Switch between views in the Document window

This question was posted in response to the following article: http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7fb6a.h tml

When using the Code/Design view, I am Unable to Split View vertically or change the design view to the left, as the options are greyed out on my version of CS5.5 Dreamweaver.
I would be grateful if anybody has any suggestions.

Similar Messages

A gap between letters started to show in my indesgn files. tried to undo with tracking, the paragraph settings. nothing helped. it ruins the fluent view of the document. how can i restore the program so that doesn't happen?

a gap between letters started to show in my indesign files. tried to undo with tracking, then with the paragraph settings. nothing helped. it ruins the fluent view of the document. how can i restore the program so that doesn't happen?
for example: say i write a paragraph. then, in a weird some sort of way an involuntary gap suddenly appears between different letters of random words(i did not recognize any pattern to the gap appearing) throughout the entire paragraph. once i've double clicked on that paragraph, and made a minor change, lets say tapped a 'space' key, and then clicked ctrl+z to undo, it has aligned(or fixed) the entire paragraph and made it look ok again. i've tried numerous ways to undo the entire thing, but cannot find the reason. i've been working for a few years and there's no reason why this thing all of a sudden should happen right now.
if anyone has stumbled on something like that and can advise, i would welcome it.
MNS-KG
Vadim

yep...i'm typing with hebrew. i'll make a printscreen with the settings you've asked for@:
if you look closely you'll see that almost every line has a single letter apart. in hebrew there is no usually a singe letter structured words.

How to trap the document window activate event?

Hi All,
I am working with a plugin development application. My requirement is, at any time I may have more than one document opened. The plugin window what I have designed gets populated with data from the xml file attached with the current document. Therefore whenever I switch between the document window, I need the plugin window to be refreshed so that it will load/display the contents from the current xml file.
For this I need to trap the activate document window event. So whenever a window is selected from the current list of opened windows, then the plugin should get refreshed automatically.
Actually, I tried inheriting the CWindowEH class and I used the kDocWindowBoss class for the same. But the event is not firing as expected. Help/tips from anyone could be appreciated.
Thanks in advance.
JR.

Hi, I don't think having observers on kDocBoss and kDocumentListBoss should be a problem. We do exactly that. Just running with a couple of break points in your code, do you hit the DocListObserver::AutoAttach and not the Update(). If you don't hit the AutoAttach breakpoint then it's probably the resource is not set up right. Ours is like this.. /** Observes document list actions. */ AddIn { kDocumentListBoss, kInvalidClass, { IID_IMYDOCLISTOBSERVER, kMyDocListObserverImpl, } }, If you're getting to the AutoAttach but not the Update then it may be that you're not specifying what notifications you wish to receive. Our AutoAttach is like this.. do { InterfacePtr<ISubject> subject( this, UseDefaultIID()); if (subject != nil) { if ( subject->IsAttached(this, IID_IDOCUMENTLIST, IID_IMYDOCLISTOBSERVER) == kFalse ) subject->AttachObserver(this, IID_IDOCUMENTLIST, IID_IMYDOCLISTOBSERVER); } } while ( kFalse ); with equivalent DetachObserver code in the AutoDetach of course.

How to switch between messages in the BlackBerry Hub

With the release of BlackBerry 10 version 10.1, we’ve added a new gesture to the BlackBerry Hub that allows you to quickly switch between your next and previous messages. It’s simple: while viewing a message drag your finger from the left to the right and in one continuous motion swipe up or down.
For example, in the following screenshot you’ll notice I am viewing ‘Test 08”. To get to the next message, “Test 09”, all I need to do is swipe from left to right (red arrow) followed by swiping up (green arrow) in a single motion. To switch to the previous message, “Test 07”, I complete the same gesture, but swipe down instead (blue arrow).
Tip: Using a BlackBerry Q10 or Q5? On top of using this gesture to switch between messages, you also have the option of pressing the N key to view your next message, or the P key to view a previous message.
If this gesture doesn’t appear to be working on your device, verify you are using BlackBerry 10.1.0.4181 or later by going to Settings > About and reviewing the OS Version field. If the OS Version is lower than 10.1.0.4181, check for updates by going to Settings > Software Updates.
For more details about the availability of BlackBerry 10.1, check out Inside BlackBerry’s post on BlackBerry 10 Software Updates.
VIA | helpblog.blackberry.com
http://helpblog.blackberry.com/2013/10/how-to-switch-between-messages-in-the-blackberry-hub/
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I would set up a variable before you get to that node, lets call it $EmpID and assign to it the value of the prompt you want to play lets say 12345 which would be the library promptID. It will then play prompt, get digits, and once you validate if it goes through the expression that flags it as invalid, in that node re-declare the variable, but this time give it the value of the new prompt you want to play, then sent it back to the node which will then play the new prompt and collect the digits.

