Mandatory Variable in Key Figure(new selection) does not give Input Screen

Hi,
I have created a query based on a Multiprovider, which uses 0FIGL_C10 & one target DSO.
In colums I was trying to create one new selection type key figure using 0BALANCE infoobject, restricted it by 0FISCYEAR using one mandatory variable. When I am executing this query fiscal year variable is not asking for any value as input.
Being it a mandatory variable it should ask for some input, which is not happening.
Please suggest if I am missing something here or there is some problem with the SAP.
Regards,
Lokesh Kumar
+91 9871097220

Only making a variable mandatory will not make it input enabled...it should be also " Variable ready for input" then only you will get input screen.
Rgds
Amit

Similar Messages

Why a new tab does not give me a preview of frequently visited sites

There is a grid symbol but it minimizes to a screen called "Group Tabs". I have FirefoxESR 31.4.0 version installed.
Any help would be greatly appreciated :)

Hi CL718
Not certain but probably reading this article helps [[Use Tab Groups to organize a lot of tabs]]
'''Are you asking about the new tab page ?'''
These highlight some available sites.
That is opened with keyboard shortcut Ctrl + T , or by keying into the location bar ''about:newtab'' {Note the two dots a colon : )
There is a cog icon top right on that page to change settings. And a what is this link.
* This is our relevant help article [https://www.mozilla.org/firefox/tiles/ A Brand New Tiles Experience]
* And further details in [[How do Tiles work?]]
'''Or are you asking about Tabs Groups'''
These do use a grid icon, and are a graphical method of grouping your open tabs.
*See this article [[Use Tab Groups to organize a lot of tabs]]
*Or compare this article for the more traditional approach [[Use tabs to organize lots of websites in a single window]]

I was able to sync my adroid device prior to upgrading my pc.. currently it is saying that my email is in use but unable to retrive the sync key . plus my FF4 does not give the option to add device

both pc ff4 and android giving a sets of different sync keys and unable to use either of them

You need to get the owner's manual for your Ford's bluetooth system to see how to put your system into discovery mode for the iPhone as well as the appropriate steps to take.
In addition, you should see if the iPhone is supported.

HT201269 my new iphone 5c does not give me the option to restore from icloud backup

I am trying to transfer the data from my old phone to my new one and my new 5c does not give me the option to restore from icloud backup
So now what do I do

Settings>General>Reset>Erase all Content and Settings.
Once this is done, it will ask you to set your phone up again. You can choose to restore from your iCloud backup.

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

When I click on 'open a new tab' or if I select 'new tab' from the file menu a new tab does not open. It used to.

When I click on the tab to 'open a new tab' or when I select 'new tab' from the file menu then a new tab does not open. It used to.

This has recently been answered below - Ask toolbar issue - this was the problem

I try to install my creative suite master collection (student version) on my new mac. the point is that when I want to write the product key. The computer does not accept the number 3. so what can I do ?

I try to install my creative suite master collection (student version) on my new mac. the point is that when I want to write the product key. The computer does not accept the number 3. so what can I do ?

Can you use the number 3 key elsewhere?
[topic moved to Downloading, Installing, Setting Up forum]

Customer Exit variable and Filter routine in DTP does not works?

Hello Experts,
Does anyone know what might be the possible reason - A customer exit variable working fine on the OLAP side does not work in a DTP??
I have also tried to use the Filter routine, which does not give me the right results..I am trying to fetch a Fiscalyear period maintained in an infoObject as follows in my Filter routine..
ata: sel_period like /BIC/PZPARAM-/BIC/ZPARAMVAL.
DATA: zperiod type /BI0/OIFISCPER.
 SELECT SINGLE /BIC/ZPARAMVAL INTO sel_period
 FROM /BIC/PZPARAM
 WHERE /BIC/ZPARAM = 'ZPCA'
 AND objvers = 'A'.
 zperiod = sel_period.
data: l_idx like sy-tabix.
 read table l_t_range with key
 fieldname = 'FISCPER'.
 l_idx = sy-tabix.
 l_t_range-iobjnm = '0FISCPER'.
 l_t_range-fieldname = 'FISCPER'.
 l_t_range-sign = 'I'.
 l_t_range-option = 'EQ'.
 l_t_range-low = zperiod.
 if l_idx <> 0.
 modify l_t_range index l_idx.
 else.
 append l_t_range.
 endif.
 p_subrc = 0.
Please let me know if I am making any mistakes above..
Kind Regards,
Kadriks

