Mapping from purchase order to idoc

Hello,
Can anyone tell me how a PO is mapped to an IDOC?
We are having an issue where the "Quantity Tag" appears on the PO but it is not translated to the PO's IDOC.
Thanks,
Matt

Hi,
For finding the IDOC number corresponding to the PO, use transaction BD87. Give the Business object as BUS2012 and business object key as the PO number. You can find the IDOC number.
Using that IDOC number, in WE19 you can try to recreate the IDOC. This will help you to find the issue.
Reward points if helpful.
Thanks and Regards,
Lakshmi.

Similar Messages

Create Sales order from Internal Purchase Order using IDOC

Hello Friends,
I have requirement to create Sales Order from Internal Purchase Order Using IDOC.
Backgorund, we have already configured IDOC orders05 to create Sales Order from external Purchase order from Inbound IDOC, and it is working fine.
Now we have new requirement to create Sales Order from our own Purchase order, i.e. When PO is created in one plant corresponidng sales order automatically must needs to create in another Plant with respect PO.
I m trying to design a solution for above problem as follows,
1.create an Inbound Idoc from PO, by creatiing one new message type on PO save.
2.Process that Inbound IDOC same as it is from external PO.
3.Once processed Sales order will create.
Please help me in step 1. to create Inbound IDOC from PO.
If you want any further clarification please write me.
Thanks,
Mahesh

I had done a similar scenario before and we achieved it through SAP XI. The problem is with the control record. When we create a ORDERS IDOC from a PO the control record will be for outbound transmission. We sent the file to XI and XI resent it back with some data parsing and a new inbound control record. This way it went neat outbound and inbound.
I'm not sure what kind of architecture you have. If you have to do it within your ECC/R/3, then you could create the outbound IDOC to a new port and write a fresh RFC to pick it up from the same folder and create a new control record for inbound processing.
I haven't tried this; but there is a "processing w. trigger (inbound)" option on the outbound process code. May be you can explore into that a bit more.
I'm sure there could be better approaches to handle this within ECC so if you stumble on any, do write back. I would like to know to update my knowledge .

Text copy from Purchase Order to Inbound Delivery

Dear All,
We would like to copy header texts from purchase order to the inbound delivery document.
I could not found the customizing point copy-rules for theses documents.
Is this possible and where have we to configure it?
Thank you.
Best regards,
Thomas

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Purchase Order Outbound Idoc issue. Message Type ORDER

Hi Experts,
I am having issue with outbound IDoc generated from Purchase Order.(Message Type ORDER and Basic Type ORDERS05)
Issue is when i create PO idoc Segment E1EDP01 and field ACTION populates as 001 this works fine.
Now when made any changes to the purchase order.* PO trigers one more EDI - Idoc. but the ACTION field is stil as 002.*
Could any tell me how to fix this.
Cheers...Gopinath.

Hi,
Thank you.
I have found the issue and fixed.
Below three setting was missing same has been done in Partner Profile now ok.
Message type u2013 ORDCHG, Processing Code u2013 ME11 and Change flag On.
Cheers..Gopinath
Edited by: Gopinath A.R on Oct 8, 2009 3:14 PM

Is there is a way to have a link from purchase order to cost center report.

Is there is a way to have a link from purchase order to cost center report.
I am meaning kind of:
Standard way to customized this link?
or
User exit to have this link in place
or
Any other solution
Thanks

For me it does not make any sense from going from PO to cost center report.
However, if you want to see the purchase order cost incurred with a cost center, execute KSB1 report. Within the layout, bring "Purchasing Document" field, where you can see the purchase order number in cost center line item report.

A report to view the cash flow coming from Purchase Orders.

Hi All,
Could anyone suggest me a report to view the financial obligations which comes from Purchase Orders?
Thanks
Gandalf

Hi,
You will have to activate basic cash management (part of FSCM) and use TCode FF7B (liquidity forecast). What the report would do is, based on the delivery date of the purchase order and the payment terms of the vendor (plus some grace days for clearing the payment as per configuration) determine the date of expected payments and project the cash (and bank) balance by days/week or months.
Alternatively you can write your own ABAP code which will do the same thing.
a. Take a list of all open POs and determine the delivery date (EKKO and EKPO)
b. Add the payment terms as per purchase order to the delivery date
c. Compute the cost of the purchase order item
d. Display the report which projects expected payments by date
Rgds
Shivram.

A report to view the cash flow from Purchase Orders.

Hi All,
Could anyone suggest me a report to view the cash flow (financial obligations) which comes from Purchase Orders?
Thanks
Gandalf

Hi,
You will have to activate basic cash management (part of FSCM) and use TCode FF7B (liquidity forecast). What the report would do is, based on the delivery date of the purchase order and the payment terms of the vendor (plus some grace days for clearing the payment as per configuration) determine the date of expected payments and project the cash (and bank) balance by days/week or months.
Alternatively you can write your own ABAP code which will do the same thing.
a. Take a list of all open POs and determine the delivery date (EKKO and EKPO)
b. Add the payment terms as per purchase order to the delivery date
c. Compute the cost of the purchase order item
d. Display the report which projects expected payments by date
Rgds
Shivram.

Error while creating work order from purchase order

Dear All,
We are having a subcontracting scenario where we are creating a Work order from PO but getting the below error.
Error - "No master data assigned to partners-locations-product combination."
Done all the setting mentioned in the below thread but the error still persist.
Error in Generating Work order from Purchase Order
Any suggestions on which master data we need to check?
Thanks,
mahesh.

