Managing/backing up with git

Would I be able to setup my site as a remote repository with git as a way to backup/update the templates and scripts and is there a way I can hide the actual .git file from public view?
I know there's no way to really run a local version of a site except with webbasics because I can't backup the database but I could at least do everything else.

You can do that Kenneth. Simply create a repository locally by initiating it and then push your changes to some remote repo on github or some other service. Try bitbucket.com. it's free and you can have private repos.
-m

Similar Messages

Is Mobile 2007 Stock Management Service Compatibile with R/3 4.7

Can any one tell me if I can implement Mobile Service - Service Parts management - Van stock with R/3 47 back-end
Installation guide says ERP 6.0 as a landscape requirements..
I have few questions
Can Ii implement CRM Mobile 2007 Service Module including the Vanstock with a R/3 47 Back-end
If I can what is the plug-in I use to integrate the Mobile database to CDB and to R/3
Any help will be rewarded.
Thanks
Raj

Hi Raj,
For using Vanstock scenrios on the mobile service application, SAP ECC 6.0 and SAP Netweaver Mobile 7.1 are the minimum requirements.
It cannot be implemented for any release lower than these because these functionalities/APIs are available from the mentioned releases.
Best Regards,
Pravin..

Mac mini (late 2012) HDMI video going blank randomly in Yosemite 10.10.1; sometimes comes back on with snowy screen

Wow, this reminds me of what happened with Mavericks 10.9.0 until 10.9.3 and later were released and fixed this problem.
My monitor is a Dell S2440L connected to my Mac mini late 2012 via an HDMI cable.
The monitor goes blank randomly and sometimes a snowy screen like you would see when watching a UHF
channel on an old CRT TV shows up when the video comes back on. This happens while in the OS.
I also have power management problems again with computer not sleeping properly and my Magic Mouse
being able to wake up the computer despite "Allow Bluetooth devices to wake this computer" being unchecked.
I also have Wake for network access, power nap and start up after power failure unchecked as well.
Computer sleep and display sleep are set to "never" as I always had it with Mavericks.
These problems occurred after shutting down my Mac and restarting it this morning.
I know using a VGA cable will fix it but I don't want to do that.
Sorry for sounding frustrated but I'm not alone. So many people are having the same issue
of HDMI video blanking out while in the OS.
I love the look of Yosemite but wish I was back with Mavericks 10.9.5 where everything worked
flawlessly and I really mean flawlessly. It was magical. Not a single problem.
I guess we have to wait for 10.10.2 or 10.10.3.
I don't want to go back to Mavericks but if my screen keeps blanking out then my computer is of
no use for work or multimedia.
I'm sorry about the rant.
If anyone has figured out a workaround until Apple can issue another point release, please let me know.
I already tried resetting the SMC and NVRAM several times to no avail.
Thanks in advance.
I appreciate any help.
Paul

