Many times I drop a photo into a book page box and it resizes it.  I want to scale it smaller but it only allows me to make it bigger.  Why can't I slide to make it smaller?

many times I drop a photo into a book page box and it resizes it.  I want to scale it smaller but it only allows me to make it bigger.  Why can't I slide to make it smaller?

Control (right) - click on the photo in the frame and select Fit to Frame Size in the contextual menu.
Here's an extreme example of that:
OT

Similar Messages

  • What's up when you drag and drop a table into a jsp page?

    Hi All,
    I was wondering what's happen in dragging and drop a table into a jsp page. This question because untill yesterday i had an application up and running, with a table displaying a number of rows of the database, and an action associated with an update into a database.
    The action is managed trough JNDI, defined from Preference-Embedded.......
    It was working.
    Then the machine hosting the db changed IP addres. I went into Webcenter Administration console, I've changed the connection string into the jdbc parameters, by updating the new IP address... but it's not working anymore! The log comes out with a big error, but basically it can't connect at the db!
    So, I think there is somewhere some reference to the old db.....where???
    Thanks
    Claudio

    Yes Shay,
    I got this error:
    JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.DMLException, msg=JBO-26061: Error while opening JDBC connection.
    in few hours I'll be able to give you the full stack.
    Thanks
    Clauido
    Message was edited by:
    user637862
    Hi Shay,
    Thanks a lot..you were right.
    I've located the ba4j on the webcenter server...and I've noticed that it was with the old address.
    I think it's a bug, cause on the local machine (before to deploy) this file comes with the right address.
    So next time, before to redeploy a new application, I think I'm going to fiscally delete the folder from j2ee folder.
    Thanks again for the help!
    Claudio

  • I dropped my phone into the bath last night and it was working perfectly fine the hole day, I went to put it on charge and now it won't charge or even turn on what do I do

    I dropped my phone into the bath last night and it was working perfectly fine the hole day, I went to put it on charge and now it won't charge or even turn on what do I do

    You can try drying it out internally by wrapping the unit in a paper towel and putting it in a bag with a dessicant safe for electronics such as silica gel pellets, or failing that in a bag of dry, uncooked rice, for a few days. It's very probable that it's been permanently damaged, but it's possible that if you dry it out, it may then work. If after a few days in the bag it still has problems, then you'll need to pay to get it exchanged (by Apple) or repaired (by a third-party repair service) or buy a new iPhone.
    Good luck.

  • I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

    I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

    . Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
    Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
    See:                  Keywords or ratings are applied only to one of the selected images - why?
    Uncheck the little square button with the "1".

  • Every time i put a clip into the timeline it crashes and just has the color wheel i have to force quit the program.

    I just downloaded the trial to see if I wanted to buy instead of using Adobe Premiere.  Every time i put a clip into the timeline it crashes and just has the color wheel i have to force quit the program.  I tried deleting the program and reinstalling it. Please help. Here are my specs
    2.3 GHz Intel Core i5
    16 GB 1333 MHz DDR3
    Intel HD Graphics 3000 512 MB
    OS X 10.8.2

    Is this for FCP-X?
    Wrong forum, you need to post here:
    http://discussions.apple.com/community/professional_applications/final_cut_pro_x

  • I typed in data into the highlighted text box, and then tried to print my form.  However, when printed, the copy only showed a portion of my answer.  Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my re

    I typed in data into the highlighted text box, and then tried to print my form.  However, when printed, the copy only showed a portion of my answer.  Is there a way to expand Adobe Reader's highlighted text to show my full response, or should I make my responses only as long as the highlighted portion allows?

    While printing any pdf file it will print the visible text only. To overcome this, the form needs to be dynamic so that it expands in layout while entering more data. Usually dynamic forms are developed by Adobe LiveCycle Designer.
    ~Deepak

  • I am a BT Yahoo customer using Apple Mail, on iMac, iPad iPhone, 4 to 8 times a week sent mail is not delivered into the sent mail box and I have no record of the sent e-mail or its content. BT say it's an apple problem. Any help would be appreciated. Ted

    I am a BT Yahoo customer using Apple Mail, on iMac, iPad iPhone, 4 to 8 times a week sent mail is not delivered into the sent mail box and I have no record of the sent e-mail or its content. BT say it’s an apple problem. Any help would be appreciated. Ted

    Hello,
    Are they just regular size eMails?
    Do you have more than one eMail account setup?
    Next time it happens, get...
    Find Any File...
    http://apps.tempel.org/FindAnyFile/
    Hold Option or alt key when selecting Find to Find All.
    Use it to Find All, for Name ends in...
    .emlx
    (dot ee em el ex)
    And Modification Date, is within, the last 5 minutes or whatever.