Drawing directly in the document window

Can anybody provide sample code showing the basics of drawing directly in the document window? I'm thinking of something along the lines of the measure tool (pardon the pun).
It looks like I'm supposed to use either the Annotator Suite or the Document View Suite to "invalidate" a rectangle in the document, followed by doing the actual drawing with the ADMDrawer Suite. But the documentation in this area is pretty sparse (for example GetDocumentViewInvalidRect and SetDocumentViewInvalidRect refer to a "fudged" invalid rect without explaining what that is) and I don't see anything in the Sample Code folder that explains this feature.
Are the little text annotations ("path" "anchor") that pop up when using Smart Guides done using this method?
Thanks,
John

(Sound of crickets chirping...)
Boy, this forum is awfully dead in comparison to the InDesign SDK forum. Is no one writing Illustrator plug-ins anymore?
But hey, I'll keep posting, if only for my own amusement, about my saga of writing a plug-in.
I figured out some of the annotation stuff, but I'm still puzzled by some things.
I started by simply trying to create a tool which would carry a 100x100 box around with it when moved on the screen -- no clicking or dragging yet -- much as the symbol sprayer, for example, has a nice circle (albeit of varying size) around it. I created the tool and added it as an annotator. When it receives a kSelectorAITrackToolCursor message, it simply captures the cursor location in a global and sets the PlatformCursor. When the tool receives a kCallerAIAnnotation message, I have this code:
extern AIErr toolAnnotate( AIAnnotatorMessage *message ) {
    AIErr error = kNoErr;
    error = sView->ArtworkPointToViewPoint( message->view, &g->cursorPoint, &g->cursorPointScreen );
    g->annoBoundsScreen.top = g->cursorPointScreen.v - 50;
    g->annoBoundsScreen.bottom = g->cursorPointScreen.v + 50;
    g->annoBoundsScreen.left = g->cursorPointScreen.h - 50;
    g->annoBoundsScreen.right = g->cursorPointScreen.h + 50;
    ADMDrawerRef dr = sADMDrawer->Create(message->port, &g->annoBoundsScreen, kADMPaletteFont);
    ASRect myRect;
    myRect.top = 0;
    myRect.bottom = 100;
    myRect.left = 0;
    myRect.right = 100;
    sADMDrawer->SetDrawMode( dr, kADMXORMode );
    sADMDrawer->SetADMColor( dr, kADMBlackColor );
    sADMDrawer->DrawRect( dr, &myRect );
    sADMDrawer->Destroy( dr );
    sAnnotator->InvalAnnotationRect ( message->view, &g->annoBoundsScreen );
This (should) convert the cursor location (in artwork coordinates) to screen coordinates, set the annotation boundaries based on this location, create the drawer reference, and draw the 100x100 rectangle within this reference. Finally, it invalidates this rectangle as per the Annotation suite documentation.
I fired up the tool in Illy 10 and saw a single box created down at the 0, 0 point on the page. No box followed the cursor. Hmm. I added an sADMBasic->Beep() to the annotation code and realized what was happening -- my tool was getting an annotation message when first selected, but none when it was merely moved around the screen.
After some futzing around I discovered that if I added a call to sView->SetDocumentViewInvalidDocumentRect in the TrackToolCursor code, I got an annotate message every time the mouse was moved! I captured the previous cursor position and invalidated the rectangle 50 points on all sides from it. and tried again. Success -- partially.
At this point, the cursor could be moved around with the box following it. It suffers, however, from the following bugs:
1) The SetDocumentViewInvalidDocumentRect is in artwork coordinates and so only works at 100% or greater. If I zoom out, my little box leaves trails all over the screen. In addition, if I zoom in, the cursor stutters noticeably -- I assume because Illustrator is forcing a redraw on large portions of the document. I think I can fix both these bugs by recalculating the SetDocumentViewInvalidDocumentRect into screen coordinates. However I note that the circle of the symbol sprayer can be made huge -- as large as the screen -- and it still moves smoothly. So maybe calling sView->SetDocumentViewInvalidDocumentRect is not the way to force annotations. But I haven't been able to discover another way.
2) When the mouse moves into a palette, the square remains "hung up" at the last position where the cursor was in the document window. I think I can fix this by utilizing the Suspend and Resume notifiers and doing one last InvalAnnotationRect when I get the Suspend notification.
3) For fun I tried clicking and dragging. Bad news. If I do this, thereafter the entire Illustrator window only redraws iself in the small rectangle that was set when I created the drawer port. By chance I found that if I use another tool that annotates such as the pencil *before* I use my tool, then everything is fine (although of course the box doesn't follow the cursor around anymore because my toolMouseDrag code is empty). How is using a previous tool "fixing" my code? I don't understand this one at all.
Anyway, I suppose I could fork over a wad of cash and join the ADN and purchase a support case -- but hey, I'm just a hobbyist messing around at this point and facing some rather crappy documentation. Any tips will be much appreciated.
John

