Mapping is not executed in runtime

Hi All,
i am doing a scenario
1)file to idoc
2)idoc to idoc
in the two scenarios we are geeting the same idoc error 56.
partner profiles are maintained and ports and rfc destinations are also maintained.
but why this error is coming we are not understanding.
2)when i run the message mapping ,it is executed in IR, but in end to end scenario it is not executed.
Please suggest.
Regards,
reddy

Hi
This error generally happens when we dont properly maintain below details.
Please check you have defined Sender System port in Receiver System.
Tcode WE21 - give port name and give RFC destination(i.e connect your Sender System)
then send IDOC
Regards
Pothana

Similar Messages

Interface Mapping does not exist in runtime cache

Hi,
I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
Regards
Scharlotte

Hi...
Try to re-create the Interface mapping.
And also test your Configuration with test tool where you can find the error on which step.
if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
u can follow this blog for how to test configuration part:
Test Your XI Configuration With The New Test Tool
Regards,
Parvathy

Error : Interface mapping does not exist in runtime Cache

Hello Guys
I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
but the data is not getting transfered from one point to another.
I checked SXMB_MONI and saw the following error:
Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
But still has the same problem.
Can some one help me with this? I would really appreciate it.
Thanks
Ram

Hi,
We too faced the same problem.
Do the following
1) Delete the Interface mapping and re-create it
2) First test your Config with test tool
/people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
I think here you will find the error on Interface mapp or Receiver agreement
Then delete the interface det and receiver agreement also and re-create those.
Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
Then finally u will get the success
Regards
Seshagiri

Built is not executing in Runtime

Hello,
i have to PCs. One with LV 2013 to develop and create exe-files and a second PC with only Runtime installed.
Just now i tried the first time to execute a fresh built exe-file and got this popup:
But in my Windows 7 64bit under software i see that it is installed:
What is the problem?
I installed "LVRTE2013_64bitstd.exe" or is this the wrong runtime as my Labview-version is LabVIEW 2013 SP1 (32-bit)
Thanks for help
Solved!
Go to Solution.

All that said, the error message in the first picture should mention the word "32bit" to avoid confusions like this!
Why doesn't it???
LabVIEW Champion . Do more with less code and in less time .

Badi does not execute at runtime

Hello All,
We are having a problem trying to implement BADI BBP_CATALOG_TRANSFER with method ENRICH_ITEM_DATA / interface IF_EX_BBP_CATALOG_TRANSFER
We have created a new implementation for this BADI that has generated a new class (in se19). The implementation is visible in V_ext_act and the class and implementation is visible in SXC_CLASS.
The implementation is active, the class is active and the class has the correct method IF_EX_BBP_CATALOG_TRANSFER~ENRICH_ITEM_DATA
However
When performing a where used list for this BADI our new implementation does not appear. Instead we are still seeing an old implementation that has been deleted. In addition the source code that we have implemented as part of the exit is not being executed during run time.
We think that we have covered all the steps required but may be missing something vital ???
I know this is a tricky one but any help would be greatly appreciated.
Thanks very much in advance
Regards
Ketan

Hello
Just wanted to add that in addition to our custom implementations, the class implementation
CL_EX_BBP_CATALOG_TRANSFER
is also associated with this BADI in the where used list.
When I look at this in our QA environment this class is not associated only the custom developed classes are associated.
Not sure why?
Any ideas would be appreciated..
Regards

Interface mapping Object does not exist in runtime cache

I am getting the following error after importing IR into our test system (PI7.0 SP10).
Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 . However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
I cannot change the mapping and reactivate - as this cannot be changed.
I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
The mapping is there and I can test it in the IR.
Any thoughts?

I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
CALL FUNCTION 'ZMY_FM'
 IN BACKGROUND TASK
 DESTINATION 'PI_DEST'
 EXPORTING
 t_file = lt_file.
COMMIT WORK.
Don't forget the commit work here.
Hope this helps.
Cheers
Jens

XSLT for adding Namespace is not being executed at runtime

Hi Gurus,
I am trying to add a Namespace to inbound xml and I wrote a simple XSLT mapping as below, when I execute this using XML spy or in Operation mapping manually it is working fine and giving me output as expected but at runtime it is not executing, I am getting same input xml as output xml and receiver agreement is failing...
Appreciate your thoughts..
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
 <xsl:output method="xml" encoding="UTF-8"/>
 <xsl:template match="*">
 <ns0:SalesXmlExtended xmlns:ns0="urn:/company.com/H/sndr">
 <xsl:copy-of select="//SalesReportInfo"/>
 </ns0:SalesXmlExtended>
 </xsl:template>
</xsl:stylesheet>
input xml is as below....
<?xml version="1.0" encoding="UTF-8"?>
<SalesXmlExtended>
 <SalesReportInfo>
 <SalesReport>
 <Detail>
 <deptNum>0270</deptNum> etc...
output I am getting in XMLSpy and OM is as below, this is exactly what I need...
<?xml version="1.0" encoding="UTF-8"?>
<ns0:SalesXmlExtended xmlns:ns0="urn:/company.com/H/sndr">
 <SalesReportInfo>
 <SalesReport>
 <Detail>
 <deptNum>0270</deptNum>
Thanks...
Sukarna...

