 110 0 RFS[28]: Assigned to RFS process 2942
05-SEP-12 Network Services 0 111 0 RFS[15]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 112 0 RFS[29]: Assigned to RFS process 2986
05-SEP-12 Network Services 0 113 0 RFS[17]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 114 0 RFS[30]: Assigned to RFS process 2988
05-SEP-12 Log Apply Services 0 115 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 116 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 117 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 118 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 119 0 RFS[18]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 120 0 RFS[31]: Assigned to RFS process 3003
05-SEP-12 Network Services 0 121 0 RFS[26]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 122 0 RFS[32]: Assigned to RFS process 3005
05-SEP-12 Network Services 0 123 0 RFS[27]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 124 0 RFS[33]: Assigned to RFS process 3009
05-SEP-12 Remote File Server 0 125 0 RFS[34]: Assigned to RFS process 3012
05-SEP-12 Log Apply Services 0 127 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 126 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 128 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 129 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 130 0 RFS[32]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 131 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 132 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 133 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 134 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 135 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 136 0 RFS[33]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 137 0 RFS[35]: Assigned to RFS process 3033
05-SEP-12 Log Apply Services 0 138 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 139 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 140 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 141 0 RFS[36]: Assigned to RFS process 3047
05-SEP-12 Log Apply Services 0 142 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 143 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 144 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 145 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 146 0 RFS[35]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 147 0 RFS[37]: Assigned to RFS process 3061
05-SEP-12 Network Services 0 148 0 RFS[36]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 149 0 RFS[38]: Assigned to RFS process 3063
05-SEP-12 Remote File Server 0 150 0 RFS[39]: Assigned to RFS process 3065
05-SEP-12 Network Services 0 151 0 RFS[25]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 152 0 RFS[21]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 153 0 Archivelog record exists, but no file is found
05-SEP-12 Remote File Server 0 154 0 RFS[40]: Assigned to RFS process 3067
05-SEP-12 Network Services 0 155 0 RFS[37]: Possible network disconnect with primary database
Maybe you are looking for
-
Bridge CS4 gallery not showing in Thunderbird or Chrome
OK, I am using Bridge CS4 - when I make a gallery every things goes just fine, save/ upload etc. But when i go to the url in a Thunderbird or Chrome browser the address reverts to local temp folder on my computer ( - file:///C:/Users/Michael/AppData/
-
Can't install fonts in user/library/fonts folder
I have a problem which has a number of different symptoms (I presume they are related as they all started at the same time): I can't install any fonts into my user/library/fonts folder. Or, rather, I can install them but they vanish about five second
-
SQL statement that includes LEFT & RIGHT JOIN in the same statement??? Help
Hi, How an I write an SQL statement with a GROUP BY that will both (a) include the NULL value from the left hand table, but also (b) include ALL columns from the right hand table. It's like I need a LEFT JOIN and a RIGHT JOIN in the query at the same
-
Switch between views in the Document window
This question was posted in response to the following article: http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7fb6a.h tml
-
Hidden and hiding files and folders
how do I hide or unhide hidden files or folders?? I have a directory that I want to hide so that other people can't see it or get access to it. (or at least limit the people who can see it and get access to it.) How do I set it up to protect that dir