Manual  triggering of notification's mail  in SOST

Hi ,
  In standard notification type (M1) ACTION BOX " Send confirmation of Receipt", i executed the Email with user's mail id. Mail was generated.But its waiting for long time in SOST(send request) and i need to manually trigger it in SOST to send it users. Usually, mail would be sent to user without the manual triggering in SOST. But its not happening in my case. I think, some settings to be done for it.
Can you please let me know how to sort out this issue.
Thanks in Advance.

Hi
Check out these notes
[208271|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=208271]
[172403|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=172403]
[189661|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=189661]
[798476|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=798476]
i dont think.. its gonna solve the issue... but.. check out , if u find it helpful...
- Pithan
Edited by: Pithan Pithan on Apr 28, 2009 3:35 PM

Similar Messages

  • Manually turned off notifications for Mail & Facetime, now  can not re-activate

    I originally worked with Bob Seufert to solve a No incoming Email Alert that was a result of my 'Fat fingering' the the 'Do not Disturb' icon while closing the Control Center.  We worked out that all incoming mail provided both the preset email alert plus a badge when my iPad was in Standby mode (not in use).  Now after activating the Do Not Disturb icon to not alert me of email or Facetime during night hours, I used the Do Not Disturb icon in the Control Center  to r-enotify me of incoming mail and Facetime by Sund Alrert. But as the day wore on , I found that the ntification was not working.  I have gone through all the stes Bob had recommended to make sure nothing had changed and performed a reset. 
    Would someone else have an idea what I may have pushed incore=rectly?

    Bob, As usual, you came to my rescue again.  Now your weekend will be free of me not bothering you.
    I will investigate the Table of Content in the IOS 7 book's Table of Contents.  I felt the My iPad book was a good reference book for beginners, but I am finding it is not a guide for troubleshooting or explaining certain features such as PUSH, etc, the definition of the characters in the Control Center You said that I can set those features for my email accounts.  In Settings>Mail,Contacts,Calendars>Fetch New Data, the email Accounts are listed with PUSH, FETCH or MANUAL.  IF the email account is already set to PUSH, you can only change it to FETCH , MANUAL or PUSH, but if email account is set to FETCH, The only options available are FETCH and MANUAL.  I do not not know of any other location where I can set those options and I know it is not an option when setting up a new account.  I was looking for the set up steps in the IOS 7 and My iPad book

  • Issue with not getting mail in sost for the PR Approvers

    Hi all,
    I have the following requirement
    Currently, requisitioner receives workflow email notification each time the PR has been released. If a PR has 3 approvers, the requisitioner receives 3 identical emails. The problem is that from the email alone, the requisitioner does not know if the PR has been fully released or not. After the first email, requisitioner may try to create the PO when in fact the PR is not fully approved yet.
    The case here is when the requisition is created, the mail is sent to first approver to release the requisition and when the first approver releases, mail is sent to next approver and so till all the approvers approve, finally after all the approvals it is sent to requisitioner.
    For this I have created an activity GET PR status where i am checking the condition based on release indicator.
    When the release indicator is '2' then the final notification is sent to the requisitioner.
    The process is working fine in dev system. When there are three approvers and all the approvers have same mail Id when i create the requisition and release manually in me55, I am able to see the mail in sost. This is actually done after running the batch program. But when the approvers have different mail Id's im able to see in swia but not in sost.
    Any help is appreciated.
    Thanks

    Hi rick,
    My bad, I have assessed the issue differently.
    Yes im sending a single mail to the requisitioner after all the approvals.
    But the issue here is after the requisition is created, the first mail is going to the first approver. When the approver releases, the mail that has to go to next approver is shown in swia.
    Now when i run the batch job, it has to appear in sost. But, it is not.
    The whole process actually working fine in DEV system but in QAS, it is not.
    Is is showing the following message when i manually release the order and tested
    Status
    StatusText
    Cannot process message; no node determined for [email protected]

  • Not getting notification e-mail in case of time based publication

    Hi,
    We are working with subscription service.
    We have one document subscribed by some users.
    Users are getting notification mail whenever there is any modification in that particular document.
    But when I am setting the lifetime property of the document.
    Users are not getting notification e-mail when that document get published or get expired.
    We checked in the Subscription Service.In the Allowed Admin Notification field we have to mention the proper event.
    But we don't know which event name to mention.
    It will be very helpful if any one let me know about it.
    We are using EP 7.0.
    Regards,
    Biswarup

