Many objects are partially transparent though opacity is always set to 100%

I've noticed that many of my objects in this 3D project appear slightly transparent, as if the opacity is set to 85% or so, and I have no idea why. For example, when two objects are on screen and one is in front of the other in terms of Z space, I can see the other object coming through. Any idea why this is happening?
Many thanks,
Jagr

A screenshot might be helpful to know when/how you're seeing this
I'm with David, thinking that it's set at a higher level somewhere.
Have you used a light in the project? Also, have you tried to solo out a group with this issue, and does the problem persist in solo mode?

Similar Messages

How many Objects are created in this?

Hi,
How many objects are created in the flwg code:
String str = new String("Hello");
String str2 = "Hey there";
str = str + str2;

Depends if you're counting objects created at compile time.
"Hello" is created at compile time. That's 1.
new String("Hello") creates a new String object at runtime, pointing its backing array at the "Hello" in the constant pool. That's 2.
"Hey there" is created at compile time. 3.
str + str2 I might do everything at compile time, or it might do some at runtime. I don't know if str is considered a compile time literal here. I think not, but I'm not sure. You can check by using javap. If I'm correct, then at runtime you'll create a StringBuffer (4) and another String (5).
So I'd say 5 objects. But if the compiler treats str as a literal and therefore can do the str+str2 at compile time, then it might do so without creating the StringBuffer. Or it might still create it at compile time, use it, and throw it out.

How Many Objects Are Selected

How can I tell how many objects are selected when I draw a selection marque around multiple objects?

Open the Document Info Palette.
Find its secret little flyout menu.
Select from that menu "Objects".
Let go.
Then go to that same menu all over again and select "Selection Only".
Scroll through the list and sum the quantities shown. Except be careful not to include the count of "All Text Objects" with the counts of "Point Type Objects", "Area Type Objects", and "Type On A Path Objects".
Repeat those steps every time you start a new work session in AI, because AI's palettes can't remember the way you set them between launches.
How could you have overlooked that intuitive and straightforward routine?
JET

How many objects are created?

I have this question which some one posted to me.
He asked me how many objects are created when an object of a simple class is created for example
class A{
public static void main(String args[])
A a1 = new A();
Now how many objects are created? I think only one. Can anyone tell me if any other objects are also created.
Plz tell me .

No, the answer is indeed 1. All the other objects
(including the String[] in the main method
parameters) are created outside of the A
class, either by the JVM itself or by some other
class that calls the A.main() method. You can try
this out for yourself by adding a constructor such as
A()
System.out.println("Creating class A");
} and see what prints out.Take a closer look at the question:
how many objects are created when an object of a
simple class is created for exampleIt doesn't say "how many objects of type A are created".
I.e. The VM has to load class A before you can create an object from it, and thus an object of type Class is created. There are also a bunch of other objects which needs to be created before you can instantiate A.
Kaj

Seing how many objects are selected.

Hi! I'm having a problem seing how many objects are selected when I navigate in Finder's windows. In Snow Leopard, there used to be a grey bar at the bottom telling you these infos, but this seems to be gone in Lion. Anyone knows how to get it back?
Thank you!

Open the Document Info Palette.
Find its secret little flyout menu.
Select from that menu "Objects".
Let go.
Then go to that same menu all over again and select "Selection Only".
Scroll through the list and sum the quantities shown. Except be careful not to include the count of "All Text Objects" with the counts of "Point Type Objects", "Area Type Objects", and "Type On A Path Objects".
Repeat those steps every time you start a new work session in AI, because AI's palettes can't remember the way you set them between launches.
How could you have overlooked that intuitive and straightforward routine?
JET

When closing Firefox, after reopening it, my tabs are gone, even though I have Firefox set to remember session.

When closing Firefox, after reopening it, my tabs are gone, even though I have Firefox set to remember session. However, after several hours and opening and closings of Firefox, it will open tabs from the old session, for no apparent reason.