Hi Mahesh
In the below transaction
/SCA/MFGCFG - Work Order Configuration
Can you maintain Master data Assigment properly
Valid From
Valid To
Active---Checked
Can you please list what you maintained
Regards
Vinod

No update of sales order from purchase order

Hi,
When I am trying to change the delivery date of a purchase order line item, I get the error
"No update of sales order xxxxx from purchase order (error V1 348)" How can I resolve this?
Sincerely,
Ketan

Hi,
Check whether this PO is created w.r.t. PR and PR is created automatically during Sales order creation.
If it is so then need no to change the delivery date in PO, it will always get updated as per the Schedule Line date of sales order.
You can go for GR w.r.t. PO directly.

Goods receipt with Zero Quantity from Purchase Order

Dear Expert,
Is this a policy or something in SAP system?
Why I can MIGO with Zero Qty from Purchase order that still open quantity?
Best regards,
Dedy

Dear all,
Thanks a lot for all replies.
Dear Thiru,
First thing, all system message i have set error, M7 061 Document does not contain any items
M7 264 Qty and / or "delivery completed" ind. or final issue ind. are missing.
Scenario :
PO not yet tick delivery completed (open quantity), when we doing MIGO w/ zero qty and set delivery completed indicator to --> 2 Set, a document GR is posted w/ zero quantity.
Also when PO already tick delivery completed, but when MIGO and set delivery completed indicator to --> 3 Do not set, a document GR is posted w/ zero quantity.
Is this a way that SAP provide to tick delivery completed after PO final release w/ status not changeable so we do not need to cancel release or something like a bug/backdoor?
Best regards,
Dedy

"All items from purchase order cannot be invoiced"

Hello, 
 
I'm on a SRM 7.0 SP 5 system (ext-classic scenario). Here i try to create an invoice with reference to a Purchase Order, but none of my Purchase Orders can be used for reference. I get the following warning message 'All items from purchase order cannot be invoiced'. 
 
- Created via POWL (create with reference -> invoice/credit memo) i always get the warning message 'All items from purchase order cannot be invoiced'. And no items are converted / can be used for invoicing. Additionally when i use the search option 'find purchase order' within the create invoice transaction i can not find any purchase order to use, it shows 'There is no search result' while there are plenty purchase orders marked with 'invoice expected'. 
 
I am able to create invoices without reference. 
 
I tried vendors set up only for 'invoice expected' and 'GR', 'invoice expected' / 'GR' / 'GR-based-IV' and 'invoice expected' only none of them works, indicators set on vendor master are correctly used on the created purchase order. Outputting PO doesn't make any difference neither. 

I have not set up the following (do i need to?): 
- Deactivated the 'CRME' transaction type, no Credit Memo transaction type has been configured/is active. 
- I have not defined the 'INV' transaction type as a follow-on document for my ECPO transaction type within the define transaction type transaction. 
- Tollerances 
 
edit -> i've already searched thorougly for SAP notes but no note seems to cover this particular problem. 
 
Help is very much appreciated

Solved! Added SYS attribute for back-end system in organisational scheme.

Down payment Request from purchase order (me21n)

We need Down payment Request automatically created as per payment terms from purchase order screen.(ME21N)

no answer

Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note)

Hi Experts
I was looking for Customisation settings for VC Configuration copy from Purchase order to GRN(Goods Receipt note),
Please share.
Regards
Sandeep

Hi Ritesh
Thanks for your reply,
I checked both of these transaction we need to select 3 option Characetrstics frm configuration(prio) and classification. I will check that, I had one more question
In PO VC configuration is called for class type-300 and in GRN VC configuration is called for class type -023. How it will fetch the variant class configuration to Batch class configuration?
Once we had faced some issues the copy from PO to GRN was happening for some batches & some batches it was not happening.
yes we have activated Mill Functions in our ERP box.
Regards
Sandeep

Not to include item from purchase order to the delivery order

Hi,
i need some guidance on above topic. The user requested to have the functionality not to include the item from purchase order to delivery order when the item having order balance quantity more than the available stock.
In other words, if a PO contains several items, those order balance quantity which is more than the available stock will not be included in the DO.
is the above scenario possible?
please advise.
Thanks.

Hi Yue ,
u can do it , but in this case u have to make use of user exit or BADI.
option 1 .
by using user exit , u can delete/change picking/confirm qty .
option2:
while doing the PGI , do can cross check stock avail with PO qty and raise error messages.
LE_SHP_GOODSMOVEMENT --> see its documentations in se18.
Regards
Peram

Table links from Purchase order to condition types

Hi,
I am looking for the tables to go from purchase order, and to read the conditions associated with the PO.
I have EKKO, and EKPO, but I cannot find the table where the condition information is stored. I have KONV and KONP, but they seem to be the tables where the condition type info is stored, not the link table where the purchase order specific information is stored.
Can somebody please point in the right direction?
Regards
Piet
Edited by: Piet Strydom on May 12, 2009 12:52 PM

Hi,
The PO and the Condition Record Number Link happens in the Table EKKI.
from this table get the condition Record number line item wise and execute in KONV.
Hope so it helps
Regards
Anjanna
you can check the below thread posted by self for further ing
Re: PO item Condition Record number and delivery address of PO - Need a table n
Edited by: Shiva Rajanala on May 12, 2009 1:42 PM

Mapping from purchase order to idoc

Similar Messages

Maybe you are looking for