Manual call and release

Hello Guys,
I am curious to undertsand the difference between Manual call and release button on IP10. Once we scheduled the job and if we wanted to do a manual release...we select the future schedule and hit the release flag which wud trigger the wo and also in other way we can select the future schedule and hit the maual call button which is also triggering WO with some 90,0000 number .
And also I notice when I try to release it...it would not allow me to relase the schedule if any other schedule was on hold prior to tht.It only allow me to release if the prior schedule has been called .
Pls advice is there any difference and also the releasing the schedule prior to the schedule on hold.
Mahee

Ok...lets say I have scheduled the plan every week and assume 03/23/11 --I have my scheduled on hold and currently I want to do a manul call on that schedule and just higlight it and hit manual call icon...after saving sys will generate the wo..but what happens on 03/23/11...whether again sys generates the WO or not ?
And also in release i could not able to relase the scheule on 03/23/11 today as few of them scheduled were on hold prior to that...so I can only release the schedule only it did not have anything on hold prior to tht.. Lets say if i release it today assuming no other call on hold prior to tht...whether sys will generate the wo on 03/23/11 or not ?
Pls advise
Mahee

Similar Messages

Function (or BAPI, ...) to skip calls and release calls in maintenance plan

Hi, gurus!
We need to find a function (or BAPI, ...) in order to skip a call number in a maintenance plan.
We need a function (or BAPI, ...) to release a call in a maintenance plan, too.
We could use a call-transaction to IP10, but we guess there could be problems with scroll and with pop-up warning messages.
We also thought about using IP30 but there's a problem: if there are previous calls that are not skipped, transaction IP30 releases all those previous calls and we need to skipped them.
Thanks in advance. We really appreciate your help.
Best regards,
J Madariaga

You cannot skip a call in the middle of a list of active calls - this is standard functionality.
Can you please give more info as to why you would want to do this?
PeteA

System Duplicate All Manual calls From Maint Planu2026

Hi All,
The scenario is like this; our plant was shutdown for 3 moths so maintenance team deactivated all the Maint plans. After 3 months or so today they activate the Maint plans and generate manual calls through IP10. Now the problem is, the system generate all these calls twice say duplicating all the calls( one call is generating two times). Same case I am trying to re produce in quality client but its working fine. Can anybody throw some light on it what is the reason behind such system behavior?
Regards,
Anish

Hi NNR,
NO user has not skip any calls. In IP10 user just go in Manual call tab and enter selection date and due package. What i observed here is all the duplicate call having same Maintenance Item no.
for Example Say for plan A, user generate manual call and system generate call no 1 and 2 (call is duplicating) but both orders having common Maintenance Item number 5 why?
Regards
Anish

Calling and using LabVIEW VI's in a C# application : user manual ?

Hi everyone,
I am working on a project (actually a proof of concept) where I need to call and use LabVIEW VI's in a C# application.
I downloaded the example available on this page : Calling LabVIEW VIs from Other Programming Languages.
This example (joined) is working fine, but I would like to know if there is an associated documentation concerning the .NET classes that I can use in C# when I use the namespace "LabVIEW" (using LabVIEW; in C#).
I need to know a little more about the properties and methods that are available (what it does and how to use it).
I looked for it on NI's website and the LabVIEW help but could not manage to find anything interesting.
Is there an official documentation released ? How can I get those informations ?
Thanks for your answer(s).
Regards,
Da Helmut
Attachments:
CallingLabVIEWFromCSharpUsingActiveX.zip ‏114 KB

Hi,
The class browser is usefull (ctrl + shift + b), but I am not developing the C# application on the same computer than the LabVIEW application.
The *.chm file has all the informations in it but I am not finding it well organized. I am drowning in all the informations. I supposed there was a specific help file / manual for the ActiveX methods and properties (a kind of hierarchical view like in the class browser).
Also I supposed that there were different methods and properties that the one available in LabVIEW.
For example when I browse the class in C# I get those weird methods :
Regards,
Da Helmut