You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Delete the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
In case you are using "Clear history when Firefox closes":
*do not clear the Browsing History
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.

Garbage Collection: how many objects are created after for loop?

Please see the fallowing java code
1 public class Test1 {
2
3     public static void main(String[] args) {
4
5          MyObj obj = null;
6          for(int i=0;i<5;i++){
7               obj = new MyObj();
8          }
9 // do something
10
11     }
12 }
so my question is How may objects are eligible for garbage collection at line no: 9 (// do something)?

so my question is How may objects are eligible for
garbage collection at line no: 9 (// do something)?It's impossible to answer that question since we don't know how MyObj is implemented.
Kaj

How many objects are in my map?

hi all
I nead help in a question about maps in java:
In one map could be stored various references with diferent keys to just one real object. How can i count all objects referenced by my map? (not all references with map.size())
Is it wise to use a set parallel to the map who contains just unique objects? Or is there an other, more beautiful solution?
many thanx for your help
benjamin

If you want a more general solution you can use an interface. Now you can store any class in MyMap as long as it implements RefCount.
interface RefCount {
   int getRef();
   void incRef();
   void decRef();
class MyValue implements RefCount {
    private int ref;
    public int getRef() {return ref;}
    public void incRef() {ref++;}
    public void decRef() {ref--;}
class MyMap extends HashMap {
    int objects = 0;
    public Object put(Object key, Object value) {
        RefCount v = (RefCount) value;
        if (v.getRef() == 0)
            objects++;        // first time inserted
        v.incRef();
        return super.put(key,value); // call superclass put
    public Object remove(Object key) {
        RefCount v = (RefCount) super.remove(key); // super class remove
        if (v != null) {
            v.decRef();
            if (v.getRef() == 0)
                objects--;        // last time removed
        return v;
    public int objectSize() { // returns number of objects.
        return objects;

Why objects are invalid?

