Many messages are showing up randomly on my mail.they say no message and no sender and give very strange dates. The text is gray - I can't delete them. What is this?
Many messages are showing up randomly on my mail. They say no message, no sender and have strange dates. The text is gray; I cannot delete them. What is this?
The Best Alternatives for Security Questions and Rescue Mail
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contacting Apple for
support and service.
c. Rescue email address and how to reset Apple ID security questions
Similar Messages
-
I have one of the original iPads. Suddenly (from yesterday) when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?
Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
I want to delete the last 2 sheets in a Pages document. I select them in the thumbnails, but can't delete them.
When I choose delete, the 1st five pages are deleted.
What do I do?"2) The last page, p 6, is not in a Section. When I delete p 6 ....pages 2 - 6 are deleted.
Only page 1 remains."
Every page in a Pages word processing document is "in a section". It may be the only page in its section, or it may be in the same section as several other pages. From the behaviour you are describing, I'd suspect your document has two sections: section 1 contains only Page 1, section 2 contains pages 2 to 6.
When you click on the Page 6 icon in the sidebar to the left of the page, you'll see a yellow border around all or part of that page icon.
If the yellow border contains only page 6, then Page 6 is in a section by itself, and pressing delete will delete only page 6.
If the yellow border contains page 6 AND any other pages, then all of the pages within that yellow border are in the same section, and pressing delete (while the icons are selected) will delete all of the pages in that section.
To delete only page 6 (the last page in the document) you need to either:
Delete any text content (including invisible characters, and preferably including any other objects) on that page, following the suggestions by Peter above,
OR
Click immediately after the last text character on Page 5, then go Insert > Section Break to place Page 6 into a section of its own. Then click on the Page 6 icon in the sidebar, check that the yellow border encloses only page 6, and press delete.
Regards,
Barry
PS: It's pretty easy to add extra pages to a document without seeing the invisible characters that cause the page to appear. Not as easy as it was in Appleworks, fortunately where the personal record for one of my Grade 5 students was a 3 page document with over 1000 extra blank pages sent to a printer. AppleWorks read the enter key as a column break (which acts like a page break on a single column document). On a keyboard with a number pad, enter is in a very convenient location to rest a book (or an arm) while thinking about your writing (or chatting with your neighbor). -
I have a 27in Mac desk top, its about a 2009, after several power outages and the computer pluged up and on now when turn it on it shows a white screen, apple in the center and a time strip toward the bottom when the time strip goes to the end of the cycle it shuts its self off.
The only thing we have tryed which was from a forum which was simular problem was, command-option-p-r, hold them down til the screen was back up, we try several times it did not work, please,please some-one help we use this computer for our job.Also the trick you used, is known as resetting the PRAM. Not always the best of ideas for Macs older than 4 years. But I'm glad it worked for you. There is a battery which will eventually need replacing inside that would actually make that technique stop your Mac from working until replaced.
-
Hello
I just signed up to start downloading music on my ipod and when I got to the end it said can't process now. Does that mean that the system is down or will I need to do this all over again?> Thank youIf your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore. -
Using my current ID and password I can sign in to Adobe. When I try to download the upgrade to Flash Player they ask for my ID and Password. When I insert my current ID and password it is rejected. How do I correct this problem? Is it an incorrect sign in from an old ID, and/or an old password associated with Flash Player?
The password prompt is supplied by the operating system, and is intended to protect you from accidentally installing software. You will get this prompt for any installation outside the App Store context.
If you do not need to enter a username or password when starting your computer, you can probably just leave the password field blank when acknowledging this prompt. -
I have a second hand iPhone 4S and it's locked to someone's Apple ID . I don't know the previous owner so I can't ask them to erase this device. So what is the sollution?
You need to return the Device for a refund, as you will not be able to re-activate it.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
IanThis may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/ -
FIRST there are some games and music in ITunes on the VIAO. When I try to sync them to the ITOUCH or the IPAD I get a message that I am not authorized….Go to the ITunes Store and Authorize this computer. I have completed this procedure several times and receive back the message you are authorized on this computer and I have authorized 2 of 5 devices allowed.