  • When i go into history to delete everything but when i go to type site it comes up and name and password are saved i want to delete all this but cannot

    Question
    when i go into history to delete everything but when i go to type site it comes up and name and password are saved i want to delete all this but cannot edit

    Quote from the article.
    Time Machine in OS X Lion includes a new feature called "local snapshots" that keeps copies of files you create, modify or delete on your internal disk. Local snapshots compliment regular Time Machine backups (that are stored on your external disk or Time Capsule) giving you a "safety net" for times when you might be away from your external backup disk or Time Capsule and accidentally delete a file.
    So what makes a notebook any different then a desktop, other then with a desktop you might have your tm backup drive connected all the time.
    The object here is to not indiscriminately delete files you need or want to keep. I personally have never deleted a file I wanted to keep.
    In essence a backup is for catastrophic failure of your system. So it can be restored once that failure has been fixed. Not because you go in willy nilly and start deleting files.

  • Why Can't I slide email addresses from MAIL to ADDRESS BOOK :-(

    Am I missing something?
    Why can't I slide all the email addresses from an email to a group in my Address Boob. I am shocked that this is not easily possible.
    Am I missing the easy way to do this?

    In addition to the suggestions, [Mails Scripts|http://homepage.mac.com/aamann/Mail_Scripts.html] has an applescript that will collect all the addresses in an email and give you the option to select a subset and save to a group or make a new group.

  • Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab.  It allows me to select my hard drive selection, but will not allow me to make any other selections.  Does anyone know their way around this obstacle?  Thanks!

    Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab.  It allows me to select my hard drive selection, but will not allow me to make any other selections such as options.  Does anyone know their way around this obstacle?  Am I doing anything wrong?  Thanks

    Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
    But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
    Thanks for your helpfulness, anyway.
    And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

  • I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

    I have an epson xp600 and a mac book pro. Wireless printing is OK if I'm lucky for one time only then a 'failed to connect' message so I have to delete and re add the printer to get it working again (but just once!) then the same occurs. Why?

    I am not certain this will fix your problem but I suggest you assign the printer a static IP address.
    Using the printer's front panel, select Menu > Network > WLAN > TCP/IP > Boot method, and change it to "static". Provide a static IP address that is on your LAN's subnet.
    For example, if you are using an AirPort Extreme, you might give it an IP address of 10.0.1.100. If you are using a Netgear or Linksys router that defaults to issuing 192.168.x.x addresses, you might give it an address of 192.168.1.100. That way, the printer will always "reside at the same address" on your network. If your router has the ability, you should reserve that address so that the router does not attempt to assign it to another DHCP device.
    Then, go to System Preferences > Print & Scan, and delete your existing printer with the "–" (minus) button. Add it again, using the "+" (plus) button. In the window that appears, select the IP pane, and from the Protocol menu select "Line Printer Daemon (LPD)". In the Address field type the IP address you gave your printer.
    If all goes well the "Pring Using" field will detect the printer at that address and automatically select the appropriate driver. You will see something similar to the following screenshot ("name" can be whatever you decide, and "location" is optional):
    Click Add, then you can close System Preferences.
    There are other possible reasons your printer is "not responding" which could include wireless interference from competing wireless networks, but try this "static IP" method first. It should mitigate the problem.

  • Can I drag and drop single photos into Events?

