Mapping a Quantity field

Can I map a quantity R3 field to a characteristic (Data Type NUMC) Infoobject? Thanks

HI Niten,
NUMC stands for numerical char. Basically it represents a numerical object without any unit associated with it. But a qty field is entirely different from a NUMC, since a qty field is associated with an unit.
Hope this helps..
Regards,
R.Ravi

Similar Messages

Mapping of period with total quantity field

Hi All,
I haVe Total quantity field MEG001,MEG002,MEG003..............MEG012 from table COSP.
I have parameter on selection screen as period(perio) from table mbewh
No my requirement is if the period is 00 then field MEG001
if period is 01 then MEG002
period11...........MEG011
period 12............MEG012
Please let me know if any solution.
Regards,
oorvi

Hi,
You could try like this,
parameter: p_period type (your period field).
data: len type i,
var type string.
len = p_period + 1.
concatenate 'MEG' len into var.
select single ( var )
from COSP
into temp
where (any conditions)
Vikranth

How to Map the Unit field in case of DSO and INFOCUBE

Dear Experts,
I have a issue ,Please help me to solve this
I have DSO as provider ,
And, i have to map transformations btw the Datasource and DSO.
In generic Data source, i have unit fields like BASME,MEINS (Quantity units) & STWAE (currency field)
and normal Quantity fields like KWMNG,OAUME(quantity related),OAUWE (value related).
In DSO data fields as Key figure info objects like 0Quantity (which have 0Unit as unit of measure) and some other key figures which have there respective unit of measure in info object definition.
So you Please tell me how to map the Quantity ,Amounts, unit fields to key figures that we have.
(How it will be for both DSO and Info cube is there any difference?)
Edited by: AnjunathNaidu on Jan 18, 2012 1:20 PM

Navasamol ,
If it is works ,will u please tell me what is the difference ,if the transformations btw data source and DSO and
what is the difference btw data source and info cube and btw DSO to Infocube or cube to cube .
And i have seen the Quantity fields and there respective unit fields are mapped directly to key figure info object
in case of Info cube . Its working fine .
If only 1:1 mapping allowed in DSO data fields key figures and there respective unit of measure characteristic.
why this difference btw DSO and Info cube can any one explain me in detail.
Expecting your valuable suggestions.
Thanks & Regards,
Anjunath Naidu
Edited by: AnjunathNaidu on Jan 18, 2012 4:05 PM

Quantity field displayomg units as ERR in Bex

Hi,
We have a quantity field it is showing Units as ERR. Source system for us is DB Connect (Oracle server)and if I right click on this I haven't seen transfer global settings option to do the settings. I have read related posts in SCN but those all are for R/3 source system.If I use NODIM in BEx I cant show the units so hHow do I fix this isuue.
Thanks,
Swathi.

Hi Swati,
Units might be maintained in the separate filed.have you mapped the unit filed to the KF?
If the filed is not mapped just map the filed(before making changes drop the data and reload the data).
once done with the changes and realod the data run the report and check.
Regards
KP

New quantity fields

Hi Gurus,
We have 4 new fields in VBRP table that need to be mapped in COPA to quantity fields. What is the process to do the same?Please advise.
Thanks

Hi,
You make the assignments for quantity in the CO-PA node in SPRO, Flow of actual values --> Assign quantity Fields.
The T Code is KE4M.
Assign the qty fields from billing to qty fields in CO-PA here.
Cheers
Neeraj

How can this happen? Quantity Field values are showing doubles in ODS

Hello BW Gurus,
I have a staging ODS, on top of it a reporting ODS and a cube. I have loaded the data from flatfile to the staging ODS which looks perfectly fine but coming to the Reporting ODS and the cube, the values in quantity field are doubled. If it was just cube where the values were doubled then I might have thought it could be due to double time loading or may be because of duplicate records. But I can see the Quantity values doubled in reporting ODS (which has Overwrite option).
Does anyone has any clues? when we had this issue couple of days back - I have deleted the request from Reporting ODS and Cube and re-loaded it which looked perfectly fine.
But today our issue is back - is it not strange?
help me if you have any thoughts and thanks so much,
Swathi.

Hello Dinesh and Vikash,
My issue has taken a twist and here is the new problem:
on Friday the report was fine
on Saturday the report was fine
on Sunday we had problems with Reporting ODS as it was showing all double values. (I cleaned the reporting ODS and Cube and reloaded the data) after that the report worked fine.
on Monday the report was fine
on Tuesday again we got duplicate values (for few plants) now in staging ODS as well, which has completely with 'overwrite' option with one to one mapping with no routines.
I loaded the same file in DEV. and this was working fine?
I debugged the code that was fine too.
I think this is a strange Issue.
Please let me know your ideas,
Thanks so much,
Swathi

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

Make quantity field of Free goods as non-editable.

Hie!
I have free goods scheme of 9 + 1 .If quantity of main material is 10 then it will split into 9 + 1 where 1 is free of cost.
While making the sales order the free goods quantity field is editable. So the users are able to change the free goods quantity. I want to make this field as non-editable.
Please suggest how to do this.
Thankyou.

Hi Pallavi
If you change the manual qty which is automatically determined by the system then there will be a message thrown by the system
Suppse in your case if 9+1 you change the qty manually to 2 from 1 there is a message V1 no 737 thrown by the system
You need to change the message class thro ABAP development only not possible thro customization
Not only this in delivery also it is possible to change the free qty and this also has to be controlled by the ABAPer only
Regards
Raja

ALV QUANTITY field Geting converted into decimals ?