Hi all,
IS there any specificreasons why there are so many objects are invalid....
[per]
SQL>
SQL> select A.Owner Oown,
2 A.Object_Name Oname,
3 A.Object_Type Otype,
4 'Miss Pkg Body' Prob
5 from DBA_OBJECTS A
6 where A.Object_Type = 'PACKAGE'
7 and A.Owner ='data'
8 and not exists
9 (select 'x'
10 from DBA_OBJECTS B
11 where B.Object_Name = A.Object_Name
12 and B.Owner = A.Owner
13 and B.Object_Type = 'PACKAGE BODY')
14 union
15 select Owner Oown,
16 Object_Name Oname,
17 Object_Type Otype,
18 'Invalid Obj' Prob
19 from DBA_OBJECTS
20 where Object_Type in
21 ('PROCEDURE','PACKAGE','FUNCTION','TRIGGER','PACKAGE BODY','VIEW')
22 and Owner ='data'
23 and Status != 'VALID'
24 order by 1,4,3,2
25 /
data
CHK_CURR_CORR_REG_ART_CO_DEEP
FUNCTION Invalid Obj
data
FN_CHK_MAIN_ACT
FUNCTION Invalid Obj
data
F_GET_FC_OPBAL
FUNCTION Invalid Obj
data
F_GET_LC_OPBAL
FUNCTION Invalid Obj
data
F_GET_MAIN_FC_OPBAL
FUNCTION Invalid Obj
data
F_GET_MAIN_LC_OPBAL_DIV_1
FUNCTION Invalid Obj
data
F_GET_MAIN_LC_OPBAL_DIV_DEPT
FUNCTION Invalid Obj
data
F_GET_SUB_FC_OPBAL
FUNCTION Invalid Obj
data
F_GET_SUB_LC_OPBAL
FUNCTION Invalid Obj
data
ODB_CHK_COMB_FIRM
FUNCTION Invalid Obj
data
O_DGET_JOB_AUTO_CSV_STS_AUTO
FUNCTION Invalid Obj
data
O_DGET_JOB_CSV_STATUS
FUNCTION Invalid Obj
data
O_GET_SRN_APPL_DT
FUNCTION Invalid Obj
data
O_GET_SRN_CCT_REG_DT
FUNCTION Invalid Obj
data
O_GET_SRN_NAME1
FUNCTION Invalid Obj
data
O_GET_SRN_PAID_FEES
FUNCTION Invalid Obj
data
REM_TEST
FUNCTION Invalid Obj
data
SAR_TEST_FUNC
FUNCTION Invalid Obj
data
CUSTOMER_UPDATE
PACKAGE Invalid Obj
data
OVERLOAD_EG
PACKAGE Invalid Obj
data
PACK1
PACKAGE Invalid Obj
data
PDM_STUD_REFUND_PECS
PROCEDURE Invalid Obj
data
PDM_STUD_REFUND_TCS
PROCEDURE Invalid Obj
data
PDM_STUD_REG_CCT
PROCEDURE Invalid Obj
data
PDM_STUD_REG_FND
PROCEDURE Invalid Obj
data
PDM_STUD_REG_INT
PROCEDURE Invalid Obj
data
PDM_STUD_REG_INT_DUMMY
PROCEDURE Invalid Obj
data
PDM_STUD_REG_INT_DUP_FND_NO
PROCEDURE Invalid Obj
data
PDM_STUD_REG_PE2ART
PROCEDURE Invalid Obj
data
PDM_STUD_REG_PE2ART_RAGHU
PROCEDURE Invalid Obj
data
PDM_STUD_REG_PEI
PROCEDURE Invalid Obj
data
PDM_STUD_REG_PEII
PROCEDURE Invalid Obj
data
ODBTRG101_ITEM
TRIGGER Invalid Obj
data
ODBTRG103_REF
TRIGGER Invalid Obj
data
ODBTRG437_AAT_ACVT_UPT_DAK
TRIGGER Invalid Obj
data
ODBTRG437_AFCD
TRIGGER Invalid Obj
data
ODBTRG437_AFCD_01
TRIGGER Invalid Obj
data
ODBTRG437_AR
TRIGGER Invalid Obj
data
ODBTRG437_BIN
TRIGGER Invalid Obj
data
OV_MEM_FEE_CHK
VIEW Invalid Obj
data
A_DUMMY
PACKAGE Miss Pkg Body
data
CUSTOMER_UPDATE
PACKAGE Miss Pkg Body
data
DBMS_LOCK
PACKAGE Miss Pkg Body
data
ORNDBPKG_ART_FEE_COLL
PACKAGE Miss Pkg Body
data
OVERLOAD_EG
PACKAGE Miss Pkg Body
data
PACK1
PACKAGE Miss Pkg Body
data
PKS
PACKAGE Miss Pkg Body
data
RECEIPT_NO_VARIABLE
PACKAGE Miss Pkg Body
data
STAGE_PACK
PACKAGE Miss Pkg Body
SQL> spool off

