Manufacturing plant as well as Subcontractor.

Hi,
This is regarding a repetitive manufacturing plant (Make to Stock) also used as a subcontractor for another company of the same client for same manufactured material.
Plant A of company code "1000" manufactures FG under repetitive scenario.
Plant B of Company code "2000" send the raw material to plant "A" company code "1000" to get the FG Material.
At Plant "A" company code "1000" , we need to track the raw material received from plant "B" of company code"2000" and the SFG & FG manufactured for the same (plant"B") apart from the same material manufactured  at plant "A" and the same raw material used in plant "A" . Please note that both the plant material codes are same.
The material received from plant"B" company code "2000" should not  have the accounting entry and SFG & FG should carry the operational cost.
Request your valuable suggestions.
Regards
Senthil / Murali

Dear,
I go through the link and hope this will too helpful for you.
Inter-plant subcontracting (processing)
Regards,
Syed Hussain.

Similar Messages

  • Excise Invoice Error in STO from Manufacturing to Manufacturing Plant

    Hi,
    This is a scenario of Intracompany (within a company) STO from one manufacturing to another manufacturing Plant. Steps involved are
    ME21N: STO Creation with doc type UB
    VL10B: Outbound Delivery
    VL02N: PGI (Mvt Type 641)
    VF01: Billing
    J1IIN: Excise Invoice
    MIGO: Goods Receipt in Receiving Plant
    The problem is while doing Goods Receipt (MIGO) wrf Outbound Delivery in Receiving Plant when we refer the Excise Invoice (created in J1IIN) we are getting an error message as u201CExcise Invoice 2000000033 31.05.2011 of Vendor 1300003 does not exist for Referenceu201D
    Customer and Vendor master for the plants as well as STO configuration seems to be complete but still we are getting this error message.
    Can anyone provide some idea how to resolve this?
    Thanks in advance

    Hi
    when we refer the Excise Invoice (created in J1IIN) we are getting an error message as u201CExcise Invoice 2000000033 31.05.2011 of Vendor 1300003 does not exist for Reference
    If I am not wrong in J1IIN ,you get two number ,one will be internal number try to capture with internal number
    Regards
    Kailas ugale

  • Return of Goods from Customer to a Manufacturing Plant

    Hi,
    This is a scenario of Return of Goods from Customer to a Manufacturing Plant and Excise Registers RG23A Part 1 and RG23A Part 2 need to be updated. As the material is finished goods so its material type in J1ID is RG1 in the manufacturing plant.
    Can any one provide some idea that what process should be followed so that Excise Registers RG23A Part 1 and RG23A Part 2 can be updated after taking it back from the customer?
    Thanks in advance

    Hi,
    The issue is only with RG23A Part 1 Register. The RG23A Part 2 is already getting updated through J1IH (with reference to the Return Delivery Document).
    After updating the RG23A Part 2 Register if we capture excise invoice without purchase order in J1IEX, it would update RG23A Part 1 as well as Part 2. So, RG23A Part 2 would be updated twice.
    If we don't use J1IH at all, then it can be possible to update RG23A Part 1 and Part 2 in J1IEX (without purchase order) but this transaction won't be linked to previous transaction(s) and everything needs to be entered manually.
    Can you please provide any alternate solution?
    Thanks in advance

  • Manufacturer plant Partner not defaulting in PO

    hi all
    according to SAP Help, the setting for checking manufacturer plants are supposed to be the following:
    1) Vendor with account group001 and partner roles LF
    2) Manufacturer with account group MNFR which, unless I am missing something,  allows partner role MN only(no connection to main vendor???) and manufacturer plants in partner tab, with partner role MN
    3) Manufacturer plant(s) with account group MNFR, partner role MN (manufacturer plant) to be entered in the Manufacturer partner tab (see point 2).
    the system is supposed to check the plants at PO creation but this is not happening: it does only if the vendor is also the manufacturer and i enter the plants directly in the vendor master.
    Also, assuming I am entering the manufacyturer in the partner roles of the vendor master, the manufacturer plants defined in the manufacturer master record, are not defaulted in the PO.
    all the settings in Custmizing are checked: schemes, asignments to PO etc.
    I also checked Notes but could not find something suitable....i might have missed something tho.
    any ideas?