Hi All ,
I have developed an alv report .In that the quantity field is made editable after editing the quantity when i save it .It gets converted into decimals.Suppose if i give 77 its getting reflected as .077 all the field name ,table name ,reference field name, reference table name, quantity field data type has been passed but the problem persists.If there is any one whos has come across this kind of scenario please share your thoughts on this.
Best Regards,
Sreeram

Hi Sreeram,
I am not gettin this issue. See below code :
If you are gettiing the same issue with the below code then it has something to do with your user settings.
Go to Menu Item System -> User Profile -> Own Data -> Defaults ->Decimal Notation.
Set it to 1,234,567.89 and save. Now try the program again.
REPORT z_test.
TYPE-POOLS: slis.
TYPES : BEGIN OF ty_ekpo,
          ebeln TYPE ebeln,
          ebelp TYPE ebelp,
          ktmng TYPE ktmng,
          menge TYPE bstmg,
        END OF ty_ekpo.
DATA: it_ekpo TYPE TABLE OF ty_ekpo,
      it_fieldcat TYPE slis_t_fieldcat_alv.
SELECT ebeln ebelp ktmng menge
FROM ekpo
INTO TABLE it_ekpo
UP TO 20 ROWS.
PERFORM add_fieldcat USING 'EBELN'.
PERFORM add_fieldcat USING 'EBELP'.
PERFORM add_fieldcat USING 'KTMNG'.
PERFORM add_fieldcat USING 'MENGE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program                = sy-repid
   it_fieldcat                       = it_fieldcat
TABLES
    t_outtab                          = it_ekpo
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORM add_fieldcat USING p_fieldname TYPE slis_fieldcat_alv-fieldname.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-ref_fieldname = p_fieldname.
wa_fieldcat-ref_tabname = 'EKPO'.
IF p_fieldname EQ 'KTMNG'.
    wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM.                    " ADD_FIELDCAT
Regards,
Jovito

Quantity field in ALV

Hello All,
I am using OO - ALV in which I am displaying a quantity field.This field is an editable field and if user tries to change the value and SAVE , it is taking some wrong values.
Say suppose I am having 1.000 as the initial value and if user changes it to 2.000 and saves it is converted to .002.
I tried with qfieldname , ref_fieldname of fieldcat but of no use. Anything apart from this will be highly appreciated.
Regards,
Dhwani

User might be changing the value to only 2 and you might have declared the fieldcat with 2-3 decimal places. If you enter value with decimals say 2.001 it will take.
Otherwise you need to replace it with char value as Nanda has suggested.
Hope it helps.
Thanks,
Jayant

Quantity field in ALV Grid

I am using KWMENG data element in my ALV grid which is a quantity field. In normal dialog programming this field does not allows entering characters in editable cells. But in ALV grid I am not able to restrict it from entering characters.
Eg: In VA01 if we try to enter any character "ABC...Z" then it wouldn't be typed in the screen. But when using the same data element in ALV grid iot allows to enter alphanumeric values. Since it's a quantity field so character value gives a short dump. I know I can restrict the dump by using "NA" in comparing string but I want to knw is there a way by which I restrict character field entry in alv grid, the same way this field works in VA01. I checked with a simple dialog prog and in that also it doesn not allows character typing in editable fields.

simple solution
mention the ref_fieldname and ref_tablename in the fieldcatalog for that column.
ex:
fieldcat-ref_fieldname = 'KWMENG'.
fieldcat-ref_tablename = 'VBAP'.

Quantity field in alv display

Hi all.
we are phasing a problem.
I am using alv to display in output.
I am using a Quantiti field (BDMNG),.
in this field if nodata is there then it is showing 0.000(that is the default value).
I don't want those zeros.I want only space(blank only).
Can any body help me to solve this issue.
Thanks in advance
Eswar.

Hai,
While building field catalog For quantity field Set the NO-ZERO attribute to 'X'.
Or you can change the quantity filed to character in the alv display.
Mark points if helpful.
Regards,
Umasankar

Is is possible to display quantity field in FBU3?

Hi,
Is it possible to display the quantity field in FBU3? We have activated the quantity field for FBL3N but not able to find the configuration to do it for FBU3.
Please guide.

Good Morning Everybody,
The above question still continues...
{Please Answer}

Is it possible to map the cmp fields of the entity bean with out dictionary

Dear sirs,
I have created the EJB project module and WEB Module. Now i have to map the CMP fields of the entity bean to the underlying table. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
I have got some error while mapping an EJB's CMP fields to the table through dictionary. I was actually intended to map 79 fields but it gives an error that more than 64 fields are not allowed while building the dictionary.
1. Can you tell me what could be the possible reason?
2. Is it possible to map the cmp fields of the entity bean with out java dictionary? If yes how can we do that.
Kindly helo me,
Sudheesh K S

Hi,
Sudheesh please check up if the below link helps,there are other ways of writing the persistent.xml for container managed entity bean.
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/f695f0c84acf46a4e0b31f69d8a9b7/frameset.htm, probably in the studio you cannot browse through tables not in the java dictionary,but manually editing it may still solve the problem.
Also here is another link that specifies the databases supported by J2EE Engine.
http://help.sap.com/saphelp_nw04s/helpdata/en/66/a5283eeb47b40be10000000a114084/frameset.htm
The below link shows how to specify the database vendor and datasource
http://help.sap.com/saphelp_nw04s/helpdata/en/e1/67fc3ee241ba28e10000000a114084/frameset.htm
Hope you are able to solve the problem.
Do let us know if you come up with the solution.
Regards,
Harish
Message was edited by: HARISH SUBRAMANIAN

Mapping a Quantity field

Similar Messages

Maybe you are looking for