Why am I not able access the games and music on my machine? How can I sync these items to my ITOUCH and MY IPAD
SECOND How do I move my music and Games from ITUNES on the G5 to TUNES on the PC so I am able to sync those items to my devices.
I have inherited my wife’s Laptop a:
SONY VIAO
MS Windows XP Home edition V 2002
Service Pack 3
ACPI Uniprocessor PC
Owner dvkpqpg2.
ITunes 11.01.1.12 updated 12/8/12
I am both a PC and ITunes Rookie.
I have some MAC experience and presently use a:
Mac Dual PowerPC G5
OS 10.4.11
2.5GB DDR SDRAM
ITunes 9.2.1
ITOUCH MC011LL
64 GB----57 GB avail
iOS 5.11
IPAD MC954LL
iOS 6.0.1
16 GB----37 GB availIf you want the ability to add music from multiple libraries see this thread.
If you no longer have access to the computer that has your original library then see Recover your iTunes library from your iPod or iOS device.
tt2 -
Hi, was very surprised when I received a text message saying that $4.99 was charged on my credit card from the App store. I couldn't sleep at all because this wasn't expected at all. I downloaded the app through my.....
itunes after the upgrade to the doeseo deureksyeon application updates are not going well for pre-application has been turned off twice, so update hwanbulhaeju should not send money!
Please also check and application! Update what's wrong!! You do!
$10.87 !!!!!
You do!This is a user to user forum: you aren't talking to Apple here, and no-one on here can help you. You need to contact Support. Go to https://expresslane.apple.com ; select 'iTunes' in the first column and then 'iTunes Store' in the second column. In the third column click 'Purchases, Billing & Redemption' and proceed from there.
-
My version of Lightroom 6 is still showing trial version after Serial Number has been Installed.
I have tried re-installation but still have the same problem.
Could you please forward a solution to this problem.Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
i have no messages in my phone but my storage is 90% full and in my usage it says i have 12MG in messages (saved) but i dont have any messages in my phone - where are they saved ? how can i delete them? please help
pamalushka54,
We want to make sure that we get your phone up and running. Can you look to see where you have the most stuff stored at. Settings>General>Usage>Storage.
This will tell you what exactly is using everything. Then you can delete things from there.
RobinD_VZWSupport
Follow us on twitter @VZWSupport -
can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?
As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
Try pairing the remote again:
How to Pair your Remote to your Mac:
http://support.apple.com/kb/HT1619?viewlocale=en_US -
I got home today and got a message on Messages or IMessage and the Messages app would not open i restarted my computer and it had a question mark as the icon for the app. Help!?!?! What does this meen how can i prevent further damage or fix damage delt
Is this what you see when you start up your MBP?
http://support.apple.com/kb/ts1440
Ciao. -
I get an error 42110 upon opening itunes. It has no effect on downloading to or playing my library. However when I try to print a jewel case insert the text prints over its self. How do I fix this. It only started recently.
Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes
Maybe you are looking for
-
I don't know how to go to applications without losing moxilla website in order to transfer the moxilla icon into my applications. I could do it in the dell computer but not able to swing it with the Mac. it's totally different system.
-
10.4.3 - Loss of Network & Bluetooth Problems
This is the fist time I have ever had an issue with an Apple software update... My system is an Aluminum Powerbook, 1.5ghz, 512mb RAM (Will be 1 gb once new module received, see below...) I upgraded to 10.4.3 and am having major problems. Tracked one
-
Trouble with a Flash Component
I'm sorry if this question has been asked before. If I had more time, I would have searched the forums, but I'm kind of on a time limit. I'm having trouble wtih getting a goto command to translate through a scrollpane. I have a movie clip with about
-
I'm trying to scan across multiple domains with the MAP toolkit. I have a stand-alone computer not in any domain and I'm searching by IP address. When I try to enter the credentials I use domain\username and I get an error that I the wizard can't a
-
In the HTML page, in a <table>, I've inserted an applet. In the <TABLE> tag, there is a background image. Is it possible to see this background image ( perhaps by setting a transparency attribute of the applet ) as abckground of the applet ? Thanks a