    Hi Biswarup,
    From the official documentation http://help.sap.com/saphelp_nw04s/helpdata/en/e8/a9a76828b8dc469969ff450ec81ced/content.htm this definitely should work out of the box.
    Anyhow, what kind of subscription do you have chosen, immediate subscription or regular (daily, weekly, ...)?! If you are talking about an immediate subscription, try to alter this to a regular subscription. <i>Maybe</i> the change event which triggeres immediate subscriptions isn't thrown correctly by the TBP.
    But even in this case, please open an OSS message, as this should be considered as a bug (or at least as a lack of documentation on help.sap.com).
    Hope it helps
    Detlev

  • Getting job name to notification e-mail when monitoring runtime limits

    Hello,
    In CPS version M33.49-55614 the requirement is to notify users via e-mail when a certain job exceedes the defined maximum runtime limit.
    We have defined the limit in "Runtime Limits" tab of Job definition and have defined an event to be raised in the same tab.
    The event is used as an Wait event for a Job chain consisting of 1 step only with System_Mail_Send. The mail Subject text is using an expression '=waitEvents.<event_name>.raiserComment'.
    After this we are receiving notification e-mails with Subject: Maximum Runtime Limit breached. Raising an event for job 1460806.
    But the Job name is not passed through the '=waitEvents.<event_name>.raiserComment' expression.
    We use the same scenario for notification e-mails for Error or Killed jobs, and in these cases the same expression '=waitEvents.<event_name>.raiserComment' results to notification e-mail subject: Event raised by Job:1460826 (JOBNAME) going to status Killed.
    The question is how to get the JOBNAME also to e-mail notification for exceeded maximum runtime?
    2 attempts did not help:
    - Add the $ substitution variable to Event Raise comment
    - use =waitEvents.<event_name>.raiserJobName in notification mail Subject
    Thanks and Regards,
    Ernest Liczki

    Hi Biswarup,
    From the official documentation http://help.sap.com/saphelp_nw04s/helpdata/en/e8/a9a76828b8dc469969ff450ec81ced/content.htm this definitely should work out of the box.
    Anyhow, what kind of subscription do you have chosen, immediate subscription or regular (daily, weekly, ...)?! If you are talking about an immediate subscription, try to alter this to a regular subscription. <i>Maybe</i> the change event which triggeres immediate subscriptions isn't thrown correctly by the TBP.
    But even in this case, please open an OSS message, as this should be considered as a bug (or at least as a lack of documentation on help.sap.com).
    Hope it helps
    Detlev

  • Central contract notification e-mail

    Hello experts,
    I'm trying to implement the e-mail notification when an SRM central contract is getting closer to the date when it will expire.
    I've setup the Define Event Schema with all four options available there:
    1. EXTERNAL
    2. NOTIFIC
    3. OUTPUT
    4. TASK
    After this I've run the program BBP_CONTRACT_CHECK and the output of this program is:
    Contract
    Message
    Message type
    4600000004
    Contract expires in 8 days
    EXTERNAL
    4600000004
    Contract expires in 8 days
    NOTIFIC
    4600000004
    Contract expires in 8 days
    NOTIFIC
    4600000004
    Contract expires in 8 days
    OUTPUT
    4600000004
    Contract expires in 8 days
    TASK
    My problem now is that there is no e-mail in SOST and nothing get sent to any of the users.
    I've checked the users and they all have the e-mail address maintained both in BP and in SU01.
    I think I'm missing one configuration step on this one.
    What do you think?
    Cata

    We upgraded to a different build, and now this problem is fixed!

  • Binding at Manual triggering of workflow.

    Hi,
    As per requirement I triggered workflow manually from an userexit. That workflow is basically to trigger mails for every personnel action at PA40. Now the container at function module 'EWW_WORKFLOW_START'(Used for manual triggering) is filled with personnel number (pernr), but how can I bind this value in workflow.
    If anybody experienced in this. Please kindly guide me asap.
    Thanks in advance.

    Check the below snippet
    DEFINE SWC_SET_ELEMENT.
      CALL FUNCTION 'SWC_ELEMENT_SET'
        EXPORTING
          ELEMENT   = &2
          FIELD     = &3
        TABLES
          CONTAINER = &1
        EXCEPTIONS
          OTHERS    = 1.
    END-OF-DEFINITION.
    IT_CONTAINER TYPE TABLE OF SWCONT
    IF data IS NOT INITIAL.
          value3 = data->value.
          value1 = value3 / 2.
          value2 = value3 / 2.
        ENDIF.
    * Set the data into Workflow container
        SWC_SET_ELEMENT IT_CONTAINER 'basic' value1.
        SWC_SET_ELEMENT IT_CONTAINER 'hra' value2.
    * Start the Workflow
        CALL FUNCTION 'EWW_WORKFLOW_START'
          EXPORTING
            X_TASK          = 'WS99900280'
          IMPORTING
            Y_WORKFLOW_ID   = WF_ID
          TABLES
            X_CONTAINER     = IT_CONTAINER
          EXCEPTIONS
            INVALID_TASK    = 1
            NO_ACTIVE_PLVAR = 2
            START_FAILED    = 3
            GENERAL_ERROR   = 4
            OTHERS          = 5.
        IF SY-SUBRC = 0.
          COMMIT WORK.
        ELSE.
          V_MESSAGE = 'Work Flow not triggered'.
        ENDIF.
    here Iam passing BASIC and HRA from my exit. Make sure that you should declare with the same names even in the workflow container.