Scroll the document window to a specified graphic object

Hi,
anyone knows a way to scroll the document window to a specified graphic object?
I've tried with F_ApiScrollToText() function, but it works only with object containing text, and a graphic object ( like a line) doesn't contain text...
Thanks in advance.

Hi Stemen82,
I have dealt with this in the past and found it to be a bit complex. I've pasted below the functions I came up with to do it. Note that:
- I'm not sure that it works in all cases. Because there is no direct FDK function to do this, you really have to monkey around with things to get it done.
- The code I've pasted should handle both anchored frames and graphic objects, including "floating" graphics. Anchored frames are actually a bit more straightforward because you can get the text location of the anchor.
- All the comments in the code are "notes to self." That is, I didn't write them for you However, they should be of some use to you.
- There may be plenty of other, better ways to do this... this is just what I slapped together to get the basic functionality to work.
Russ
//THIS IS REALLY ONLY GOOD FOR ONE LEVEL OF NESTING,
// ie, one graphic in one anchored frame, in a text frame.
// No testing or implementation for anything else at this point.
//If you don't know whether the object is a graphic or an anchored
//frame, you can send it as the graphic ID and the function will
//figure it out.
// So, either send a graphic ID as graphicId,
// a frame ID as graphicId, or both graphic and frame IDs.
// Don't sent just a frame ID as frameID.
VoidT ws_SelectAndScrollToGraphic(F_ObjHandleT docId,
                                  F_ObjHandleT graphicId,
                                  F_ObjHandleT frameId)
F_ObjHandleT aFrameId = 0,
    textFrameId,
    graphicPageId,
    currentPageId,
    tempGraphicId;
IntT objectType,
    alreadySelected = False;
F_TextRangeT tr;
if(!docId || (!graphicId && !frameId)) return;
//let's get the page. We might need it for scrolling and
//maybe to switch to the correct page type
graphicPageId = ws_GetPageForGraphic(docId, graphicId);
//So far, two possibilities here, either an anchored frame somewhere in the object hierarchy or not.
//If there is no anchored frame, we have to guess based on pages and paragraps. If there is one,
//we can jump to the anchor.
//let's start by looking for an anchored frame if one was not sent
if(graphicId && !frameId)
    objectType = F_ApiGetObjectType(docId, graphicId);
    //if we actually got an anchored frame, we will store the ID.
    if(objectType == FO_AFrame)
      aFrameId = graphicId;
    //otherwise, let's look above to see if there is an anchored frame
    else
      aFrameId = F_ApiGetId(docId, graphicId, FP_FrameParent);
      objectType = F_ApiGetObjectType(docId, aFrameId);
      if(objectType != FO_AFrame)
        aFrameId = 0;
//at this point, if we have an anchored frame, scroll to it
if(aFrameId)
    //let's switch to the appropriate page type, only if necessary
    //we'll do that by simply switching to the first page of that
    //type in the doc before the scroll action
    currentPageId = F_ApiGetId(FV_SessionId, docId, FP_CurrentPage);