    Open personal settings of TCD ME21N/22N/23N and select Display key in box. Save.
    Log out and log in again. and open PO.
    This is showing because, your personal settings are made to show description.
    Raghavan

  • Stock transfer from a Depot to a manufacturing plant

    Hi All
    I am doing a stock transfer from a Depot to a manufacturing plant.
    I have transfered the material from depot to plant and captured the excise
    in register RG23D using transaction J1IJ.Now a goods receipt in done in
    the receiving plant in refernce to the outbound delivery.
    Now the problem is when a excise is captured using transaction J1IEX in
    reference to a Goods Receipt and manually enter the details in the system , it gives me a
    short dump of BCD_Divide by Zero.
    Please advice

    Hi,
    Go to transaction ST22 it will give you a comprehensive analysis of the dump including the reason. Looks like there is erroneous data.
    Regards,
    Saurabh Diwakar

  • Excise duty for manufactur plant.

    Hi,
    we have only one plant. so deliveries are takes that plant only. In Excise configuration i treated it as a manufacturing plant ( not depo).
    But in the pricing procedure we have BED. I maintained it as 16%. So the value is coming in the sales order and billing. While doing the J111N the BED is not coming.
    Is it the reason i maintained as manufacture plant thats why this value is not coming?
    In this scenario what are registers to be updated? plz give suggestions on this .
    regards,
    v.s.vas

    Dear vas
    Just now you posted the same question with the subject "RG23D" and many friends are responding to you.  If your problem has not been solved, please explain your problem clearly. 
    Please dont post the same question with different header !!!!
    Thanks
    G. Lakshmipathi

  • Transfer of goods from Manufacturing Plant to Sales Depot plant

    Hi,
    The Client is having Manufacturing Plant and Depo Plant wherein the goods shall be transported to Depo with Exice Invoice and sold from there without any excise duty.
    As per SAP best practice, we have maintained the Price Control as 'S' in the Manufacturing Plant and 'V' at the Depo level.
    The Client requires that the valuation of Finished goods at the Depo level should be inclusive of the excise duty paid when the material is despatched from Manufacturing plant to Depo.
    How the excise duty paid amount can be loaded on to the material value and then sent to Depot?.
    Please offer your valuable suggestions on this issue.
    Cheers,

    Dear
    In manufacturing plant the stock transfer material's price control should be S and V for Depot material.
    And configure Excise duty as condition type in Stock transfer Purchase order, which will automatically change the moving average price.
    Prakash.

  • Transfer of Variance from Manufacturing plant to Sales plant in COPA

    Hi,
    In the current project there is requirment of COPA report where sales are done at Distribution centers/Depots (selling Plants)  whereas manufacturing is done at Manufacturing Plants. When the Variance is settled in Production order to COPA it is recorded only at Manufacturing Plant.
    Since sales happens at Selling Plants how to carry the variance cost in COPA to Selling Plants.
    Bye,
    Ramesh

    Hi,
       The variance is the amount that has accumalated at COGM, the price control of a material at manufacturing plant will be "S" - Standard whereas at selling plant will be at "V" - Moving average. And also at Manufacturing plant the cost of the product will be COGM, whereas at sale plant it will be at COGS.
       Kindly clarify the scenario, How many manufacturing plant and selling plant is there in your scenario. Say if there is only one manufacturing plant and there is 4 selling plant the how the variance has to be distributed.
       If it is based on quantity transfer, which kind of COPA is activated in your scenario, Costing based or account based
    Regards
    Kaarthik Devaraj

  • How to create requirement in the manufacturing plant

    when a sales depo is raising a sales order, when the stock is not present, the sales order has to create a requirement in the manufacturing plant
    does it affect if already stock is present the sale depo plant
    how do we this
    thanks

    Hi Rajan,
    To generate the req in Manu. Plant, depends on the setting you maintain in the MRP views of the Material.
    Yes, most of the time the settings are as such if there is available stock in the warehouse available then there is no demand populated in the manufacturing plant.
    Thanks
    Murtuza

  • Stock transfer between the two manufacturing plants

    Dear Experts,
       I am doing the stock transfer between the 2 excisable plants
      1.First we will transfer the Semi finished material from one manufacturing plant to another manufacturing plants.
      2.After receiving the material in the receiving plant, they will convert SFG to FG.
      3.FG material will transfer to another non excisable plant.
    Is we need to pay the excise 2 times (1st time as a SFG material, 2nd time as a FG material)
    What is the exact procedure for this scenario.
    Regards,
    Narendra

