Mandatory variable error of report design in Netweaver 2004s

Hi.
I have created a query contained a variable, this variable is provided by sap named 0I_FPER (Period/Fiscal Year (Interval Entry, Required)). I run this query by
BEX Analyzer, the system will popup a dialog to ask me input Fiscal Year/Period,
When i want to select some value to input, the system will give me an error message: "Program error in class SAPMSSY1 method : NCAUGHT_EXCEPTION".
Can anyone help me to solve this problem?
Alex

Hi,
It is a Bug with SAP Netweaver 2004s. Correct the Coding error by applying the note:
Note - 961995 - Variable submission during opening and refreshing query\WB
Assign points if found useful.
Regards,
Srikanth.

Similar Messages

Userexit variables in the report designer

I want to use a query with userexit variables where 1 variable is derived from another variable in the report designer. This does not seem to work, behavious seems to be as follows:
1) when variables are derived from other variables they are filled in step 2 of the variable userexit. Variables filled in step 2 have no effect on the query: everything is selected
2) if the derived variables are mandatory, they even cause a dump saying the variable is empty
3) if variables are filled in step 1 (thus before the selection screen), they do impact the selection. The problem is that step 1 is too early to have access to the other variables.
How can I derive variables from other variables when using the report designer?
Thanks in advance for your answers,
Best Regards,
Filip Ledoux

Hi,
For example if you want use value from variable ZVAR_02 (manual entry) in variable ZVAR_01 (user exit) you can use similar code:
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
   WHEN 'ZVAR_01'.
    IF I_STEP = 2.
      READ TABLE I_T_VAR_RANGE INTO LOC_VAR_RANGE
           WITH KEY VNAM = 'ZVAR_02'.
      IF SY-SUBRC = 0.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW      = LOC_VAR_RANGE-LOW.
        L_S_RANGE-SIGN     = 'I'.
        L_S_RANGE-OPT      = 'EQ'.
        APPEND L_S_RANGE TO E_T_RANGE.
        EXIT.
      ENDIF.
    ENDIF.
ENDCASE.
Variable ZVAR_01 shouldn't be ready to input.
Krzys

Error In Report Designer

Hi
When I'm opening a view in report designer I'm getting the following error.Can anyone please help me with this.Its very urgent for me to sort this issue.
The report designer doesn't support the query drilldown.
Key figure in static filter is not yet supported.
For this particular query I have used only cell definitions in rows and colums.and some Hierarchies are there in the global filter.

Hi Harinath,
I have had this problem due to the fact I had variable in the filter in the query designer, I put fix selection in the filter then generate the report an after I put back my varibale in the filter.
Hope this help.
Eric

Error at report designer while opening the query

Hi
in report designer i am trying to open query
i am getting error like
error while loading query meta data
check the query and portal settings
i am getting this error only this report only
Diagnosis
An error occurred in the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
Start the Visual Administrator, log on to the SAP J2EE Engine and choose "<J2EE_SID>" ->"Server" -> "Services" -> "Log Viewer".
The file "defaultTrace.trc" includes detailed information about the error that occurred. In Windows, you can find this file in the Log Viewer under "Cluster <computer name>" -> "Server <server number>" -> "<drive>:\usr\sap\<SID>\JC<INSTANCE>\j2ee\cluster\server<NUMBER>\log". ". In Unix, the file is located under "/usr/sap/<SID>/JC<INSTANCE>/j2ee/cluster/server<NUMBER>/log".
If the file does not include enough detail about the error, you can increase the log level to obtain more information. To do this, choose "<J2EE_SID>" -> "Server" -> "Services" -> "Log Configurator". On the "Locations" tab page, choose "com" -> "sap" -> "ip" -> "bi" -> "webapplications". Using the selection list on the right side of the screen, you can increase the log level, whereby "DEBUG" represents the log level with the most information. You can save your settings by choosing the "Save" icon. The change to the log level is active immediately. Once you have successfully analyzed the error, you should set the log level back to its default value using the appropriate pushbutton; continuous writing to the log file negatively affects the overall performance of the system.

