Mapping failed

Hi,
I am getting below error in SXMB_MONI while processing an acknowledgement through a message mapping in PI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TX_MISSING_IMAP_CONT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Parameter container (ID = ) for interface mapping is missing An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
What could be the reason for such an error.

Hi Deepika,
Check out the thread : Re: PI 7.1 - TX_MISSING_IMAP_CONT
Thanks,
Pooja Pandey

Similar Messages

How to call the second mapping in the first mapping fails in the BPM

Hi All,
I have a scenario like this.
There are two mappings. There is a one condition while genearying the root element of the first mapping. If this condition is not satisfies the first mapping will fail. If this mapping fails i want to trigger another mapping.
How to achieve this functionality.
If it is possible with BPM. how to call the second mapping in the BPM.

Hi
you can not create the containter for the synchronous interfaces.
you have to craete the two asysnchronous abstact interfaces .
thenusing those two abstract interfaces you have to define the containers in the BPM.
and you also have to define the interface mapping b/w those two abstract interfaces.
once you define the interface mapping you will be able to select the interface mapping using the transformation step in BPM.
once you select the interface mapping in BPM then you will be able to selece the interfaces
if you still face the problenm please reply me back.
Thanks
Rinku Gangwnau

Fpga compilation xilinx error 'Process "Map" failed' - 'unroutable situation'

When I try to compile a Labview fpga project on our new system, it fails with the following error summary (the full Xilinx log is attached):
LabVIEW FPGA: The compilation failed due to a xilinx error.
Details:
ERROR:LIT:536 - IBUF symbol "aUserGpio<1>_IBUF" (output
signal=aUserGpio<1>_IBUF) has the attribute IOBDELAY set to value NONE and it
is driving an IODELAY. If the IOBDELAY attribute is on the driving PAD, it
has precedence over the IBUF one. Either the constraint or the design need
modification to prevent an unroutable situation.
Errors found during logical drc.
Design Summary
Number of errors : 1
Number of warnings : 349
Process "Map" failed
Start Time: 10:31:49 AM
End Time: 10:55:32 AM
Total Time: 00:23:43
Hardware:
NI PXIe-1071 Chassis
NI PXIe-8108 Embedded controller
NI PXIe-7965R FPGA FlexRIO FPGA module
NI 5761 250 MS/s 14 bit Analog input digitizer
Installed software:
Labview 2011 version 11.0
Labview FPGA module 11.0.0
FPGA compilation tools (Xilinx12_4)
NI FlexRIO Adapter Module Support 2.2.0
NI-RIO 4.0 (FlexRIO 2.1.0)
Xilinx DRAM compilation bug fix patch from NI article id 5E4FNCDP
Xilinx clock bug fix patch from NI article id 5GFAB7DP
replaces c:\NIFPGA\programs\Xilinx11_5\ISE\xilinx\lib\nt\libPlXil_Clocks.dll; The installed version is c:\NIFPGA\programs\Xilinx12_4-> Manually copied the dll to the installed version
The Project uses the 5761 low speed clip and a DRAM FIFO.
I tried to compile it before installing any patch, after installing the DRAM patch, and after installing both patches and always got a Xilinx error after ~10 minutes compile time. The error summary shown above and the attached Xilinx log are from compiling with both patches installed.
It compiled correctly on our older system:
Hardware:
NI PXIe-1082 Chassis
NI PXIe-8133 Embedded controller
NI PXIe-7965R FPGA FlexRIO FPGA module
NI 5761 250 MS/s 14 bit Analog input digitizer
Installed software:
Labview2011version10.0.0
LabviewFPGAmodule10.0.0
FPGAcompilationtools (Xilinx11_5)
NIFlexRIOAdapterModuleSupport2.1.0
NI-RIO3.5.1 (FlexRIO1.5.0)
XilinxDRAMcompilationbugfixpatchfromNIarticleid5E4FNCDP
Any help / suggestions greatly appreciated,
Fabrizio
Attachments:
XilinxLog.txt ‏1482 KB

