Manual menu shows two active menu items on one page

Hi--I'm having an issue where a manually-created menu shows two active menu items on the same page (as if two pages were active at the same time).
You can see the issue on my test site here:
http://teknationnewsite.businesscatalyst.com/telecommunications-services.html
On the left hand menu, even though only the Telecommunications Services page is active, the menu shows an active state for the menu item below it also. How can I fix this? The states look like they are created correctly in the states panel.
Thanks,
Jennifer

Okay, never mind. I am an idiot. It was a linking issue. I can't figure out how to delete this thread, however, so just please ignore.

Similar Messages

I would love to be able to drag and drop items from one page to another from the plan window. Is that possible?

In desiging my website, I would like to be able to move items from one page to another by dragging and dropping from the plan architecture screen. It might also help if the window could have a zoom in and out feature to facilitate that.

I just tried zooming in the plan window and discovered it works.

Styling: spacesNavigationPanel region to show currently Active Menu

Hello Friends,
I have a Navigation based on spacesNavigationPanel.regionModel and i have done some styling to it to reduced it's height and background color, highlighted color, but i am not able to show the currently active .... I don't know if i have done it right way or not but my menu is working for height and background and highlighted but i have no idea for currenly active menu... Please any one suggest me .... Below is the code that i used:
.WCSiteTemplateTopNavPanel{
height:24px !important;
background-image:none !important;
.WCSiteTemplateTopNavPanel af|menu{
height:16px !important;
.WCSiteTemplateTopNavPanel af|menu::bar-item{
height:16px !important;
padding:3px 10px 3px 10px !important;
margin:0px !important;
text-align:center;
.WCSiteTemplateTopNavPanel af|menu::bar-item:highlighted, .WCSiteTemplateTopNavPanel af|menu::bar-item:depressed{
height:16px !important;
background-color:red!important;
}jdev: 11.1.1.6.0
Thanks

BUMPED

How to show two or more PDF in one PDF-Reader / Concatenate PDF-Files

Hi,
I want to show two or more PDF files in one PDF reader window or to concatenate two or mor PDF files to one file.
We use WD4A and ADS.
Have someone an idea to solve this without an external program?
Thx in advance
Jürgen

We have done this successfully a few times using WDA - it wasn't easy - it took us 2 full weeks to figure it out, so i need to get full points for this one!
It's going to much easier to do this if you start a brand new WDA. If not, you'll have to re-do all your Context Node navigations within your methods.
The first thing you need to do is to define your Context properly:
You need a top level Node defined as 1:1 cardinality (as with all PDF development)
Next, you need another Container Node 1:n cardinality (this holds the collection of content nodes)
Finally, you have your PDF Content Node 1:n cardinality - This holds each instance of your PDF form
In our scenario, we are passed in a list of Project Numbers. We need to generate a PDF sheet for each project in the same PDF session.
pseudo code - i'm leaving out some of the unnessary details
Loop through the project number table.
ADD 1 TO v_cnt.
* navigate from <TOP> to <PDF_CONTAINER> via lead selection
    lo_nd_pdf_container = lo_nd_top->get_child_node( name = wd_this->wdctx_pdf_container ).
* This is the Important Part - we check to see if there is an element where index = v_cnt
* If not, we create one where we can store the new set of data
* get element via lead selection
    lo_el_pdf_container = lo_nd_pdf_container->get_element( index = v_cnt ).
    IF lo_el_pdf_container IS INITIAL.
      lo_el_pdf_container = lo_nd_pdf_container->create_element( ).
      lo_nd_pdf_container->bind_element( new_item = lo_el_pdf_container
                                           set_initial_elements = ' '   ).
    ENDIF.
    lo_nd_ideasheet_data = lo_el_pdf_container->get_child_node( 'IDEASHEET_DATA' ).
    lo_el_ideasheet_data = lo_nd_ideasheet_data->get_element( index = 1 ).
* fill all the data then bind the structure
Select * from XXX into lt_XXX
where project_number = lt_project-project_number.
* Move Data to appropriate fields/tables
* Bind the info back to the element
    lo_el_ideasheet_data->set_static_attributes( static_attributes =
                                              ls_ideasheet_data ).
Endloop.

Two different TOC styles in one Pages document?

I'm a new Pages 2.0.2 user with a large document with two different tables of contents 20 pages apart. I'm trying to format them differently using different TOC styles but when I change one's style the other one changes as well. Anything I do format-wise to one goes over to the other as well. I'm hoping this is just something I have yet to learn about the product. Any thoughts?
iMac G5 Mac OS X (10.3.9) 1GB Memory

Hi
Someone else might know but this doesn't look good, taken from Pages Help:
"Changing the appearance of text in a table of contents
You can change the appearance of text in a table of contents and also add a leader line between a TOC heading and its associated page number.
To change the appearance of text in a table of contents:
Select the TOC heading you want to change. When you select a TOC heading, all the entries of the same heading type are automatically selected; headings cannot be individually selected.
Click View in the toolbar, and then choose Show Styles Drawer.
The Styles drawer displays a list of table of contents (TOC) styles. The TOC style that corresponds to the selected entry type is also selected.
Do one or more of the following:
To change the appearance of text, change it as you would format any paragraph text. For example, choose Format > Font or use the Text Inspector to make edits.
To create leader lines from a TOC heading to its associated page number, click Inspector in the toolbar, click the Text Inspector button, and then click Tabs. Click the value for the TOC in the Tab Stops list, and then choose a line style from the Leader pop-up menu."