EtreCheck version: 2.1.2 (105)
Report generated 13 December 2014 at 9:03:00 AM GMT+7
Hardware Information: ℹ️
Mac mini (Late 2012) (Verified)
Mac mini - model: Macmini6,1
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
DELL S2440L - forced RGB mode (EDID override) 1920 x 1080 @ 60 Hz
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:53:11
Disk Information: ℹ️
APPLE HDD HTS545050A7E362 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 249.62 GB (150.23 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD 2 (disk0s4) /Volumes/Macintosh HD 2 : 249.49 GB (172.23 GB free)
USB Information: ℹ️
Apple Inc. iPhone
Apple, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/DAEMON Tools Lite.app
[not loaded] com.disc-soft.DAEMONTools.VirtualSCSIBus (1.0.2 - SDK 10.8) [Support]
/Applications/TemperatureMonitor.app
[not loaded] com.bresink.driver.BRESINKx86Monitoring (9.0) [Support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.10) [Support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.10) [Support]
/System/Library/Extensions
[not loaded] com.novatelwireless.driver.3G (2.1) [Support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.0.1) [Support]
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) [Support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) [Support]
[not loaded] com.sierrawireless.driver.SierraSupport (1.4.0) [Support]
[not loaded] com.sierrawireless.driver.SierraSupportKicker (1.4.0) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessModem (3.2.6) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSB (3.0.11) [Support]
[not loaded] net.pocketmac.driver.BlackberryUSBDev (3.0.11) [Support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/PlugIns
[not loaded] com.novatelwireless.driver.3GData (2.1) [Support]
/System/Library/Extensions/SMSIWirelessModem.kext/Contents/PlugIns
[not loaded] com.smithmicro.driver.SMSIWirelessCDC (3.2.6) [Support]
[not loaded] com.smithmicro.driver.SMSIWirelessSerial (3.2.6) [Support]
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.rim.BBAlbumArtCacher.plist [Support]
[running] com.rim.BBLaunchAgent.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.disc-soft.DAEMONTools.PrivilegedHelper.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.rim.BBDaemon.plist [Support]
[not loaded] org.virtualbox.startup.plist [Support]
User Launch Agents: ℹ️
[invalid?] com.tencent.xin.WeChatHelper.plist [Support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
uHD-Agent UNKNOWN (missing value)
Google Drive Application (/Applications/Google Drive.app)
MacFortHelper UNKNOWN (missing value)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
Default Browser: Version: 600 - SDK 10.10
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
OctoshapeWeb: Version: 1.0 - SDK 10.8 [Support]
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      5% WindowServer
      0% BBLaunchAgent
      0% AppleSpell
      0% fontd
      0% Google Drive
Top Processes by Memory: ℹ️
241 MB Safari
172 MB mds_stores
155 MB com.apple.WebKit.WebContent
120 MB spindump
103 MB Google Drive
Virtual Memory Information: ℹ️
11.13 GB Free RAM
3.86 GB Active RAM
998 MB Inactive RAM
1.19 GB Wired RAM
2.15 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 13, 2014, 08:10:23 AM Self test - passed
Dec 12, 2014, 03:44:20 AM com.apple.WebKit.WebContent_2014-12-12-0...diag [Details]
Dec 11, 2014, 11:05:33 PM RimAlbumArtDaemon_2014-12-11-230533_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:23 PM RimAlbumArtDaemon_2014-12-11-230523_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:12 PM RimAlbumArtDaemon_2014-12-11-230512_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:05:02 PM RimAlbumArtDaemon_2014-12-11-230502_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:55 PM RimAlbumArtDaemon_2014-12-11-230455_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:42 PM RimAlbumArtDaemon_2014-12-11-230442_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:30 PM RimAlbumArtDaemon_2014-12-11-230430_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:20 PM RimAlbumArtDaemon_2014-12-11-230420_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:11 PM RimAlbumArtDaemon_2014-12-11-230411_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:04:06 PM RimAlbumArtDaemon_2014-12-11-230406_Pauls-Mac-Mini.crash
Dec 11, 2014, 11:03:57 PM RimAlbumArtDaemon_2014-12-11-230357_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:37 AM RimAlbumArtDaemon_2014-12-11-101037_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:26 AM RimAlbumArtDaemon_2014-12-11-101026_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:16 AM RimAlbumArtDaemon_2014-12-11-101016_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:10:08 AM RimAlbumArtDaemon_2014-12-11-101008_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:59 AM RimAlbumArtDaemon_2014-12-11-100959_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:44 AM RimAlbumArtDaemon_2014-12-11-100944_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:34 AM RimAlbumArtDaemon_2014-12-11-100934_Pauls-Mac-Mini.crash
Dec 11, 2014, 10:09:31 AM RimAlbumArtDaemon_2014-12-11-100931_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:53:22 AM SystemUIServer_2014-12-11-095322_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:03:41 AM discoveryd_2014-12-11-090341_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:02:02 AM discoveryd_2014-12-11-090202_Pauls-Mac-Mini.crash
Dec 11, 2014, 09:00:58 AM RimAlbumArtDaemon_2014-12-11-090058_Pauls-Mac-Mini.crash
Dec 10, 2014, 09:55:37 PM QuickTime Player_2014-12-10-215537_Pauls-Mac-Mini.crash

Back-up with Time machine is soooo slow.

First back-up with Time Machine. I have a lot of pictures but not much else - but bout 80 GB. Not using encryption.
The back-up has now run for 24 hours - and has only managed to back-up 8 GB - reminaing time estimated to 8 days !
Back-up by wire to external hard disc (USB 3.0 for HD and 2.0 for Mac)
Is this normal?
Anything I could do to speed it up?