Hi Suneel,
If you are using any JAVA based applications or objects in the Report designer this error is thrown.
It's better to install Java engine to correct this error.
You must contact Basis people in order to solve this issue.
With Regards,
Ravi Kanth

Errors in Report Designer

Hi,
I am using the report designer for the first time and I am facing the following problems with it:
1. When I insert a data provider (query) in the report designer, all the cells are blacked out. ie, i cannot see the contents in the cells. However, when I click on a single cell, the contents of the cell become visible. When I execute it, I can see the results (all cell contents) fine. Not sure what is happening here.
2. I am able to execute the report on portal but I am unable to generate any print version. When I click 'print version', a new window pops up but it remains blank. Same happens when I try (from the portal) send->export to excel. Are there any settings for PDF and excel that needs to be done?
Thanks!

Have you seen this thread
Black Cells in Report Designer

Error while installing Sneak preview Netweaver 2004 --SP15 on WindowsXP+SP1

hi, i'm getting a error while installing the Sneak preview NetWeaver 2004-SP15 on Windows XP + SP1.
error message: Corrupt GZip trailer
JDK version: 1.4.2_08 and 1.4.2_09
i searched this error on google and i found it's a bug of jdk1.4.2_08.(see this page:<a href="http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4262583">http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4262583</a>) it said this version can't run when the uncompressed file is 2GB or larger. and this bug was fixed after jdk1.5. but i noted that Sneak preview was not tested on jdk1.5.Ignore it, i uninstalled jdk1.4.2_08 and Sneak preview,then i installed jdk1.5 and reinstalled Sneak preview.Unfortunated, i got another error.The error code is 3018.
could anyone please help me?
Regards
bo

I faced this problem while I was installation.
Following are my installation's step, is there any problem?
1.I have a new system just for installation, it is WindowsXP + SP1(2.5G memory and 2 CPU);
2.download JDk 1.4.2_09 from sun.com and installed it;
3.download Sneak preview Netweaver2004SP15 from sdn.sap.com. There are 3 files total.
Two are NW04SneakPreviewSP15.rar, the other is DeveloperStudioSP15.rar;
4.uncompressed NW04SneakPreviewSP15.rar. I used winrar, it's OK.
5.start install NW04SneakPreviewSP15.rar step by step according to the installation guid.
6.to this step 'SAP J2EE Engine Server Core', all are right;
7.error in the step 'Load Java Database Content';
Following are part of the log file 'jload.java.log':
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
2006-3-22 18:26:37 com.sap.inst.jload.Jload main
ÐÅÏ¢: Jload -sec J2E,jdbc/pool/J2E,C:usrsapJ2ESYSglobal/security/data/SecStore.properties,C:usrsapJ2ESYSglobal/security/data/SecStore.key -dataDir C:/backup/NW04SneakPreviewSP15/NWSneakPreviewSP15/SAP_NetWeaver_04_SR_1_Installation_MasterIM01_NT_I386....SneakPreviewContentJDMP -job C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/IMPORT.XML -log C:Program Filessapinst_instdirNW04SR1WEBAS_COPYONE_HOST/jload.log
2006-3-22 18:26:40 com.sap.inst.jload.db.DBConnection connectViaSecureStore
ÐÅÏ¢: connected to J2E on jdbc/pool/J2E
2006-3-22 18:26:41 com.sap.inst.jload.JobStatus readStatus
ÐÅÏ¢: trying to read status file C:usrsapJ2EJC00j2eesltoolsIMPORT.sta
2006-3-22 18:26:41 com.sap.inst.jload.JobStatus readStatus
ÐÅÏ¢: status file IMPORT.sta doesn't exist - no restart
2006-3-22 18:26:41 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: trying to create table ADS_LICENSED_FORMS
2006-3-22 18:26:42 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: table ADS_LICENSED_FORMS created
2006-3-22 18:26:42 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: ADS_LICENSED_FORMS loaded (2 rows)
2006-3-22 18:48:58 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: trying to create table J2EE_CONFIGENTRY
2006-3-22 18:48:58 com.sap.inst.jload.Jload dbImport
ÐÅÏ¢: table J2EE_CONFIGENTRY created
2006-3-22 19:07:53 com.sap.inst.jload.Jload logStackTrace
ÑÏÖØ: java.io.IOException: Corrupt GZIP trailer
at java.util.zip.GZIPInputStream.readTrailer(GZIPInputStream.java:174)
at java.util.zip.GZIPInputStream.read(GZIPInputStream.java:89)
at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:105)
at java.io.DataInputStream.readBoolean(DataInputStream.java:310)
at com.sap.inst.jload.db.FieldHandler.checkAndSetNullValue(FieldHandler.java:46)
at com.sap.inst.jload.db.BigIntHandler.setValue(TinyIntHandler.java:164)
at com.sap.inst.jload.db.DBTable.load(DBTable.java:274)
at com.sap.inst.jload.Jload.dbImport(Jload.java:323)
at com.sap.inst.jload.Jload.executeJob(Jload.java:397)
at com.sap.inst.jload.Jload.main(Jload.java:621)
2006-3-22 19:07:53 com.sap.inst.jload.db.DBConnection disconnect
ÐÅÏ¢: disconnected
I also tried jdk1.4.2_08 and I also installed in Windows2000+SP4. But I faced the same problem too.
From sun.com, I know this error is a bug of jdk. They explained that this version can't run OK
when zip-file is larger than 2G. Then I found here's a file
(name is 'NW04SneakPreviewSP15NWSneakPreviewSP15SneakPreviewContentSDMSDMKIT.JAR'). It's size
is 2.08G. I suppose installation can't manage it.
I tried unzip this file and renamed unziped folder to 'SDMKIT.JAR'.
Then I found another large file in the unziped folder(name is 'F:NW04SneakPreviewSP15NWSneakPreviewSP15SneakPreviewContentSDMSDMKIT.JARpackpackedRoot.jar')
, so I also unzip this file and renamed unziped folder to 'packedRoot.jar'.
Then I reinstalled, of course, It's no work.
Unexpectedly, I found this download link is not available on the sdn.sap.com(see this page:https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6).
It say that 'We apologize that this version is currently not available to download.'.
I guess there are any problem in this version, are there?
So, now I think I must download another version to install.
Thanks,
Bo
Message was edited by: bo zeng