Refrencing an item of one page from another page.

If an item is added in one page then, is it possible to reffer this item in another page. So that if the original item is changed it is refleted in other page as well.

There's also a third, non-portlet solution:
Create a package with a PL/SQL procedure containing item. Set package's grant access rights to "PUBLIC execute". Then call the package as a PLSQL item on a Portal page (schema_name.package_name.procedure_name).
Drawbacks: Not all updates to the package's content will be immediately apparent on Portal pages ... web cache can store outdated content ... but this is a web cache configuration issue.
Advantages: This is really fast to code (using htp.p) and dead-simple to implement. I'm surprised Oracle doesn't showcase simple tools like htp.p and htp.form. Really useful stuff and no thick manuals/whitepapers to slog through. OK, one more advantage, Portal gives the user complete control over item layout ... portlets tend to create whitespace around them.
Mike

How to combine two images in preview onto one page

Sorry if this topic doesn't go here - there wasn't a "preview" category.
I have two images that i want to print out on the same page and right now they are each on a separate page in the same file in preview. Does anyone know how I can combine them onto one page?
Thanks
Message was edited by: p-rock

Hi -
I load two images in Preview and select them.
!http://www.spotsbeforeyoureyes.com/Preview1.jpg!
Then I select Print Selected Images:
!http://www.spotsbeforeyoureyes.com/Preview2.jpg!
When the print dialog box opens, I select Images per Page:2
!http://www.spotsbeforeyoureyes.com/Preview3.jpg!
Hope this helps.
MtD

SmartForm Printing all the Items in one page

Hi,
When iam trying to print the data in the smartform.....it is printing all the data in the one page(if 2 pages are shown in printpriview).But the same invoice is going to be printed in all the plants in the same format...so i hope it is not the printer problem.so any one pls go thru' this thread and try to give the solution as early as possible.....
The main thing is if line items are 18.15 on one page and 3 on second page in printpriview...but while printing the the second page 3 line items are overwriting on the first 3 line items of the first page itself.
Pls Asnwer as it is very Urgent.....
Thnx in Advance

Sorry sir, It is a slip of the tongue, I corrected my response already.
So it is defenitely possible to make ALL the columns appear in the same page in PDF regardless of how much width the report occupies?
If yes, can I see a horizontal scroll bar or the text will be shrinked to fit the page?

Reports from two different users print on one page

Hi, can anyone help?
With Oracle 10g I get the following problem; If two users are running different reports at similar times the user that runs his report second will get his and the previous report on one page, they get combined. The user who ran his report first will get his report correctly.
Thank you
Michael

Thank you for your response. Yes I am using a temp table where I replace variables with paramaters provided by the user. I have rectified the problem by putting in place a check to see if the temp table is in use, if it is a message tells the user to try later. Thank you you were spot on.
Michael

OSX help menu search not activating menu items in Photoshop CC

In Photoshop CS6, about 200 times a day I'd hit Command+Shift+/ to bring up the Help menu focused on the search field, just like I do in all of my apps. I'd type a couple letters from a menu item somewhere in the giant tangle of menu options, down arrow to the match, and hit Enter to action it.
I can still do this in Illustrator CC (and everywhere), but it's gone in Photoshop CC – it all works up to hitting Enter, which just closes the menu without actioning anything.
This is so much faster than mousing through the menu, so much more centralized and extensible than keyboard shortcuts. I miss it.
Here's a quick, dumb screencast showing how this works in Chrome (or any app), but not in PS CC: http://f.cl.ly/items/1p273r0h3k3w202w3m00/screencast.mov
I've contacted Adobe twice, on Photoshop.com (1) and on their support forums (2), and their engineer, Chris Cox, is drawing a line in the sand. He says their team hasn't done anything to provoke this bug, and that it's an Apple issue. Further, he says he can't (or he won't) deal with Apple's engineering directly, and that we users should do so through these forums. So, here's my swing.
(1) http://feedback.photoshop.com/photoshop_family/topics/bring_back_osx_help_menu_s earch_support_in_photoshop_cc
(2) http://forums.adobe.com/message/6145901#6145901

Naw, I got nothing, I didn't even have a search field. Like, empty space, nothing to be found... HOWEVER. I reinstalled PS CC and got the search field back, then changed my shortcut to ⌘⇧+ system wide, and bam.. it worked.
I'm happy.
Greetings also from our mutual friend C. Cox from Adobe... Yeah, that's me.