SET SERVEROUTPUT ON;
SET LINESIZE 1000;
DECLARE
     || Cursor to all Object types in All_Objects belonging to the current user.
     CURSOR Cur_Object_Types
     IS
     SELECT DISTINCT Object_Type
       FROM All_Objects
      WHERE Owner = User;
     || Select the Invalid objects for the given object type.
     CURSOR Cur_Invalid_Objects(
          p_Object_Type     IN All_Objects.Object_Type%TYPE
     IS
     SELECT Object_Name, Status
       FROM All_Objects
      WHERE Object_Type = p_Object_Type
        AND Status <> 'VALID'
        AND Owner = User;
     || Cursor to select the status of function based indexes.
     CURSOR Cur_FuncIdx
     IS
     SELECT Index_Name, FuncIdx_Status
       FROM User_Indexes
      WHERE FuncIdx_Status <> 'ENABLED';
     || Select all public synonyms created for current user object for
     || which underlying objects does not exists.
     CURSOR Cur_Synonyms
     IS
     SELECT Synonym_Name
           FROM All_Synonyms
      WHERE Owner = 'PUBLIC'
        AND Table_Owner = User
        AND Synonym_Name NOT IN (SELECT Object_Name
                             FROM User_Objects);
     ln_LoopCnt     NUMBER;
     ln_TabIdxCnt     NUMBER;
     lv_Object_Type     VARCHAR2(100);
     lv_Object_Name     VARCHAR2(100);
     lv_Status     VARCHAR2(100);
     TYPE IObj_Type
     IS
     RECORD (Object_Type     VARCHAR2(100)
            ,Object_Name     VARCHAR2(100)
            ,Status          VARCHAR2(100)
     TYPE IObj_Tab_Type
     IS
     TABLE OF IObj_Type;
     IObj_Table      IObj_Tab_Type;
BEGIN
     DBMS_OUTPUT.DISABLE;
     DBMS_OUTPUT.ENABLE(999999999999);
     DBMS_OUTPUT.PUT_LINE(CHR(10));
     IObj_Table   := IObj_Tab_Type();
     ln_TabIdxCnt := 0;
     FOR I IN Cur_Object_Types
     LOOP
            ln_LoopCnt := 0;
          FOR J IN Cur_Invalid_Objects(I.Object_Type)
          LOOP
               ln_TabIdxCnt := ln_TabIdxCnt + 1;
               ln_LoopCnt   := ln_LoopCnt + 1;
               IObj_Table.Extend;
               IObj_Table(ln_TabIdxCnt).Object_Type := I.Object_Type;
               IObj_Table(ln_TabIdxCnt).Object_Name := J.Object_Name;
               IObj_Table(ln_TabIdxCnt).Status      := J.Status;
          END LOOP;
     IF ln_LoopCnt = 0 THEN
          ln_TabIdxCnt := ln_TabIdxCnt + 1;
          IObj_Table.Extend;
          IObj_Table(ln_TabIdxCnt).Object_Type := I.Object_Type;
          IObj_Table(ln_TabIdxCnt).Object_Name := ' ';
          IObj_Table(ln_TabIdxCnt).Status      := 'NONE';
     END IF;
     END LOOP;
     ln_LoopCnt := 0;
     FOR K IN Cur_FuncIdx
     LOOP
          ln_TabIdxCnt := ln_TabIdxCnt + 1;
          ln_LoopCnt   := ln_LoopCnt + 1;
          IObj_Table.Extend;
          IObj_Table(ln_TabIdxCnt).Object_Type := 'FUNCTION BASED INDEX';
          IObj_Table(ln_TabIdxCnt).Object_Name := K.Index_Name;
          IObj_Table(ln_TabIdxCnt).Status      := K.FuncIdx_Status;
     END LOOP;
     IF ln_LoopCnt = 0 THEN
          ln_TabIdxCnt := ln_TabIdxCnt + 1;
          IObj_Table.Extend;