Error while installing Sneak preview Netweaver 2004 --SP11

Hi friends, I am getting the following error while installing the sneak preview Netweaver 2004 on stack 11.It's going smoothly until 14th task and after that the 15th task 'Load java database connectivity ' the system got hanged by just loading 4 rows and it does nothing for hours.It does not give any error message.I am getting the following from the log file.
Output of C:\j2sdk1.4.2_10\bin\java.exe -classpath ./sharedlib/antlr.jar;./sharedlib/exception.jar;./sharedlib/jddi.jar;./sharedlib/jload.jar;./sharedlib/logging.jar;./sharedlib/offlineconfiguration.jar;./sharedlib/opensqlsta.jar;./sharedlib/tc_sec_secstorefs.jar;d:\sapdb\programs\runtime\jar\sapdbc.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_jce_export.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_jsse.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_smime.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/iaik_ssl.jar;D:/usr/sap/J2E/SYS/global/security/lib/tools/w3c_http.jar -showversion -Xmx512m com.sap.inst.jload.Jload -sec J2E,jdbc/pool/J2E,D:\usr\sap\J2E\SYS\global/security/data/SecStore.properties,D:\usr\sap\J2E\SYS\global/security/data/SecStore.key -dataDir C:/SAPNetWeaver04SneakPreviewSlimSP11\J2EE-CD\J2EE-ENG/JDMP -job "C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/IMPORT.XML" -log "C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/jload.log" is written to the logfile C:\Program Files\sapinst_instdir\j2ee_wp\installdefault/jload.java.log.
Could you guys have a look on this?
Regards,
Gopi

Hi,
This problem seems to be linked with the j2se 1.4.2_10.
Please try a fresh installation with the j2se 1.4.2_09
available at http://java.sun.com.
Also check SAP Note 716604.
Do let us know if its solved.
Regards
Srikishan

