Manual operator selection not sticking

Hello
I use international roaming on a daily basis.
I am using a N95, when i go into networks/operator selection/manual selection. I select my network manually and it is fine.
However it seems like whenever a stronger signal is detected it swaps , doesnt matter what network its on to.
I have had my mobile swapped, with no effect, i have debranded the phone with no change, I loaded the latest firmware with no change.
Can anyone let me know if this is another **bleep** im not adult enough to look make my own choices 'feature' on the nokia n95

very strange, when i'm abroad and i loose signal from one operator the phone will prompt to select another, it wont automatically lock on,
does it really matter who your roaming with? so long as u have signal that's all dat matters.
Blackberry Bold

Similar Messages

Manual operator selection BUG!!!

I have an N73 phone. When i am abroad roaming and i use the manual operator selection the phone reverts to automatic operator selection within a minute and overrides my previous manual selection. I find this bug very irritating and i think nokia should post a solution ASAP. Anybody any ideas?
Nik

I did few test with different SIM card from different operator and at least for me seems that only TRE (Italy) and THREE (uk and ireland) are blocking the manual operator selection.
When instead i used TIM (Italy) , or VODAFONE (italy or ireland) the operator selection was stick to MANUAL.
I have a N95 unbranded latest firmware. but the same BUG is with my N73ME.
Using a Samsung i600 with Microsoft WM6 the operator selection di work with all my SIM card .
Does anybody have any idea why the Symbian s60v3 have this bug?

5230 manual operator selection problem

Hi,
I recently detected that the manual operator selection does not behave as intended with my 5230 (Software release 20.0.005). I wanted to manually select "tre" in italy because I'm "drei"-customer in austria and 3 has this nice 3LikeHome feature where you have no roaming costs when you use a 3 network in a foreign country. So I switched the operator selection to be manual and after the nework search I selected 3 as provider. But as soon as I was out of the reception range of the selected network the phone automatically selected another network although the user manual says that if the connection to the manually selected network is lost, the device sounds an error tone and asks you to reselect a network. Can anyone confirm this behaviour?
Thanks,
Gerhard

Sim card are activated only for one particular operator provider, selecting the other only means that the sim is not for the other one. In locations where there are plenty of providers you'll find as many as there are & being in manual you have to be certain which one. In automatic mode, it queries one after the other in round robin fashion until it gets an access. I've noticed that too, that different models of Nokia phone have diferent strenght of radio signals transmit/recieve. It's not surprising to to see one model have more bars (signal strenght) than others.
Message Edited by android on 29-Aug-2009 02:14 PM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

E65 won't remember manual operator selection (roam...

Hi,
while roaming, I can't get my e65 to remember manual operator selection, the setting will only last for one call, and then go back to automatic.
My operator(3 Austria)'s service hotline claims that this is an issue in ALL Nokia handsets and can't be solved. I find this hard to believe, as that behaviour oft the phone is clearly a bug. If anything, I could imagine 3 gives out all the Nokia handsets (or not just the Nokia phones, but all of them) with this bug installed to make more money out of roaming fees.
Any similar experiences?
Any ideas if and how this could be fixed?
thanks, Ben
Solved!
Go to Solution.

Hi,
I found something like a workaround for this problem.
here goes:
If you can't disable automatic operator selection, switch the network mode from dual (jumping between umts and gsm) to umts only. that way, in countries that have 3, you will almost always get 3 automatically selected, maybe because it doesn't have a gsm-signal but just umts.
I don't know though about other operators in other countries, probably this method is always going to get you the operator with the strongest umts signal.
cheers, Ben

Nokia 6230 question (manual operator selection)

When I go: Menu > Settings > Phone Settings > Operator Selection > Manual I get a list of networks. I'm being trying to establish the relative strength of these networks and was wondering if the order has any significance. I'm pretty sure that the first operator in the list is likely to be the strongest, and was wondering if I can deduce if the others are in order of signal strength.
Can anyone confirm this?

not necessarily, it provides you with the list of operators but you can't use all of them, you can only use the provider that you have the sim card for. click on a option from non provider, you should not be able to have any service as your options are dependent on your sim card/opearator/mobile network provider.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Manual Operator Selection