IDispatchMessageInspector.AfterReceiveRequest - bypass service call and return manually response

Hi,
I am using a service behavior class that implements IDispatchMessageInspector.AfterReceiveRequest to handle Health Check Service request that require skipping the actual operation's code and instead manually crafting a response message from "BeforeSendReply".
I want to skip any processing on the request and instead want to return manual response from "BeforeSendReply".
It has been pointed out in various forum threads that setting ref request parameter to null will skip the normal message processing and transition directly to BeforeSendReply. I have tracing enabled on my service and observe that underneath it still tries to
deserialize the message and throws an exception:
NullReferenceException: Object reference not set to an instance of an object.
System.ServiceModel.Dispatcher.DispatchOperationRuntime.DeserializeInputs(MessageRpc& rpc)
System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc)
System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)
any idea how can I skip the service call and instead return a manual response back?

This is not correct (setting request to null to bypass the service), unfortunately WCF doesn't have any out-of-the-box way of doing that.
You can, however, use a few more of the extensibility points in WCF to make this scenario work. You'll need at least an IDispatchMessageFormatter (to prevent the message from being read / deserialized since it's not necessary) and an IOperationInvoker (to
actually bypass invoking the service method). You can use the operation context to pass information between those extensibility points.
You can find more information about those three interfaces in my ongoing blog series about WCF extensibility points:
IDispatchMessageInspector: http://blogs.msdn.com/b/carlosfigueira/archive/2011/04/19/wcf-extensibility-message-inspectors.aspx
IDispatchMessageFormatter: http://blogs.msdn.com/b/carlosfigueira/archive/2011/05/03/wcf-extensibility-message-formatters.aspx
IOperationInvoker: http://blogs.msdn.com/b/carlosfigueira/archive/2011/05/17/wcf-extensibility-ioperationinvoker.aspx
The code which uses those extensions to skip the operation based on a decision made in the message inspector:
public class Post_55ef7692_25dc_4ece_9dde_9981c417c94a
[ServiceContract(Name = "ITest", Namespace = "http://tempuri.org/")]
public interface ITest
[OperationContract]
string Echo(string text);
public class Service : ITest
public string Echo(string text)
return text;
static Binding GetBinding()
BasicHttpBinding result = new BasicHttpBinding();
return result;
public class MyOperationBypasser : IEndpointBehavior, IOperationBehavior
internal const string SkipServerMessageProperty = "SkipServer";
public void AddBindingParameters(ServiceEndpoint endpoint, BindingParameterCollection bindingParameters)
public void ApplyClientBehavior(ServiceEndpoint endpoint, ClientRuntime clientRuntime)
public void ApplyDispatchBehavior(ServiceEndpoint endpoint, EndpointDispatcher endpointDispatcher)
endpointDispatcher.DispatchRuntime.MessageInspectors.Add(new MyInspector(endpoint));
public void Validate(ServiceEndpoint endpoint)
public void AddBindingParameters(OperationDescription operationDescription, BindingParameterCollection bindingParameters)
public void ApplyClientBehavior(OperationDescription operationDescription, ClientOperation clientOperation)
public void ApplyDispatchBehavior(OperationDescription operationDescription, DispatchOperation dispatchOperation)
dispatchOperation.Formatter = new MyFormatter(dispatchOperation.Formatter);
dispatchOperation.Invoker = new MyInvoker(dispatchOperation.Invoker);
public void Validate(OperationDescription operationDescription)
class MyInspector : IDispatchMessageInspector
ServiceEndpoint endpoint;
public MyInspector(ServiceEndpoint endpoint)
this.endpoint = endpoint;
public object AfterReceiveRequest(ref Message request, IClientChannel channel, InstanceContext instanceContext)
Message result = null;
HttpRequestMessageProperty reqProp = null;
if (request.Properties.ContainsKey(HttpRequestMessageProperty.Name))
reqProp = request.Properties[HttpRequestMessageProperty.Name] as HttpRequestMessageProperty;
if (reqProp != null)
string bypassServer = reqProp.Headers["X-BypassServer"];