          IObj_Table(ln_TabIdxCnt).Object_Type := 'FUNCTION BASED INDEX';
          IObj_Table(ln_TabIdxCnt).Object_Name := ' ';
          IObj_Table(ln_TabIdxCnt).Status      := 'NONE';
     END IF;
     ln_LoopCnt := 0;
     FOR L IN Cur_Synonyms
     LOOP
          ln_TabIdxCnt := ln_TabIdxCnt + 1;
          ln_LoopCnt   := ln_LoopCnt + 1;
          IObj_Table.Extend;
          IObj_Table(ln_TabIdxCnt).Object_Type := 'PUBLIC SYNONYM WITHOUT UNDELYING OBJECT IN SCHEMA '||USER;
          IObj_Table(ln_TabIdxCnt).Object_Name := L.Synonym_Name;
          IObj_Table(ln_TabIdxCnt).Status      := 'UNDERLYING OBJECT NOT FOUND';
     END LOOP;
     IF ln_LoopCnt = 0 THEN
          ln_TabIdxCnt := ln_TabIdxCnt + 1;
          IObj_Table.Extend;
          IObj_Table(ln_TabIdxCnt).Object_Type := 'PUBLIC SYNONYM WITHOUT UNDELYING OBJECT IN SCHEMA '||USER;
          IObj_Table(ln_TabIdxCnt).Object_Name := ' ';
          IObj_Table(ln_TabIdxCnt).Status      := 'NONE';
     END IF;
     IF IObj_Table.COUNT > 0 THEN
          FOR I IN 1..IObj_Table.COUNT
          LOOP
          lv_Object_Type     := IObj_Table(I).Object_Type;
          lv_Object_Name     := IObj_Table(I).Object_Name;
          lv_Status     := IObj_Table(I).Status;
               IF I = 1 THEN
                    DBMS_OUTPUT.PUT_LINE('+-----------------------------------------------------------------------------------------------------------------------------+');
                    DBMS_OUTPUT.PUT_LINE(RPAD('|                                               LIST OF INVALID OBJECTS',134,' ')||'|');
                    DBMS_OUTPUT.PUT_LINE('|-----------------------------------------------------------------------------------------------------------------------------|');
                    DBMS_OUTPUT.PUT_LINE(RPAD('|                   OBJECT TYPE                              |               OBJECT NAME        |               STATUS',134,' ')||'|');
                    DBMS_OUTPUT.PUT_LINE('|-----------------------------------------------------------------------------------------------------------------------------|');
               END IF;
               DBMS_OUTPUT.PUT_LINE('| '||RPAD(lv_Object_Type,59,' ')||'| '||RPAD(lv_Object_Name,32,' ')||' | '||RPAD(lv_Status,28,' ')||'|');
          END LOOP;
          DBMS_OUTPUT.PUT_LINE('|-----------------------------------------------------------------------------------------------------------------------------|');
     ELSE
          DBMS_OUTPUT.PUT_LINE('THERE ARE NO INVALID OBJECTS IN SCHEMA '||USER||'.');
     END IF;
     DBMS_OUTPUT.PUT_LINE(RPAD('| NOTE: ',134,' ')||'|');
     DBMS_OUTPUT.PUT_LINE(RPAD('|      If you find any object in status INVALID / DISABLED / UNDERLYING OBJECT NOT FOUND, then ',134,' ')||'|');
     DBMS_OUTPUT.PUT_LINE(RPAD('|      execute the procedure RECOMPILE_INVALID_OBJECTS to fix the same.',134,' ')||'|');
     DBMS_OUTPUT.PUT_LINE('+-----------------------------------------------------------------------------------------------------------------------------+');
END;
[\pre]
HTH..