Hi
I have an factory unlocked 3gs and live in an area where the signals from mobile operators from a border country can be picked up. Occasionally, my Iphone changes operator automatically due to it picking up a stronger signal and the problems are obvious (namely that I get charged for receiving calls as I am roaming).
So, my question is, can the Iphone be made to only switch to another operator upon request (such as all other mobile phones). I've gone through the obvious parts of the menus (network etc) but cant seem to find a way to do it...
Many thanks

Turn off automatic network selection. I think it's a case here of you can't have your cake, and eat it

Scratch disk selection not sticking

I'm in Illustrator CS4 on my Mac Pro. I'm trying to set my primary scratch disk to my internal RAID disk, secondary to my Main.
I make the selections in Prefs and get that 900 year old icon telling me that changes will take effect after I restart Illustrator. So I dutifully restart Illustrator. When I look at my Prefs again, my selections are gone. Anyone know how to get these to actually work?

Trashing prefs did it. Yesssssssss.
Unfortunately every article about and mention of trashing prefs seems to leave out the crucial *how*, which I eventually figured out and posted to: http://forums.adobe.com/message/2133838#2133838
Adobe would do well to include this level of detail in their unweildy help/support.
And to use a less infuriating text editor for comment editing.
Thanks all!

Different carrier, despite manual network selection

Why does the manual network selection not fix the chosen network carrier.
I use the option manual network selection, select my preferred network carrier, but once I loose the connection to the chosen carrier (train ride), my iPhone 3GS starts a new search and switches to a different available carrier, despite manual network selection activated. As far as I was concerned, manual network selection should prevent the iphone 3GS to search for a different carrier, except the one chosen.
When I go back into the network selction menu, manual network selection is still activated and a checkmark is set on the preferred chosen network. Despite these facts, the iPhone 3GS is logged in to another carrier's network, indicated in the top left corner.
This is a big problem, when I'm using my iPhone in another country. Roaming Costs are high!
A quick search in the www indicateds, that I'm not the only one with this problem. As it can cause high additional costs, this problem should be fixed as soon as possible.

honestly i don't think its a apple iphone direct issue. here's what i know...i have had a no service on my 3gs randomly coming up on my phone for nearly a year now. i have done everything you've stated and still the same. i recently just went to australia and used a telstra sim card and it worked flawlessly for 2 months. i believe that bell and telus have changed their signal or something that is causing this but they will deny it to the bitter end. so...why not just buy another iphone? Exactly! thats what they want you to do! It's just a ploy to get you to buy another phone. if you can get another carrier besides these 2 crooks i think you will find it works. try buying a cheap prepaid sim card to see which carrier works best in your area before selecting a plan.

Delete operation is not working to delete selected row from ADF table

Hi All,
We are working on jdev 11.1.1.5.3. We have one ADF table as shown below. My requirement is to delete a selected row from table, but it is deleting the first row only.
<af:table value="#{bindings.EventCalendarVO.collectionModel}" var="row"
rows="#{bindings.EventCalendarVO.rangeSize}"
emptyText="#{bindings.EventCalendarVO.viewable ? applcoreBundle.TABLE_EMPTY_TEXT_NO_ROWS_YET : applcoreBundle.TABLE_EMPTY_TEXT_ACCESS_DENIED}"
fetchSize="#{bindings.EventCalendarVO.rangeSize}"
rowBandingInterval="0"
selectedRowKeys="#{bindings.EventCalendarVO.collectionModel.selectedRow}"
selectionListener="#{bindings.EventCalendarVO.collectionModel.makeCurrent}"
rowSelection="single" id="t2" partialTriggers="::ctb1 ::ctb3"
>
To perform delete operation i have one delete button.
<af:commandToolbarButton
text="Delete"
disabled="#{!bindings.Delete.enabled}"
id="ctb3" accessKey="d"
actionListener="#{AddNewEventBean. *deleteCurrentRow* }"/>
As normal delete operation is not working i am using programatic approach from bean method. This approach works with jdev 11.1.1.5.0 but fails on ver 11.1.1.5.3
public void deleteCurrentRow (ActionEvent actionEvent) *{* DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcItteratorBindings =
bindings.findIteratorBinding("EventCalendarVOIterator");
// Get an object representing the table and what may be selected within it
ViewObject eventCalVO = dcItteratorBindings.getViewObject();
// Remove selected row
eventCalVO.removeCurrentRow();
it is removing first row from table still. Main problem is not giving the selected row as current row. Any one point out where is the mistake?
We have tried the below code as well in deleteCurrentRow() method
RowKeySet rowKeySet = (RowKeySet)this.getT1().getSelectedRowKeys();
CollectionModel cm = (CollectionModel)this.getT1().ggetValue();
for (Object facesTreeRowKey : rowKeySet) {
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData();
rowData.getRow().remove();
The same behavior still.
Thanks in advance.
Rechin
Edited by: 900997 on Mar 7, 2012 3:56 AM
Edited by: 900997 on Mar 7, 2012 4:01 AM
Edited by: 900997 on Mar 7, 2012 4:03 AM