Error during installation of SAP NetWeaver 2004s Abap Trial Version

The following error occurred during installation of SAP NetWeaver 2004s ABAP Trial Version:
ERROR 2008-03-13 09:47:27
FSL-00001 System call failed. Error 53 (Network path not found.) in execution of system call 'CreateFile' with parameter (
127.0.0.1\sapmnt\trans\bin\DOMAIN.CFG, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, CREATE_NEW, FILE_ATTRIBUTE_NORMAL, NULL), line (763) in file (synxcpath.cpp).
This error occurred at the end of the installation.
Any idea?
Thank's, Thiago.

>
Thiago Amaral wrote:
> Ps: I already restarted my notebook.
That does not automatically start your instance. Have a look at the shortcuts SAP installed in your startmenu. There's both a startscript and a stopscript.

Query Designer on Netweaver 2004s ABAP Sneak Preview

Hello Folks,
I have installed the ABAP sneakpreview, and have activated the BW on client 001.
Most things work well, but i am having problems with starting the Query Designer. I logon to the query designer, but nothing starts up.
In SM50 i see a lot of frontend objects being activated, but after this i do not see the Query Designer coming up. Does anyone have a clue.
Thanks & Best Regards,
Dabre
Message was edited by: Dabre

Hi Dabre,
To work with BI 7 Query designer you have to downlaod latest patches of SAPGUI. Also you need to have MS OFFICE 2003 and .NEt framework installed.
Also check the blog to active your Bex settings in BI 7.
/people/prakash.darji/blog/2006/07/26/troubleshoot-the-sap-netweaver-2004s-bi-frontend-installation
Cheers
Praveen

Application Help for Query Designer for Netweaver 2004S

Does anyone know how to install the Help Files for the Business Explorer Tool for Netweaver 2004S? When I click on the Help>>Applicaton Help from any of these tools, it states it can't find the files. I have it setup and working within ABAP.
Thanks,
Jeff Cook

The help dvd that came with upgrade explains how to setup for the ABAP side, not the Query Designer. Do you know the parameter settings? Does Query Designer help use the sapdoccd.ini file?
Thanks ,
Jeff

GUI error on SE80 in SAP NetWeaver 2004s ABAP trial Edition

I have SAP NetWeaver 2004s ABAP trial Edition installed on WinXP. one problem is that when I run T-code SE80 (Object Navigator) the middle section of the left part of the screen (where it would normally allows you to select object type for display) is not painted. it is just a block of white space! Other parts of the screen seems to work fine (both Top and Bottom sections). Has anyone had such problem? What can I do to fix it? Thank you for your help
Hameed

Patch level 22 is available at service market place, this is the link
Service Market Place -> Support Packages and Patches -> SAP Frontend Components -> SAP GUI FOR WINDOWS -> SAP GUI FOR WINDOWS 6.40 -> Win32 -> gui640_pdb_22-10001615.exe
https://smpdl.sap-ag.de/~swdc/012002523100007929292006D/gui640_pdb_22-10001615.exe?_ACTION=DL_DIRECT
You need the Service Market Place Id for that.
However, this file did not help!
Hameed

Error occured during installation SAP Netweaver 2004s ABAP Trial Version

Hi,
during the installation an error occurred.
log.txt:
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Dec 17, 2006 9:47:57 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/DOKUME1/JRGENS1/LOKALE~1/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I've run RegCleanTool and rerun the installer, result: the same error.
System specs:
Windows XP SP2
Hardware. AMD Athlon XP 3200+, 2,19 GHz, 1,25 GB Ram
The MS Loopback Adapter is correctly installed and ping on permanent IP adress 10.10.0.10 returns ok.
What's wrong?