How many String are created?

public String makinStrings() {
     String s = �Fred�;
     s = s + �47�;
     s = s.substring(2, 5);
     s = s.toUpperCase();
     return s.toString();
}How many objects are created when this method is called?
My answer is 5
1. "Fred"
2. "47"
3. "Fred47"
4. "ed4"
5. "ED4"
But my friend is telling it is 3.
1. "Fred"
2. "47"
3. "Fred47"
I know that any method called on String object creates a brand new String. Please help me with the solution whether it is 3 or 5.

hi,
First of all i want to thanks for all of your replies.
My friend is saying that when we say "How many objects when method is invoked" it means at runtime. String literals are not created at run time.
String s = �Fred�; // No object is creatd here
s = s + �47�; // One object created "s"
s = s.substring(2, 5); //Another object "s"
s = s.toUpperCase(); //Another object "s"
return s.toString();
Hence total 3 objects.
Now the i have got a doubt. Are String literals created at Complie time itself. Or since String s = "Fred" is a compile time constant field. And String literal "47" is also a compile time constant field.
Suppose if the code is like this
String s = new String("Fred")
String s1 = s; ---------------- Then is this String object created at Run time.
String s2 = "47" ----------- This object is created at Complie time.
Please clarify my doubt.

Anchored objects are transparent

Thanks in advance for the help. I am using CS5.
I have a document were multiple anchored objects ended up overlapping each other. My problem is that the anchored objects have a transparency set to them that I cannot remove. Things to note:
The transparency goes away if I release the anchored object.
I have an object style assigned to the anchored frames, but there are style overrides that I cannot clear on the anchored objects.
Changes I make to the object style assigned to the anchored objects have no effect. Only the "anchored objects options" attributes box will modify the anchored objects.
Any help with this issue would be great. Thanks!

You Sir, are an absolute genious! It makes absolute and perfect sence, but I guess that's what they mean by "Hindsight is 20/20."
Thanks again!

Certain objects are transparent in flash movie

I've been getting reports from users that certain objects are invisible in my flash banner. The browser culprit is IE 8 (but someone also reported seeing this in IE 6). I have been unable to duplicate this and therefore, find it very difficult to troubleshoot. I do have the Wmode set to transparent, but I've made it opaque and still had the "invisible" reports. Here is the site:
http://tekkytoys.com
The objects reported as invisible are the robot's body and head. If someone out there can see this and give me a clue, it would be very helpful.
Thanks!
Mark

First guess here is that some elements may require a certain version of the player, and they don't have it!

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase co

Eraser tool in Photoshop CS4 acts as if it is transparent when on brush or pencil mode. Block acts like its not transparent at all but there are no options for opacity, flow or brush size. Whats wrong and how to I make the brush and pencil eraser erase completely without having to go over it multiple times?
It started randomly about two weeks ago and I thought it was a glitch that would just go away. But now I am getting sick of using only the block eraser on one size. Help?

The easiest thing to start with is to reset the Eraser Tool.
Right click on the Eraser icon in the tool options bar and then click on Reset Tool.

How many java String objects are created in string literal pool by executin

How many java String objects are created in string literal pool by executing following five lines of code.
String str = "Java";
str = str.concat(" Beans ");
str = str.trim();
String str1 = "abc";
String str2 = new String("abc").intern();
Kindly explain thanks in advance
Senthil

virtuoso. wrote:
jverd wrote:
In Java all instances are kept on the heap. The "String literal pool" is no exception. It doesn't hold instances. It holds references to String objects on the heap.Um, no.
The literal pool is part of the heap, and it holds String instances.
[http://java.sun.com/docs/books/jvms/second_edition/html/Overview.doc.html#22972]
[http://java.sun.com/docs/books/jvms/second_edition/html/ConstantPool.doc.html#67960]
You're referring to the JVM. That's not Java.It's part of Java.
There is nowhere in Java where it is correct to say "The string literal pool holds references, not String objects."

How many WAYS are there to CREATE an OBJECT?

I simply know about implicit creation and explicit creation:
String name = "Asim Munir"; //Implicit
String name = new String("Asim Munir"); // Explicit
Do you have any other way to create an object?

Hi,
Basically in Java, an object is created by using the new keyword. This is the actual object creation. So far String is concerned, there is a trick what you have mentioned.
Plz go through it.
String str = "India"; It is also String object. But internally, Java maintains a String Constant pool to maintain the String object. When you are writing the above statement, it will first check the value "India" in the String Constant pool and it it does not find, then it will create an object. If it finds, it will not create but simply it maintain a reference to that "India" object. So here only one object is created. But in the following case.
String str = new String("India");
Here two objects are created. Just try to understand how two objects are created. If you have any problem, feel free to mail
Debadatta Mishra
[email protected]

Many objects are partially transparent though opacity is always set to 100%

Similar Messages

Maybe you are looking for