if (!string.IsNullOrEmpty(bypassServer))
result = Message.CreateMessage(request.Version, this.FindReplyAction(request.Headers.Action), new OverrideBodyWriter(bypassServer));
return result;
public void BeforeSendReply(ref Message reply, object correlationState)
Message newResult = correlationState as Message;
if (newResult != null)
reply = newResult;
private string FindReplyAction(string requestAction)
foreach (var operation in this.endpoint.Contract.Operations)
if (operation.Messages[0].Action == requestAction)
return operation.Messages[1].Action;
return null;
class OverrideBodyWriter : BodyWriter
string bypassServerHeader;
public OverrideBodyWriter(string bypassServerHeader)
: base(true)
this.bypassServerHeader = bypassServerHeader;
protected override void OnWriteBodyContents(XmlDictionaryWriter writer)
writer.WriteStartElement("EchoResponse", "http://tempuri.org/");
writer.WriteStartElement("EchoResult");
writer.WriteString(this.bypassServerHeader);
writer.WriteEndElement();
writer.WriteEndElement();
class MyFormatter : IDispatchMessageFormatter
IDispatchMessageFormatter originalFormatter;
public MyFormatter(IDispatchMessageFormatter originalFormatter)
this.originalFormatter = originalFormatter;
public void DeserializeRequest(Message message, object[] parameters)
if (message.Properties.ContainsKey(MyOperationBypasser.SkipServerMessageProperty))
Message returnMessage = message.Properties[MyOperationBypasser.SkipServerMessageProperty] as Message;
OperationContext.Current.IncomingMessageProperties.Add(MyOperationBypasser.SkipServerMessageProperty, returnMessage);
OperationContext.Current.OutgoingMessageProperties.Add(MyOperationBypasser.SkipServerMessageProperty, returnMessage);
else
this.originalFormatter.DeserializeRequest(message, parameters);
public Message SerializeReply(MessageVersion messageVersion, object[] parameters, object result)
if (OperationContext.Current.OutgoingMessageProperties.ContainsKey(MyOperationBypasser.SkipServerMessageProperty))
return null;
else
return this.originalFormatter.SerializeReply(messageVersion, parameters, result);
class MyInvoker : IOperationInvoker
IOperationInvoker originalInvoker;
public MyInvoker(IOperationInvoker originalInvoker)
if (!originalInvoker.IsSynchronous)
throw new NotSupportedException("This implementation only supports synchronous invokers");
this.originalInvoker = originalInvoker;
public object[] AllocateInputs()
return this.originalInvoker.AllocateInputs();
public object Invoke(object instance, object[] inputs, out object[] outputs)
if (OperationContext.Current.IncomingMessageProperties.ContainsKey(MyOperationBypasser.SkipServerMessageProperty))
outputs = null;
return null; // message is stored in the context
else
return this.originalInvoker.Invoke(instance, inputs, out outputs);
public IAsyncResult InvokeBegin(object instance, object[] inputs, AsyncCallback callback, object state)
throw new NotSupportedException();
public object InvokeEnd(object instance, out object[] outputs, IAsyncResult result)
throw new NotSupportedException();
public bool IsSynchronous
get { return true; }
public static void Test()
string baseAddress = "http://" + Environment.MachineName + ":8000/Service";
ServiceHost host = new ServiceHost(typeof(Service), new Uri(baseAddress));
ServiceEndpoint endpoint = host.AddServiceEndpoint(typeof(ITest), GetBinding(), "");
endpoint.Behaviors.Add(new MyOperationBypasser());
foreach (var operation in endpoint.Contract.Operations)
operation.Behaviors.Add(new MyOperationBypasser());
host.Open();
Console.WriteLine("Host opened");
ChannelFactory<ITest> factory = new ChannelFactory<ITest>(GetBinding(), new EndpointAddress(baseAddress));
ITest proxy = factory.CreateChannel();
Console.WriteLine(proxy.Echo("Hello"));
Console.WriteLine("And now with the bypass header");
using (new OperationContextScope((IContextChannel)proxy))
HttpRequestMessageProperty httpRequestProp = new HttpRequestMessageProperty();
httpRequestProp.Headers.Add("X-BypassServer", "This message will not reach the service operation");
OperationContext.Current.OutgoingMessageProperties.Add(
HttpRequestMessageProperty.Name,
httpRequestProp);
Console.WriteLine(proxy.Echo("Hello"));
((IClientChannel)proxy).Close();
factory.Close();
Console.Write("Press ENTER to close the host");
Console.ReadLine();
host.Close();