  • When opening my Outlook 2010 with new added e-mail account with Exchange Server, I have to click manually on my standard e-mail account for checking mail

    When opening my Outlook 2010 with new added e-mail account with Exchange Server supplied by my employer, I have to click manually on my standard e-mail account for checking mail. Do I have to upgrade my Microsoft Office 2010 or how can I make my Outlook
    2010 check all my four e-mail accounts without manually click on my accounts?
    Sincerely
    Ketil Hothorp

    Hello Ketil,
    Good Day...
    Seems to be the Issue is Syncing emails, now I would recommend you to Remove and Add the Account and try and check if the emails are getting synced automatically.
    Hope this is with Single User. If it is with Multiple Users then we need to check the permissions assigned.
    Regards,
    Praveen

  • Mountain Lion: on the Notification Center notification and Mail:  how to limit notifications to an email account?

    Mountain Lion: on the Notification Center notification and Mail:
    how to limit notifications to an email account?
    At least, is it possible to choose what email account, the arrival of a message launch a notification.
    When running more than a dozen e-mail accounts, it may be appropriate to display only the notifications of one or two major accounts.

    Which os are you using?  Which Mail version are you using? 

  • TS2621 I have my data retrieval se to manual. When I get mail I get a popup on the screen for each and every e-mail asking if I want to view it or cancel and I have to cancel each one before I can resume any other actions on my ipad. How can I turn this o

    I have my mail set to retrieve data manually. When I retrieve mail, I get a popup box for each and every e-mail message asking if I want to view or cancel and must either view or cancel each one before I can use other apps on the ipad. How can I turn these popups off?

    Try reset iPad (not Restore)
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • Notifications from Mail not working in iCal

    Notifications from Mail are not working. I have set the proper setting in both iCal and Mail with no luck. .ICS files show up in Mail when I search but they don't populate of show in the Notifications window in iCal.

    The same problem here. It used to work for a while. But after the last update it stopped working.
    if I get an e-mail reply to an event, it does not update the attendee list.
    i figured out though, that if you drag the .ics file onto iCal window (events part), the attendee status is updated and event is marked as done, but there is still a question mark in the upper part of the event.
    obviously a bug.

  • No attachment is included in the Mail from SOST

    Hi SAPer,
    Please could any of you help me out on this issue
    We are on 4.6C. AP payment advice by means of BTE create an outbound email in SOST with payment advice to the correct mail addrsess and I can see the preview image of attachment within SOST.
    The problem is that the auto-mail from SOST into my account does not have any attachment nor content at all.
    Please advise me on what setting may cause this issue in SAP.
    Thanks in advance
    Kind regards
    Taro

    Hello Taro,
    What type of attachment is that like .pdf or .xls ? and what is the size of the file ?
    Refer to below notes please
    785564 - Device types for SAPconnect
    Note 762870 - Language-dependent selection of device type
    Note 488810 - Determining the device type for a certain language
    1171138 - Size restriction for outbound e-mails
    837300 - Size restriction when sending documents
    Regards,
    Arjun

  • How do i change my notification e-mail

    Hello,
    How do I change my notification e-mail address without changing my apple id?
    I want my notification e-mail address to be my me.com address.
    Thanks a lot and best regards.

    Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
    Create a new email address, for example  at Yahoo or Gmail, or anywhere convenient (or you can use an existing address as long as it has never been associated with an Apple ID).
    Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
    Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
    Enter your new address and click 'Save changes'.
    Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
    Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in.
    I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

  • Is there a read notification in mail for Mac OS X Lion

    Is there a read notification in mail for Mac OS X Lion?

    You could try this, I guess:
    http://email.about.com/od/macosxmailtips/qt/et_request_recp.htm
    or this
    http://hints.macworld.com/article.php?story=20050512155856402
    I don't know if they work.
    charlie

  • Can the form attachment files be included in the notification e-mail?

    Can the form attachment files be included in the notification e-mail?
    Best regards

    Hi,
    Currently the attachment cannot be sent with email notifications in FormsCentral. You may submit feature request via http://forums.adobe.com/docs/DOC-4233.
    Thanks,
    Wenlan

Maybe you are looking for