JDev 11.1.1.5.3 sounds like you are using oracle apps as this not a normal jdev version.
as it works in 11.1.1.5.0 you probably hit a bug which you should file with support.oracle.com...
Somehow you get the first row instead of the current row (i guess). You should debug your code and make sure you get the current selected row in your bean code and not the first row.
This might be a problem with the bean scope too. Do you have the button (or table) inside a region? Wich scope does the bean have?
Anyway you can try to remove the iterator row you get
public void deleteCurrentRow (ActionEvent actionEvent) { DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcItteratorBindings =
bindings.findIteratorBinding("EventCalendarVOIterator");
dcItteratorBindings.removeCurrentRow();Timo

Multiple selection in Query Panel. Operator Does not equal generates error.

Hi,
I'm using Jdeveloper 11.1.1.4 and creating Oracle Fusion Web Application with ADF Business Components.
I want to use multiple selection on LOV in ADF Query Panel with Table, but I get the following error
when I use operator "Does not equal":
Error: Unsupported model type.
SelectMany does not support a model of type class java.lang.Integer.
A simple example:
Schema: HR
Generate default Business Components for tables Departments and Employees.
Model:
Create List of Values for EmployeesView(DepartmentId)
List Data Source: DepartmentsView1
List Attribute: DepartmentId
Display Attributes: DepartmentName (UI Hints)
Create View Criteria EmployeesByDepartmentVC for EmployeesView
Criteria Item:
Attribute: DepartmentId
Operator: Equals
Operand: Literal
Select "Support Multiple Value Selection" (UI Hints)
ViewController:
Create blank JSF Page: showEmployees.jspx
Drag EmployeesByDepartmentVC from Data Controls to showEmployees.jspx
Create Query=>ADF Query Panel with Table
Run application.
Press Advanced button.
Select operator "Does not equal" and department names "Administration;Marketing"
Press Search
Error: Unsupported model type.
SelectMany does not support a model of type class java.lang.Integer.
Note: it works fine with operator "Equals"
Best,
Kees.

Hi,
I was reading:
http://www.oracle.com/technetwork/developer-tools/jdev/jdev-11gr2-nf-404365.html#bugs_fixed_in_11.1.2.2.0
Bugs Fixed in 11.1.2.2.0
Bug.No. 13508184
unsupported model type error thrown for multi select view criteria
I have tested the use case described in this thread with JDeveloper 11.1.2.2.0 but I still get the same error.
when I use operator "Does not equal":
Error: Unsupported model type.
SelectMany does not support a model of type class java.lang.Integer.
Is there anybody who can tell me more about this bug fix?
Thanks,
Kees.

I am really pisssed off at two characteristics of Firefox 4: Size and position do not stick, and view menu selections do not stick from one use to the next.

I am really pissed off at two characteristics of Firefox 4: 1) Toolbar selections don't stick and 2) firefox window position and size settings do not stick from one use to the next.
The Bookmarks toolbar is the selection that does not stick, and Firefox, even though I set it to the size and position I want every time I use the program, always loads flush left, full top to botton, and about 1/3 of the width of the screen EVERY TIME it loads. These two characteristics are extreme pains in the ass.

