NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache

Hi,
I have a SOAP to RFC scenario. Where the source is a service interface and target is ZBAPI. When I test this interface I get
'NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache' error.
I have tried the following things but none worked.
1. Checked the Message Mappings and reimported it in the Operation Mapping.
2. Deleted and created the Operation Mapping again.
3. Cleared the SLD Cache.
4. Performed the Complete Cache Refresh from SXI_CACHE.
5. Reimported the ZBAPI.
6. Deleted all the IR and ID objects and created it once again after performing the Cache refresh.
Note: I had one observation that the newly created Operation Mapping object had the same object ID as that of the deleted one.

Hi experts,
I have a SOAP to RFC scenario. Where the source is a service interface and target is ZBAPI. When I test this interface I get
'NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache : Object ID <ID of Operation Mapping>' error.
I have tried the following things but none worked.
1. Checked the Message Mappings and reimported it in the Operation Mapping.
2. Deleted and created the Operation Mapping again.
3. Cleared the SLD Cache.
4. Performed the Complete Cache Refresh from SXI_CACHE.
5. Reimported the ZBAPI.
6. Deleted all the IR and ID objects and created it once again after performing the Cache refresh.
Note: I had one observation that the newly created Operation Mapping object had the same object ID as that of the deleted one.
The ZBAPI is a wrapper for a standard BAPI with Request, Response and Exception as a structure.
Can anyone please highlight on the above issue also please consider the note above.
Regards,
Rohit.

Similar Messages

Interface mapping Object does not exist in runtime cache

I am getting the following error after importing IR into our test system (PI7.0 SP10).
Interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 does not exist in runtime cache Exception of class CX_XMS_SYSERR_MAPPING
You want to execute interface mapping Object ID 19C3AC9D13B03787AEEB85169D0B6900 Software Component 8C51B2209F3C11DB94CEEB180DDF0074 .     However,the data of this interface mapping is missing in the runtime cache. Activate the interface mapping in the Integration Repository.
I cannot change the mapping and reactivate - as this cannot be changed.
I have run SXI_Cache, Cleared SLD caches on IR and ID and run cacherefresh=full, but no luck!
The mapping is there and I can test it in the IR.
Any thoughts?

I had this problem today, maybe this helps someone when searching about this (at least this is the first hit at a very big search engine when searching for interface mapping does not exist...)
I have a RFC => PI => File scenario. I was aware that this would need to be asynchronous so I set up the message interface (service interface for PI > 7.0) as asynchronous inbound. This is the file receiver part of the interface.
Hints on the error: Audit Log in message details of RWB showed a line like this: RFC adapter received sRFC for ZMY_FM from <sender SID>/<sender client>. Attempting to send message synchronously. This of course could not work as file is asynchronous by default.
Bottom line however was, to make the call of the sender RFC asynchronous by using "in background task" like so:
CALL FUNCTION 'ZMY_FM'
   IN BACKGROUND TASK
   DESTINATION 'PI_DEST'
   EXPORTING
     t_file = lt_file.
COMMIT WORK.
Don't forget the commit work here.
Hope this helps.
Cheers
Jens

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

Interface Mapping does not exist in runtime cache

Hi,
I have a scenario of RFC to SOAP, when I do the test I get the error message "Interface mapping http://sapxi.xxx.co.za/XXXXXX/ InterfaceMapping_Name does not exist in runtime cache"
Regards
Scharlotte

Hi...
Try to re-create the Interface mapping.
And also test your Configuration with test tool where you can find the error on which step.
if the error found in interface mapping.. do re-create the interface determination step and receiver agreement.
Provide the payload which is taken from sxmb_moni --> Inbound msg --> Payload
u can follow this blog for how to test configuration part:
Test Your XI Configuration With The New Test Tool
Regards,
Parvathy

Error : Interface mapping does not exist in runtime Cache

Hello Guys
I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
but the data is not getting transfered from one point to another.
I checked SXMB_MONI and saw the following error:
Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
But still has the same problem.
Can some one help me with this? I would really appreciate it.
Thanks
Ram

Hi,
We too faced the same problem.
Do the following
1) Delete the Interface mapping and re-create it
2) First test your Config with test tool
/people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
I think here you will find the error on Interface mapp or Receiver agreement
Then delete the interface det and receiver agreement also and re-create those.
Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
Then finally u will get the success
Regards
Seshagiri

HT5429 i m using iphone 4s . when i try to set direction that time i get one error like the map server is not available . will you help me ?

i m using iphone 4s . when i try to set direction that time i get one error like the map server is not available . will you help me ?
how to help this problem..?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Interface mapping Object doesn't exist in runtime cache

