Manually install system voices

I'm a language enthusiast, and love experimenting with the text to speech functions in OS X. I've got a Mini that has all of the system voices downloaded (yes, all 21GB of them), and that process took several days of going back and manually telling it to download more, since my connection didn't take kindly to so much being downloaded all at once.
I now have a Retina MBP as well, and I'd like to not have to put up with all of that hassle. I've copied all of the files out of /System/Library/Speech/Voices on the Mini and put them in the corresponding folder on the MBP, but in spite of that it still says that it has to download the voice to install it, even after a restart. Is there something I can do to force it to recognize the files in the folder?

by the way, i used command ORADIM -NEW -SID xxx -INTPWD xxx to create the new instance
and i did not use oracle assistant to create the new database, instead, I used command CREATE DATABASE xxx LOGFILE xxx CONTROLFILE xxxx.....
also i did set the ORACLE_SID to new SID.....

Similar Messages

Manual Uninstallation of System Voices in Tiger

I have found a third-party solution for Macintosh Text-to-Speech that provides voices better than those of Apple and in more languages (German, French, Spanish, UK English, US English, etc.) For those who are interested, it is most efficient to just give the compay website (www.cepstral.com) and then everything will become clear. Please note that I have nothing to do with the company, I just use the software.
The presence of the better third-party voices means that I longer need the original, Apple-provided voices which Tiger insists on installing (Agnes, Zarvox, Trinoids, Bad News, etc.) Now they just take up space. Previous versions of Mac OSX allowed you to leave out at least some of these voices. I have checked with Apple, and they confirm that it is no longer possible to tell Tiger not to install these voices. So, does anyone know how to manually delete the files that hold the Apple voices, while leaving the rest of Apple's Speech System intact? Thank you.
iBook G4 Mac OS X (10.4.3)

Thank you! The issue has been resolved. I followed the path you provided and destroyed only the folders that contained the voices themselves, leaving intact the essential synthesizer folder, recognizer folder, etc. The voices themselves took up more space than you estimated -- a total of 41.8 MB!

Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

Hi Community,
I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment, we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
VMware machine running Windows Server 2008R2.
The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
Configuration
Supported?
Agent-less monitoring
No
After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
but it didn't matter how many times I try the servers never show up.
I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
--> http://technet.microsoft.com/en-us/library/hh212853.aspx
I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
I went to the Event Viewer and I found one particular event that caught my attention, see below :
Log Name:      Operations Manager
Source:        Health Service Modules
Date:          6/12/2014 12:48:19 PM
Event ID:      11551
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MyManagementServer
Description:
Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Health Service Modules" />
    <EventID Qualifiers="49152">11551</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
    <EventRecordID>1945680</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>MyManagementServer</Computer>
    <Security />
</System>
<EventData>
    <Data>MyManagementServe</Data>
    <Data>0x800706BA</Data>
    <Data>The RPC server is unavailable.</Data>
</EventData>
</Event>
Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
My main goal is to have all the servers showing up in the Operations Manager Console.
So thanks all in advance !
Oscar Loria

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Tom voice downloaded but not showing up in system voices

hello all, i recnetly restored my mac back to os x mountain lion from a backup, when i download the tom voice it gets installed but doesnt show up in the system voice box, how do i fix this?

Manually installing FP 11.7 on Mac OS 10.6.8-uninstall old?

I know the option exists to use the built in updater in system preferences.
But in cases you have multiple macs to update, it's sometimes easier to just download the updater, put it onto a thumb drive, and then manually install in each mac. My question is this:
Do I need to first untinstall the previous version via the uninstaller app in the utilities folder before installing the new version? Or can I just run the new installer without deleting the old one. NOTE: the "old" one in this case is usually just the previous version of Flash Player released.

Usually the installer should automatically uninstall any previous versions. However there are sometimes circumstances where the old player does not get fully uninstalled. But I would still try using the installer alone.
Use this installer if you run multiple installations http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
There is also a downloadable uninstaller at http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html

Can not download any extra system voice.

I can not download any other system voice to my MacBook Pro.
The error message is "The voice "Jill" can’t be installed now because you are not connected to the Internet.". Anyway, the internet connection do really work correctly on my Mac.

Just down the page I found this maybe try what they say:
https://discussions.apple.com/message/18836731#18836731

Is is possible to install System Center 2012 R2 products using SQL aliases names

Hello,
Is there a way to install System Center 2012 R2 using SQL aliases, and if applicable, which System Center products support this scenario ?
I have it as an acceptance criteria, but I'm not able to make it work.