This problem occurs on the Juno webmail site?
I assume you are doing something different than just correcting the squiggly red underlined words. How are you spell-checking the email: using an add-on or using a feature of the Juno webmail site? If it's an add-on, which one is it?

I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error.

I upgraded to yosemite and iOS 8 in order to record with quicktime. But when I select Record a new movies I immediately get an Operation Could not be completed error. When I choose record audio or screenshots, I get a little further, but as soon as I select my ipad as the source I get the same error message.

You don't need to be a developer for this to work. I get the same error. Just one more thing on the list that make me upset more and more with Apple. Things just don't work out of the box like they used to.
This new feature was to be included with iOS 8 and Yosemite.

Vodadfone India 3G is not working on my iphone 5S. Tried manual network selection as suggest by others. still it is not working. any help is greatly appreciated

Vodadfone India 3G is not working on my iphone 5S. Tried manual network selection as suggest by others. still it is not working. Any help is greatly appreciated

Hello Tony Lobo
Try out the article below for issues with connecting to cellular on your iPhone.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS2755
Resolution
Follow these steps for help troubleshooting cellular data issues on your iPhone. After performing each step, please test to see if the issue is resolved.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Make sure that your software is up to date:
Check for a Carrier Settings Update: Tap Settings > General > About.
Check for an iOS Software Update: Tap Settings > General > Software Update.
Note: Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still doesn't, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare to troubleshoot further.
Regards,
-Norm G.

MAX settings do not stick

Hi - I'm trying to use FTDI drivers to simulate a COM port from an USB connection. Most WinXP SP2 or 3 machines have no problem, but I have one machine where having run MAX to ensure correct port operation, on quit and relaunch MAX shows a port conflict. This can be cleared with the available controls, but recurs the next time MAX is started. The settings do not stick. The subsystem (a TTi QL355TP power supply) does not see the communication either on this machine, and is OK on the others.
Environment: LV 8.2.1, MAX 4.1 or 4.2.1 . Would prefer not to upgrade LV to more recent version at this stage. LV 8.2.1 re-installed.
Any help or nudges much appreciated.

Thanks for reply. I can't obtain a screenshot at the moment, but the MAX display is a standard diagnostic I've seen on other occasions. Select a COM port in 'Configuration', and the "Port Settings' tab at the bottom has 'Conflict' added. The screen area above shows two columns of 'Settings', one from MS Windows, the other from MAX. These columns disagree in (for example) speed or flow control. Pressing 'Validate' aligns the two, 'conflict' disappears, 'Save' at top of screen appears to save correctly, and everything's fine. Except that the application this setting relies on still has a communication problem, and if you restart MAX the screen display resets to how I described above!
Re-install or repair of NI software does not fix it, nor does re-install of USB drivers. A corrupt data file on this machine would fit the observed evidence - are you able to point me to all the files that MAX may write? A corrupt MS Windows Registry entry might do it also, I guess. Do you know of any tools for checking or fixing such problems? The problem was triggered by a clumsy cleanup of installed NI software that was aborted partway through. The system is installed with a customer making a clean install of everything difficult and we are right at the point of having to write an unattractive workaround that uses a lower level serial interface to allow us to use NI Spy to eke out the required functionality.
Any help appreciated.

Changes made in Book Module do not "stick" when the book has been duplicated

Lr 5.2 stand-alone version (not CC) – Win 7 64-bit
I had made a duplicate of the book (right-click the book Collection and select <Duplicate>). Then I made changes to the original book – changed the font for captions and for body; changed the wording of the body text; changed the padding for images. At some point in the process these changes did not '”stick” anymore. The changes were visible as long as I worked in the Book Module. But the changes were gone and the book reverted to the previous state as soon as I went to the Library and back to the Book Module. Same thing happened when I closed Lr and re-opened it.
Replacing the Preference File did not change this behavior. But when I deleted the duplicate book the behavior of Lr went back to “normal”, i.e. the changes now “stick”.
In my opinion there must be a bug that prevents that changes “stick” when after a Duplicate of a book has been created.

You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
Do you have the latest patches?
When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
Good luck!

Manual operator selection not sticking

Similar Messages

Maybe you are looking for