Curves adjustment flyout shows two active controls

I have read several of the discussions about the curves adjustment flyout showing greyed out controls after use. This also happens on my levels adjustment flyout. On my CS6 curves adjustment flyout, the drag control and the edit points control are both showing up as active and at least it appears that the drag control is working properly. Is this problem also one that Adobe is working on?

I will try using the crop tool in the classic mode. I realize the targeted adjustment tool can be on all the time. My problem is that even if I have the targeted adjustment tool on all the time or it I select it from the flyout, the edit points tool also stays on. In addition, if I move out of the flyout menu into the actual image, the icon that shows is the eyedropper but it changes to the little hand for the targeted adjustment tool when I adjust something in the image. All selections seem to be working but having all these weird icons is confusing.
I'll see if using the crop tool in classic mode fixes this.

Flash menu that highlights the selected item when changing page?

Hi all,
I'm trying to create a menu in flash that will highlight the
current
selected menu item when selecting a specific page.
Example menu:
- home
- products
- product 1
- product 2
- product 3
- contacts
- email
- form
Imagine you have a link in a page that opens the contact >
email page.
Is there a way to get the flash menu to highlight the
"contacts > email"
item when displaying this page?
Something similar to this
http://tinyurl.com/5c9993
Is there an application that can do this easily?
Thanks in advance for any idea.
Tony

here is a link to a rar file i just updated for ya.
it is a flash movie and 2 web pages. showing how u can send
variables to flash with java script.
http://www.wholesalegranitedist.com/home/tutorials/jsquery.rar
if you can't get this file let me know i will just post it
here.
you will have to change the menu depending on which variable
u send. to flash. it can change on which page you visit;). ask more
questions if you need to. or private message me.

How to use two different report items in SSRS page header

Hi All,
Can we use more than one report item in SSRS 2008 R2 page header...
Like this in expression..
=IIF(Globals!PageNumber=1,ReportItems!Col1.Value,ReportItems!Col2.Value)
Whenever Globals!PageNumber=1 I want to show values present in Col1 and when Globals!PageNumber<>1 then show values present in col2
Also let know if any other work around is there to meet above criteria...
Thanks,
RH
sql

Hi RH,
Based on my research, a text box in the page header can only refer to the ReportItems built-in collection once in an expression. So if we directly use the expression in the page header, we can receive the error message that “The Value expression for textrun’’
refer to more than one report item. An expression in a page header or footer can refer to only one report item”.
To work around the issue, we can add two text boxes to the page header: one for the textbox col1 value (=ReportItems!Col1.Value), another for the textbox col2 value (=ReportItems!Col2.Value). Then use the expressions as below to control the visibility of
those textboxes:
=iif(Globals!PageNumber=1,false,true)
=iif(Globals!PageNumber<>1,false,true)
Please note that only text boxes on the current page are available as a member of the ReportItems collection in a page header or page footer section. For example, if ReportItems!textbox_name.Value refers to a text box that only appears on the first page
for a multipage data region, we cannot see a value on other pages except the first page.
Reference:
Using the ReportItems Collection References (Report Builder 3.0 and SSRS)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to show two queries/ aggregation levels in one Chart in Web Template

Hi Experts,
I have a question regarding showing a graph in a Web Application template.
The graph has two elements on it. The key figure is average number of working days, but the requirement is to compare number of working days for a granular data level (time spent in each process stage per month) to the average across all process stages across the entire month.
So essentially what we have is a chart with one constant horizontal line across it, which is the overall average, across all process stages, for the whole month, and then underneath this horizontal line, a series of columns showing the average for each process stage, broken down.
I am having trouble getting the base query right for this requirement. It feels like for each process stage, I need two key figures (for the two data series); one average per stage, and the other should be the overall average, populated once for each stage.
I couldn't make this work using cells or replacement path, and I assume that you can only use one data provider per chart in the WAD.
Can anyone help me? Please let me know if you need more info. It's a shame I can't post a picture of the required graph in this post.
Thanks
Mischa

Hi Mischa,
If I am reading your description correctly you should be able to model your two Key Figures in the query by having the two Key Figures exactly the same, exept give one an exception aggregation to average with reference to characteristic 0CALMONTH.
So you have your business process and calendar month in your rows, and the two Key Figures in the columns one with standard aggregation and one with exception aggregation on month. This should give you the KF amount per process wthin each month as well as the average KF amount over the month.
Hope this helps,
Nick

How to show two seperate pivot tables with one select column

Hi All
My client wishes to have two pivot tables, one showing positive results and the other showing negative results.
For Example:
DIMENSION
BUSINESS A          1000
BUSINESS B          500
BUSINESS C          100
DIMENSION
BUSINESS A          -1000
BUSINESS B          -500
BUSINESS C          -100
Is it possible to then select the different DIMENSION with one select column for both?
Thanks

Not sure I got it right try this
for Number column pull twice and set col*-1
use 2 pivot table for each number type
cool as ~ http://cool-bi.com

Manual menu shows two active menu items on one page

Similar Messages

Maybe you are looking for