You want Lion and MacBook Pro forums.
Yes TM is slow but it depends on the drive interface and disk drive and whether they have trouble with Mac or Lion (or ML)
I prefer to clone and use one partition for that, say 200GB out of your (1.5TB?) drive and use the rest for TM.
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
TimeMachine 101
https://support.apple.com/kb/HT1427
http://pondini.org/TM/Home.html
http://www.apple.com/support/timemachine/
Time Machine stops backing up to external disk
Mac 101: Time Machine Get to know the ins and outs of Time Machine.
Time Machine: Troubleshooting backup issues

TS3992 My iphone will not back up with iCloud. it keeps popping up a push notification telling me that i do not have enough storage available for the back up. but in my settings and storage it tells me i have 2.8 GB of 5 GB free space, help!?

My iphone 4s will not back up with iCloud. it tells me i dont have enough iCloud storage available, that i can manage my storage in my settings, when i click the settings it tells me i have 2.8 GB free space out of 5 GB. i dont know what to do about this problem. it hasnt been backed up in 3 weeks. and if i still have icloud space avaliable on my phone i do not need to purchase more. i have very few aps backed up on my icloud. i do not understand this help me please

Go to Settings>General>Usage and see how much space is available on your phone (listed at the very top). The pop-up might be telling you that you don't have enough space on your phone to perform the backup, not that you don't have enough space in your iCloud acount to store the backup.

How can I restore the HP's recovery manager back?

Recently, few days back I found my system had some viruses as my machine got slow day by day. I formated the official windows 8.1 that came with the laptop and also formatted all available partitions too. Now, I need that HP's recovery manager back to restore my laptop to its zero meter state. But unfortunately, I have not find any solution to my question after researching it on the forums. I have a local warranty for my laptop. My machine's model is 15-d000se. Can HP help me suggest how can I restore the factory settings back? Is there any solution to my problem? Can I get that HP recovery manager or is there any alternative solution or software that can do this exact job like HP recovery manager. I need to factory reset my hp machine.

Since you deleted/format all original partitions, you will need to use the HP Recovery Media you created when you first setup your computer to return your computer to a factory like state. If you didn't create this media, please contact official HP support in your region / country, via the HP Worldwide Support Portal, to see if HP Recovery Media is available for your computer.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I backed up with an external drive, but it only backed up part, do I erase the complete back up and start again?

My system is OS 10.8.5 Memory 4 GB 1333 MHz DDR3, storage available 375 GB out of 500 GB. Yesterday I tried to back up with the Seagate Backup Plus Drive with 1.5 TB using the Time Machine. The backup started, said it would take 3 hours, but ended at 2 hours when the computer went to sleep when I had to leave the desk.When reviewing "About this Mac",it appears under Macintosh HD the amount of GB for Audio 20.53GB, Movie18.66 GB, Photo 4.56 GB, Apps 11.92 GB, Backups zero KB, Other 64.54 GB on the same menu below, appears the External Seagate Back up plus but with Zero KB on Audio, Movies, Photos, Apps, Backups 74.48 GB, zero KB in Other zero KB.I believe that for some reason the back up was not finished complete and only copied 74.48 GB. My question is how do I erase this and start over so I can have a complete first back up with everything. If I did something wrong, I do not get where it was. Thank you so much.
I
o
Capacity: 499

You let the computer go to sleep. When it did then so did the backup drive. The first bit of advice is do not use the software provided with the Seagate backup drive. The second bit of advice is to completely re-partition and format the drive.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Finally, get a good backup utility to incrementally update the clone.
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

Do time machine back up with HD attached to mac, then change HD location?

I want to do my first time machine back up with the HD directly attached to mac (faster) then take that HD and connect it to my Airport Extreme (dual band) 802.11n router for subsequent periodic back ups (as future back ups, unlike the first one, will be far smaller, obviously).
Is that possible?
If not, what else should I do?
Ethernet directly to the router (a pain for my situation, but possible)

BreeBrizzle wrote:
I want to do my first time machine back up with the HD directly attached to mac (faster) then take that HD and connect it to my Airport Extreme (dual band) 802.11n router for subsequent periodic back ups (as future back ups, unlike the first one, will be far smaller, obviously).
Welcome to Apple's discussion groups.
Is that possible?
Not without a lot of hassle. Time Machine manages backups on a locally-connected disk completely differently from how it managed backup on a network disk. It's possible to convert between the two schemes, but it's not easy.
If not, what else should I do?
Ethernet directly to the router (a pain for my situation, but possible)
I'd back up to the disk while it's connected to the AirPort Extreme, but connected via Ethernet for the first backup. It might minimize the pain if you do that overnight.