Hi
1. CLEAR l_t_range-high. is missing in your code befor assigning values to l_t_range.
2. use simple append l_t_range after the l_t_range asisgnments. remove below code :
if l_idx 0.
modify l_t_range index l_idx.
else.
append l_t_range.
endif.
p_subrc = 0.
3. I dont think you need to assign infoobject.
4. Clear sel_period and zperiod is also missing
Hence your code should be :
data: l_idx like sy-tabix.
read table l_t_range with key
fieldname = 'FISCPER'.
CLEAR l_t_range-high.
l_idx = sy-tabix.
l_t_range-fieldname = 'FISCPER'.
l_t_range-sign = 'I'.
l_t_range-option = 'EQ'.
l_t_range-low = zperiod.
append l_t_range .

On my MacBook with Lion Safari does start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library did not help. Where can I find and remove all components (LastSession ...)?

How can I reset Safari with all components? On my MacBook with Lion, Safari does not start, does not react immediately after trying to open it. Installing a new Safari does not help. Removing parts of Safari in the Library does not help. Where can I find and remove all components as LastSession and TopSites?

The only way to reinstall Safari on a Mac running v10.7 Lion is to restore OS X using OS X Recovery
Instead of restoring OS X in order to reinstall Safari, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
If it's not an extensions issue, try troubleshooting third party plug-ins.
Back to Safari > Preferences. This time select the Security tab. Deselect: Allow plug-ins. Quit and relaunch Safari to test.
If that made a difference, instructions for troubleshooting plugins here.
If it's not an extension or plug-in issue, delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.

Selection does not contain characteristic combination

Hi Gurus,
I am very new to Planning module. When i have created planning sequence on Aggregation level for 0INM_RC02 Cube, system gives error message "Selection does not contain characteristic combination". Can any one help me what is this error msg and how to rectify this one.
With Regards,
Balachander.S

Hi,
you are trying to post the values which are not in combination for characteristic and its attributes.
For example :
Buisness Area, currency.
India - INR
LV10 - GBP
Now you are trying to post India - GBP,which is invalid.Check in the selection if you are deriving any characteristic on the basis of master data for which you are trying to post invalid entries.
Or
You are using characteristic relatioship for which entries are invalid.
or
You are trying to post the data which is not restricted in filter for example :-
If you have restricted currency as INR in filter and trying to post to GBP then you will get this error.
Regards,
Indu

Error msg, "Maximum selection does not contain value 9999999999.

Hi, I am getting this error wile doing Reclassification of HFM Movement.
Error msg, "Maximum selection does not contain value 9999999999 of subassignment HFM CD2 & Asset Type "
in the Data Monitor, ( in Reclass Net Reserve). While running BCF task for a company for period 16/2009
Actually, We have converted the consolidation area from XX(2009) to YY(2010).
Before this task, user has performed the balance carry forward.
My Analysis is as follows:-
Method Used in this Reclassification
RECYX (Reclassify HFM Movement at YE lvl 10)
     TRIGGER
     Items : 100-299, 9900-9999
     HFM Movement Type : O200 to O300
     Posting Level : 10
     TARGET
     Items : 100-299, 9900-9999
     Move : O100C
     Posting Level : 10
     HFM CD2 and Asset type : Ticked
After TEST run in UCMON, the error message comes :-
The "HFM CD2 & Asset Type value 9999999999" is not maintained in Breakdown Categories Y500, Y700 etc.
Breakdown categories in Workbench
Maintained as "OPTIONAL, Initialized value allowed".
Single Selection
1A
1B
AR
GA
Default Selection
99999999999
BCS CUBE
HFM CD2 & Asset Type - coming blank
LOTR
HFM CD2 & Asset Type - Coming blank
Please help to go forward.
In Anticipation,
Deepankar Jain