    Hi guys. I've very recently ordered a new Mac that will have iLife 08 on it. Before I get started with it I've got a question about Events. I've been using iPhoto for the last several years, organizing my photos into albums. I've cleaned up my images to around 1,000 photos, and I plan to only use events for organization. (I don't want to use Events AND albums, don't see the point, I'm going to try using ONLY Events.) But I've got a few scenerios that I'd like to throw by you all, to see if they would work, as I'm hoping that they will...
    I don't shoot photos into pre-defined "Events", I shoot photos by what I feel like shooting. "Hey, my dog is doing something funny" - There's 3 pictures, or "Wow that's a big spider!" - 1 picture, or "My little neice is doing something cute" - There's 4 pictures. I do not want 450 events, each containing 1 - 5 pictures.
    Can I drag and drop single pictures into different events? For example, have an Event called "Friends" with pictures of my friends in it, that I put there? Or an event called "Concerts" with photos taken throughout the years?
    I hope I've made it clear what I'm looking to get out of Events!
    Thanks in advance for any help.

    Exactly - I think he will want to matain his existing structure -- people are making too much of the name change from rolls to events.
    I have events with one photo and events with as many as 2000 photos -- I like this better than rolls but albums, folders and keywords are still the key to granular organization - events are ust the library to hold my photos
    To me it is a small step forward that makes organization much easier (and it was not that hard before)
    Larry Nebel
    PS - now if I could just get all of my edits to save - where are TD and OT to solve that one for me?

  • HT4993 attempted the wrong code to many times now oys saying log into itunes

    Attempted wrong code to many times now its satingblog into itunes

    The following has instructions: http://support.apple.com/kb/ht1212

  • Problem Dragging a photo into a BOOK project

    I did this last week. But now I can't seem to drag a photo out of one album into a book album so that I can add this photo to the book during the layout process. There doesn't seem to be a work-around for this. When I called Apple, they wanted $199.00 to help me trouble-shoot this. Anyone have any ideas how I could fix this or make this work?

    I hope I have the right context: Ruscle is correct, but you have another option. If its not the pick of the stack, you can designate a non-pick as an "album pick". It should work for the book you are working on from then on. Go to the Stack menu and select Album Pick. See example here (scroll about halfway down - look for the "Non-Pick Images" error window):
    http://homepage.mac.com/bagelturf/aparticles/books/blayout/blayout.html
    That site has several nice tutorials and some great tips, by the way.

  • How can I sort photos into albums on my iPad and then export them to my iMac?

    I want to import photos from my camera card into my iPad, sort them into various albums then export the albums to my iMac. I have 12 albums in Photos with around 300 photos on my iPad, but when I connect it to my iMac iPhoto tries to import all of the 1800 photos without the album structure. How do I transfer the albums and the 300 photos in them to my iMac?

    Yes, but the recipient may not be getting the full image file that was used to make the Shared Photo Stream. You would have to run a test to see if there's any reduction in the image and file size. The following is from iCloud: Photo Stream FAQ
    What resolution are the photos in shared photo streams?
    Shared Photo Streams deliver photos in a device-optimized resolution that speeds upload and downloads and saves storage space. While actual dimensions will vary, an optimized version of a photo taken by a standard point-and-shoot camera will have a 2048 x 1536 pixel resolution. Panoramic photos can be up to 5400 pixels wide.
    OT

Maybe you are looking for

  • Authorisation of Purchase order

    Dear All, I want to restrict creation of Purchase order for  a paricular Companny code , Paticular Purchase organisation, purchase group and PO Doic type with  users. EgI have 4 PO Doc types, 2 Company codes, 2 Purchase orgnisations, 6 purchase group

  • Drop Frame media warning

    Im capturing footage from a DVCAM deck using the normal DV-NTSC Easy Setup, however, after logging the clips and preparing a batch capture, I'm getting a Warning prompt: WARNING: You are about to capture Drop Frame media from a device currently detec

  • [SOLVED]Audacious can't open files with spaces on name

    I open audacious Type Ctrl+o and select a directory with spaces on it names, Audacious opens nothing Any ideas? I have deep trees of music with spaces, I was working on a script to rename one by one, but I'm too lazy Cheers Last edited by geckos (201

  • Promoting APEX... Can you do it?

    As a consultant I see a lot of customers... what have this to do with APEX? Well, most of my missions are not APEX related, but for one or an other reason, on 9 out of 10 the customer is using APEX when I'm leaving! ;-) As the same happened with my c

  • Songs on my IPad

    How do I delete songs from my iPod in my iPad?