Hi Baskar,
Yeah, that is what my issue is , it shouldn't be failing but it is...
I tried by manipulating the required namespace in the input file and it is working fine with out any errors....so I am guessing the XSLT is not being executed...
I am getting below error which is valid because the transformation is not happening
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?> <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>
<SAP:P1>-BS_HOUSE_OF_FRASER_DEV</SAP:P1><SAP:P2>-BD1_100,urn:.com/HoF/POS/EOD/sndr.SI_Out_HoFSales_XML</SAP:P2>
<SAP:P3/>
<SAP:P4/>
<SAP:AdditionalText>No standard agreement found for , BS_HOUSE_OF_FRASER_DEV, , BD1_100, urn:/HoF/POS/EOD/sndr, SI_Out_HoFSales_XML</SAP:AdditionalText
><SAP:Stack>Problem occurred in receiver agreement for sender -BS_HOUSE_OF_FRASER_DEV to receiver -

Map not recognized during runtime

While running a test (during runtime), the map is not being recognized
by the system. We have cleared SLD Cache in IR and ID, and using
SXI_CACHE several times and during runtime we still get the following
error about the map not being found. The error is as follows:
Runtime error Unable to find resource a1ebddd0-0d05-11dd-a1d7-
eecb0a0a3d7e in the following software component versions:
urn:ariba.com:xi:Procurement:CreatePurchaseOrdercom/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestM~-1
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
<Trace level="2" type="T">......attachment XI_Context not found </Trace><Trace level="3" type="T">Mapping already defined in interface
determination </Trace>
<Trace level="3" type="T">Object ID of Interface Mapping
15D05B740F5D39BCBACC32BCA4E1FCE7 </Trace>
<Trace level="3" type="T">Version ID of Interface Mapping
A1EBDDD00D0511DDA1D7EECB0A0A3D7E </Trace>
<Trace level="1" type="T">Interface Mapping
urn:ariba.com:xi:Procurement:CreatePurchaseOrder
IFM_TX_WSPurchaseOrderPush_2_Z_ARIBA_KT_PO_CREATE </Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_ </Trace>
<Trace level="3" type="T">MTOM Attachments are Transferred to the
Payload </Trace>
<Trace level="3" type="T">Dynamic Configuration Is Empty </Trace>
<Trace level="2" type="T">Mode 0 </Trace>
<Trace level="3" type="T">Search
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class
(urn:ariba.com:xi:Procurement:CreatePurchaseOrder, -1) in swcv a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e. </Trace>
<Trace level="3" type="T">Search
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class (-1) in swcv a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e
without namespace. </Trace>
<Trace level="1" type="T">Unable to find resource
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class in the following software component versions:
a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e
Thrown:
com.sap.aii.ib.core.mapping.execution.ResourceNotFoundException: Unable
to find resource
com/sap/xi/tf/_MM_TX_WSPurchaseOrderPush_RequestMessage_2_Z_ARIBA_KT_PO_CREATE_REQUEST_.class in the following software component versions:
a1ebddd0-0d05-11dd-a1d7-eecb0a0a3d7e
at com.sap.aii.ib.server.mapping.execution.JavaMapping.load
(JavaMapping.java:148)
at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep
(JavaMapping.java:67)
at com.sap.aii.ib.server.mapping.execution.Mapping.execute
(Mapping.java:60)
at com.sap.aii.ib.server.mapping.execution.MappingHandler.map
(MappingHandler.java:87)
at com.sap.aii.ib.server.mapping.execution.MappingHandler.map
(MappingHandler.java:71)
at
com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:119)
at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest
(MappingRequestHandler.java:72)
at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction
(MappingServiceImpl.java:79)
at sun.reflect.GeneratedMethodAccessor511.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:46)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke
(Interceptors_Resource.java:71)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16)
at
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133)
at
com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164)
at $Proxy279.processFunction(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke
(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke
(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:183)
at
com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:267)
at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:182)
at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:280)
</Trace>
<Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>

In which system you are facing this problem?
If it is Developement system then do the following steps and then try again.
1. In your interface mapping remove the message mapping first and then activate the interface mapping.
2. Do some dummy change in your message mapping or rename the message mapping by copying it and activate it.
3. Now use this message mapping in your interface mapping and activate IM.
If it doesn't work delete all objects and recreate them. (or may be rename them ).
One more important thing... Check your Interface Determination and make sure the outbound & inbound message interfaces are exactly same as used in Interface Mapping.