Back to Back PRI with MGCP Gateways

I?ve got a 3825 with T1 voice modules (RJ45)..
They are configured as MGCP managed by a set of call managers.
On Friday, I have to integrate this gateway with an old Mitel switch, which will be used during a 2 year phased migration to get calls between old and new systems? To prepare for that, I have setup the T1s back to back for testing/validation that my MGCP config is working.
I can configure those T1s as ?T1 CAS? trunks, and put a crossover cable between them, make a route pattern 3.xxxx and have the call go out one T1, and back in the other, and it works great? The problem is that there?s no caller ID information set. In the trunk configuration screens, there are fields to specify that callerID should, or should not be sent, etc, but it just doesn?t go.. I?m not terribly surprised by this, because I don?t think there?s any protocol defined for the ?plain? T1 to transfer callerID.. I guess I was just hoping that somehow, it would work! :-)
What I would REALLY like to do, is to put these two T1s in PRI mode, since I *KNOW* a PRI can send callerID, but to do that, I have to have one of the ports emulate the CO-side switch.
When configured as PRI signalled T1s, I saw a pull-down that said something like ?Protocol Side? or ?Protocol Mode? (Sorry, it?s not configured as PRI right now, so I can?t look at the verbiage), and the selections were ?Network? and ?User?, which sound to me as if it?s EXACTLY what I need, but I couldn?t get it to come up to even test? It acted as if I had a timing issue, even though I hadn?t changed any timing parameters from the T1 CAS settings that worked (One internal, one external).. I was getting intermittent amber alarms, and the trunk never came up.
Unfortunately, I can only change the configs on this thing early in the morning, because yesterday, some of the MGCP control I was doing through the CM gui actually bounced their WAN T1s that are in the same router, so now I have to be careful!!
What I would like, is to get a definitive answer to whether two MGCP controlled T1s can be back to back in a PRI signaling mode, and/or if there?s another way to get callerID across a T1 link without one end of it being the CO itself. Ultimately, it won't be a cisco-cisco crossover, but rather a cisco-mitel solution, so whatever I come up with MUST be standards based, so at least I can have something to expect the Mitel engineer to be able to do..
Any help would be GREATLY appreciated!!!
-Steve

Steve,
Never tried a back-to-back PRI with both routers being MGCP. I have in my lab two routers back to back with one router being edge voice gateway controlled by mgcp and the other being a pstn simulator. On the edge voice gateway the following configs exist.
controller t1 1/0
pri-group timeslots 1-24 service mgcp
ccm-manager mgcp
mgcp
mgcp call-agent
int s1/0:23
isdn switch-type
isdn incoming-voice voice
On the PSTN router (which emulates a PSTN switch)
controller t1 1/0
pri-group timeslots 1-24
int s1/0:23
isdn protocol-emulate network
isdn switch-type
isdn incoming-voice voice
This should work for back-to-back PRI pretty well.

How would I insert custom HTML built in a managed Backing Bean into a page?

I believe I could solve a project requirement if I could generate/build custom HTML in a managed Backing Bean and insert or place the output between f:verbatim elements.
The custom HTML output would be similar to:
<ul id="menu" class="view">
<li>New Search</li>
<li>Subscriber
<ul>
<li>Device List
<ul>
<li>New Device</li>
<li>Device</li>
</ul>
</li>
<li>Inbox List</li>
<li>Resend</li>
</ul>
</li>
</ul>Looking at the JSF 1.1_01 API, I don't believe there is a placeholder element?
What is the best approach to do this?
Thanks,

This is exactly what you want:<h:outputText value="#{myBean.htmlString}" escape="false" />where getHtmlString() just returns a plain String object with the HTML in it.
A custom component would be a more clever solution anyway.