Hi Torpedotown,
Can you tell me what version of FlexRIO Adapter Module Support you are using?
The 5761 Low Speed CLIP has a constraint that doesn't work properly with some versions of the compilation tools. In order to solve this you should be able to upgrade to our latest version of FAM support, or go change the constraint manually.
For the latest version of FAM support, go to http://ni.com/info and enter code "famsoftware"
If you've modified constraint files before and feel comfortable doing it yourself, let me know and I can provide you with the details on how to do that.
Thanks!
National Instruments
FlexRIO & R-Series Product Support Engineer

Mapping failing in sxmb_moni

Hi,
I am working on sceanario where the Idoc is coming from ERP system and in PI(which is on unix system), mapping is getting executed. In that mapping i am taking backup of the Idocs. In the Integration Directory i have provided the backup directory name as /usr/sap/put/ABCdefg/IDOC/ . In the integration Repository i have created the parameter as DirectoryName for that maaping and i have binded that parameter in the operation mapping as well. But in sxmb_moni this mapping fails because of the following exception
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RUNTIME_EXCEPTION</SAP:Code>
<SAP:P1>Thrown: java.lang.IllegalArgumentException: The va</SAP:P1>
<SAP:P2>lue for the input paramter DIRECTORYNAME must not</SAP:P2>
<SAP:P3>be null! at com.sap.aii.ib.core.mapping.execution</SAP:P3>
<SAP:P4>.InputParameter.<init>(InputParameter.java:23) a~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during mapping</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Detail trace is : <Trace level="1" type="T">The value for the input paramter DIRECTORYNAME must not be null! Thrown: java.lang.IllegalArgumentException: The value for the input paramter DIRECTORYNAME must not be null! at com.sap.aii.ib.core.mapping.execution.InputParameter.<init>(InputParameter.java:23) at com.sap.aii.ib.core.mapping.execution.MappingParameter.newInputParameter(MappingParameter.java:45) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createInputParameter(ParametrizationMap.java:134) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createElement(ParametrizationMap.java:112) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.createParametrizations(ParametrizationMap.java:57) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.<init>(ParametrizationMap.java:37) at com.sap.aii.ibrun.sbeans.mapping.ParametrizationMap.newInstance(ParametrizationMap.java:65) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:111) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:72) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy682_10000.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:269) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />

DIRECTORYNAME
This parameter is mandatory...or should not be null...check it...if u are using a UDF to assign value to it then check the UDF
Edited by: abhishek salvi on May 14, 2009 12:40 PM

Request message mapping failed in QAS server

Hi ,
I've transported the Developed objects from DEV Server to QAS Server using CTS method , now when i m making any changes in the development system and re transporting it back to quality server , its showing one or the other error ,
In one case it shows "Request message mapping failed" just we added one filed and mapped it. The filed can be seen in the repository but in the moni it says this filed is missing even though it is working fine in development, but in quality , i dont know why this problem is coming
The scenario is jdbc -
> xi ---> proxy,
this problem is only is quality , in dev its working fine
pl help , i running short of time ,
rgds
mojib

Ravi,
In test tab , both in message mapping and configuration , its successful but still this error..
rgds
mojib

RFC Lookup's in message mapping fail with RuntimeException for no reason

Hi guys,
We have developed interfaces that execute a lot of RFC's from Message Mapping, by making use of RFC Lookup API.
In ID, in the corresponding RFC Receiver Communication Channel we have set the number of maximum connections to 100.
However, when a big number of Idocs with lots of items is sent to XI some messages fail in XI because mapping fails with a runtime exception that is not correct, since there is a return value found from the execution of the RFC function. And when I am testing the mapping in Test mode of XI IR, the mapping is executed successfully.
Do you think that by increasing the maximum number of connections in Communication Channel, it will take effect?
Evaggelos

Hi Evaggelos,
DECREASE, may be til 10.
Regards,
Udo

Is it possible to Sending a mail when Mapping fails ?