So, I would like to hear from a voice of someone who have tried this, and can confirm if it is applicable or not.
ok, I have to ask the stupid question but.... What is wrong with your voice?? The setup tells you it is not supported what more do you want?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Is it possible to manually install bonjour service?

I have a new system and an older iPod Touch. I've been trying to install the latest version of iTunes, but I keep getting an error: "Service 'Bonjour Service' (Bonjour Service) could not be installed. Verify that you have sufficient privileges to install system services."
I have been trying to install the app using an Administrator's account on Windows 7 Pro 64-bit so I should have sufficient privileges. There's only one article on Bonjour Service being prevented from running, and it refers to a McAfee firewall problem. I'm running Trend Micro, so it's of no help.
Given that information, is there a way to manually install the Bonjour Service so that I can actually get the latest version of iTunes installed on my system?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Bonjour, won't install normally.
As given try temporarily disabling your antivirus software during the install.
tt2

Can I manuall install latest SCDPM agent?

If I manually install the 2012 Data Protection Agent from the
C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\ProtectionAgents\RA\4.2.1205.0
directory, I then have to run an update to get to version 4.2.1254.0. Is there any way to do a manual install of the latest agent without having to update later?

Hi,
Yes, you can install the latest UR agent from under the C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\agents\RA\4.2.1254.0\amd64\1033
Execute the DPMAgentInstaller_KB2966014_AMD64.exe
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Manually Install Froyo 2.2 on Droid Incredible

Hello all!
Didn't get your update OTA yet? Do it yourself!
How to Manually Install Android 2.2 Froyo On Your Verizon Droid Incredible
I just did it and it was easy! Enjoy
Nick

tr1kst4nce wrote:
Ok... so for those few on this thread who have installed it... I have a couple of newbie questions.
1. How do you know you have the 2.2 update? The only thing I can think of is to go into the camera and check for the 720p thing.
Go to menu -> settings -> about phone -> software // That'll give you the version
2. What all did you get on the update? Hotspot? 720p HD video capability? What? Anything else?
Pretty icons, city ID that never stops, Skype mobile whether you want it or not, the ability to rotate the screen to the right now instead of just the left. Seriously, not a lot. Definitely nothing for people to ose sleep over. *edit** I forgot one important thing - I hear that it also enables bluetooth voice dialing. I haven't tried it yet. If this is true, then I would say that the update gets a definite +1. This is a feature that, even though I rarely need it, should be standard on every phone in existence.
3. What exactly is the "root" folder it talks about when doing it manually? And is it safe to do it this way? Especially off of some site.
The root of the SDcard just means to put the downloaded file on your sd card, but NOT in a folder. Just drop it on there, all by it's lonesome. It has nothing to do with "rooting" your phone, in case you were curious. That's an entirely different animal.
Hope that helps a bit! Enjoy.
Sorry for the newbie questions. Your help is appreciated.

Manually Install Patch Agent??

We recently purchased Zenworks Patch Management. However, right before
purchasing ZCM Patch Mgmt, we upgraded to ZCM 11. The ZCM 11 Agent
components for patch management automatically installed to ZCM 11 clients,
but not to version 10 clients. My guess is that it might have something to
do with the fact that the MSIs for 10.3.1 are now renamed as "superceded"
MSIs.
I had a friend build me an "unconfigured" ZCM agent package from his 10.3.1
system (he has ZCM Patch Management), and that successfully installs on a
freshly imaged machine and Zenworks Patch Management seems to be working.
However, that doesn't help me with the rest of my 10.3.1 machines that I
don't wish to reimage right now.
If you're asking: Why don't I upgrade my clients to the ZCM 11 Agent? I'll
tell you my answer: IT'S WAY TOO SLOW!! Until they iron out a few issues,
we're going to hang with the 10.3.1 agent.
So, my question is: Is there anyway to take the MSIs that are renamed as
"superceded" and manually install them to a workstation to get ZCM Patch
Management working on my existing 10.3.1 clients? I tried to simply install
the MSIs, but it doesn't seem to show up as an installed option on the ZCM
Agent properties page.
Thanks in advance!