Gws - A helper to manage workspaces composed of git repositories

Hi everyone,
I recently wrote a small bash script for my own needs. I called it gws for Git WorkSpace.
gws
It is a KISS, bash, colorful, vundle-inspired helper to manage workspaces composed of git repositories.
License: MIT
Website: http://streakycobra.github.io/gws/
Github: https://github.com/StreakyCobra/gws
Installation
A package is available in AUR: gws. There is also a git version for development version, just in case someone is interested: gws-git
Briefly
I encourage you to read the README file on github or the github-pages to get started, because:
This is just a very brief introduction
It takes me a lot of time to write it
That being said, you start by creating a list of projects on which you are working (with their associated urls) in a .projects.gws file in the desired "workspace" folder:
perso/gws | https://github.com/StreakyCobra/gws.git
perso/teafree | https://github.com/StreakyCobra/teafree.git
archlinux/habs | https://github.com/StreakyCobra/gws.git
Then you can update your repository with:
gws update
That will clone the repositories which don't exist yet. Then you just have to hack as usual in your repositories. After a long day of coding, you probably didn't remember which repositories have changed, which where pushed and so on. This is where the principal command shows up:
gws
It displays (see screenshots below) the state of each repository, allowing you to take action for repositories you think that need it.
You can also share the projects file to have exactly the same folder structure in all your computers for instance. But there is also some other functionalities, like an ignore file and a check command. Have a look at the README to get started.
Screenshots

kniren wrote:This is great! One of these tools that you don't know that you need until you know they exist
Glad to see you find it useful. I hope you will enjoy it too.
If you want to try, I just added a new functionality: `fetch`, that do a `git fetch` before showing the status of all repositories. For me it is useful when I am going to take the train and I want to be sure to have the latest code on my laptop. I didn't implement it as default for the `status` command because it is quite slow, and require to have ssh-agent installed to avoid reentering the passphrase multiple time for ssh repositories.
It is available in the `gws-git` package right now.

If I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

if I backed up with a newer version of iOS than the phone I am trying to backup to.. Is there any way to bypass the setup assistant in order to download the new iOS on the new phone then go back and restore from my old phone?

Try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again. If it still won't back up, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.

With Multi-Factor Authentication ENABLED how can a admin connect remotely to manage Office 365 with PowerShell

With Multi-Factor Authentication ENABLED how can office 365 admin connect remotely to manage Office 365 with Power-Shell ?
When I key-in my credentials, auth fails with invalid username and password ?
Does any know the procedure ?

This question was closed over a year ago. You will need to start a new question. You can post a link back here if you think it helps.
I also recommend asking in the O365 developers forum for how to do bulk license upgrades. You can use the answer here and just remove and then add the new license.
¯\_(ツ)_/¯

LabVIEW with Git

Hi all,
I'm in the FIRST robotics community, and next year we're getting a copy
of LabVIEW 8.6 Pro which has the a few programs included for use in
source control.
Anywho, we're interested in using some sort of source control to keep
track of our code and allow simultaneous development with several
programmers. A quick Google search shows little or few relevant results
of using LabVIEW with Git.
I'm wondering if any of ya'll, LabView users, have ever used Git for
tracking your code? If so, how have you accomplished it? If not, what
have you used that is free to use?
Any information would be helpful.
Thanks
-Tanner

I read about TortoiseGit, a clone of tortoiseSVN/CVS for Git, maybe you can configure (and test) the merging and differencing a little bit easier.
Here is a howto to use tortoisesvn and LabVIEW merge.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

User Managed Back-up : ORA-00600: internal error code

Hallo!I was trying to assess whether I can implement a user managed Oracle 10g database backup of an orcl instance (for testing purposes).I know how to use RMAN but I am just curious about a user-managed back-up and recovery solution
My idea was to copy the db files (controlfiles,datafiles,redo log files)in the oradata/orcl directory to a different disk partition,delete the orcl folder,return the copied orcl folder to the oradata folder and startup the instance.
After doing this,I tried to startup the instance but it could only reach the mount stage.When I typed the alter database open command,the error below resulted
ORA-00600: internal error code, arguments: [kcratr1_lastbwr], [], [], [], [],[], [], []
I am aware I can use the recover database command in RMAN but for curiosity purposes,I would like to know if an alternative option exists to recover the db assuming a user managed backup without RMAN.
Thanks.

My idea was to copy the db files (controlfiles,datafiles,redo log files)Was the database
a. SHUTDOWN IMMEDIATE/NORMAL before you did the copy
OR
b. in Backup mode with ALTER DATABASE BEGIN BACKUP
You need either of a. or b. (Oracle cannot stop you from copying files when the database is open but needs to know that they are copied in a fuzzy state and that is one of the several things that the ALTER DATABASE BEGIN BACKUP does).
If you used method b. you also need an ALTER DATABASE END BACKUP, ALTER SYSTEM SWITCH LOGFILE and a backup of the ArchiveLogs generated between the BEGIN BACKUP and END BACKUP.
Hemant K Chitale

Managing/backing up with git

Similar Messages

Maybe you are looking for