Hi,
I am using the BPM for my scenario. In that BPM , I am using the message transformation , currently when the mapping fails the entire process stops.
Instead of this I want to send a mail.
Thanks in advance
Chemmanz

Hi Chemmanz,
Sorry for the delailed response. Here is some explaination.
Wrap you transformation step in an exception handler.
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f6/e1283f2bbad036e10000000a114084/content.htm
In the exception handler have a control step - type mail. Here you can specify any custom message.
after the mail control step , you can either exit BPM using control step - type exit or continue with the BPM.
cheers,
naveen
cheers,
Naveen

Flash builder 4.5.1 ios build fails with error map failed

I have built several test app with flash builder 4.5 and now 4.5.1. I am working on an app for ipad, but when I run a test build it runs for several minutes as if it is going to create the ipa, but then error out and displays the following error message:
message title: Problem occured
'Launching [name of configuration] has encountered a problem.
Error occurred while packaging the application:
Map failed
that's it, no other reference. I have searched for any reference to this problem and haven't been able to find one. When I first packaged a much simpler version of the app, it created an ipa just fine.
Can someone help me.
Thanks

When I was try to build a debug iOS version, I got this error, too.(release version is ok)
For the project I was use Flex SDK 4.5.1 and AIR 3 SDK.
blew is the log, I copyed from {flash builder workspace}/.metadata/.log
!STACK 0
java.lang.Exception
          at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1010)
          at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
          at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
          at com.adobe.flexide.multiplatform.ios.packaging.IPAPackager.create(IPAPackager.java:220)
          at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.doPackage(IOSOnDev iceLaunchHandler.java:283)
          at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.launch(IOSOnDevice LaunchHandler.java:181)
          at com.adobe.flexide.launching.multiplatform.MultiPlatformLaunchDelegate.launch(MultiPlatfor mLaunchDelegate.java:180)
          at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:238)
          at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:132)
          at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:853)
          at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:702)
          at org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:923)
          at org.eclipse.debug.internal.ui.DebugUIPlugin$8.run(DebugUIPlugin.java:1126)
          at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
!ENTRY com.adobe.flexbuilder.project 4 43 2011-11-22 22:10:54.816
!MESSAGE Error occurred while packaging the application:
Map failed
even I try to change sdk with FLEX 4.5 and AIR 2.6, the error was still here.
And I try to build debug project in Flash Pro. It was OK.
So I think it was an flashbuilder bug.
My project only 137Megabytes

Upgrade to 10.1.0.4 owb and 10grl2 db - mapping fail

Hi,
Have recently upgraded owb from 10.1.02 to 10.1.0.4 and db from 9.2 to 10.2 and now am getting a mapping failing with ORA-00972: identifier is too long. The sql in the cursor being generated is failing, have tried to reduce operator field names but with no luck. Any ideas ????
Cheers,
Brandon

I had the same problem.
The problem is related the length of the database link
for one of the test data tables.
You have, for that test data, to use the button that creates a
new database link, use a shorter name and use it.
Regards,
Joao Noronha

Error status code 400 with the description Message mapping failed

Hi,
I tried to build RFID outbound scenario using ECC 5.0, XI and AII 2.1.
When I send IDOC message:AIDOPMSG.AIDOP01 from ecc 5.0 to XI(ouput message type is OperationalIn and message mapping is OperationalInTo), i get following error:
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>Message mapping failed</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Message mapping failed</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 400 with the description Message mapping failed Boundary SAP_57D7D47469E09543A1EA0002CBDA0492_END could not be found</SAP:Stack>
I am using standard AUTO-ID 2.1 XI contents. If any of you have encountered such error message, then could you please help me understand the meaning and how to fix it.
thanks in advance,
Ashit

hi Ashit,
take a look at my weblog on how to test your mapping:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
maybe with this you'll be able to find out the error
Regards,
michal

File Mapping Failed

I have a laptop 3000 N100 with XP. I keep getting an small error screen that pops up on the desktop several minutes after the laptop starts up indicating "File Mapping Failed". How do I correct this error?

Laptop is used at both office and home. Regardless of whether it is comnnecting to a network or used as a stand-alone computer, the file mapping error screen displays a few minutes after start-up. I have also noticed that files open slower and the "File Save As" command is very slow. I found one solution on the Internet to update the bios but the update procedure failed.