Ryan,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Issue installing System Update 5.01

Hello all I am having an issue installing System update 5.01. I looked in the logs within the temp directory and it says error 1602 which is user canceled. However, I am not canceling the install. I also tried http://support.microsoft.com/mats/Program_Install_and_Uninstall that didn't work either.
I'm on a T420 with Windows 7 64bit.
Any ideas?
Thanks for your time

I had similar issues installing 5.01. I believe there is something wrong with the package. Here is how I fixed it:
Download installer from http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
Extract package with 7zip
Copy "Lenovo System Update.msi" to "System Update.msi"
Run setup.exe
For some reason the installer was looking for this file and it wasn't there, perhaps running the installer in silent/unattended mode caused it to exit with the code you mentioned.
I hope this fixes your problem too!

How to install System 7.5.3 on iMac G3

I have an iMac G3 that currently is running Mac OS 9.2. I managed to scrounge up a copy of System 7.5.3 online (it was 19 parts to download). When i opened the installer to install System 7 on my iMac, it showed an alert saying,
"The system software 7.5.3 installer script does not recognize this macintosh. Please use the original disks that came with your computer. The installer cannot update the version of Macintosh System Software on the disk named "^0". Please remove the system."
I have no idea what to do. I do have the original restore disks for my iMac though. Please help me out with this one.

You cannot use 7.53 to start up an iMac G3, as it doesn't contain the resources necessary to start up an iMac. If you need to create a bootable disk for a computer which can start up from 7.53, download and install MachID Wannabe on your machine, restart, and then set the machine ID to 75. Install an universal system on the external drive(this option is available under Custom Install), and then reopen MachID Wannabe and reset your computer's ID. This disk cannot be used to start up your iMac; it will only start up systems which can run 7.53 without an emulator.
(10317)

TS1702 i can't open all apps that i manually installed. when i try to open one, it asks me to log in to my apple account and when i do it, it says that my apple id or password is incorrect. does anyone can help me to fix this problem?

i upgrade my 3gs to os 6.1 but starting then all my manually installed apps does work and every time I open them, it asks me to log in to my apple account but responds that my password is incorrect. I tried to change my password but i never received the confirmation email. Does anyone know how to fix this?

Hi,
iChat (it would help to know which version) can accept Apple IDs as valid AIM Screen Names.
However if you have iChat 5 or earlier you cannot use ones ending in @me.com or @icloud.com issued by iCloud. (they can be used in iChat 6 or Messages as these versions make a double login to AIM and Apple to allow the use of the password).
In addition if you are using an Apple ID for an AIM Screen Name the password still needs to keep to the 16 character limit that AIM has.
AN @mac.com name can be used on any version of iChat (Until the 30th June 2014)
As it does not need a double check with Apple you can use it to log in to the AIM Web pages
Login here with an AIM Name registered at AIM or and @mac.com name and see if you get any suspended account messages.
Sometimes account can be suspended. Usually because something has triggered the "Unusual Activity" item.
About a year ago many @mac.com users that travelled out of their own country found themselves suspended when they got home.
If the Name checks out of if an Apple ID the password in known to be 16 characters or Less then do this:-
In Lion upwards open a Finder Window and use the Go Menu whilst holding down the ALT key.
Select the Library that appears in the menu list.
Navigate to Preferences.
(If you have version earlier than Lion the just navigate to ~/Library/Preferences (that's the Library in you Home - Little House icon - folder)
Fnd com.apple.ichat.aim.plist (even if you are using Messages)
Drag the file to the Trash and Restart the app.
7:39 pm Thursday; May 29, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How can I do a manual install of ACR 7.4 in 64-bit Win 7 PSE 11?

I found detailed instructions on this forum that I think were for 32-bit Win 7 but I'm hoping 64-bit install is different since I followed them and still no success. I know that 8.1 is supposed to be able to be manually installed and that would be ok too but I really only need to go from 7.1 to 7.4 and the update function is greyed out. I started with a trial version on that machine so maybe that has something to do with it? It is registered and activated. Tried to uninstall/re-install and still no luck(didn't check the "de-activate" though so maybe I need to try again and choose this?
Not afraid to try a manual install if it is in fact different.
This is the thread I followed - http://forums.adobe.com/thread/1266134
I have the PSE 11 on a Mac platform also and was able to update it no problem...can't get the Win 7 to work for the life of me.
Thanks for any responses.

Glad it worked.
There is one more thing you should install and those are the camera raw profiles for 8.1
Download the 8.1 DNG Converter and run the installer to install the camera raw profiles.
(those profiles would normally be installed if the updater in your pse 11 was working)
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5597

Manually install system voices

Similar Messages

Maybe you are looking for