    if(F_ApiGetObjectType(docId, graphicPageId) != F_ApiGetObjectType(docId, currentPageId))
      if(F_ApiGetObjectType(docId, graphicPageId) == FO_MasterPage)
        currentPageId = F_ApiGetId(FV_SessionId, docId, FP_FirstMasterPageInDoc);
      else if(F_ApiGetObjectType(docId, graphicPageId) == FO_RefPage)
        currentPageId = F_ApiGetId(FV_SessionId, docId, FP_FirstRefPageInDoc);
      else
        currentPageId = F_ApiGetId(FV_SessionId, docId, FP_FirstBodyPageInDoc);
      F_ApiSetId(FV_SessionId, docId, FP_CurrentPage, currentPageId);
    tr.beg = tr.end = F_ApiGetTextLoc(docId, aFrameId, FP_TextLoc);
    F_ApiScrollToText(docId, &tr);
//if no anchored frame (ie, just a floating graphic),
//let's finangle with some paragraphs and pages and try our
//best. There might be a better way.
else
    // We have the page that the graphic is on, let's at least jump
    // to that page, maybe we can get a little closer later
    F_ApiSetId(FV_SessionId, docId, FP_CurrentPage, graphicPageId);
    //get the parent frame of the graphic which is hopefully a text frame
    textFrameId = F_ApiGetId(docId, graphicId, FP_FrameParent);
    //let's see if we can find a paragraph and scroll to it.
    tr.beg.objId = tr.end.objId =
      F_ApiGetId(docId, textFrameId, FP_FirstPgf);
    F_ApiScrollToText(docId, &tr);
//now, let's do the selection. We'll unselect everything
//that is selected, unless our graphic is already selected.
tempGraphicId = F_ApiGetId(FV_SessionId, docId, FP_FirstSelectedGraphicInDoc);
while(tempGraphicId)
    if(tempGraphicId == graphicId || tempGraphicId == frameId)
      alreadySelected = True;
    else
      F_ApiSetInt(docId, tempGraphicId, FP_GraphicIsSelected, False);
    tempGraphicId = F_ApiGetId(docId, tempGraphicId, FP_NextSelectedGraphicInDoc);
if(!alreadySelected)
    if(graphicId)
      F_ApiSetInt(docId, graphicId, FP_GraphicIsSelected, True);
    else
      F_ApiSetInt(docId, frameId, FP_GraphicIsSelected, True);
//Returns the ID of the page that the graphic is on.
F_ObjHandleT ws_GetPageForGraphic(F_ObjHandleT docId,
                                  F_ObjHandleT graphicId)
F_ObjHandleT tempGraphicId = 0,
    pageId = 0;
while(graphicId)
    tempGraphicId = graphicId;
    graphicId = F_ApiGetId(docId, graphicId, FP_FrameParent);
if(tempGraphicId)
    pageId = F_ApiGetId(docId, tempGraphicId, FP_PageFramePage);
return pageId;

When I open a pdf document from my dropbox to view it, the document shows up blank, even though it is filled out. This also happened with pdf documents that have been e-mailed to me.

When I open a pdf document from my dropbox to view it, the document appears blank, even though I know the information is actually there. This also has happened with pdf documents that have been e-mailed to me, then opened to view and they are blank?? Why are they showing up blank?

When I open emails with PDFs I click on the attachment (doing this all on my iPad) it gives me the option to "open in iBooks", I accept then after that the document is sucked into my iPad but I can't do anything with the PDF after that. Where is the actual file on my iPad? Why can't I email or send these PDFs to my cloud (Dropbox)?
It's like once they go into iBooks they're stuck forever.