Error compiling for IOS "map failed"

Since i have installed Flash Builder 4.6 I allways get an error when I compile for Device "Map Failed".
Compiling for Desktop works fine. When I used Flash Builder 4.5.1 I had sometimes the same problem,
but sometimes compiling worked.
here is the logfile:
!ENTRY com.adobe.flexbuilder.project 4 43 2011-12-07 12:16:06.832
!MESSAGE Map failed
!STACK 0
java.lang.Exception
    at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
    at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
    at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
    at com.adobe.flexide.multiplatform.ios.packaging.IPAPackager.create(IPAPackager.java:276)
    at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.doPackage(IOSOnDev iceLaunchHandler.java:314)
    at com.adobe.flexide.multiplatform.ios.launching.IOSOnDeviceLaunchHandler.launch(IOSOnDevice LaunchHandler.java:185)
    at com.adobe.flexide.launching.multiplatform.MultiPlatformLaunchDelegate.launch(MultiPlatfor mLaunchDelegate.java:191)
    at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:244)
    at com.adobe.flexide.launching.AbstractFlexLaunchDelegate.launch(AbstractFlexLaunchDelegate. java:134)
    at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:854)
    at org.eclipse.debug.internal.core.LaunchConfiguration.launch(LaunchConfiguration.java:703)
    at org.eclipse.debug.internal.ui.DebugUIPlugin.buildAndLaunch(DebugUIPlugin.java:928)
    at org.eclipse.debug.internal.ui.DebugUIPlugin$8.run(DebugUIPlugin.java:1132)
    at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
!ENTRY com.adobe.flexbuilder.project 4 43 2011-12-07 12:16:07.520
!MESSAGE Fehler beim Verpacken der Anwendung:
Map failed
What can I do ?

I am getting a similar error when exporting a release build for ios.
It seems to be caused by the number of assets I include in the project. If I remove all of the video assets from the package it builds a working release. When the video assets are included, it fails to export the release build with the error "map failed".
So it seems to be the number of assets included or the total size of the included assets that causes the error for me. But I can't find a way around it so can't currently export a release build with all the required assets.
I'm starting to wonder wether I'm going to have to write some kind of "updater" to download all the required assts to the iOS device when the app is first run, which isn't ideal.

ZID-FBID Mapping Failed error ocurred when trying to send requests to friends in Castleville game on facebook?

A box popped up after I clicked on my friends names who I wanted to send requests to for help in the facebook game Castleville~the entire message inside the box reads as follows:
''''''ZDVIRALMANAGER--ONREQUESTDONE--ERROR!'''''
'''ZID-FBID Mapping Failed.''''

Try to start Firefox in [[Safe mode|Safe mode]]. This mode disables all extensions, user customizations, hardware acceleration, etc. temporarily for diagnostic and troubleshooting. If Firefox works find in Safe Mode, then this is likely an add-on issue. Restart Firefox in normal mode, then type "About:addons" (without the quotes) in the address bar. Disable your extensions one by one, restarting Firefox between each one, until you find the trouble maker. Once you do, you can disable that add-on and report the issue to that add-on's developer.
A few other basic trouble shooting things you can try is this:
Run all Windows Updates, install all needed service packs, etc.
Update your graphics driver (Firefox uses your graphics card for some rendering, and an out of date graphics card driver can cause problems. [https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers].
Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. You can uninstall this program after you clean off any infections.

Ios 6 maps fail really hard

It was already known that 6 apple maps failed to provide its major services such as some cities are not presented on map.
I am not sure this is only problem with my 4s but there are definitely major failures in this app.
I recently traveled to New York, and attempted to use it for finding destinations.
It could not even accurately locate where I was and took so long time to do so if it finally located my position.
I understand the failure on geographical parts: they might need more time to collect relevant data, but hey
this map is not even able to find where I am? then what is whole point to use this app?
I am still not sure why apple shipped this product without checking it more clearly.
maybe they did but failed to test it out some cases?
Plus this app brain 4s battery like crazy -- 1% for a min???
so lets say i want to travel seattle to san francisco with this app on for navigation purpose.
It wont last 2hrs if you use it continuously, then why would some one wants to use this??
without solving battery issue and gps location accuracy, not worth to use it.