Hello,
Try to install the MaxDB software manually, then continue with the installation of SAP Netweaver. Check whether there is any another entry of same SID into NSP? if yes then use any another SID for Netweaver system.
Best Regards,
Sachin

Error FSL-01027 when installing Netweaver 2004 Kernel 6.40

Something is wrong with the permissions during installation, i´m failing during phase 2, please see logfile below. I´m running Linux SUSE 10 SP2 and MaxDB configuration. Only ABAP/Dialog instance.
I´m not specified user 500 anywhere during my installation so I´m a bit confused why it asks for that specific user.
Logfile:
ERROR 2009-12-15 10:28:00
FSL-01027 Account user=500 does not exist.
INFO[E] 2009-12-15 10:28:00
Return value of function getpwnam() is NULL.
ERROR 2009-12-15 10:28:00
FSL-01027 Account user=500 does not exist.
ERROR 2009-12-15 10:28:00
MOS-01085 Unable to change permission of file system node /usr/sap/trans/EPS with type DIRECTORY to (sapsys,GROUP,=grwx) (Everyone,GROUP,=rx).
ERROR 2009-12-15 10:28:00
MOS-01105 Processing of one or more file system node operations of table
Content of table: t_SAPComponent_Filesystem_Action_SHARED with condition WHERE WapsSystemName='EUP' AND WapsInstanceName='D00' AND WapsInstanceHost='praeupwas4' AND OpMode NOT IN('CHECKFREESPACE', 'CHECKIF')
Row[0]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/sapmnt/EUP" FollowLinks="TRUE" NodeName="/sapmnt/EUP" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[1]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/sapmnt/EUP/exe" FollowLinks="TRUE" NodeName="/sapmnt/EUP/exe" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[2]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/sapmnt/EUP/profile" FollowLinks="TRUE" NodeName="/sapmnt/EUP/profile" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[3]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP" FollowLinks="TRUE" NodeName="/usr/sap/EUP" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[4]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/D00" FollowLinks="TRUE" NodeName="/usr/sap/EUP/D00" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[5]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/D00/data" FollowLinks="TRUE" NodeName="/usr/sap/EUP/D00/data" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[6]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/D00/data/cache" FollowLinks="TRUE" NodeName="/usr/sap/EUP/D00/data/cache" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[7]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/D00/log" FollowLinks="TRUE" NodeName="/usr/sap/EUP/D00/log" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[8]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/D00/sec" FollowLinks="TRUE" NodeName="/usr/sap/EUP/D00/sec" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[9]    WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/D00/work" FollowLinks="TRUE" NodeName="/usr/sap/EUP/D00/work" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[10]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS" FollowLinks="TRUE" NodeName="/usr/sap/EUP/SYS" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[11]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/exe" FollowLinks="TRUE" NodeName="/usr/sap/EUP/SYS/exe" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[12]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/exe/opt" FollowLinks="TRUE" NodeName="/usr/sap/EUP/SYS/exe/opt" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[13]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/exe/dbg" FollowLinks="FALSE" NodeName="/usr/sap/EUP/SYS/exe/dbg" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grwx) (Everyone,GROUP,=rwx)" NodeTarget="/sapmnt/EUP/exe" NodeType="LINK" OpMode="CREATE"
Row[14]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/exe/run" FollowLinks="FALSE" NodeName="/usr/sap/EUP/SYS/exe/run" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grwx) (Everyone,GROUP,=rwx)" NodeTarget="/usr/sap/EUP/SYS/exe/dbg" NodeType="LINK" OpMode="CREATE"
Row[15]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/gen" FollowLinks="TRUE" NodeName="/usr/sap/EUP/SYS/gen" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[16]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/gen/dbg" FollowLinks="TRUE" NodeName="/usr/sap/EUP/SYS/gen/dbg" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[17]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/gen/opt" FollowLinks="TRUE" NodeName="/usr/sap/EUP/SYS/gen/opt" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[18]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/global" FollowLinks="FALSE" NodeName="/usr/sap/EUP/SYS/global" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grwx) (Everyone,GROUP,=rwx)" NodeTarget="/sapmnt/EUP/global" NodeType="LINK" OpMode="CREATE"
Row[19]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/profile" FollowLinks="FALSE" NodeName="/usr/sap/EUP/SYS/profile" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grwx) (Everyone,GROUP,=rwx)" NodeTarget="/sapmnt/EUP/profile" NodeType="LINK" OpMode="CREATE"
Row[20]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/EUP/SYS/src" FollowLinks="TRUE" NodeName="/usr/sap/EUP/SYS/src" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[21]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/tmp" FollowLinks="TRUE" NodeName="/usr/sap/tmp" NodePermission="(eupadm,USER,=orwx) (sapsys,GROUP,=grx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[22]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/tmp" FollowLinks="TRUE" NodeName="/usr/sap/trans/tmp" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[23]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/EPS" FollowLinks="TRUE" NodeName="/usr/sap/trans/EPS" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[24]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/EPS/in" FollowLinks="TRUE" NodeName="/usr/sap/trans/EPS/in" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[25]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/EPS/out" FollowLinks="TRUE" NodeName="/usr/sap/trans/EPS/out" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[26]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/EPS/log" FollowLinks="TRUE" NodeName="/usr/sap/trans/EPS/log" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[27]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/bin" FollowLinks="TRUE" NodeName="/usr/sap/trans/bin" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[28]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/buffer" FollowLinks="TRUE" NodeName="/usr/sap/trans/buffer" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[29]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/cofiles" FollowLinks="TRUE" NodeName="/usr/sap/trans/cofiles" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[30]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/data" FollowLinks="TRUE" NodeName="/usr/sap/trans/data" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[31]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/etc" FollowLinks="TRUE" NodeName="/usr/sap/trans/etc" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[32]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/log" FollowLinks="TRUE" NodeName="/usr/sap/trans/log" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
Row[33]   WapsSystemName="EUP" WapsInstanceName="D00" WapsInstanceHost="praeupwas4" Key="/usr/sap/trans/sapnames" FollowLinks="TRUE" NodeName="/usr/sap/trans/sapnames" NodePermission="(sapsys,GROUP,=grwx) (Everyone,GROUP,=rx)" NodeType="DIRECTORY" OpMode="CREATE"
failed.
Any ideas?