How to display the thumbnail view of the documents in Sharepoint Document Library

Is there a way that we can have the thumbnail view of the documents that are uploaded in SharePoint Document Library. We have thumbnail feature in Picture Library but can we have the same in Document Library too. Documents includes Words,Excel,PDF.
Any Suggestions Please

Hey Mike,
Good post, I'd be curious to see if anyone has used the GD Picture SDK with SharePoint, maybe there would be some sample code.
Hey Kukdai,
Developing your own solution would potentially provide a better way to accomplish your task, but before setting out on that long road you may want to try the simple customization, it's less time consuming and it will help gauge your customer's interest and
support.
Also, there is a wealth of open source code for SharePoint available on CodePlex, you might want to check that out as well. Here is the linK:
http://www.codeplex.com/
Also, here is an interesting project to consider for your task:
http://enhancedpicture.codeplex.com/
I hope that helps!
Tom Molskow SharePoint Architect - If I solved the issue please propose my reply as the answer - Thanks!

Why does the document window in illustrator cs6 move to the far left when I reopen the file?

why does the document window in illustrator cs6 move to the far left when I reopen the file?

Hi John,
thanks for the fast response. cs5 remembered the window position. I like having the window in the middle as I have a 27" monitor. I just upgraded to cs6 yesterday and I'm sure it was remembering the window document position. I think. If i find out how to fix this, I'll post it here.
And while I'm on the subject of cs6, why the f*** did adobe combine the stroke and swatches pallettes? Now I forever have to click stroke and swatch tabs all day. And I love the army and navy file icons of photoshop and illustrator. I won't comment on Acrobat X. ; (

Expand the Document Window's Page Name Area

In FW CS4, the area for the page name is too small. It truncates my page names so that I can't tell them apart like this:
Is there any way to expand that are where the page name shows up on the right of the document window toolbar?
Thanks!

That won't work if other users are to recognize what the pages are designed to do.

Why doesn't the image show in the document window?

I am a Photoshop CS5 begI have tried to look for what button I need to click. I can see the document name in the window but there is no image showing in the window. Getting bit frustrated. Please help.
Thank you.

Here's the shot of what I get.
It will show in the layers. But nothing in the document window.

Is it possible to make the document window not to hide behind the palettes?

Is it possible to make the document window not to hide behind the palettes (layers, paths etc) like in CS5? For instance if I want to make a correction in the right part of the image and zoom in, the window expand under the different palettes and I can no longer see the area which I want to correct without change the document window size. I don't want to use the Photoshop application fram because then I can't see stuff in other applications ID, mail an so on.

I have written about how to control various font sizes in Thunderbird here:
http://www.ramsden.org.uk/9_Type_sizes.html
Generally, you shouldn't need to zoom; you can pre-set the display of message text.
To get straight to the point, you should probably try the https://addons.mozilla.org/en-us/thunderbird/addon/theme-font-size-changer/ add-on to address issues with the size of the message list font.

Environment Channel Strips view like the mixer window?

Is there a chance to set the environment Channel Strips view like the mixer window?
The mixer has the new graphic view whereas the environment has the old LP9 graphic view

Requesting features here... doesn't achieve much as the Dev team do not frequent this forum...
Try using the feedback form instead....
https://www.apple.com/feedback/logic-pro.html

Is there any way to bring back the Documents window? [Android]

I liked the Documents window in the previous version where all the PDFs of the phone was shown, plus theor source folder was indicated. Now, it's somehow troublesome to go through my phone's folders just to look for a certain file.

Hi Leslie,
Are you using an Android device or an iOS device? My understanding is that you are able to find local files on your device but it is painful without a consolidated list of PDF's. In addition, if you are using an Android device can you please share your Android OS version (Settings-> About Phone) with us.
-Rahul

When switching between user accounts, the background desktop picture disappears and goes to just a blue background. Whats up with that?

When switching between user accounts, the background desktop picture disappears and goes to just a blue background. Whats up with that?

All fixed! It was TeamViewer that was causing the problem.

Switch between views in the Document window

Similar Messages

Maybe you are looking for