Runtime.exec not executing the command !

Hi all,
I'm connecting to Progress Db thru JDBC trying to execute a stored procedure
which has a statement
Runtime.exec("ksh -c aa") where aa is aunix script which i'm trying to run from java snippet .
when i run this code as a seperate java program it executes the script
"aa" but thru JDBC connection it does not execute the command
what could be the reason ???
thanx in advance,
Nagu.

Hi Rick,
"aa" is the shell script which is lying in the user DIR .
It is returning a non-zero value. what kind of permissions be there for to execute the Shell command?
Regards,
Nagarathna.

NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache

Hi,
I have a SOAP to RFC scenario. Where the source is a service interface and target is ZBAPI. When I test this interface I get
'NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache' error.
I have tried the following things but none worked.
1. Checked the Message Mappings and reimported it in the Operation Mapping.
2. Deleted and created the Operation Mapping again.
3. Cleared the SLD Cache.
4. Performed the Complete Cache Refresh from SXI_CACHE.
5. Reimported the ZBAPI.
6. Deleted all the IR and ID objects and created it once again after performing the Cache refresh.
Note: I had one observation that the newly created Operation Mapping object had the same object ID as that of the deleted one.

Hi experts,
I have a SOAP to RFC scenario. Where the source is a service interface and target is ZBAPI. When I test this interface I get
'NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache : Object ID <ID of Operation Mapping>' error.
I have tried the following things but none worked.
1. Checked the Message Mappings and reimported it in the Operation Mapping.
2. Deleted and created the Operation Mapping again.
3. Cleared the SLD Cache.
4. Performed the Complete Cache Refresh from SXI_CACHE.
5. Reimported the ZBAPI.
6. Deleted all the IR and ID objects and created it once again after performing the Cache refresh.
Note: I had one observation that the newly created Operation Mapping object had the same object ID as that of the deleted one.
The ZBAPI is a wrapper for a standard BAPI with Request, Response and Exception as a structure.
Can anyone please highlight on the above issue also please consider the note above.
Regards,
Rohit.

UWL Task does not execute.........Gives Portal Runtime Error

Hi,
I completed UWL configuration.Some tasks execute properly but some tasks not execute it shows error like...
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/uwl/com.sap.netweaver.bc.uwl.uwlSapLaunch
Component Name : com.sap.portal.appintegrator.sap.Transaction
Exception in SAP Application Integrator occured: Application URL ':///sap(ZT1qRnRCaDZMVzlyX2llTjRJZTRGcXp3LS1NTzJqNlpibU42bkFwTzZaejdObTZ3LS0=)/bc/gui/sap/its/webgui' is not valid! Please check the protocol and host entries for system 'B07CLNT100_GB'..
Exception id: 05:50_27/12/07_0020_7205750
See the details for the exception ID in the log file
Please help me out to correct this problem.
Regards,
Gurprit Bhatia

Activate below services in ur back end systems
With transaction SICF and locate the services by path
sap/bc/gui/sap/its/webgui
Activate the full path to these services
with the context menu.
goto SE80
Locate the Internet Services
SYSTEM
Publish these services with the Context
Menu -> Publish -> Complete Service
and also WEBGUI
Publish these services with the Context
Menu -> Publish -> Complete Service
Regards
Krishna.

VI seen as not executable from LV runtime, correct in LV development

My current problem is the following:
On the same PC, having TestStand 4.0 & LabVIEW Development 8.5, I try running a sequence with both adapters: LV development 8.5 and LV runtime 8.5.
My sequence steps call VIs that call subVIs in a full hierarchy (let's say 1500 VIs are involved in a test sequence).
The sequence runs with the development adapter, and with the runtime, I got a -18002 LabVIEW error: Vi not executable, broken, etc.
Of course, when I open the VI within the development environment, everything is correct.
As I'm testing both adapters on the same PC, the full hierarchy, including LV libraries provided with LV development are at the same location.
Due to the large amount of VIs I use, I cannot guess which LLB could be missing or not inaccessible.
Is there a way to investigate the cause, despite the fact that everything is correct under the development environment?
Is it possible to tell the LV runtime where it should search for LLBs or other required dependencies that the LV development seams able to find?
Thanks in advance for your help,
JJD
Solved!
Go to Solution.