Hi SDN,
Now I am trying to finish a senario that Getting an IDOC of R/3 into a file by XI. I can get the xml message by tcode IDX5, but always get the following error infromation by IDX5:
===============
Interface mapping Object ID E4815D26AD5B35D2B89A5557DBE045E7 Software Component 2F1990F0E66D11DB9DC2C239C0A8007A does not exist in runtime cache
===============
What happens?
Thanks for your time ahead!
Bruce

HI,
See the below links
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards
Chilla

Mapped Drive - Location Not Available

I have a small recurring problem that is starting to get a little bit bigger.
My environment is:
Server 2012 Standard, AD, File Server, Print Server. Running on Hyper-V (2008)
Clients are Windows XP, Vista, 7, and 8.1 all professional.
I have a number of mapped drives that all go to this same file server. If I open a Windows Explorer window on any client and leave it open, after a while (always seams random), I will eventually get an error message saying "Location Not Available"
The contents of the directory I was looking at goes blank when this message comes up. I can click OK and immediately hit refresh on the Explorer window and the contents will come back.
Most of the time this is annoying but I am finding a couple of applications that do not like this behavior. They crash or close connections when this happens.
I have had a Remote Desktop connection open to this server while getting this and it does not get disconnected. I do not see anything that looks related at all in the log files of the client, the server or the Hyper-V host. I have made sure that the drivers
on Hyper-V are up to date as well as all firmware (especially the network cards).
I am not sure if the problem started when I upgraded my personal workstation to Windows 8 (from 7) but that is when I first started to notice this.

Hi,
Do you mean the issue only occurs on Windows 8 systems?
Also whether these mapped folders are DFS shares or just normal shared folder?
If DFS is involved, test to disable Client Side Caching to see if it is related. Please add this key in all DFS target servers.
HKLM\System\CCS\Services\LanmanServer value=<sharename> cscflags=48
As it is a random issue, it will be difficult to find out the root case. You can try to capture a network trace with Network Monitor when the issue occurs. Let's see if any specific information could be found.
Detailed steps could be found:
http://support.microsoft.com/kb/812953
Note: As the issue occurs randomly, the package may be large as you need to wait until the issue occurs.
Note2: you can upload package to OneDrive however as is open to public so everyone could see that package.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

XI 2.0 Mapping Program Archive not imported

Hi,
I am working on XI 2.0 and using XSLT programs within a WinZip archive. I have tested the mapping program outside of XI and all is OK/Well formed etc, but when I try to import the ZIP file containing the xsl template the imported archive is empty so that I do not see any mapping programs in the list of files within the archive. I have tried then exporting the imported archive as a new zip file on the o/s and it contains the correct mapping programs.
I have re-started the XI box and still have nothing working.
Please help..
Mark

Hi Theo,
yes the mapping program is xsl. I have sorted it out now, by simply re-starting XI and the local pc running the Java WebStart.
Dont understand what the problem was, as I cannot now replicate it.. but thanks anyway..
Cheers,
Mark

Re: 13 in. MBP 2012 OS X Mavericks Maps (DIRECTIONS are not available)

Iam in Dubai UAE, i have 13 in MBP 2012 with OS X Mavericks.
I cannot get directions in using the app MAPS?
What do i need to do on my mac?
Is anybody experiencing the same error i get on getting directions using the MAPS in Mavericks?

my same problem (re-post quote)
need your response guys..iam using MBP 13 in 2012 2.5 Ghz 8Gb RAM INTEL HD4000 500Gb Hard Drive.
iam currently in DUBAI, UAE
Hi i would like to get an answer from these community,as iam having an error message like these below:
Although i have clearly specified a start and end location.
Directions are not available.
A route to the nearest road cannot be determined.
# I would like to have an answer from the above issue i have.

HT5429 unable to use MAPs in india as well as Middle east - When I try it gives pop up message - cannot provide directions. The map server is not available

unable to use MAPs in india as well as Middle east - When I try it gives pop up message - cannot provide directions. The map server is not available

Here:
http://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US

Abap mapping "How to" not available, can you send me the pdf?

Hello,
I need information about ABAP Mapping and all the posts about that kind of mapping have a link to the sdn guide "How to Use ABAP Mapping in Exchange Infrastructure 3.0" --> https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
But that link is broken , is there any way that you can send me that file if you got it?

Hi Marshal,
Start with this...........
/people/ravikumar.allampallam/blog/2005/02/10/different-types-of-mapping-in-xi
This document will help you to create ABAP Mapping .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20abap-mapping%20in%20xi%203.0.pdf
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping

Map in iMovie not available in dutch

When I change Mac language in English, I have maps in iMovie.
Language Dutch: no maps.
In version before latest, no problem in Dutch.