JIT calls and JIT Schedule release

Dear All,
How to create JIT calls and also let me know how to release JIT schedules for delivery.
Regards,
Mullairaja

Check this
[Scheduling Agreement with Summarized JIT Calls |http://help.sap.com/bp_autov1600/Auto_JP/html/A67_EN_JP.htm]
thanks
G. Lakshmipathi

IPhone 4 Can't receive incoming calls and sms after 3G has been activated

I can't receive incoming calls and sms on my iPhone 4 after the 3G connection has been activated and used actively by me. Outgoing calls and messages do work and as long as I use the Wi-Fi connection everything's fine but the problem appears after switching to 3G. Any help? Thx in advance!

I think the next step is to do a reset by holding the sleep and home buttons down at the same time until the Apple logo appears. If you haven't done this before, keep holding the buttons when the turn off slider appears. The screen will go black and after what seems like an eternity, actually several seconds, the Apple logo will appear. When the logo appears, release the buttons.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen.

When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
Thank you for any help or suggestions,
Chris

I could be corrupted backup.
You can check the notification settings for message.
Settings>Notification Center>Messages>Alert Style
It should be on Banners or Alerts.
Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
Still doesn't work? Settings>General>Reset>Reset all settings

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

3GS died/froze mid-call and will not boot back up

I was on the phone earlier today, and my iPhone 3GS suddenly dropped the call and died. I pushed the power button, and then got the Apple logo screen. The Apple logo screen lasted for an hour, until I tried holding both the power and home buttons several times (both in and out of silent mode), to no avail. When I got home, I plugged it in, but iTunes doesn't recognize it.
I've also tried restore mode, but then it sits with the low low battery screen for about two minutes, and then its back to the logo screen. Help! I haven't installed any new apps in weeks, and this is the first problem I've had with it.

First charge it for a couple of hours using the wall charger, not a computer.
Then hold HOME and SLEEP for 12 seconds to see if it will reboot. If it doesn't restart your computer, connect the dock cable to a USB 2 port on the back of the computer (not a hub or the keyboard) but do not plug it in to the iPhone yet. Hold the HOME button (only) while plugging it in to the dock connector and keep holding. After a couple of minutes you should see an icon on the screen showing a connection to iTunes. Release the HOME button and wait. iTunes should connect and restore the phone. If it doesn't you have a hardware failure and need to get it replaced by Apple.

Purchase and release order not allowed for TECO work orders

Hi
We are typically setting maintenance work orders to TECO once the physical work as been performed as that sets the reference date for showing the history of when the maintenance was performed, and when the maintenance call was completed. However, we have invoices that may come in significantly later than when the physical work was performed.
Once the order is in TECO a purchase or release order (for services against a contract) cannot be created for the work order. Additionally it appears that even if we have a release order,or purchase order, if it is not for the exact amount of the invoice the release or purchase order cannot be ammended - we get the sameerror mssage (BS007) as when creating a new purchase order for the TECO order.
I had wondered about using BS22 to change TECO to continue to allow purchase and release orders when the order is in TECO status.
Any input on pros/cons or other approachs appreciated.
Philip