Hello,
I've seen this error when two VIs withthe same name were loaded in memory; this VI was called from a TestStand sequence and from the user interface (very poor design of a customer that I will not mention ^^).
I'm not sure to understand youy problem: everything works fine when you are using Developpment system (Active Version 8.5) but, do you have this error when you set the adapter to LabVIEW Run-Time Engine 8.5, right? Are LabVIEW and/or VIs used in your sequence open when you run your sequence in Run-Time mode?
Cordially,
.mrLeft{float:left} .mrInfo{border-left:solid 1px #989898;font-size:x-small;color:#989898}
Mathieu R.
  CTD - Certified TestStand Developer / Développeur TestStand Certifié
  CLAD - Certified LabVIEW Associate Developer

Pipe Line Steps not executing

Hello Experts,
I am facing stage issue with PI Server,when i am executing scenario it showing black/white flag in MONI,my mapping part/development perfect.
but its not giving target pay load.Pipeline steps also not executing.
its new PI 7.1 server,do i need to configure any settings??
any help highly appreciated.
Regards,
James

In the border level please use below steps to check if you Integration Engine Configuration is as per requirements
Logon to PI
Use transaction SXMB_ADM
Choose Integration Engine Configuration
Ensure Role of Business System set to 'Integration Server'
Ensure Corresponding Integ. Server set to http://<hostname:<http port>/sap/xi/engine?type=entry
Then, click on 'Configuration' (pencil icon) button
Ensure RUNTIME (Category); IS_URL (Parameter) has currently value set to http://<hostname:<http port>/sap/xi/engine?type=entry
Please check if your INTEGRATION_DIRECTORY_HMI rfc working fine.
Regards
Sekhar

SSIS Script task not executing macro through SQL Agent (but it does through bids)

Hello everyone,I am having an issue with SQL Agent when executing a macro contained in a script task component. The script task actually opens an excel file, runs the macro, save and closes the file. When
I execute the package via BIDS/Visual studio, it works like a charm. However, when i execute the package with SQL agent, the package runs successfully but it seems that the macro is not executed as the excel file has not been modified as it should have. Also,
the history log does not show any error messages. Could 

Thanks!I did create a credential and a proxy too but still the macro is not executed.I have searched online for solutions but no one has experimented this kind of issue before it seems. Please have a look at the script task code:
Imports
Excel = Microsoft.Office.Interop.Excel
Imports
System
Imports
System.Data
Imports
System.Math
Imports
Microsoft.SqlServer.Dts.Runtime
<System.AddIn.AddIn(
"ScriptMain", Version:="1.0",
Publisher:="", Description:="")>
<System.CLSCompliantAttribute(
False)> _
Partial
Public
Class ScriptMain
Inherits Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
Enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
End
Enum
Public
Sub Main()
Dim Macro_name
As
String
Dim ExcelObject
As
New Microsoft.Office.Interop.Excel.Application
Dim oBook
As Microsoft.Office.Interop.Excel.Workbook
Dim oBooks
As Microsoft.Office.Interop.Excel.Workbooks
Try
Macro_name =
"Macro001"
ExcelObject =
CType(CreateObject("Excel.Application"),
Excel.Application)
ExcelObject.Visible =
True
ExcelObject.UserControl =
False
ExcelObject.DisplayAlerts =
False
oBooks = ExcelObject.Workbooks
oBook =
CType(oBooks.Open("C\Book1.xls"),
Excel.WorkbookClass)
ExcelObject.Run(Macro_name)
Catch ex
As Exception
ExcelObject.Application.Quit()
ExcelObject.DisplayAlerts =
True
ExcelObject =
Nothing
End
Try
Dts.TaskResult = ScriptResults.Success
End
Sub
End
Class

SAP PI 7.1 Mapping resource not found

Hello Gururs,
We have been experiencing the issue on our QA SAP PI system after upgrade to 7.1 eHP1.
We just imported new set of components under new SWCV and namespace. While trying to process the message, getting below error. I already checked all system accounts and every thing looks Good. Performed full SXI_ CACHE and CPACACHE. Also performed the steps given in note 764176. Any suggestions would be appreciated
Runtime error
Unable to find resource 46c20a71-248e-11dc-c4be-dd500a115642 in the following software component versions: http://sap.com/xi/SNC/GlobalZ_OrdersOrders05_ReplenishmentOrderNotification_0~-1
Unable to find resource Z_OrdersOrders05_ReplenishmentOrderNotification_02.xsl in the following software component versions: 46c20a71-248e-11dc-c4be-dd500a115642 Thrown:

I tried this option still same error.
I think this is what happening from error message.
1. ABAP runtime is able to identify and locate Operations mapping.
2. ABAP determined it as xsl mapping so made call to Java runtime for execution.
3. Java runtime is not able to locate the xsl map in runtime cache.
4. I can see this map in SXI_CACHE
5. These set of newly deployed maps are not there in cache monitoring from RWB which shows java runtime doesn't have these objects in cache.
Again appreciate if you have any other ideas.

Mapping is not executed in runtime

Similar Messages

Maybe you are looking for