Thanks a lot Dan for the reply.
Yes, the single selection is 1A, 1B etc, I agree that including this default value 9999999999 in single selection will resolve this issue, but the BREAK DOWN TYPE is OPTIONAL, that means It will also consider a blank value, right?
Also, In the method defined for RECLASSIFICATION in workbench, in the TARGET parameters, the" HFM CD2 and Asset Type" is blank but the "DEFAULT is TICKED" which makes it a mandatory derivation rule.
Please correct me if I am wrong.
Your replies on it are highly appreciated.
Thanks and Regards,
Deepankar

Selection does not contain main type

Hi All,
I am getting the Launch error saying:
"Selection does not contain main type" while running the program in eclipse.
Is there any common aspects from where it is being generated?
Thanks in advance
regards

lkarmacharya wrote:
eclipse launch error: "editor doesn't contain a main type"Hi,
Please don't resurrect old threads, and this isn't an eclipse forum. I'm locking this thread. Create a new one if you have a specific Java programming related problem.
Kaj

[Eclipse Problem] Selection does not contain a main type?

well i am using a GUI builder software which generates java code, i made a simple one to test and it will not compile.
import java.awt.*;
import javax.swing.*;
public class name {
     @SuppressWarnings("unused")
     private void initComponents() {
          panel1 = new JPanel();
          label1 = new JLabel();
          textField1 = new JTextField();
          panel1.setLayout(new FlowLayout());
          label1.setText("Name:");
          label1.setHorizontalAlignment(SwingConstants.LEFT);
          panel1.add(label1);
          textField1.setColumns(12);
          textField1.setText("hi");
          panel1.add(textField1);
     private JPanel panel1;
     private JLabel label1;
     private JTextField textField1;
}it should make a basic swing GUI but it just gives me the error "Selection does not contain a main type"
I did not select in eclipse "use public static void main" i know im not supposed to because this has no main method, but how am i to compile this? =X
Edited by: -Johnny- on May 14, 2008 6:44 PM
Edited by: -Johnny- on May 14, 2008 6:44 PM

-Johnny- wrote:
ya i used javac instead of eclipse then running it complains like you say
but is there any way to compile this code and it will work? I was hoping to use this GUI builder for business purposes but it seems like a waste of money so far if i can't make working java application with it =\The code is fine. You need to learn the basics. Start with the intro tutorials at the Sun type and start reading and coding.
Here is what the rest could look like:
import java.awt.*;
import javax.swing.*;
public class name
    @SuppressWarnings("unused")
    private void initComponents()
        panel1 = new JPanel();
        label1 = new JLabel();
        textField1 = new JTextField();
        panel1.setLayout(new FlowLayout());
        label1.setText("Name:");
        label1.setHorizontalAlignment(SwingConstants.LEFT);
        panel1.add(label1);
        textField1.setColumns(12);
        textField1.setText("hi");
        panel1.add(textField1);
    private JPanel panel1;
    private JLabel label1;
    private JTextField textField1;
    public name()
        initComponents();
    public JPanel getPanel()
        return panel1;
    private static void createAndShowUI()
        JFrame frame = new JFrame("name");
        frame.getContentPane().add(new name().getPanel());
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.pack();
        frame.setLocationRelativeTo(null);
        frame.setVisible(true);
    public static void main(String[] args)
        java.awt.EventQueue.invokeLater(new Runnable()
            public void run()
                createAndShowUI();
}Edited by: Encephalopathic on May 14, 2008 7:10 PM

My new Macbook does not have a DVD slot. How do I install my Kodak printer now?

I can't install my Kodak printer because my new Macbook does not have a DVD slot, as my old Macbook had. How do I install the printer without a DVD? My Kodak printer is not listed anywhere.

Kodak printer model number?
http://support.en.kodak.com/app/answers/detail/a_id/32109/selected/true
http://support.en.kodak.com/app/answers/list/c/890/selected/true
Gatekeeper options:
http://support.apple.com/kb/HT5290?v...S&locale=en_US

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1. Select does not protect unselected areas. Magic eraser erases unselected ares.

Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
https://devtalk.nvidia.com/default/board/98/

Mandatory Variable in Key Figure(new selection) does not give Input Screen

Similar Messages

Maybe you are looking for