    Respected Lakshmipathiji,
    i was little confused here...
    """Coming to your query, you need to levy tax on the selling price / assessabale value when sending the FG to non-excisable plant""""
    Tax means are you talking about sales tax?
    when we transfer the Finished goods from manufacturing plant to Non-manufacturing plant---Will it attracts Sales tax?
    Please throw some light here sir..
    Note to Narendra: this will be completely depends on your client--currently at my client they will transfer semi finished/Finished goods from one plant to another as sales cycle(attracts only excise values)--once after receival of stock--the receiving plant will raise PO to supply plant followed by MIGO and MIRO--there by the same excise values will be settled in MIRO settings(user will enter excise values manually in MIGO/MIRO to match the origin of stock transfer sales invoice)( i was not completely aware why they do so--may be need to get more clarity from my MM counterpart)
    Phanikumar

  • Goods transfer from Depot to Manufacturing plant

    Hi Gurus
    Can some one explain me the the flow that will be involved in a scenario of goods imported and received at Depot (City 1). From depot it is transfered to a manufacturing plant (City 2). I want to be more clear about how and at what step the excise duties will be captured and when will J1ij come into picture.
    Regards,
    DDP

    First of all I need to correct what I have mentioned. J1IJ is used only in Depot. While replying I mistook City 1 for plant and City2 for Depot. However, all the other steps remain same.
    Whether excise transactions should be performed at Depot or not depends on whether Depot is having excise registration. If yes, it is mandatory to perform all the excise formalities as excise material is being stored. So when material comes in excise credit is taken and when material goes out excise debit has to take place. RG23D needs to be maintained at Depot.
    Regards,
    GSL.

  • Fetching the Manufacturing Plant for a Batch.

    Hi Everyone,
    Could y'all tell me How do I Fetch the Manufacturing Plant for a particular Batch. The Mfg.Plant has to be displayed in an alv report.
    Thanks and Regards,
    Neo

    hi Neo ,
    check tables MCHA/B/* .
    check MCHB not A.
    Regards
    Prabhu

  • Manufacturing Plant Vs Depot Plant

    Hi experts,
    Where we can define in spro the plant whether it is Manufacturing Plant or Depot Plant, acutully I have opned one depot plant, but it is behaving like manufacturing plant. I think I have missed something in spro.
    Kindly help me.
    Regards
    GR

    Dear friend
    The following settings are needed to to do
    1)     maintain the plant setting tab click as depot
    Spro-Logistic general-tax on goods movement-plant setting
    2)     maintain the Excise group
    In that also depot setting is there
    3) Maintain the series group for depots
    regards
    pramod

  • How to find original [manufacturing] plant of a batch

    Dear all
    Could you plaease help me to find link between original manufacturing plant & depot where product is laying currently.
    I'm using tables MCH1, MCHA & MCHB currently. But the column of Original plant is blank. Please find
    Is there any customisation available? I'm putting an example for reference. 1st table is MCH1 & 2ND is MCHB.
    Material     Batch     Created On     Created by     Last Change     SLED/BBD     Batch restr.     Date of Manuf.
    1000168     1614265     26.06.2009     M1PI     11.02.2011     26.06.2010     X     26.06.2009
    Material     Plant     Stor. Location     Batch     Created On     Created by     Restricted-Use
    1000168     F101     I003                           1614265     10.02.2011     SDMMSUP               1
    Please help.
    Nachiket Abhyankar

    dear friend,
    take your batch number and material document year and go to table MSEG
    put this data and set 101 into BWART field (your movement type). find the record in MSEG
    take the value from AUFNR field (the production order which is linked to your batch) and go to table AFPO
    put the prod.oder number and find the record.
    now your original manufacturing data as folows:
    AFPO-DWERK is your manufacturing plant
    AFPO-PWERK is your planning plant
    AFPO-LGORT is your storage location
    good luck!

  • Manufacturing Plant vs Other plant

    Hi all,
    Can any one tell me what are the different settings in SPRO to differentiate manufacturing plant and non manufacturing plant. In other words how to activate a plant for manufacturing?
    Thanks,
    Sayak

    Do you mean Warehouse is integrated with PP, if that is so then you need to  look for the setting

Maybe you are looking for