Are you running the install as root?
Users should be created under /etc/passwd
Regards
Juan

The Report Designer does not support this query drill down colum

Iam working On BI7 When iam doing report desingner when iam opening query through data provider
Iam getting thsi error The Report Designer does not support this query drill down colum colum axis may contain one structure only remove additional dimensions
I modify the cube and i remove some dimensions also My problem is when iam putting characterstics in Colums Iam getting this error When iam removing that charcterstics from colums it was not throuing any error
Chaitanya

hi,
report designer is for front end view design and the designcan be done with restriction to navigation.
you have dynamic and static report designs with restricted navigations.
chk the links for document
http://help.sap.com/saphelp_nw04s/helpdata/en/dd/cea14119eb9f09e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/17/16d941de405f24e10000000a1550b0/frameset.htm
Ramesh

Netweaver 2004S Installation stops in phase 'Create Java Users'.

Hi,
We have an error in the installation of Netweaver 2004s on an Solaris X64 10 (64 bit). We have j2sdk1.4.2_13 (32 bit installed)
In phase 'Create Java Users' , we receive the following error in dev_UserCheck.clone :
'*** ERROR => DlLoadLib: dlopen()= ld.so.1: jlaunch:
fatal: /usr/j2se/jre/lib/i386/server/libjvm.so: wrong ELF class:
ELFCLASS32 -> DLENOACCESS (0,Error 0) [dlux_mt.c 314]
[Thr 4] *** ERROR => Can't load VM shared library (libjvm.so) (rc=-2)
[jhvmxx_mt.c 1576]'
I think this is an java error.
We can't find a download for the 64 supplementation package for solaris
X64. Is this supported?
Kind regards,
Serge Schelles

Hi Serge,
I'm no Solaris expert, but if I'm not mistaken, JRE and JDK versions for the X64 platform are only available as of version 1.5. It's worth a try, you can run them both at the same time on the same server. Just point your JAVA_HOME to the 1.5 directory after installation and start SAPinst again.
Good luck!
Henk.

Mandatory variable error of report design in Netweaver 2004s

Similar Messages

Maybe you are looking for