Thanks
That was what I initially thought. However I was informed that if the invoice is not for the originally determined amount that to post the invoice means having to change the PO, and changing the PO appears to hit the same business transaction as creating a PO, and so we get the error mssage.
The issue is that we may know we need to have services estimated at, say, $5.000. But we do not know what the actual final invoice will be. So the actual amount may end up being $4,500 or $5,500 as an example, and it may come ni late from the vendor. The Purchse Order side is not my expertize, but I am being informed that the invoice must match the PO amount, otherwise the PO must be ammended to match. As the order is in TECO, the user cannot amend the PO.
I would be happy to know of other options, or at least good questions to ask. I want the end user to be able to post the invoice against the PO, after the order is in TECO, even it the invoice amount is not exactly the same as what was originally anticipated.
regards
Philip

How to close an open PO of partial GR and release procedure

Hi friends,
I would like to know how to close an open PO where partial GR has done on it and release procedure exists for that particular PO.
I would also like to know if Invoice is not done for a PO and GR is done, then can we call it as open PO?
Please clarify
Thanks
Jyothi

hi antony..
thank u antony a lot...i ve tried it and working fine..
but can we go in me22n to tick delivery complete for a PO which has already been released? it is showing "u cannot make change because it has already been output
regards,
jyothi

My phone displays numbers instead of contact names for incoming calls and text - how do I fix?

My phone displays numbers instead of contact names for incoming calls and text - how do I fix? It used to display the names if there was a contact listed, now it just shows numbers regardless of whether or not the number corresponds to a contact name in the contact list. Can anyone help? I googled this problem and lots of folks have experienced it, however there is not a consensus for a resolution.

Alexandribill, I have been having the exact same issue. I got a new phone and restored my contacts. If the # doesn't have the area code first then the name isn't shown. I just added my husbands area code to my phone and called my phone from his and now his name shows up...Ugh, I have to go through and manually add the area code to all my contacts....
I'd say Verizon needs to rewrite their program to include the area code in the restoring from backup process!

Batch Derivation - No sender found during manual derivation & order release

Folks,
I'm trying to simulate the batch derivation functionality but couldn't get it work. I have used both manual and release production order derivation events.
Necessary configuration is setup including batch where used list and related derivation configuration.
I have setup the condition records as follows (it is based on pull derivation; 1 receiver and n sender)
For sender condition, I have condition record based on receiving + sending material combination, in which I defined two sending materials (both HALB) along with the receiving material (FERT). VFDAT (SLED) is my field attribute.
For recipient condition, I have condition record based on material number, which is the same FERT material. VFDAT (SLED) is my field attribute and standard rules have been maintained.
Both HALB materials have batches with VFDAT (SLED) dates.
For manual derivation, I created a batch for the FERT without any VFDAT data in it and I'm trying to run DVMAN transaction for this FERT batch to invoke derivation, but it errors with two messages "No sender found for attribute VFDAT" & "The system did not find any sending batches".
I tried using a production order release as well, but it's the same problem.
Any thoughts as to why it is not working??
Thanks!!

Figured it out. I forgot to assign batches before invoking batch derivation.

Batch Derivation - No sender found during both Manual deriv & Order release

Folks,
I'm trying to simulate the batch derivation functionality but couldn't get it work. I have used both manual and release production order derivation events.
Necessary configuration is setup including batch where used list and related derivation configuration.
I have setup the condition records as follows (it is based on pull derivation; 1 receiver and n sender)
For sender condition, I have condition record based on receiving + sending material combination, in which I defined two sending materials (both HALB) along with the receiving material (FERT). VFDAT (SLED) is my field attribute.
For recipient condition, I have condition record based on material number, which is the same FERT material. VFDAT (SLED) is my field attribute and standard rules have been maintained.
Both HALB materials have batches with VFDAT (SLED) dates.
For manual derivation, I created a batch for the FERT without any VFDAT data in it and I'm trying to run DVMAN transaction for this FERT batch to invoke derivation, but it errors with two messages "No sender found for attribute VFDAT" & "The system did not find any sending batches".
I tried using a production order release as well, but it's the same problem.
Any thoughts as to why it is not working??
Thanks!!

Figured it out. I forgot to assign batches before invoking batch derivation.

Manual call and release

Similar Messages

Maybe you are looking for