It was already known that 6 apple maps failed to provide its major services such as some cities are not presented on map.
I am not sure this is only problem with my 4s but there are definitely major failures in this app.
I recently traveled to New York, and attempted to use it for finding destinations.
It could not even accurately locate where I was and took so long time to do so if it finally located my position.
I understand the failure on geographical parts: they might need more time to collect relevant data, but hey
this map is not even able to find where I am? then what is whole point to use this app?
I am still not sure why apple shipped this product without checking it more clearly.
maybe they did but failed to test it out some cases?
Plus this app brain 4s battery like crazy -- 1% for a min???
so lets say i want to travel seattle to san francisco with this app on for navigation purpose.
It wont last 2hrs if you use it continuously, then why would some one wants to use this??
without solving battery issue and gps location accuracy, not worth to use it.

How to know if Message mapping failed?

Hi gurus,
do anyone know how to determine in clean up method if a message mapping failed? i just want to know the status of the message mapping to put it in the trace.
Regards

Thanks for your reply Abhishek,
but this is not exactly what i need.
Suppose following Graphical message mapping: two number A and B need to be divided, A/B. If B equal 0 (zero), this will throw Runtime Exception. In some point of my mapping (maybe at the end of it) i need to catch this Exception, or at least i need to know exception happened. I need to know it to update a table with message mapping status, eg succesfully executed, runtime error, etc.
Regards.

Flash Builder 4.6 compile "Map Failed" error

HI，all
    First，Adobe have no place for bug report . Yes,you will say http://bugs.adobe.com/jira/secure/Dashboard.jspa ,but ,i have no account, also doesn't know how to register one.
OK ,Today..i will compile an mobile project have 1.5G+ pictures and swfs ..
i met a "Map failed" error when i make a IOS Package..
The .log file content is :
!ENTRY com.adobe.flexbuilder.project 4 43 2012-03-15 02:08:09.404
!MESSAGE Map failed
!STACK 0
java.lang.Exception
          at com.adobe.flexbuilder.project.internal.FlexProjectCore.createErrorStatus(FlexProjectCore. java:1019)
          at com.adobe.flexbuilder.util.logging.GlobalLogImpl.log(GlobalLogImpl.java:66)
          at com.adobe.flexbuilder.util.logging.GlobalLog.log(GlobalLog.java:52)
          at com.adobe.flexide.multiplatform.ios.packaging.IPAPackager.create(IPAPackager.java:276)
          at com.adobe.flexide.multiplatform.ios.exportrelease.IOSExportReleaseHandler.doPackage(IOSEx portReleaseHandler.java:264)
          at com.adobe.flashbuilder.project.multiplatform.ui.exportrelease.MultiPlatformExportReleaseV ersionManager.doExport(MultiPlatformExportReleaseVersionManager.java:198)
          at com.adobe.flexbuilder.exportimport.releaseversion.ui.ExportReleaseVersionWizard$1.run(Exp ortReleaseVersionWizard.java:208)
my hardware:
G41 MotherBoard + 8G RAM + E7200CPU
My software:
windows 2008 r2 with sp1 (64bit)+ FlashBuilder 4.6           default config ,very clean system, just install today.
And , i transfer my project to a Windows XP host ...Oh, My god .....it works , the IOS package produced normally.
SO......so.......i cann;t say any word now .....is adobe hate windows 7 (32bit,i tested ,same problem ) and Windows 2008??
Raymond

I constantly had issues with this. I managed to run into the max for increasing the heap space. I was able to get beyond the limit by flagging the FlashBuilder.exe file to allow it to allocate to higher memory address ranges. I'm on a 64 bit machine, so the only limitation was the 32 bit FlashBuilder process. Anyways i was able to get from 1024m up to 1720m. Also note that FlashBuilder 4.7 Beta is out and it is a native 64 bit application, so you will get higher addressing there. I just found it to be too buggy for my every day development tasks. Also missing the Design view really hurts development. I hope they put that back in.
Here's more detail on how I got beyond the java heap ceiling.
http://chrsmrtn.azurewebsites.net/flash-builder-java-heap-errors-limitations-of-xms-and-xm x/

Mapping failed

Similar Messages

Maybe you are looking for