Npraat wrote:
... When I change Mac language in English, I have maps in iMovie.
Language Dutch: no maps.
.. and in Dutch (or Spanish) you miss half of the backgrounds, for instance 'Black'
Bug is well-known, and I really don't understand, why that wasn't fixed in the last update...
Workaround:
• set iMovie to English (here: German), a very handy tool doing that is
Language Switcher
it allows to set individual apps to a different language than the System
• apply your maps, quit iM
• relaunch in Dutch ...
as you can see: Project in German => maps, relaunched in Dutch: no maps in Browser, but in Project fully functional ..
a real nasty bug ....
don't miss to give feedback to Apple! >>>
http://www.apple.com/feedback/imovie.html

TS1702 Map Street view not available since upgrade

Map changed after the os upgrade, can it be reverted\/

Sorry, no. There is no street view in iOS 6.0 maps.

Value Mapping Tables are not updated in RWB cache

Hi Friends,
I am doing value mapping replication from SAP.
I am following
/people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
1)
I didnt changed ABAP proxy of ValueMappingReplicationOut in SAP system.
is anything to... its already in Active state
2)I used ABAP report to call proxy in SAP system.
while debugging ,I come to know that values are populating in the structure svmr_value_mapping_replication in proxy.
3) activated Java inbound proxy (async).I got respose like
Interface http://sap.com/xi/XI/System#ValueMappingReplication registered with value localejbs/sap.com/com.sap.xi.services/ValueMappingApplication:valueMappingReplication
4) No message Mapping .because sender and receive using same message type ValueMappingReplication in http://sap.com/xi/XI/System of SAP BASIS 7.00.
4) I didnt done Sender agreement because of sender is SAP here.
6) In receiver communication channel i follwed help.sap.com
i used PIAPPLUSER
7)
but I am not getting values in RWB Cache.
8) i didnt find any message in sxmb_moni
8) I did cashe refresh and CPA cache refresh too..
correct me please..
suggest the relevent
regards
Ram

Hi Sarvesh,
Thanks for your responses.
Now RWB ValueMapping Table is updating.
I tried my luck with Single row of Target and Source values.
I am lucky.
Now I tried my luck more than One row..But I am not getting values the way I required.
Please have a look in below screenshot from RWB.
[http://www.imagehosting.com/show.php/1735277_ValueMapping.jpg.html]
I am getting the first Taget value for all Target avlues.
In Details Tab,It is showing all the values of source and target values.
In my observation,It should show only one source value details.[http://www.imagehosting.com/show.php/1735286_Valuemapping1.Jpg.html]
Please guide me.
Is ther any necessary to change Abap report logic.
my abap logic look like this.
data: lcl_value_mapping type ref to co_svmr_value_mapping_rep,
ls_value_mappings type svmr_value_mapping_replication,
ls_item type svmr_value_mapping_rep_item,
lcl_system_fault type ref to cx_ai_system_fault.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123544'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'OTDVendor'.
ls_item-identifier-agency = 'OTD'.
ls_item-identifier-value = '111'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123544'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'SAPVendor'.
ls_item-identifier-agency = 'SAP'.
ls_item-identifier-value = 'XXX'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
create object lcl_value_mapping.
try.
call method lcl_value_mapping->execute_asynchronous
exporting
output = ls_value_mappings.
commit work and wait.
if sy-subrc = 0.
WRITE : 'Value Mapping Executed and Values sent to XI system'.endif.
catch cx_ai_system_fault into lcl_system_fault.
write: 'Error: ', lcl_system_fault->errortext.
endtry.
clear ls_value_mappings-value_mapping_replication-item[].
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123544'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'OTDVendor'.
ls_item-identifier-agency = 'OTD'.
ls_item-identifier-value = '222'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
ls_item-operation = 'Insert'.
ls_item-group_id = '315286378563858425463215845123544'.
ls_item-context = 'http://Test'.
ls_item-identifier-scheme = 'SAPVendor'.
ls_item-identifier-agency = 'SAP'.
ls_item-identifier-value = 'YYY'.
append ls_item to ls_value_mappings-value_mapping_replication-item.
try.
call method lcl_value_mapping->execute_asynchronous
exporting
output = ls_value_mappings.
commit work and wait.
if sy-subrc = 0.
WRITE : 'Value Mapping Executed and Values sent to XI system'.endif.
catch cx_ai_system_fault into lcl_system_fault.
write: 'Error: ', lcl_system_fault->errortext.
endtry.
Regards
Ram

NO_MAPPINGPROGRAM_FOUND : Mapping program is not available in runtime cache

Similar Messages

Maybe you are looking for